| Age | Commit message (Collapse) | Author |
|---|
|
write_super() -> sb_counters_from_cpu() may reallocate the superblock
Reported-by: syzbot+9fc4dac4775d07bcfe34@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
c->btree_roots_known[i].b can be NULL. In this case, a NULL pointer dereference
occurs, so you need to add code to check the variable.
Reported-by: syzbot+b468b9fef56949c3b528@syzkaller.appspotmail.com
Fixes: 7773df19c35f ("bcachefs: metadata version bucket_stripe_sectors")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This function creates pages in an inode and copies data into them,
update the function to use a folio instead of a page, and use the
appropriate folio helpers.
[SzM: use filemap_grab_folio()]
[Hau Tao: The third argument of folio_zero_range() should be the length to
be zeroed, not the total length. Fix it by using folio_zero_segment()
instead in fuse_notify_store()]
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We're just looking for pages in a mapping, use a folio and the folio
lookup function directly instead of using the page helper.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In order to make it easier to switch to folios in the fuse_args_pages
update the places where we update the vmstat counters for writeback to
use the folio related helpers. On the inc side this is easy as we
already have the folio, on the dec side we have to page_folio() the
pages for now.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
It wasn't there when the patch was posted for review, but somehow made it
into the pull.
Link: https://lore.kernel.org/all/20240913104703.1673180-1-mszeredi@redhat.com/
Fixes: efad7153bf93 ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_writepage_need_send is called by fuse_writepages_fill() which
already has a folio. Change fuse_writepage_need_send() to take a folio
instead, add a helper to check if the folio range is under writeback and
use this, as well as the appropriate folio helpers in the rest of the
function. Update fuse_writepage_need_send() to pass in the folio
directly.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Now that the buffered write path is using folios, convert
fuse_do_readpage() to take a folio instead of a page, update it to use
the appropriate folio helpers, and update the callers to pass in the
folio directly instead of a page.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This combines the file_remove_privs() and file_update_time() call into
one call.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Convert this to grab the folio from the fuse_args_pages and use the
appropriate folio related functions.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Currently we're using the __readahead_batch() helper which populates our
fuse_args_pages->pages array with pages. Convert this to use the newer
folio based pattern which is to call readahead_folio() to get the next
folio in the read ahead batch. I've updated the code to use things like
folio_size() and to take into account larger folio sizes, but this is
purely to make that eventual work easier to do, we currently will not
get large folios so this is more future proofing than actual support.
[SzM: remove check for readahead_folio() won't return NULL (at least for
now) so remove ugly assign in conditional.]
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_send_readpages() waits for writeback on each page. This can be
replaced by a single call to fuse_range_is_writeback().
[SzM: split this off from "fuse: convert readahead to use folios"]
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When invoking virtio_fs_enqueue_req() through kworker, both the
allocation of the sg array and the bounce buffer still use GFP_ATOMIC.
Considering the size of the sg array may be greater than PAGE_SIZE, use
GFP_NOFS instead of GFP_ATOMIC to lower the possibility of memory
allocation failure and to avoid unnecessarily depleting the atomic
reserves. GFP_NOFS is not passed to virtio_fs_enqueue_req() directly,
GFP_KERNEL and memalloc_nofs_{save|restore} helpers are used instead.
It may seem OK to pass GFP_NOFS to virtio_fs_enqueue_req() as well when
queuing the request for the first time, but this is not the case. The
reason is that fuse_request_queue_background() may call
->queue_request_and_unlock() while holding fc->bg_lock, which is a
spin-lock. Therefore, still use GFP_ATOMIC for it.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
Modules linked in:
CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:__alloc_pages+0x2bf/0x380
......
Call Trace:
<TASK>
? __warn+0x8e/0x150
? __alloc_pages+0x2bf/0x380
__kmalloc_large_node+0x86/0x160
__kmalloc+0x33c/0x480
virtio_fs_enqueue_req+0x240/0x6d0
virtio_fs_wake_pending_and_unlock+0x7f/0x190
queue_request_and_unlock+0x55/0x60
fuse_simple_request+0x152/0x2b0
fuse_direct_io+0x5d2/0x8c0
fuse_file_read_iter+0x121/0x160
__kernel_read+0x151/0x2d0
kernel_read+0x45/0x50
kernel_read_file+0x1a9/0x2a0
init_module_from_file+0x6a/0xe0
idempotent_init_module+0x175/0x230
__x64_sys_finit_module+0x5d/0xb0
x64_sys_call+0x1c3/0x9e0
do_syscall_64+0x3d/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
......
</TASK>
---[ end trace 0000000000000000 ]---
The warning is triggered as follows:
1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.
2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().
3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().
4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():
if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
return NULL;
5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.
A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.
So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.
After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.
