| Age | Commit message (Collapse) | Author |
|---|
|
Pull ceph fixes from Ilya Dryomov:
"Three filesystem bug fixes, intended for stable"
* tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-client:
ceph: fix NULL pointer dereference for req->r_session
ceph: avoid putting the realm twice when decoding snaps fails
ceph: fix a NULL vs IS_ERR() check when calling ceph_lookup_inode()
MAINTAINERS: git://github.com -> https://github.com for ceph
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix another tracepoint crash
* tag 'nfsd-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix trace_nfsd_fh_verify_err() crasher
|
|
vfs_lock_file, vfs_test_lock and vfs_cancel_lock all take both a struct
file argument and a file_lock. The file_lock has a fl_file field in it
howevever and it _must_ match the file passed in.
While most of the locks.c routines use the separately-passed file
argument, some filesystems rely on fl_file being filled out correctly.
I'm working on a patch series to remove the redundant argument from
these routines, but for now, let's ensure that the callers always set
this properly by issuing a WARN_ON_ONCE if they ever don't match.
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
As of now only device names are printed out over __xfs_printk().
The device names are not persistent across reboots which in case
of searching for origin of corruption brings another task to properly
identify the devices. This patch add XFS UUID upon every mount/umount
event which will make the identification much easier.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
[sandeen: rebase onto current upstream kernel]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
When lazysbcount is enabled, fsstress and loop mount/unmount test report
the following problems:
XFS (loop0): SB summary counter sanity check failed
XFS (loop0): Metadata corruption detected at xfs_sb_write_verify+0x13b/0x460,
xfs_sb block 0x0
XFS (loop0): Unmount and run xfs_repair
XFS (loop0): First 128 bytes of corrupted metadata buffer:
00000000: 58 46 53 42 00 00 10 00 00 00 00 00 00 28 00 00 XFSB.........(..
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 69 fb 7c cd 5f dc 44 af 85 74 e0 cc d4 e3 34 5a i.|._.D..t....4Z
00000030: 00 00 00 00 00 20 00 06 00 00 00 00 00 00 00 80 ..... ..........
00000040: 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00 82 ................
00000050: 00 00 00 01 00 0a 00 00 00 00 00 04 00 00 00 00 ................
00000060: 00 00 0a 00 b4 b5 02 00 02 00 00 08 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 0c 09 09 03 14 00 00 19 ................
XFS (loop0): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply
+0xe1e/0x10e0 (fs/xfs/xfs_buf.c:1580). Shutting down filesystem.
XFS (loop0): Please unmount the filesystem and rectify the problem(s)
XFS (loop0): log mount/recovery failed: error -117
XFS (loop0): log mount failed
This corruption will shutdown the file system and the file system will
no longer be mountable. The following script can reproduce the problem,
but it may take a long time.
#!/bin/bash
device=/dev/sda
testdir=/mnt/test
round=0
function fail()
{
echo "$*"
exit 1
}
mkdir -p $testdir
while [ $round -lt 10000 ]
do
echo "******* round $round ********"
mkfs.xfs -f $device
mount $device $testdir || fail "mount failed!"
fsstress -d $testdir -l 0 -n 10000 -p 4 >/dev/null &
sleep 4
killall -w fsstress
umount $testdir
xfs_repair -e $device > /dev/null
if [ $? -eq 2 ];then
echo "ERR CODE 2: Dirty log exception during repair."
exit 1
fi
round=$(($round+1))
done
With lazysbcount is enabled, There is no additional lock protection for
reading m_ifree and m_icount in xfs_log_sb(), if other cpu modifies the
m_ifree, this will make the m_ifree greater than m_icount. For example,
consider the following sequence and ifreedelta is postive:
CPU0 CPU1
xfs_log_sb xfs_trans_unreserve_and_mod_sb
---------- ------------------------------
percpu_counter_sum(&mp->m_icount)
percpu_counter_add_batch(&mp->m_icount,
idelta, XFS_ICOUNT_BATCH)
percpu_counter_add(&mp->m_ifree, ifreedelta);
percpu_counter_sum(&mp->m_ifree)
After this, incorrect inode count (sb_ifree > sb_icount) will be writen to
the log. In the subsequent writing of sb, incorrect inode count (sb_ifree >
sb_icount) will fail to pass the boundary check in xfs_validate_sb_write()
that cause the file system shutdown.
