| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"More fixes, some of them going back to older releases and there are
fixes for hangs in stress tests regarding space caching:
- fixes and progress tracking for hangs in free space caching, found
by test generic/475
- writeback fixes, write pages in integrity mode and skip writing
pages that have been written meanwhile
- properly clear end of extent range after an error
- relocation fixes:
- fix race betwen qgroup tree creation and relocation
- detect and report invalid reloc roots"
* tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set cache_block_group_error if we find an error
btrfs: reject invalid reloc tree root keys with stack dump
btrfs: exit gracefully if reloc roots don't match
btrfs: avoid race between qgroup tree creation and relocation
btrfs: properly clear end of the unreserved range in cow_file_range
btrfs: don't wait for writeback on clean pages in extent_write_cache_pages
btrfs: don't stop integrity writeback too early
btrfs: wait for actual caching progress during allocation
|
|
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_OVERLAY_FS_DEBUG is enabled add an explicit check to make
sure that OVL_FS() is always used with a valid overlayfs superblock.
Otherwise trigger a WARN_ON_ONCE().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Always use OVL_FS() to retrieve the corresponding struct ovl_fs from a
struct super_block.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Provide a Kconfig option to enable extra debugging checks for overlayfs.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Add a new mount option uuid=auto, which is the default.
If a persistent UUID xattr is found it is used.
Otherwise, an existing ovelrayfs with copied up subdirs in upper dir
that was never mounted with uuid=on retains the null UUID.
A new overlayfs with no copied up subdirs, generates the persistent UUID
on first mount.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
With uuid=on, store a persistent uuid in xattr on the upper dir to
give the overlayfs instance a persistent identifier.
This also makes f_fsid persistent and more reliable for reporting
fid info in fanotify events.
uuid=on is not supported on non-upper overlayfs or with upper fs
that does not support xattrs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The legacy behavior of ovl_statfs() reports the f_fsid filled by
underlying upper fs. This fsid is not unique among overlayfs instances
on the same upper fs.
With mount option uuid=on, generate a non-persistent uuid per overlayfs
instance and use it as the seed for f_fsid, similar to tmpfs.
This is useful for reporting fanotify events with fid info from different
instances of overlayfs over the same upper fs.
The old behavior of null uuid and upper fs fsid is retained with the
mount option uuid=null, which is the default.
The mount option uuid=off that disables uuid checks in underlying layers
also retains the legacy behavior.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
When all layers support file handles, we support encoding non-decodable
file handles (a.k.a. fid) even with nfs_export=off.
When file handles do not need to be decoded, we do not need to copy up
redirected lower directories on encode, and we encode also non-indexed
upper with lower file handle, so fid will not change on copy up.
This enables reporting fanotify events with file handles on overlayfs
with default config/mount options.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
During regular metacopy, if lowerdata file has fs-verity enabled, and
the verity option is enabled, we add the digest to the metacopy xattr.
If verity is required, and lowerdata does not have fs-verity enabled,
fall back to full copy-up (or the generated metacopy would not
validate).
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The new digest field in the metacopy xattr is used during lookup to
record whether the header contained a digest in the OVL_HAS_DIGEST
flags.
When accessing file data the first time, if OVL_HAS_DIGEST is set, we
reload the metadata and check that the source lowerdata inode matches
the specified digest in it (according to the enabled verity
options). If the verity check passes we store this info in the inode
flags as OVL_VERIFIED_DIGEST, so that we can avoid doing it again if
the inode remains in memory.
The verification is done in ovl_maybe_validate_verity() which needs to
be called in the same places as ovl_maybe_lookup_lowerdata(), so there
is a new ovl_verify_lowerdata() helper that calls these in the right
order, and all current callers of ovl_maybe_lookup_lowerdata() are
changed to call it instead.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Historically overlay.metacopy was a zero-size xattr, and it's
existence marked a metacopy file. This change adds a versioned header
with a flag field, a length and a digest. The initial use-case of this
will be for validating a fs-verity digest, but the flags field could
also be used later for other new features.
ovl_check_metacopy_xattr() now returns the size of the xattr,
emulating a size of OVL_METACOPY_MIN_SIZE for empty xattrs to
distinguish it from the no-xattr case.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
This adds the scaffolding (docs, config, mount options) for supporting
the new digest field in the metacopy xattr. This contains a fs-verity
digest that need to match the fs-verity digest of the lowerdata
file. The mount option "verity" specifies how this xattr is handled.
