| Age | Commit message (Collapse) | Author |
|---|
|
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
In the very rare case where the readdir reply contains multiple cookies
that map to the same hash value, we can end up deadlocking waiting for a
page lock that we already hold. In this case we should fail the page
lock by using grab_cache_page_nowait().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When I/O fails in one of the currently connected DFS targets, retry it
from other targets as specified in MS-DFSC "3.1.5.2 I/O Operation to
+Target Fails with an Error Other Than STATUS_PATH_NOT_COVERED."
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Don't use semaphores in always-atomic-context code (Jann Horn)
- Add "ECC:" prefix to ECC messages (Vincent Whitchurch)
* tag 'pstore-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Don't use semaphores in always-atomic-context code
pstore: Add prefix to ECC messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
|
|
When the ring is exiting, as part of the shutdown, poll requests are
removed. But io_poll_remove_all() does not remove entries when finding
them, and since completions are done out-of-band, we can find and remove
the same entry multiple times.
We do guard the poll execution by poll ownership, but that does not
exclude us from reissuing a new one once the previous removal ownership
goes away.
This can race with poll execution as well, where we then end up seeing
req->apoll be NULL because a previous task_work requeue finished the
request.
Remove the poll entry when we find it and get ownership of it. This
prevents multiple invocations from finding it.
Fixes: aa43477b0402 ("io_uring: poll rework")
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.dk/linux-block
Pull bio_alloc() cleanups from Jens Axboe:
"Filesystem cleanups to pass the bio op to bio_alloc() instead of
setting it just before bio submission".
* tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block:
f2fs: pass the bio operation to bio_alloc_bioset
f2fs: don't pass a bio to f2fs_target_device
nilfs2: pass the operation to bio_alloc
ext4: pass the operation to bio_alloc
mpage: pass the operation to bio_alloc
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
git://git.kernel.dk/linux-block
Pull io_uring statx fixes from Jens Axboe:
"On top of the main io_uring branch, this is to ensure that the
filename component of statx is stable after submit.
That requires a few VFS related changes"
* tag 'for-5.18/io_uring-statx-2022-03-18' of git://git.kernel.dk/linux-block:
io-uring: Make statx API stable
|
|
Pull io_uring updates from Jens Axboe:
- Fixes for current file position. Still doesn't have the f_pos_lock
sorted, but it's a step in the right direction (Dylan)
- Tracing updates (Dylan, Stefan)
- Improvements to io-wq locking (Hao)
- Improvements for provided buffers (me, Pavel)
- Support for registered file descriptors (me, Xiaoguang)
- Support for ring messages (me)
- Poll improvements (me)
- Fix for fixed buffers and non-iterator reads/writes (me)
- Support for NAPI on sockets (Olivier)
- Ring quiesce improvements (Usama)
- Misc fixes (Olivier, Pavel)
* tag 'for-5.18/io_uring-2022-03-18' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: terminate manual loop iterator loop correctly for non-vecs
io_uring: don't check unrelated req->open.how in accept request
io_uring: manage provided buffers strictly ordered
io_uring: fold evfd signalling under a slower path
io_uring: thin down io_commit_cqring()
io_uring: shuffle io_eventfd_signal() bits around
io_uring: remove extra barrier for non-sqpoll iopoll
io_uring: fix provided buffer return on failure for kiocb_done()
io_uring: extend provided buf return to fails
io_uring: refactor timeout cancellation cqe posting
io_uring: normilise naming for fill_cqe*
io_uring: cache poll/double-poll state with a request flag
io_uring: cache req->apoll->events in req->cflags
io_uring: move req->poll_refs into previous struct hole
io_uring: make tracing format consistent
io_uring: recycle apoll_poll entries
io_uring: remove duplicated member check for io_msg_ring_prep()
io_uring: allow submissions to continue on error
io_uring: recycle provided buffers if request goes async
io_uring: ensure reads re-import for selected buffers
...
|
|
Currently, we use this undocumented macro to encode the minimum number
of blocks needed to replenish a completely empty AGFL when an AG is
nearly full. This has lead to confusion on the part of the maintainers,
so let's document what the value actually means, and move it to
xfs_alloc.c since it's not used outside of that module.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
|
|
These functions are page cache functionality and don't need to be
declared in fs.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
Add kernel-doc and return the number of pages removed in order to
get the statistics right in __invalidate_mapping_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
This saves a lot of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Changed a way of showing values of them to use strings.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Introduce a new mount option -- trunkdiscovery,notrunkdiscovery -- to
toggle whether or not the client will engage in actively discovery
of trunking locations.
v2 make notrunkdiscovery default
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 1976b2b31462 ("NFSv4.1 query for fs_location attr on a new file system")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
If read_mapping_folio() fails then "inline_version" is printed without
being initialized.