When lazysbcount is enabled, we don't need to guarantee that Lazy sb
counters are completely correct, but we do need to guarantee that sb_ifree
<= sb_icount. On the other hand, the constraint that m_ifree <= m_icount
must be satisfied any time that there /cannot/ be other threads allocating
or freeing inode chunks. If the constraint is violated under these
circumstances, sb_i{count,free} (the ondisk superblock inode counters)
maybe incorrect and need to be marked sick at unmount, the count will
be rebuilt on the next mount.
Fixes: 8756a5af1819 ("libxfs: add more bounds checking to sb sanity checks")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Clean up resources if resetting the dotdot entry doesn't succeed.
Observed through code inspection.
Fixes: 5838d0356bb3 ("xfs: reset child dir '..' entry when unlinking child")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
|
|
Metadata files (e.g. realtime bitmaps and quota files) do not show up in
the bulkstat output, which means that scrub-by-handle does not work;
they can only be checked through a specific scrub type. Therefore, each
scrub type calls xchk_metadata_inode_forks to check the metadata for
whatever's in the file.
Unfortunately, that function doesn't actually check the inode record
itself. Refactor the function a bit to make that happen.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
We can handle files that are exactly s_maxbytes bytes long; we just
can't handle anything larger than that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
CoW forks only exist in memory, which means that they can only ever have
an incore extent tree. Hence they must always be FMT_EXTENTS, so check
this when we're scrubbing them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Ensure that extents in an inode's CoW fork are not marked as shared in
the refcount btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Teach scrub to flag quota files containing unwritten extents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Enhance the block map scrubber to check delayed allocation reservations.
Though there are no physical space allocations to check, we do need to
make sure that the range of file offsets being mapped are correct, and
to bump the lastoff cursor so that key order checking works correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
When scrub is checking file fork mappings against rmap records and
the rmap record starts before or ends after the bmap record, check the
adjacent bmap records to make sure that they're adjacent to the one
we're checking. This helps us to detect cases where the rmaps cover
territory that the bmaps do not.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
sparse complains that we can return an uninitialized error from this
function and that pag could be uninitialized. We know that there are no
zero-AG filesystems and hence we had to call xchk_bmap_check_ag_rmaps at
least once, so this is not actually possible, but I'm too worn out from
automated complaints from unsophisticated AIs so let's just fix this and
move on to more interesting problems, eh?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Teach the summary count checker to count the number of free realtime
extents and compare that to the superblock copy.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If any part of the per-AG summary counter scan loop aborts without
collecting all of the data we need, the scrubber's observation data will
be invalid. Set the incomplete flag so that we abort the scrub without
reporting false corruptions. Document the data dependency here too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
xfs_rtalloc_query_range scans the realtime bitmap file in order of
increasing file offset, so this caller can take ILOCK_SHARED on the rt
bitmap inode instead of ILOCK_EXCL. This isn't going to yield any
practical benefits at mount time, but we'd like to make the locking
usage consistent around xfs_rtalloc_query_all calls. Make all the
places we do this use the same xfs_ilock lockflags for consistency.
Fixes: 4c934c7dd60c ("xfs: report realtime space information via the rtbitmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
It turns out that GETFSMAP and online fsck have had a bug for years due
to their use of ILOCK_SHARED to coordinate their linear scans of the
realtime bitmap. If the bitmap file's data fork happens to be in BTREE
format and the scan occurs immediately after mounting, the incore bmbt
will not be populated, leading to ASSERTs tripping over the incorrect
inode state. Because the bitmap scans always lock bitmap buffers in
increasing order of file offset, it is appropriate for these two callers
to take a shared ILOCK to improve scalability.
To fix this problem, load both data and attr fork state into memory when
mounting the realtime inodes. Realtime metadata files aren't supposed
to have an attr fork so the second step is likely a nop.
On most filesystems this is unlikely since the rtbitmap data fork is
usually in extents format, but it's possible to craft a filesystem that
will by fragmenting the free space in the data section and growfsing the
rt section.