It may seem necessary to introduce another field in fuse_conn to
indicate that these KVEC_IO pages are used for DMA, However, considering
that virtio-fs is currently the only user of use_pages_for_kvec_io, just
reuse use_pages_for_kvec_io to indicate that these pages will be used
for DMA.
Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit 23c94e1cdcbf ("fuse: Switch to using async direct IO
for FOPEN_DIRECT_IO") gave the async direct IO code path in the
fuse_direct_read_iter() and fuse_direct_write_iter(). But since
these two functions are only called under FOPEN_DIRECT_IO is set,
it seems that we can also use the async direct IO even the flag
IOCB_DIRECT is not set to enjoy the async direct IO method. Also
move the definition of fuse_io_priv to where it is used in fuse_
direct_write_iter.
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Introduce the capability to dynamically configure the max pages limit
(FUSE_MAX_MAX_PAGES) through a sysctl. This allows system administrators
to dynamically set the maximum number of pages that can be used for
servicing requests in fuse.
Previously, this is gated by FUSE_MAX_MAX_PAGES which is statically set
to 256 pages. One result of this is that the buffer size for a write
request is limited to 1 MiB on a 4k-page system.
The default value for this sysctl is the original limit (256 pages).
$ sysctl -a | grep max_pages_limit
fs.fuse.max_pages_limit = 256
$ sysctl -n fs.fuse.max_pages_limit
256
$ echo 1024 | sudo tee /proc/sys/fs/fuse/max_pages_limit
1024
$ sysctl -n fs.fuse.max_pages_limit
1024
$ echo 65536 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument
$ echo 0 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/max_pages_limit
65535
$ sysctl -n fs.fuse.max_pages_limit
65535
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The size of a.data_type is set abnormally large, causing shift-out-of-bounds.
To fix this, we need to add validation on a.data_type in
alloc_lru_idx_fragmentation().
Reported-by: syzbot+7f45fa9805c40db3f108@syzkaller.appspotmail.com
Fixes: 260af1562ec1 ("bcachefs: Kill alloc_v4.fragmentation_lru")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add check on layout->sb_max_size_bits against BCH_SB_LAYOUT_SIZE_BITS_MAX
to prevent UBSAN shift-out-of-bounds in validate_sb_layout().
Reported-by: syzbot+089fad5a3a5e77825426@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=089fad5a3a5e77825426
Fixes: 03ef80b469d5 ("bcachefs: Ignore unknown mount options")
Tested-by: syzbot+089fad5a3a5e77825426@syzkaller.appspotmail.com
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This reverts commit 724a08450f74b02bd89078a596fd24857827c012.
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e16 (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240408141436.GA17022@redhat.com/
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-4-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit 11763a8598f888dec631a8a903f7ada32181001f.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-3-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit 10211b4a23cf4a3df5c11a10e5b3d371f16a906f.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-2-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This reverts commit d05dcfdf5e1659b2949d13060284eff3888b644e.
This is a requirement to revert commit 724a08450f74 ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-1-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
|
|
Pull jfs fix from David Kleikamp:
"Fix a regression introduced in 6.12-rc1"
* tag 'jfs-6.12-rc5' of github.com:kleikamp/linux-shaggy:
jfs: Fix sanity check in dbMount
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
|
|
This reverts commit 1325e4a91a405f88f1b18626904d37860a4f9069.
using multipage folios apparently break some madvise operations like
MADV_PAGEOUT which do not reliably unload the specified page anymore,
Revert the patch until that is figured out.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 1325e4a91a40 ("9p: Enable multipage folios")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A common pattern when using pid fds is having to get information
about the process, which currently requires /proc being mounted,
resolving the fd to a pid, and then do manual string parsing of
/proc/N/status and friends. This needs to be reimplemented over
and over in all userspace projects (e.g.: I have reimplemented
resolving in systemd, dbus, dbus-daemon, polkit so far), and
requires additional care in checking that the fd is still valid
after having parsed the data, to avoid races.