[ jlayton: use CEPH_INLINE_NONE instead of "-1" ]
Fixes: 083db6fd3e73 ("ceph: uninline the data on a file opened for writing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
stdev is computed in `cephfs-top` tool - clients forward
square of sums and IO count required to calculate stdev.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Make the math a bit simpler to understand (should not
affect execution speeds).
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Latencies are of type ktime_t, coverting from jiffies is incorrect.
Also, switch to "struct ceph_timespec" for r/w/m latencies.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The ceph_find_inode() may will fail and return NULL.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The ceph_get_inode() will search for or insert a new inode into the
hash for the given vino, and return a reference to it. If new is
non-NULL, its reference is consumed.
We should release the reference when in error handing cases.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Without a full memory barrier between the store to the flags and the
load of the SQ tail the two operations can be reordered and this can
lead to a situation where the SQPOLL thread goes to sleep while the
application writes to the SQ tail and doesn't see the wakeup flag.
This memory barrier pairs with a full memory barrier in the application
between its store to the SQ tail and its load of the flags.
Signed-off-by: Almog Khaikin <almogkh@gmail.com>
Link: https://lore.kernel.org/r/20220321090059.46313-1-almogkh@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that we call fsnotify_modify() if we write a file, and that we
do fsnotify_access() if we read it. This enables anyone using inotify
on the file to get notified.
Ditto for fallocate, ensure that fsnotify_modify() is called.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the destination.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use netif_is_bridge_port defined in <linux/netdevice.h> instead of
open-coding it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I've been chasing a recent resurgence in generic/388 recovery
failure and/or corruption events. The events have largely been
uninitialised inode chunks being tripped over in log recovery
such as:
XFS (pmem1): User initiated shutdown received.
pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/xfs/xfs_fsops.c:500). Shutting down filesystem.
XFS (pmem1): Please unmount the filesystem and rectify the problem(s)
XFS (pmem1): Unmounting Filesystem
XFS (pmem1): Mounting V5 Filesystem
XFS (pmem1): Starting recovery (logdev: internal)
XFS (pmem1): bad inode magic/vsn daddr 8723584 #0 (magic=1818)
XFS (pmem1): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x851c80 xfs_inode_buf_verify
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): First 128 bytes of corrupted metadata buffer:
00000000: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000010: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000020: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000030: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000040: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000050: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000060: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000070: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
XFS (pmem1): metadata I/O error in "xlog_recover_items_pass2+0x52/0xc0" at daddr 0x851c80 len 32 error 117
XFS (pmem1): log mount/recovery failed: error -117
XFS (pmem1): log mount failed
There have been isolated random other issues, too - xfs_repair fails
because it finds some corruption in symlink blocks, rmap
inconsistencies, etc - but they are nowhere near as common as the
uninitialised inode chunk failure.
The problem has clearly happened at runtime before recovery has run;
I can see the ICREATE log item in the log shortly before the
actively recovered range of the log. This means the ICREATE was
definitely created and written to the log, but for some reason the
tail of the log has been moved past the ordered buffer log item that
tracks INODE_ALLOC buffers and, supposedly, prevents the tail of the
log moving past the ICREATE log item before the inode chunk buffer
is written to disk.
Tracing the fsstress processes that are running when the filesystem
shut down immediately pin-pointed the problem:
user shutdown marks xfs_mount as shutdown
godown-213341 [008] 6398.022871: console: [ 6397.915392] XFS (pmem1): User initiated shutdown received.
.....
aild tries to push ordered inode cluster buffer
xfsaild/pmem1-213314 [001] 6398.022974: xfs_buf_trylock: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 16 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_inode_item_push+0x8e
xfsaild/pmem1-213314 [001] 6398.022976: xfs_ilock_nowait: dev 259:1 ino 0x851c80 flags ILOCK_SHARED caller xfs_iflush_cluster+0xae
xfs_iflush_cluster() checks xfs_is_shutdown(), returns true,
calls xfs_iflush_abort() to kill writeback of the inode.