Fixes: 4c934c7dd60c ("xfs: report realtime space information via the rtbitmap")
Also-Fixes: 46d9bfb5e706 ("xfs: cross-reference the realtime bitmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If we tried to repair something but the repair failed with -EDEADLOCK,
that means that the repair function couldn't grab some resource it
needed and wants us to try again. If we try again (with TRY_HARDER) but
still can't get all the resources we need, the repair fails and errors
remain on the filesystem.
Right now, repair returns the -EDEADLOCK to the caller as -EFSCORRUPTED,
which results in XFS_SCRUB_OFLAG_CORRUPT being passed out to userspace.
This is not correct because repair has not determined that anything is
corrupt. If the repair had been invoked on an object that could be
optimized but wasn't corrupt (OFLAG_PREEN), the inability to grab
resources will be reported to userspace as corrupt metadata, and users
will be unnecessarily alarmed that their suboptimal metadata turned into
a corruption.
Fix this by returning zero so that the results of the actual scrub will
be copied back out to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Repair functions will not return EAGAIN -- if they were not able to
obtain resources, they should return EDEADLOCK (like the rest of online
fsck) to signal that we need to grab all the resources and try again.
Hence we don't need to deal with this case except as a debugging
assertion.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If the scrub process is sent a fatal signal while we're checking dquots,
the predicate for this will set the error code to -EINTR. Don't then
squash that into -ECANCELED, because the wrong errno turns up in the
trace output.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If the program calling online fsck is terminated with a fatal signal,
bail out to userspace by returning EINTR, not EAGAIN. EAGAIN is used by
scrubbers to indicate that we should try again with more resources
locked, and not to indicate that the operation was cancelled. The
miswiring is mostly harmless, but it shows up in the trace data.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Convert all the online scrub code to use the Linux slab allocator
functions directly instead of going through the kmem wrappers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Initialize the check_owner list head so that we don't corrupt the list.
Reduce the scope of the object pointer.
Fixes: 858333dcf021 ("xfs: check btree block ownership with bnobt/rmapbt when scrubbing btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Memory allocation usage is the same throughout online fsck -- we want
kernel memory, we have to be able to back out if we can't allocate
memory, and we don't want to spray dmesg with memory allocation failure
reports. Standardize the GFP flag usage and document these requirements.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Teach the AGFL repair function to check each block of the proposed AGFL
against the rmap btree. If the rmapbt finds any mappings that are not
OWN_AG, strike that block from the list.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Currently, the only way to lock an allocation group is to hold the AGI
and AGF buffers. If a repair needs to roll the transaction while
repairing some AG metadata, it maintains that lock by holding the two
buffers across the transaction roll and joins them afterwards.
However, repair is not like other parts of XFS that employ the bhold -
roll - bjoin sequence because it's possible that the AGI or AGF buffers
are not actually dirty before the roll. This presents two problems --
First, we need to redirty those buffers to keep them moving along in the
log to avoid pinning the log tail. Second, a clean buffer log item can
detach from the buffer. If this happens, the buffer type state is
discarded along with the bli and must be reattached before the next time
the buffer is logged. If it is not, the logging code will complain and
log recovery will not work properly.
An earlier version of this patch tried to fix the second problem by
re-setting the buffer type in the bli after joining the buffer to the
new transaction, but that looked weird and didn't solve the first
problem. Instead, solve both problems by logging the buffer before
rolling the transaction.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
While scrubbing an allocation group, we don't need to hold the AGFL
buffer as part of the scrub context. All that is necessary to lock an
AG is to hold the AGI and AGF buffers, so fix all the existing users of
the AGFL buffer to grab them only when necessary.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
While running the online fsck test suite, I noticed the following
assertion in the kernel log (edited for brevity):
XFS: Assertion failed: 0, file: fs/xfs/xfs_health.c, line: 571
------------[ cut here ]------------
WARNING: CPU: 3 PID: 11667 at fs/xfs/xfs_message.c:104 assfail+0x46/0x4a [xfs]
CPU: 3 PID: 11667 Comm: xfs_scrub Tainted: G W 5.19.0-rc7-xfsx #rc7 6e6475eb29fd9dda3181f81b7ca7ff961d277a40
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:assfail+0x46/0x4a [xfs]
Call Trace:
<TASK>
xfs_dir2_isblock+0xcc/0xe0
xchk_directory_blocks+0xc7/0x420
xchk_directory+0x53/0xb0
xfs_scrub_metadata+0x2b6/0x6b0
xfs_scrubv_metadata+0x35e/0x4d0
xfs_ioc_scrubv_metadata+0x111/0x160
xfs_file_ioctl+0x4ec/0xef0
__x64_sys_ioctl+0x82/0xa0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This assertion triggers in xfs_dirattr_mark_sick when the caller passes
in a whichfork value that is neither of XFS_{DATA,ATTR}_FORK. The cause
of this is that xchk_directory_blocks only partially initializes the
xfs_da_args structure that is passed to xfs_dir2_isblock. If the data
fork is not correct, the XFS_IS_CORRUPT clause will trigger. My
development branch reports this failure to the health monitoring
subsystem, which accesses the uninitialized args->whichfork field,
leading the the assertion tripping. We really shouldn't be passing
random stack contents around, so the solution here is to force the
compiler to zero-initialize the struct.