If you enable verity ("verity=on") all existing xattrs are validated
before use, and during metacopy we generate verity xattr in the upper
metacopy file (if the source file has verity enabled). This means
later accesses can guarantee that the same data is used.
Additionally you can use "verity=require". In this mode all metacopy
files must have a valid verity xattr. For this to work metadata
copy-up must be able to create a verity xattr (so that later accesses
are validated). Therefore, in this mode, if the lower data file
doesn't have fs-verity enabled we fall back to a full copy rather than
a metacopy.
Actual implementation follows in a separate commit.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
When the kernfs_iattr_rwsem was introduced a case was missed.
The update of the kernfs directory node child count was also protected
by the kernfs_rwsem and needs to be included in the change so that the
child count (and so the inode n_link attribute) does not change while
holding the rwsem for read.
Fixes: 9caf69614225 ("kernfs: Introduce separate rwsem to protect inode attributes.")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-By: Imran Khan <imran.f.khan@oracle.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Eric Sandeen <sandeen@sandeen.net>
Link: https://lore.kernel.org/r/169128520941.68052.15749253469930138901.stgit@donald.themaw.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- The switch to using iomap for executing a direct synchronous write to
sequential files using a zone append BIO overlooked cases where the
BIO built by iomap is too large and needs splitting, which is not
allowed with zone append.
Fix this by using regular write commands instead. The use of zone
append commands will be reintroduced later with proper support from
iomap.
* tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix synchronous direct writes to sequential files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 11 of these are cc:stable and the remainder address
post-6.4 issues, or are not considered suitable for -stable
backporting"
* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/core: initialize damo_filter->list from damos_new_filter()
nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
selftests: cgroup: fix test_kmem_basic false positives
fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
MAINTAINERS: add maple tree mailing list
mm: compaction: fix endless looping over same migrate block
selftests: mm: ksm: fix incorrect evaluation of parameter
hugetlb: do not clear hugetlb dtor until allocating vmemmap
mm: memory-failure: avoid false hwpoison page mapped error info
mm: memory-failure: fix potential unexpected return value from unpoison_memory()
mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
radix tree test suite: fix incorrect allocation size for pthreads
crypto, cifs: fix error handling in extract_iter_to_sg()
zsmalloc: fix races between modifications of fullness and isolated
|
|
Use the generic fs_holder_ops to shut down the file system when the
log or RT device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the xfs log and RT devices to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export fs_holder_ops so that file systems that open additional block
devices can use it as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs_mark_dead currently uses get_super to find the superblock for the
block device that is going away. This means it is limited to the
main device stored in sb->s_dev, leading to a lot of code duplication
for file systems that can use multiple block devices.
Now that the holder for all block devices used by file systems is set
to the super_block, we can instead look at that holder and then check
if the file system is born and active, so do that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_block instead
which is useful when passed back to the file system driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Beyond enabling the FS_MGTIME flag, this patch eliminates
update_time_for_write, which goes to great pains to avoid in-memory
stores. Just have it overwrite the timestamps unconditionally.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-13-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
For ext4, we only need to enable the FS_MGTIME flag.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-12-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Also, anytime the mtime changes, the ctime must also change, and those
are now the only two options for xfs_trans_ichgtime. Have that function
unconditionally bump the ctime, and ASSERT that XFS_ICHGTIME_CHG is
always set.
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-11-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot metadata updates, down to around 1 per jiffy,
even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried.
POSIX generally mandates that when the the mtime changes, the ctime must
also change. The kernel always stores normalized ctime values, so only
the first 30 bits of the tv_nsec field are ever used.
Use the 31st bit of the ctime tv_nsec field to indicate that something
has queried the inode for the mtime or ctime. When this flag is set,
on the next mtime or ctime update, the kernel will fetch a fine-grained
timestamp instead of the usual coarse-grained one.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Later patches will convert individual filesystems to use the new
infrastructure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-9-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that all of the update_time operations are prepared for it, we can
drop the timespec64 argument from the update_time operation. Do that and
remove it from some associated functions like inode_update_time and
inode_needs_update_time.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-8-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches we're going to drop the "now" parameter from the
update_time operation. Prepare XFS for this by reworking how it fetches
timestamps and sets them in the inode. Ensure that we update the ctime
even if only S_MTIME is set.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-7-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to drop the "now" parameter from the
update_time operation. Fix fat_update_time to fetch its own timestamp.