Inode is removed from AIL, drops cluster buffer reference.
xfsaild/pmem1-213314 [001] 6398.022977: xfs_ail_delete: dev 259:1 lip 0xffff88880247ed80 old lsn 7/20344 new lsn 7/21000 type XFS_LI_INODE flags IN_AIL
xfsaild/pmem1-213314 [001] 6398.022978: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 17 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_iflush_abort+0xd7
.....
All inodes on cluster buffer are aborted, then the cluster buffer
itself is aborted and removed from the AIL *without writeback*:
xfsaild/pmem1-213314 [001] 6398.023011: xfs_buf_error_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_ioend_fail+0x33
xfsaild/pmem1-213314 [001] 6398.023012: xfs_ail_delete: dev 259:1 lip 0xffff8888053efde8 old lsn 7/20344 new lsn 7/20344 type XFS_LI_BUF flags IN_AIL
The inode buffer was at 7/20344 when it was removed from the AIL.
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_item_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_done+0x31
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_relse+0x39
.....
Userspace is still running, doing stuff. an fsstress process runs
syncfs() or sync() and we end up in sync_fs_one_sb() which issues
a log force. This pushes on the CIL:
fsstress-213322 [001] 6398.024430: xfs_fs_sync_fs: dev 259:1 m_features 0x20000000019ff6e9 opstate (clean|shutdown|inodegc|blockgc) s_flags 0x70810000 caller sync_fs_one_sb+0x26
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x0 caller xfs_fs_sync_fs+0x82
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x5f caller xfs_log_force+0x7c
<...>-194402 [001] 6398.024467: kmem_alloc: size 176 flags 0x14 caller xlog_cil_push_work+0x9f
And the CIL fills up iclogs with pending changes. This picks up
the current tail from the AIL:
<...>-194402 [001] 6398.024497: xlog_iclog_get_space: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x0 flags caller xlog_write+0x149
<...>-194402 [001] 6398.024498: xlog_iclog_switch: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x700005408 flags caller xlog_state_get_iclog_space+0x37e
<...>-194402 [001] 6398.024521: xlog_iclog_release: dev 259:1 state XLOG_STATE_WANT_SYNC refcnt 1 offset 32256 lsn 0x700005408 flags caller xlog_write+0x5f9
<...>-194402 [001] 6398.024522: xfs_log_assign_tail_lsn: dev 259:1 new tail lsn 7/21000, old lsn 7/20344, last sync 7/21448
And it moves the tail of the log to 7/21000 from 7/20344. This
*moves the tail of the log beyond the ICREATE transaction* that was
at 7/20344 and pinned by the inode cluster buffer that was cancelled
above.
....
godown-213341 [008] 6398.027005: xfs_force_shutdown: dev 259:1 tag logerror flags log_io|force_umount file fs/xfs/xfs_fsops.c line_num 500
godown-213341 [008] 6398.027022: console: [ 6397.915406] pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
godown-213341 [008] 6398.030551: console: [ 6397.919546] XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/
And finally the log itself is now shutdown, stopping all further
writes to the log. But this is too late to prevent the corruption
that moving the tail of the log forwards after we start cancelling
writeback causes.
The fundamental problem here is that we are using the wrong shutdown
checks for log items. We've long conflated mount shutdown with log
shutdown state, and I started separating that recently with the
atomic shutdown state changes in commit b36d4651e165 ("xfs: make
forced shutdown processing atomic"). The changes in that commit
series are directly responsible for being able to diagnose this
issue because it clearly separated mount shutdown from log shutdown.
Essentially, once we start cancelling writeback of log items and
removing them from the AIL because the filesystem is shut down, we
*cannot* update the journal because we may have cancelled the items
that pin the tail of the log. That moves the tail of the log
forwards without having written the metadata back, hence we have
corrupt in memory state and writing to the journal propagates that
to the on-disk state.