Found by fuzzing u3.bmx[0].blockcount = middlebit on xfs/1554.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
If the returning value of SMB2_set_info_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0967e5457954 ("cifs: use a compound for setting an xattr")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
to_attr() in zonefs sysfs code is unused, which it causes a warning when
compiling with clang and W=1. Delete it to prevent the warning.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
When an IO error occurs, the function __zonefs_io_error() is used to
issue a zone report to obtain the latest zone information from the
device. This function gets a zone report for all zones used as storage
for a file, which is always 1 zone except for files representing
aggregated conventional zones.
The number of zones of a zone report for a file is calculated in
__zonefs_io_error() by doing a bit-shift of the inode i_zone_size field,
which is equal to or larger than the device zone size. However, this
calculation does not take into account that the last zone of a zoned
device may be smaller than the zone size reported by bdev_zone_sectors()
(which is used to set the bit shift size). As a result, if an error
occurs for an IO targetting such last smaller zone, the zone report will
ask for 0 zones, leading to an invalid zone report.
Fix this by using the fact that all files require a 1 zone report,
except if the inode i_zone_size field indicates a zone size larger than
the device zone size. This exception case corresponds to a mount with
aggregated conventional zones.
A check for this exception is added to the file inode initialization
during mount. If an invalid setup is detected, emit an error and fail
the mount (check contributed by Johannes Thumshirn).
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The return value of CIFSGetExtAttr is negative, should be checked
with -EOPNOTSUPP rather than EOPNOTSUPP.
Fixes: 64a5cfa6db94 ("Allow setting per-file compression via SMB2/3")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As this code confused Linus [1], pass the super_block as an argument to
fscrypt_put_master_key_activeref(). This removes the need to have the
back-pointer ->mk_sb, so remove that.
[1] https://lore.kernel.org/linux-fscrypt/CAHk-=wgud4Bc_um+htgfagYpZAnOoCb3NUoW67hc9LhOKsMtJg@mail.gmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221110082942.351615-1-ebiggers@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfx fixes from David Howells:
"Two fixes, affecting the functions that iterates over the pagecache
unmarking or unlocking pages after an op is complete:
- xas_for_each() loops must call xas_retry() first thing and
immediately do a "continue" in the case that the extracted value is
a special value that indicates that the walk raced with a
modification. Fix the unlock and unmark loops to do this.
- The maths in the unlock loop is dodgy as it could, theoretically,
at some point in the future end up with a starting file pointer
that is in the middle of a folio. This will cause a subtraction to
go negative - but the number is unsigned. Fix the maths to use
absolute file positions instead of relative page indices"
* tag 'netfs-fixes-20221115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Fix dodgy maths
netfs: Fix missing xas_retry() calls in xarray iteration
|
|
If the returning value of SMB2_close_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352d96f3acc6 ("cifs: multichannel: move channel selection above transport layer")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Most patches randomly fix error paths or corner cases in fscache mode
reported recently. One fixes an invalid access relating to fragments
on crafted images.