It turns out that this is easily done by just passing a NULL timestamp
pointer to fat_truncate_time.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-2-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
commit 6bb885ecd746 (fat: add functions to update and truncate
timestamps appropriately") added an update_time routine for fat. That
patch added a section for handling the S_VERSION bit, even though FAT
doesn't enable SB_I_VERSION and the S_VERSION bit will never be set when
calling it.
Remove the section for handling S_VERSION since it's effectively dead
code, and will be problematic vs. future changes.
Cc: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-1-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to drop the "now" parameter from the
update_time operation. Prepare ubifs for this, by having it use the new
inode_update_timestamps helper.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-6-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Optimise the negative xattr lookup with bloom filter.
The bit value for the bloom filter map has a reverse semantics for
compatibility. That is, the bit value of 0 indicates existence, while
the bit value of 1 indicates the absence of corresponding xattr.
The initial version is _only_ enabled when xattr_filter_reserved is
zero. The filter map internals may change in the future, in which case
the reserved flag will be set non-zero and we don't need bothering the
compatible bits again at that time. For now disable the optimization if
this reserved flag is non-zero.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230722094538.11754-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The xattr name bloom filter feature is going to be introduced to speed
up the negative xattr lookup, e.g. system.posix_acl_[access|default]
lookup when running "ls -lR" workload.
There are some commonly used extended attributes (n) and the total
number of these is approximately 30.
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_type
Given the number of bits of the bloom filter (m) is 32, the optimal
value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)
where `index` represents the index of corresponding predefined short name
prefix, while `name` represents the name string after stripping the above
predefined name prefix.
The constant magic number EROFS_XATTR_FILTER_SEED, i.e. 0x25BBE08F, is
used to give a better spread when mapping these 30 extended attributes
into 32-bit bloom filter as:
bit 0: security.ima
bit 1:
bit 2: trusted.overlay.nlink
bit 3:
bit 4: user.overlay.nlink
bit 5: trusted.overlay.upper
bit 6: user.overlay.origin
bit 7: trusted.overlay.protattr
bit 8: security.apparmor
bit 9: user.overlay.protattr
bit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopy
h_name_filter is introduced to the on-disk per-inode xattr header to
place the corresponding xattr name filter, where bit value 1 indicates
non-existence for compatibility.
This feature is indicated by EROFS_FEATURE_COMPAT_XATTR_FILTER
compatible feature bit.
Reserve one byte in on-disk superblock as the on-disk format for xattr
name filter may change in the future. With this flag we don't need
bothering these compatible bits again at that time.
Suggested-by: Alexander Larsson <alexl@redhat.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230722094538.11754-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Add DEFLATE compression as the 3rd supported algorithm.
DEFLATE is a popular generic-purpose compression algorithm for quite
long time (many advanced formats like gzip, zlib, zip, png are all
based on that) as Apple documentation written "If you require
interoperability with non-Apple devices, use COMPRESSION_ZLIB. [1]".
Due to its popularity, there are several hardware on-market DEFLATE
accelerators, such as (s390) DFLTCC, (Intel) IAA/QAT, (HiSilicon) ZIP
accelerator, etc. In addition, there are also several high-performence
IP cores and even open-source FPGA approches available for DEFLATE.
Therefore, it's useful to support DEFLATE compression in order to find
a way to utilize these accelerators for asynchronous I/Os and get
benefits from these later.
Besides, it's a good choice to trade off between compression ratios
and performance compared to LZ4 and LZMA. The DEFLATE core format is
simple as well as easy to understand, therefore the code size of its
decompressor is small even for the bootloader use cases. The runtime
memory consumption is quite limited too (e.g. 32K + ~7K for each zlib
stream). As usual, EROFS ourperforms similar approaches too.
Alternatively, DEFLATE could still be used for some specific files
since EROFS supports multiple compression algorithms in one image.
[1] https://developer.apple.com/documentation/compression/compression_algorithm
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230810154859.118330-1-hsiangkao@linux.alibaba.com
|
|
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b7498 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently RCOM_STATUS and RCOM_NAMES inclusive their replies are being
used to determine the DLM version. The RCOM_NAMES messages are triggered
in DLM recovery when calling dlm_recover_directory() only. At this time
the DLM version need to be determined. I ran some tests and did not
expirenced some issues. When the DLM version detection was developed
probably I run once in a case of RCOM_NAMES and the version was not
detected yet. However it seems to be not necessary.