What commit b36d4651e165 makes clear is that log item state needs to
change relative to log shutdown, not mount shutdown. IOWs, anything
that aborts metadata writeback needs to check log shutdown state
because log items directly affect log consistency. Having them check
mount shutdown state introduces the above race condition where we
cancel metadata writeback before the log shuts down.
To fix this, this patch works through all log items and converts
shutdown checks to use xlog_is_shutdown() rather than
xfs_is_shutdown(), so that we don't start aborting metadata
writeback before we shut off journal writes.
AFAICT, this race condition is a zero day IO error handling bug in
XFS that dates back to the introduction of XLOG_IO_ERROR,
XLOG_STATE_IOERROR and XFS_FORCED_SHUTDOWN back in January 1997.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The AIL operates purely on log items, so it is a log centric
subsystem. Divorce it from the xfs_mount and instead have it pass
around xlog pointers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Log items belong to the log, not the xfs_mount. Convert the mount
pointer in the log item to a xlog pointer in preparation for
upcoming log centric changes to the log items.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When the AIL tries to flush the CIL, it relies on the CIL push
ending up on stable storage without having to wait for and
manipulate iclog state directly. However, if there is already a
pending CIL push when the AIL tries to flush the CIL, it won't set
the cil->xc_push_commit_stable flag and so the CIL push will not
actively flush the commit record iclog.
generic/530 when run on a single CPU test VM can trigger this fairly
reliably. This test exercises unlinked inode recovery, and can
result in inodes being pinned in memory by ongoing modifications to
the inode cluster buffer to record unlinked list modifications. As a
result, the first inode unlinked in a buffer can pin the tail of the
log whilst the inode cluster buffer is pinned by the current
checkpoint that has been pushed but isn't on stable storage because
because the cil->xc_push_commit_stable was not set. This results in
the log/AIL effectively deadlocking until something triggers the
commit record iclog to be pushed to stable storage (i.e. the
periodic log worker calling xfs_log_force()).
The fix is two-fold - first we should always set the
cil->xc_push_commit_stable when xlog_cil_flush() is called,
regardless of whether there is already a pending push or not.
Second, if the CIL is empty, we should trigger an iclog flush to
ensure that the iclogs of the last checkpoint have actually been
submitted to disk as that checkpoint may not have been run under
stable completion constraints.
Reported-and-tested-by: Matthew Wilcox <willy@infradead.org>
Fixes: 0020a190cf3e ("xfs: AIL needs asynchronous CIL forcing")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_ail_push_all_sync() has a loop like this:
while max_ail_lsn {
prepare_to_wait(ail_empty)
target = max_ail_lsn
wake_up(ail_task);
schedule()
}
Which is designed to sleep until the AIL is emptied. When
xfs_ail_update_finish() moves the tail of the log, it does:
if (list_empty(&ailp->ail_head))
wake_up_all(&ailp->ail_empty);
So it will only wake up the sync push waiter when the AIL goes
empty. If, by the time the push waiter has woken, the AIL has more
in it, it will reset the target, wake the push task and go back to
sleep.
The problem here is that if the AIL is having items added to it
when xfs_ail_push_all_sync() is called, then they may get inserted
into the AIL at a LSN higher than the target LSN. At this point,
xfsaild_push() will see that the target is X, the item LSNs are
(X+N) and skip over them, hence never pushing the out.
The result of this the AIL will not get emptied by the AIL push
thread, hence xfs_ail_finish_update() will never see the AIL being
empty even if it moves the tail. Hence xfs_ail_push_all_sync() never
gets woken and hence cannot update the push target to capture the
items beyond the current target on the LSN.
This is a TOCTOU type of issue so the way to avoid it is to not
use the push target at all for sync pushes. We know that a sync push
is being requested by the fact the ail_empty wait queue is active,
hence the xfsaild can just set the target to max_ail_lsn on every
push that we see the wait queue active. Hence we no longer will
leave items on the AIL that are beyond the LSN sampled at the start
of a sync push.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
AIL flushing can get stuck here:
[316649.005769] INFO: task xfsaild/pmem1:324525 blocked for more than 123 seconds.