Having a programmatic API that can be used directly removes all
these requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct
so that more parameters can be added later if needed. Start with
returning pid/tgid/ppid and creds unconditionally, and cgroupid
optionally.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Link: https://lore.kernel.org/r/20241010155401.2268522-1-luca.boccassi@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body.cold+0x19/0x26
? page_fault_oops+0x13e/0x2b0
? _printk+0x58/0x73
? do_user_addr_fault+0x5f/0x750
? exc_page_fault+0x76/0x240
? asm_exc_page_fault+0x22/0x30
? btrfs_bio_end_io+0xae/0xc0 [btrfs]
? btrfs_log_dev_io_error+0x7f/0x90 [btrfs]
btrfs_orig_write_end_io+0x51/0x90 [btrfs]
dm_submit_bio+0x5c2/0xa50 [dm_mod]
? find_held_lock+0x2b/0x80
? blk_try_enter_queue+0x90/0x1e0
__submit_bio+0xe0/0x130
? ktime_get+0x10a/0x160
? lockdep_hardirqs_on+0x74/0x100
submit_bio_noacct_nocheck+0x199/0x410
btrfs_submit_bio+0x7d/0x150 [btrfs]
btrfs_submit_chunk+0x1a1/0x6d0 [btrfs]
? lockdep_hardirqs_on+0x74/0x100
? __folio_start_writeback+0x10/0x2c0
btrfs_submit_bbio+0x1c/0x40 [btrfs]
submit_one_bio+0x44/0x60 [btrfs]
submit_extent_folio+0x13f/0x330 [btrfs]
? btrfs_set_range_writeback+0xa3/0xd0 [btrfs]
extent_writepage_io+0x18b/0x360 [btrfs]
extent_write_locked_range+0x17c/0x340 [btrfs]
? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
run_delalloc_cow+0x71/0xd0 [btrfs]
btrfs_run_delalloc_range+0x176/0x500 [btrfs]
? find_lock_delalloc_range+0x119/0x260 [btrfs]
writepage_delalloc+0x2ab/0x480 [btrfs]
extent_write_cache_pages+0x236/0x7d0 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xd4/0x240
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode+0x12c/0x290
? wbc_attach_and_unlock_inode+0x12c/0x290
__writeback_single_inode+0x5c/0x4c0
? do_raw_spin_unlock+0x49/0xb0
writeback_sb_inodes+0x22c/0x560
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x1d6/0x3f0
wb_workfn+0x334/0x520
process_one_work+0x1ee/0x570
? lock_is_held_type+0xc6/0x130
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xee/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: dm_mod btrfs blake2b_generic xor raid6_pq rapl
CR2: 0000000000000020
* Case 2. Earlier completion of orig_bbio for mirrored btrfs_bios
btrfs_bbio_propagate_error() assumes the end_io function for orig_bbio is
called last among split bios. In that case, btrfs_orig_write_end_io() sets
the bio->bi_status to BLK_STS_IOERR by seeing the bioc->error [2].
Otherwise, the increased orig_bio's bioc->error is not checked by anyone
and return BLK_STS_OK to the upper layer.
[2] Actually, this is not true. Because we only increases orig_bioc->errors
by max_errors, the condition "atomic_read(&bioc->error) > bioc->max_errors"
is still not met if only one split btrfs_bio fails.
* Case 3. Later completion of orig_bbio for un-mirrored btrfs_bios
In contrast to the above case, btrfs_bbio_propagate_error() is not working
well if un-mirrored orig_bbio is completed last. It sets
orig_bbio->bio.bi_status to the btrfs_bio's error. But, that is easily
over-written by orig_bbio's completion status. If the status is BLK_STS_OK,
the upper layer would not know the failure.
* Solution
Considering the above cases, we can only save the error status in the
orig_bbio (remaining part after split) itself as it is always
available. Also, the saved error status should be propagated when all the
split btrfs_bios are finished (i.e, bbio->pending_ios == 0).
This commit introduces "status" to btrfs_bbio and saves the first error of
split bios to original btrfs_bio's "status" variable. When all the split
bios are finished, the saved status is loaded into original btrfs_bio's
status.
With this commit, btrfs/146 on zoned devices does not hit the NULL pointer
dereference anymore.
Fixes: 852eee62d31a ("btrfs: allow btrfs_submit_bio to split bios")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As struct file_operations is really big, but (most) debugfs
files only use simple_open, read, write and perhaps seek, and
don't need anything else, this wastes a lot of space for NULL
pointers.
Add a struct debugfs_short_fops and some bookkeeping code in
debugfs so that users can use that with debugfs_create_file()
using _Generic to figure out which function to use.
Converting mac80211 to use it where possible saves quite a
bit of space:
1010127 205064 1220 1216411 128f9b net/mac80211/mac80211.ko (before)
981199 205064 1220 1187483 121e9b net/mac80211/mac80211.ko (after)
-------
-28928 = ~28KiB
With a marginal space cost in debugfs:
8701 550 16 9267 2433 fs/debugfs/inode.o (before)
25233 325 32 25590 63f6 fs/debugfs/file.o (before)
8914 558 16 9488 2510 fs/debugfs/inode.o (after)
25380 325 32 25737 6489 fs/debugfs/file.o (after)
---------------
+360 +8
(All on x86-64)
A simple spatch suggests there are more than 300 instances,
not even counting the ones hidden in macros like in mac80211,
that could be trivially converted, for additional savings of
about 240 bytes for each.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241022151838.26f9925fb959.Ia80b55e934bbfc45ce0df42a3233d34b35508046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a69730 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf456 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "hostfs=/foo", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-7-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
MAXAG is a legitimate value for bmp->db_numag
Fixes: e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Merge in block/fs prep patches for the atomic write support.