Summary:
- Fix packed_inode invalid access when reading fragments on crafted
images
- Add a missing erofs_put_metabuf() in an error path in fscache mode
- Fix incorrect `count' for unmapped extents in fscache mode
- Fix use-after-free of fsid and domain_id string when remounting
- Fix missing xas_retry() in fscache mode"
* tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix missing xas_retry() in fscache mode
erofs: fix use-after-free of fsid and domain_id string
erofs: get correct count for unmapped range in fscache mode
erofs: put metabuf in error path in fscache mode
erofs: fix general protection fault when reading fragment
|
|
Fix the dodgy maths in netfs_rreq_unlock_folios(). start_page could be
inside the folio, in which case the calculation of pgpos will be come up
with a negative number (though for the moment rreq->start is rounded down
earlier and folios would have to get merged whilst locked)
Alter how this works to just frame the tracking in terms of absolute file
positions, rather than offsets from the start of the I/O request. This
simplifies the maths and makes it easier to follow.
Fix the issue by using folio_pos() and folio_size() to calculate the end
position of the page.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/Y2SJw7w1IsIik3nb@casper.infradead.org/
Link: https://lore.kernel.org/r/166757988611.950645.7626959069846893164.stgit@warthog.procyon.org.uk/ # v2
|
|
netfslib has a number of places in which it performs iteration of an xarray
whilst being under the RCU read lock. It *should* call xas_retry() as the
first thing inside of the loop and do "continue" if it returns true in case
the xarray walker passed out a special value indicating that the walk needs
to be redone from the root[*].
Fix this by adding the missing retry checks.
[*] I wonder if this should be done inside xas_find(), xas_next_node() and
suchlike, but I'm told that's not an simple change to effect.
This can cause an oops like that below. Note the faulting address - this
is an internal value (|0x2) returned from xarray.
BUG: kernel NULL pointer dereference, address: 0000000000000402
...
RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs]
...
Call Trace:
netfs_rreq_assess+0xa6/0x240 [netfs]
netfs_readpage+0x173/0x3b0 [netfs]
? init_wait_var_entry+0x50/0x50
filemap_read_page+0x33/0xf0
filemap_get_pages+0x2f2/0x3f0
filemap_read+0xaa/0x320
? do_filp_open+0xb2/0x150
? rmqueue+0x3be/0xe10
ceph_read_iter+0x1fe/0x680 [ceph]
? new_sync_read+0x115/0x1a0
new_sync_read+0x115/0x1a0
vfs_read+0xf3/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Changes:
========
ver #2)
- Changed an unsigned int to a size_t to reduce the likelihood of an
overflow as per Willy's suggestion.
- Added an additional patch to fix the maths.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: George Law <glaw@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/166749229733.107206.17482609105741691452.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/166757987929.950645.12595273010425381286.stgit@warthog.procyon.org.uk/ # v2
|
|
btrfs_ioctl_get_subvol_info() frees the search path after the userspace
copy from the temp buffer @subvol_info. This can lead to a lock splat
warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_ioctl_ino_to_path() frees the search path after the userspace copy
from the temp buffer @ipath->fspath. Which potentially can lead to a lock
splat warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_ioctl_logical_to_ino() frees the search path after the userspace
copy from the temp buffer @inodes. Which potentially can lead to a lock
splat.
Fix this by freeing the path before we copy @inodes to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Syzbot reported the following lockdep splat
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Not tainted
------------------------------------------------------
syz-executor307/3029 is trying to acquire lock:
ffff0000c02525d8 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x54/0xb4 mm/memory.c:5576
but task is already holding lock:
ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock fs/btrfs/locking.c:134 [inline]
ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: btrfs_tree_read_lock fs/btrfs/locking.c:140 [inline]
ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: btrfs_read_lock_root_node+0x13c/0x1c0 fs/btrfs/locking.c:279
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (btrfs-root-00){++++}-{3:3}:
down_read_nested+0x64/0x84 kernel/locking/rwsem.c:1624