[316649.007807] Not tainted 5.17.0-rc6-dgc+ #975
[316649.009186] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[316649.011720] task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000
[316649.014112] Call Trace:
[316649.014841] <TASK>
[316649.015492] __schedule+0x30d/0x9e0
[316649.017745] schedule+0x55/0xd0
[316649.018681] io_schedule+0x4b/0x80
[316649.019683] xfs_buf_wait_unpin+0x9e/0xf0
[316649.021850] __xfs_buf_submit+0x14a/0x230
[316649.023033] xfs_buf_delwri_submit_buffers+0x107/0x280
[316649.024511] xfs_buf_delwri_submit_nowait+0x10/0x20
[316649.025931] xfsaild+0x27e/0x9d0
[316649.028283] kthread+0xf6/0x120
[316649.030602] ret_from_fork+0x1f/0x30
in the situation where flushing gets preempted between the unpin
check and the buffer trylock under nowait conditions:
blk_start_plug(&plug);
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
if (!wait_list) {
if (xfs_buf_ispinned(bp)) {
pinned++;
continue;
}
Here >>>>>>
if (!xfs_buf_trylock(bp))
continue;
This means submission is stuck until something else triggers a log
force to unpin the buffer.
To get onto the delwri list to begin with, the buffer pin state has
already been checked, and hence it's relatively rare we get a race
between flushing and encountering a pinned buffer in delwri
submission to begin with. Further, to increase the pin count the
buffer has to be locked, so the only way we can hit this race
without failing the trylock is to be preempted between the pincount
check seeing zero and the trylock being run.
Hence to avoid this problem, just invert the order of trylock vs
pin check. We shouldn't hit that many pinned buffers here, so
optimising away the trylock for pinned buffers should not matter for
performance at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
After 963 iterations of generic/530, it deadlocked during recovery
on a pinned inode cluster buffer like so:
XFS (pmem1): Starting recovery (logdev: internal)
INFO: task kworker/8:0:306037 blocked for more than 122 seconds.
Not tainted 5.17.0-rc6-dgc+ #975
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/8:0 state:D stack:13024 pid:306037 ppid: 2 flags:0x00004000
Workqueue: xfs-inodegc/pmem1 xfs_inodegc_worker
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
schedule_timeout+0x114/0x160
__down+0x99/0xf0
down+0x5e/0x70
xfs_buf_lock+0x36/0xf0
xfs_buf_find+0x418/0x850
xfs_buf_get_map+0x47/0x380
xfs_buf_read_map+0x54/0x240
xfs_trans_read_buf_map+0x1bd/0x490
xfs_imap_to_bp+0x4f/0x70
xfs_iunlink_map_ino+0x66/0xd0
xfs_iunlink_map_prev.constprop.0+0x148/0x2f0
xfs_iunlink_remove_inode+0xf2/0x1d0
xfs_inactive_ifree+0x1a3/0x900
xfs_inode_unlink+0xcc/0x210
xfs_inodegc_worker+0x1ac/0x2f0
process_one_work+0x1ac/0x390
worker_thread+0x56/0x3c0
kthread+0xf6/0x120
ret_from_fork+0x1f/0x30
</TASK>
task:mount state:D stack:13248 pid:324509 ppid:324233 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
schedule_timeout+0x114/0x160
__down+0x99/0xf0
down+0x5e/0x70
xfs_buf_lock+0x36/0xf0
xfs_buf_find+0x418/0x850
xfs_buf_get_map+0x47/0x380
xfs_buf_read_map+0x54/0x240
xfs_trans_read_buf_map+0x1bd/0x490
xfs_imap_to_bp+0x4f/0x70
xfs_iget+0x300/0xb40
xlog_recover_process_one_iunlink+0x4c/0x170
xlog_recover_process_iunlinks.isra.0+0xee/0x130
xlog_recover_finish+0x57/0x110
xfs_log_mount_finish+0xfc/0x1e0
xfs_mountfs+0x540/0x910
xfs_fs_fill_super+0x495/0x850
get_tree_bdev+0x171/0x270
xfs_fs_get_tree+0x15/0x20
vfs_get_tree+0x24/0xc0
path_mount+0x304/0xba0
__x64_sys_mount+0x108/0x140
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
io_schedule+0x4b/0x80
xfs_buf_wait_unpin+0x9e/0xf0
__xfs_buf_submit+0x14a/0x230
xfs_buf_delwri_submit_buffers+0x107/0x280
xfs_buf_delwri_submit_nowait+0x10/0x20
xfsaild+0x27e/0x9d0
kthread+0xf6/0x120
ret_from_fork+0x1f/0x30
We have the mount process waiting on an inode cluster buffer read,
inodegc doing unlink waiting on the same inode cluster buffer, and
the AIL push thread blocked in writeback waiting for the inode
cluster buffer to become unpinned.
