| Age | Commit message (Collapse) | Author |
|---|
|
Replace the two steps of dax_iomap_sector and bdev_dax_pgoff with a
single dax_iomap_pgoff helper that avoids lots of cumbersome sector
conversions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-15-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Just pass the vm_fault and iomap_iter structures, and figure out the rest
locally. Note that this requires moving dax_iomap_sector up in the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-14-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Despite its name copy_user_page expected kernel addresses, which is what
we already have.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-13-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Factor out another DAX setup helper to simplify future changes. Also
move the experimental warning after the checks to not clutter the log
too much if the setup failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-8-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CONFIG_DAX_DRIVER only selects CONFIG_DAX now, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit 486408d690e1 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
|
|
No functional changes in this patch, just in preparation for efficiently
calling this light function from the block O_DIRECT handling.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes: c88f7dcd6d64 ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In a few places the vfs needs to interact with bare k{g,u}ids directly
instead of struct inode. These are just a few. In previous patches we
introduced low-level mapping helpers that are able to support
filesystems mounted an idmapping. This patch simply converts the places
to use these new helpers.
Link: https://lore.kernel.org/r/20211123114227.3124056-7-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-7-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The low-level mapping helpers were so far crammed into fs.h. They are
out of place there. The fs.h header should just contain the higher-level
mapping helpers that interact directly with vfs objects such as struct
super_block or struct inode and not the bare mapping helpers. Similarly,
only vfs and specific fs code shall interact with low-level mapping
helpers. And so they won't be made accessible automatically through
regular {g,u}id helpers.
Link: https://lore.kernel.org/r/20211123114227.3124056-3-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-3-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Marek reported the warning below.
=========================
WARNING: held lock freed!
5.16.0-rc2+ #10984 Not tainted
-------------------------
kworker/1:0/18 is freeing memory ffff00004034e200-ffff00004034e3ff,
with a lock still held there!
ffff00004034e348 (&root->kernfs_rwsem){++++}-{3:3}, at:
__kernfs_remove+0x310/0x37c
3 locks held by kworker/1:0/18:
#0: ffff000040107938 ((wq_completion)cgroup_destroy){+.+.}-{0:0}, at:
process_one_work+0x1f0/0x6f0
#1: ffff80000b55bdc0
((work_completion)(&(&css->destroy_rwork)->work)){+.+.}-{0:0}, at:
process_one_work+0x1f0/0x6f0
#2: ffff00004034e348 (&root->kernfs_rwsem){++++}-{3:3}, at:
__kernfs_remove+0x310/0x37c
stack backtrace:
CPU: 1 PID: 18 Comm: kworker/1:0 Not tainted 5.16.0-rc2+ #10984
Hardware name: Raspberry Pi 4 Model B (DT)
Workqueue: cgroup_destroy css_free_rwork_fn
Call trace:
dump_backtrace+0x0/0x1ac
show_stack+0x18/0x24
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
debug_check_no_locks_freed+0x124/0x140
kfree+0xf0/0x3a4
kernfs_put+0x1f8/0x224
__kernfs_remove+0x1b8/0x37c
kernfs_destroy_root+0x38/0x50
css_free_rwork_fn+0x288/0x3d4
process_one_work+0x288/0x6f0
worker_thread+0x74/0x470
kthread+0x188/0x194
ret_from_fork+0x10/0x20
Since kernfs moves the kernfs_rwsem lock into root, it couldn't hold
the lock when the root node is tearing down. Thus, get the refcount
of root node.
Fixes: 393c3714081a ("kernfs: switch global kernfs_rwsem lock to per-fs lock")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211201231648.1027165-1-minchan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When gfs2_lookup_by_inum() calls gfs2_inode_lookup() for an uncached
inode, gfs2_inode_lookup() will place a new tentative inode into the
inode cache before verifying that there is a valid inode at the given
address. This can race with gfs2_create_inode() which doesn't check for
duplicates inodes. gfs2_create_inode() will try to assign the new inode
to the corresponding inode glock, and glock_set_object() will complain
that the glock is still in use by gfs2_inode_lookup's tentative inode.
We noticed this bug after adding commit 486408d690e1 ("gfs2: Cancel
remote delete work asynchronously") which allowed delete_work_func() to
race with gfs2_create_inode(), but the same race exists for
open-by-handle.
Fix that by switching from insert_inode_hash() to
insert_inode_locked4(), which does check for duplicate inodes. We know
we've just managed to to allocate the new inode, so an inode tentatively
created by gfs2_inode_lookup() will eventually go away and
insert_inode_locked4() will always succeed.
In addition, don't flush the inode glock work anymore (this can now only
make things worse) and clean up glock_{set,clear}_object for the inode
glock somewhat.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rework gfs2_inode_lookup() to only set up the new inode's glocks after
verifying that the new inode is valid.