__btrfs_tree_read_lock fs/btrfs/locking.c:134 [inline]
btrfs_tree_read_lock fs/btrfs/locking.c:140 [inline]
btrfs_read_lock_root_node+0x13c/0x1c0 fs/btrfs/locking.c:279
btrfs_search_slot_get_root+0x74/0x338 fs/btrfs/ctree.c:1637
btrfs_search_slot+0x1b0/0xfd8 fs/btrfs/ctree.c:1944
btrfs_update_root+0x6c/0x5a0 fs/btrfs/root-tree.c:132
commit_fs_roots+0x1f0/0x33c fs/btrfs/transaction.c:1459
btrfs_commit_transaction+0x89c/0x12d8 fs/btrfs/transaction.c:2343
flush_space+0x66c/0x738 fs/btrfs/space-info.c:786
btrfs_async_reclaim_metadata_space+0x43c/0x4e0 fs/btrfs/space-info.c:1059
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
-> #2 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__mutex_lock_common+0xd4/0xca8 kernel/locking/mutex.c:603
__mutex_lock kernel/locking/mutex.c:747 [inline]
mutex_lock_nested+0x38/0x44 kernel/locking/mutex.c:799
btrfs_record_root_in_trans fs/btrfs/transaction.c:516 [inline]
start_transaction+0x248/0x944 fs/btrfs/transaction.c:752
btrfs_start_transaction+0x34/0x44 fs/btrfs/transaction.c:781
btrfs_create_common+0xf0/0x1b4 fs/btrfs/inode.c:6651
btrfs_create+0x8c/0xb0 fs/btrfs/inode.c:6697
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x804/0x11c4 fs/namei.c:3688
do_filp_open+0xdc/0x1b8 fs/namei.c:3718
do_sys_openat2+0xb8/0x22c fs/open.c:1313
do_sys_open fs/open.c:1329 [inline]
__do_sys_openat fs/open.c:1345 [inline]
__se_sys_openat fs/open.c:1340 [inline]
__arm64_sys_openat+0xb0/0xe0 fs/open.c:1340
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
-> #1 (sb_internal#2){.+.+}-{0:0}:
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1826 [inline]
sb_start_intwrite include/linux/fs.h:1948 [inline]
start_transaction+0x360/0x944 fs/btrfs/transaction.c:683
btrfs_join_transaction+0x30/0x40 fs/btrfs/transaction.c:795
btrfs_dirty_inode+0x50/0x140 fs/btrfs/inode.c:6103
btrfs_update_time+0x1c0/0x1e8 fs/btrfs/inode.c:6145
inode_update_time fs/inode.c:1872 [inline]
touch_atime+0x1f0/0x4a8 fs/inode.c:1945
file_accessed include/linux/fs.h:2516 [inline]
btrfs_file_mmap+0x50/0x88 fs/btrfs/file.c:2407
call_mmap include/linux/fs.h:2192 [inline]
mmap_region+0x7fc/0xc14 mm/mmap.c:1752
do_mmap+0x644/0x97c mm/mmap.c:1540
vm_mmap_pgoff+0xe8/0x1d0 mm/util.c:552
ksys_mmap_pgoff+0x1cc/0x278 mm/mmap.c:1586
__do_sys_mmap arch/arm64/kernel/sys.c:28 [inline]
__se_sys_mmap arch/arm64/kernel/sys.c:21 [inline]
__arm64_sys_mmap+0x58/0x6c arch/arm64/kernel/sys.c:21
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
-> #0 (&mm->mmap_lock){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3095 [inline]
check_prevs_add kernel/locking/lockdep.c:3214 [inline]
validate_chain kernel/locking/lockdep.c:3829 [inline]
__lock_acquire+0x1530/0x30a4 kernel/locking/lockdep.c:5053
lock_acquire+0x100/0x1f8 kernel/locking/lockdep.c:5666
__might_fault+0x7c/0xb4 mm/memory.c:5577
_copy_to_user include/linux/uaccess.h:134 [inline]
copy_to_user include/linux/uaccess.h:160 [inline]
btrfs_ioctl_get_subvol_rootref+0x3a8/0x4bc fs/btrfs/ioctl.c:3203
btrfs_ioctl+0xa08/0xa64 fs/btrfs/ioctl.c:5556
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0xd0/0x140 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
other info that might help us debug this:
Chain exists of:
&mm->mmap_lock --> &fs_info->reloc_mutex --> btrfs-root-00
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-root-00);
lock(&fs_info->reloc_mutex);
lock(btrfs-root-00);
lock(&mm->mmap_lock);
*** DEADLOCK ***
1 lock held by syz-executor307/3029:
#0: ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock fs/btrfs/locking.c:134 [inline]
#0: ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: btrfs_tree_read_lock fs/btrfs/locking.c:140 [inline]
#0: ffff0000c958a608 (btrfs-root-00){++++}-{3:3}, at: btrfs_read_lock_root_node+0x13c/0x1c0 fs/btrfs/locking.c:279
stack backtrace:
CPU: 0 PID: 3029 Comm: syz-executor307 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Call trace:
dump_backtrace+0x1c4/0x1f0 arch/arm64/kernel/stacktrace.c:156
show_stack+0x2c/0x54 arch/arm64/kernel/stacktrace.c:163
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x104/0x16c lib/dump_stack.c:106
dump_stack+0x1c/0x58 lib/dump_stack.c:113
print_circular_bug+0x2c4/0x2c8 kernel/locking/lockdep.c:2053
check_noncircular+0x14c/0x154 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3095 [inline]
check_prevs_add kernel/locking/lockdep.c:3214 [inline]
validate_chain kernel/locking/lockdep.c:3829 [inline]
__lock_acquire+0x1530/0x30a4 kernel/locking/lockdep.c:5053
lock_acquire+0x100/0x1f8 kernel/locking/lockdep.c:5666