What has happened here is that the AIL push thread has raced with
the inodegc process modifying, committing and pinning the inode
cluster buffer here in xfs_buf_delwri_submit_buffers() here:
blk_start_plug(&plug);
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
if (!wait_list) {
if (xfs_buf_ispinned(bp)) {
pinned++;
continue;
}
Here >>>>>>
if (!xfs_buf_trylock(bp))
continue;
Basically, the AIL has found the buffer wasn't pinned and got the
lock without blocking, but then the buffer was pinned. This implies
the processing here was pre-empted between the pin check and the
lock, because the pin count can only be increased while holding the
buffer locked. Hence when it has gone to submit the IO, it has
blocked waiting for the buffer to be unpinned.
With all executing threads now waiting on the buffer to be unpinned,
we normally get out of situations like this via the background log
worker issuing a log force which will unpinned stuck buffers like
this. But at this point in recovery, we haven't started the log
worker. In fact, the first thing we do after processing intents and
unlinked inodes is *start the log worker*. IOWs, we start it too
late to have it break deadlocks like this.
Avoid this and any other similar deadlock vectors in intent and
unlinked inode recovery by starting the log worker before we recover
intents and unlinked inodes. This part of recovery runs as though
the filesystem is fully active, so we really should have the same
infrastructure running as we normally do at runtime.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
We currently have a race where we recycle the selected buffer if poll
returns IO_APOLL_OK. But that's too late, as the poll could already be
triggering or have triggered. If that race happens, then we're putting a
buffer that's already being used.
Fix this by recycling before we arm poll. This does mean that we'll
sometimes almost instantly re-select the buffer, but it's rare enough in
testing that it should not pose a performance issue.
Fixes: b1c62645758e ("io_uring: recycle provided buffers if request goes async")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The cifs_demultiplexer_thread should only call cifs_reconnect.
If any other thread wants to trigger a reconnect, they can do
so by updating the server tcpStatus to CifsNeedReconnect.
The last patch attempted to use the same helper function for
both types of threads, but that causes other issues
with lock dependencies.
This patch creates a new helper for non-cifsd threads, that
will indicate to cifsd that the server needs reconnect.
Fixes: 2a05137a0575 ("cifs: mark sessions for reconnection in helper function")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove the spinlock around the tree traversal as we are calling possibly
sleeping functions.
We do not need a spinlock here as there will be no modifications to this
tree at this point.
This prevents warnings like this to occur in dmesg:
[ 653.774996] BUG: sleeping function called from invalid context at kernel/loc\
king/mutex.c:280
[ 653.775088] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1827, nam\
e: umount
[ 653.775152] preempt_count: 1, expected: 0
[ 653.775191] CPU: 0 PID: 1827 Comm: umount Tainted: G W OE 5.17.0\
-rc7-00006-g4eb628dd74df #135
[ 653.775195] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-\
1.fc33 04/01/2014
[ 653.775197] Call Trace:
[ 653.775199] <TASK>
[ 653.775202] dump_stack_lvl+0x34/0x44
[ 653.775209] __might_resched.cold+0x13f/0x172
[ 653.775213] mutex_lock+0x75/0xf0
[ 653.775217] ? __mutex_lock_slowpath+0x10/0x10
[ 653.775220] ? _raw_write_lock_irq+0xd0/0xd0
[ 653.775224] ? dput+0x6b/0x360
[ 653.775228] cifs_kill_sb+0xff/0x1d0 [cifs]
[ 653.775285] deactivate_locked_super+0x85/0x130
[ 653.775289] cleanup_mnt+0x32c/0x4d0
[ 653.775292] ? path_umount+0x228/0x380
[ 653.775296] task_work_run+0xd8/0x180
[ 653.775301] exit_to_user_mode_loop+0x152/0x160
[ 653.775306] exit_to_user_mode_prepare+0x89/0xd0
[ 653.775315] syscall_exit_to_user_mode+0x12/0x30
[ 653.775322] do_syscall_64+0x48/0x90
[ 653.775326] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 187af6e98b44e5d8f25e1d41a92db138eb54416f ("cifs: fix handlecache and multiuser")
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When session gets reconnected during mount then read size in super block fs context
gets set to zero and after negotiate, rsize is not modified which results in
incorrect read with requested bytes as zero. Fixes intermittent failure
of xfstest generic/240
Note that stable requires a different version of this patch which will be
sent to the stable mailing list.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
RHBZ:1997367
When we collapse a range in smb3_collapse_range() we must make sure
we update the inode size and pagecache accordingly.