* for-6.13/block-atomic:
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
|
|
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fccbb ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration.
Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/
Fixes: f044b318675f ("btrfs: handle the ro->rw transition for mounting different subvolumes")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.
commit ac05ca913e9f ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.
However, since,
commit 3d2ac9922465 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.
We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.
The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.
Fixes: 3d2ac9922465 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside lock_delalloc_folios(), there are several problems related to
sector size < page size handling:
- Set the writer locks without checking if the folio is still valid
We call btrfs_folio_start_writer_lock() just like it's folio_lock().
But since the folio may not even be the folio of the current mapping,
we can easily screw up the folio->private.
- The range is not clamped inside the page
This means we can over write other bitmaps if the start/len is not
properly handled, and trigger the btrfs_subpage_assert().
- @processed_end is always rounded up to page end
If the delalloc range is not page aligned, and we need to retry
(returning -EAGAIN), then we will unlock to the page end.
Thankfully this is not a huge problem, as now
btrfs_folio_end_writer_lock() can handle range larger than the locked
range, and only unlock what is already locked.
Fix all these problems by:
- Lock and check the folio first, then call
btrfs_folio_set_writer_lock()
So that if we got a folio not belonging to the inode, we won't
touch folio->private.
- Properly truncate the range inside the page
- Update @processed_end to the locked range end
Fixes: 1e1de38792e0 ("btrfs: make process_one_page() to handle subpage locking")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit 011b46c30476 ("btrfs: skip subtree scan if it's too high to
avoid low stall in btrfs_commit_transaction()"), btrfs qgroup can
automatically skip large subtree scan at the cost of marking qgroup
inconsistent.
It's designed to address the final performance problem of snapshot drop
with qgroup enabled, but to be safe the default value is
BTRFS_MAX_LEVEL, requiring a user space daemon to set a different value
to make it work.
I'd say it's not a good idea to rely on user space tool to set this
default value, especially when some operations (snapshot dropping) can
be triggered immediately after mount, leaving a very small window to
that that sysfs interface.
So instead of disabling this new feature by default, enable it with a
low threshold (3), so that large subvolume tree drop at mount time won't
cause huge qgroup workload.
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After the migration to use fs context for processing mount options we had
a slight change in the semantics for remounting a filesystem that was
mounted with compress-force. Before we could clear compress-force by
passing only "-o compress[=algo]" during a remount, but after that change
that does not work anymore, force-compress is still present and one needs
to pass "-o compress-force=no,compress[=algo]" to the mount command.
Example, when running on a kernel 6.8+:
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
On a 6.7 kernel (or older):
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
So update btrfs_parse_param() to clear "compress-force" when "compress" is
given, providing the same semantics as kernel 6.7 and older.
Reported-by: Roman Mamedov <rm@romanrm.net>
Link: https://lore.kernel.org/linux-btrfs/20241014182416.13d0f8b0@nvm/
CC: stable@vger.kernel.org # 6.8+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When mounting of a corrupted disk image fails, the error message printed
can reference uninitialized inode fields. To prevent that from happening,
always initialize those fields.
Reported-by: syzbot+aa0730b0a42646eb1359@syzkaller.appspotmail.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently log recovery never updates the in-core perag values for the
last allocation group when they were grown by growfs. This leads to
btree record validation failures for the alloc, ialloc or finotbt
trees if a transaction references this new space.
Found by Brian's new growfs recovery stress test.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
__GFP_RETRY_MAYFAIL increases the likelyhood of allocations to fail,
which isn't really helpful during log recovery. Remove the flag and
stick to the default GFP_KERNEL policies.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
XFS currently does not support reducing the agcount, so error out if
a logged sb buffer tries to shrink the agcount.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Primary superblock buffers that change the file system geometry after a
growfs operation can affect the operation of later CIL checkpoints that
make use of the newly added space and allocation groups.
Apply the changes to the in-memory structures as part of recovery pass 2,
to ensure recovery works fine for such cases.
In the future we should apply the logic to other updates such as features
bits as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There is no good reason to have two different routines for freeing perag
structures for the unmount and error cases. Add two arguments to specify
the range of AGs to free to xfs_free_perag, and use that to replace
xfs_free_unused_perag_range.
The addition RCU grace period for the error case is harmless, and the
extra check for the AG to actually exist is not required now that the
callers pass the exact known allocated range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently only the new agcount is passed to xfs_initialize_perag, which
requires lookups of existing AGs to skip them and complicates error
handling. Also pass the previous agcount so that the range that
xfs_initialize_perag operates on is exactly defined. That way the
extra lookups can be avoided, and error handling can clean up the
exact range from the old count to the last added perag structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