For backwards compatibility we still need to accept RCOM_NAMES messages
which are not protected regarding the DLM message reliability layer aka
stateless message. This patch changes that RCOM_NAMES we are sending out
after this patch are not stateless anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch puts the life of a midcomms node the same as a lowcomms
connection. The lowcomms connection lifetime was changed by commit
6f0b0b5d7ae7 ("fs: dlm: remove dlm_node_addrs lookup list"). In the
future the midcomms node instances can be merged with lowcomms
connection structure as the lifetime is the same and states can be
controlled over values or flags.
Before midcomms nodes were generated during version detection. This is
not necessary anymore when the nodes are created when the cluster
manager configures DLM via configfs. When a midcomms node is created over
configfs it well set DLM_VERSION_NOT_SET as version. This indicates that
the version of the midcomms node is still unknown and need to be probed
via certain rcom messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The dlm receive buffer should be never manipulated as DLM is the last
instance of parsing layer. This patch constify the whole receive buffer
so we are sure it never gets manipulated when it's being parsed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Currently dlm_recover_master_copy() manipulates the receive buffer of an
rcom lock message and modifies it on the fly so a later memcpy() to a
new rcom message with the same message has those new values. This patch
avoids manipulating the received rcom message by store the values for
the new rcom message in paremter assigned with call by reference. Later
when dlm_send_rcom_lock() constructs a new message and memcpy() the
receive buffer those values will be set on the new constructed message.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch removes the manipulation of the receive buffer in case of an
error and be sure the buffer is null terminated before an error
messagea is printed out. Instead of manipulate the receive buffer we
tell inside the format string the maximum length the string buffer is
being read.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch removes a read of the ls->ls_recover_seq uint64_t number in
_create_rcom(). If the ls->ls_recover_seq is readed the ls_recover_lock
need to held. However this number was always readed before when any rcom
message is received and it's not necessary to read it again from a per
lockspace variable to use it for the replying message. This patch will
pass the sequence number as parameter so another read of ls->ls_recover_seq
and holding the ls->ls_recover_lock is not required.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch cleanups the lock order to hold at first the close_lock and
then held the nodes_srcu read lock. Probably it will never be a problem
as nodes_srcu is only a read lock preventing the node pointer getting
freed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch is just a small cleanup to directly call
remove_remote_member() instead of going over clear_members_cb() which
just calls remove_remote_member().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
I currently debug nfs plock handling and introduce those two tracepoints
for getting more information about what is happening there if the user
space reads plock operations from kernel and writing the result back.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
To be sure we don't have any issues that there are leftover plock ops in
either send_list or recv_list we simple check if either one of the list
are empty when we exit the dlm subsystem.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
It was useful to debug an issue with the callback queue to check if any
callbacks in any lkb are for some reason not processed by the callback
workqueue. The mentioned issue was fixed by commit a034c1370ded ("fs:
dlm: fix DLM_IFL_CB_PENDING gets overwritten"). If there are similar
issue that looks like a ast callback was not processed, we can confirm
now that it is not sitting to be processed by the callback workqueue
anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The variable processed_nodes is not being used by commit 1696c75f1864
("fs: dlm: add send ack threshold and append acks to msgs"). This patch
removes the leftover of this commit.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch fixes commit dc52cd2eff4a ("fs: dlm: fix F_CANCELLK to cancel
pending request") that we don't unlock the ops_lock in a rate case when
a waiter cannot be found. This case can only happen when cancellation of
plock operation was successful but no kernel waiter was being found.
Fixes: dc52cd2eff4a ("fs: dlm: fix F_CANCELLK to cancel pending request")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
We set cache_block_group_error if btrfs_cache_block_group() returns an
error, this is because we could end up not finding space to allocate and
mistakenly return -ENOSPC, and which could then abort the transaction
with the incorrect errno, and in the case of ENOSPC result in a
WARN_ON() that will trip up tests like generic/475.
However there's the case where multiple threads can be racing, one
thread gets the proper error, and the other thread doesn't actually call
btrfs_cache_block_group(), it instead sees ->cached ==
BTRFS_CACHE_ERROR. Again the result is the same, we fail to allocate
our space and return -ENOSPC. Instead we need to set
cache_block_group_error to -EIO in this case to make sure that if we do
not make our allocation we get the appropriate error returned back to
the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