If not, both inode size and pagecahce may be stale until it is refreshed.
This can be demonstrated for the inode size by running :
xfs_io -i -f -c "truncate 320k" -c "fcollapse 64k 128k" -c "fiemap -v" \
/mnt/testfile
where we can see the result of stale data in the fiemap output.
The third line of the output is wrong, all this data should be truncated.
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: hole 128
1: [128..383]: 128..383 256 0x1
2: [384..639]: hole 256
And the correct output, when the inode size has been updated correctly should
look like this:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: hole 128
1: [128..383]: 128..383 256 0x1
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In multiuser each individual user has their own tcon structure for the
share and thus their own handle for a cached directory.
When we umount such a share we much make sure to release the pinned down dentry
for each such tcon and not just the master tcon.
Otherwise we will get nasty warnings on umount that dentries are still in use:
[ 3459.590047] BUG: Dentry 00000000115c6f41{i=12000000019d95,n=/} still in use\
(2) [unmount of cifs cifs]
...
[ 3459.590492] Call Trace:
[ 3459.590500] d_walk+0x61/0x2a0
[ 3459.590518] ? shrink_lock_dentry.part.0+0xe0/0xe0
[ 3459.590526] shrink_dcache_for_umount+0x49/0x110
[ 3459.590535] generic_shutdown_super+0x1a/0x110
[ 3459.590542] kill_anon_super+0x14/0x30
[ 3459.590549] cifs_kill_sb+0xf5/0x104 [cifs]
[ 3459.590773] deactivate_locked_super+0x36/0xa0
[ 3459.590782] cleanup_mnt+0x131/0x190
[ 3459.590789] task_work_run+0x5c/0x90
[ 3459.590798] exit_to_user_mode_loop+0x151/0x160
[ 3459.590809] exit_to_user_mode_prepare+0x83/0xd0
[ 3459.590818] syscall_exit_to_user_mode+0x12/0x30
[ 3459.590828] do_syscall_64+0x48/0x90
[ 3459.590833] entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
|
|
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7ec0 ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In fill_thread_core_info() the ptrace accessible registers are collected
to be written out as notes in a core file. The note array is allocated
from a size calculated by iterating the user regset view, and counting the
regsets that have a non-zero core_note_type. However, this only allows for
there to be non-zero core_note_type at the end of the regset view. If
there are any gaps in the middle, fill_thread_core_info() will overflow the
note allocation, as it iterates over the size of the view and the
allocation would be smaller than that.
There doesn't appear to be any arch that has gaps such that they exceed
the notes allocation, but the code is brittle and tries to support
something it doesn't. It could be fixed by increasing the allocation size,
but instead just have the note collecting code utilize the array better.
This way the allocation can stay smaller.
Even in the case of no arch's that have gaps in their regset views, this
introduces a change in the resulting indicies of t->notes. It does not
introduce any changes to the core file itself, because any blank notes are
skipped in write_note_info().
In case, the allocation logic between fill_note_info() and
fill_thread_core_info() ever diverges from the usage logic, warn and skip
writing any notes that would overflow the array.
This fix is derrived from an earlier one[0] by Yu-cheng Yu.
[0] https://lore.kernel.org/lkml/20180717162502.32274-1-yu-cheng.yu@intel.com/
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220317192013.13655-4-rick.p.edgecombe@intel.com
|
|
Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.
No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.
Fixes: aaa4db12ef7b ("io_uring: accept directly into fixed file table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let's enable GC_URGENT_HIGH mode during f2fs_disable_checkpoint(),
so that we can use SSR allocator for GCed data/node persistence,
it can improve the performance due to it avoiding migration of
data/node locates in selected target segment of SSR allocator.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220314115354.144023-5-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