__might_fault+0x7c/0xb4 mm/memory.c:5577
_copy_to_user include/linux/uaccess.h:134 [inline]
copy_to_user include/linux/uaccess.h:160 [inline]
btrfs_ioctl_get_subvol_rootref+0x3a8/0x4bc fs/btrfs/ioctl.c:3203
btrfs_ioctl+0xa08/0xa64 fs/btrfs/ioctl.c:5556
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0xd0/0x140 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
We do generally the right thing here, copying the references into a
temporary buffer, however we are still holding the path when we do
copy_to_user from the temporary buffer. Fix this by freeing the path
before we copy to user space.
Reported-by: syzbot+4ef9e52e464c6ff47d9d@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a nowait buffered write we can trigger the following assertion:
[11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658
[11138.438251] ------------[ cut here ]------------
[11138.438254] kernel BUG at fs/btrfs/messages.c:259!
[11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1
[11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
[11138.443583] Code: 5b 41 5a 41 (...)
[11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246
[11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000
[11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff
[11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001
[11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000
[11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000
[11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000
[11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0
[11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[11138.455779] Call Trace:
[11138.456211] <TASK>
[11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs]
[11138.457827] ? kmem_cache_alloc+0x18d/0x2a0
[11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs]
[11138.459407] csum_exist_in_range+0x56/0x110 [btrfs]
[11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs]
[11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs]
[11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs]
[11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs]
[11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs]
[11138.463982] ? lock_release+0x153/0x4a0
[11138.464347] io_write+0x11b/0x570
[11138.464660] ? lock_release+0x153/0x4a0
[11138.465213] ? lock_is_held_type+0xe8/0x140
[11138.466003] io_issue_sqe+0x63/0x4a0
[11138.466339] io_submit_sqes+0x238/0x770
[11138.466741] __do_sys_io_uring_enter+0x37b/0xb10
[11138.467206] ? lock_is_held_type+0xe8/0x140
[11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50
[11138.468688] do_syscall_64+0x38/0x90
[11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[11138.470017] RIP: 0033:0x7f1438c539e6
This is because to check if we can NOCOW, we check that if we can NOCOW
into an extent (it's prealloc extent or the inode has NOCOW attribute),
and then check if there are csums for the extent's range in the csum tree.
The search may leave us beyond the last slot of a leaf, and then when
we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a
time_seq of 0.
This triggers a failure of the first assertion at btrfs_next_old_leaf(),
since we have a nowait path. With assertions disabled, we simply don't
respect the NOWAIT semantics, allowing the write to block on locks or
blocking on IO for reading an extent buffer from disk.
Fix this by:
1) Triggering the assertion only if time_seq is not 0, which means that
search is being done by a tree mod log user, and in the buffered and
direct IO write paths we don't use the tree mod log;
2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to
lock an extent buffer should return immediately and not retry the
search, as well as if we need to do IO to read an extent buffer from
disk.
Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Don't transform the logical block size to a bit shift only to shift it
back to the original block size. Just use the size.
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This way it looks better.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Added new function wnd_set_used_safe.
Load $BadClus before $AttrDef instead of before $Bitmap.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
We need to check used bytes instead of total.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This way code will be more readable.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
We need to update ctime too with mode.
Fixes xfstest generic/307
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