There is no need for flushing the inode glock work queue anymore now,
so remove that as well.
While at it, get rid of the useless wrapper around iget5_locked() and
its unnecessary is_bad_inode() check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_inode_lookup, once the inode has been looked up, we check if the
inode generation (no_formal_ino) is the one we're looking for. If it
isn't and the inode wasn't in the inode cache, we discard the newly
looked up inode. This is unnecessary, complicates the code, and makes
future changes to gfs2_inode_lookup harder, so change the code to retain
newly looked up inodes instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When we mock up a temporary holder in gfs2_glock_cb to demote weak holders in
response to a remote locking conflict, we don't set the HIF_HOLDER flag. This
causes function may_grant to BUG. Fix by setting the missing HIF_HOLDER flag
in the mock glock holder.
In addition, define the mock glock holder where it is used.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This ASSERT in xfs_rename is a) incorrect, because
(RENAME_WHITEOUT|RENAME_NOREPLACE) is a valid combination, and
b) unnecessary, because actual invalid flag combinations are already
handled at the vfs level in do_renameat2() before we get called.
So, remove it.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Ceph always inherits the SGID bit if it is set on the parent inode,
while the generic inode_init_owner does not do this in a few cases where
it can create a possible security problem (cf. [1]).
Update ceph to strip the SGID bit just as inode_init_owner would.
This bug was detected by the mapped mount testsuite in [3]. The
testsuite tests all core VFS functionality and semantics with and
without mapped mounts. That is to say it functions as a generic VFS
testsuite in addition to a mapped mount testsuite. While working on
mapped mount support for ceph, SIGD inheritance was the only failing
test for ceph after the port.
The same bug was detected by the mapped mount testsuite in XFS in
January 2021 (cf. [2]).
[1]: commit 0fa3ecd87848 ("Fix up non-directory creation in SGID directories")
[2]: commit 01ea173e103e ("xfs: fix up non-directory creation in SGID directories")
[3]: https://git.kernel.org/fs/xfs/xfstests-dev.git
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The smatch static checker warned about an uninitialized symbol usage in
this function, in the case where ceph_mdsc_build_path returns an error.
It turns out that that case is harmless, but it just looks sketchy.
Initialize the variable at declaration time, and remove the unneeded
setting of it later.
Fixes: a33f6432b3a6 ("ceph: encode inodes' parent/d_name in cap reconnect message")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Newer compilers seem to determine that this variable being uninitialized
isn't a problem, but older compilers (from the RHEL8 era) seem to choke
on it and complain that it could be used uninitialized.
Go ahead and initialize the variable at declaration time to silence
potential compiler warnings.
Fixes: c3d8e0b5de48 ("ceph: return the real size read when it hits EOF")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
opened_inodes is incremented twice when the same inode is opened twice
with O_RDONLY and O_WRONLY respectively.
To reproduce, run this python script, then check the metrics:
import os
for _ in range(10000):
fd_r = os.open('a', os.O_RDONLY)
fd_w = os.open('a', os.O_WRONLY)
os.close(fd_r)
os.close(fd_w)
Fixes: 1dd8d4708136 ("ceph: metrics for opened files, pinned caps and opened inodes")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Renaming lz4_0padding to zero_padding globally since LZMA and later
algorithms also need that.
Link: https://lore.kernel.org/r/20211112160935.19394-1-jnhuang95@gmail.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Adjust the netfslib docs in light of the foliation changes.
Also un-kdoc-mark netfs_skip_folio_read() since it's internal and isn't
part of the API.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cachefs@redhat.com
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/163706992597.3179783.18360472879717076435.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Like commit f6223ff79966, timeout removal should also validate the
timespec that is being passed in.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211129041537.1936270-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ksmbd fixes from Steve French:
"Five ksmbd server fixes, four of them for stable:
- memleak fix
- fix for default data stream on filesystems that don't support xattr
- error logging fix
- session setup fix
- minor doc cleanup"
* tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix memleak in get_file_stream_info()
ksmbd: contain default data stream even if xattr is empty
ksmbd: downgrade addition info error msg to debug in smb2_get_info_sec()
docs: filesystem: cifs: ksmbd: Fix small layout issues
ksmbd: Fix an error handling path in 'smb2_sess_setup()'
|
|
NTFS_RW code allocates page size dependent arrays on the stack. This
results in build failures if the page size is 64k or larger.
fs/ntfs/aops.c: In function 'ntfs_write_mst_block':
fs/ntfs/aops.c:1311:1: error:
the frame size of 2240 bytes is larger than 2048 bytes
Since commit f22969a66041 ("powerpc/64s: Default to 64K pages for 64 bit
book3s") this affects ppc:allmodconfig builds, but other architectures
supporting page sizes of 64k or larger are also affected.
Increasing the maximum frame size for affected architectures just to
silence this error does not really help. The frame size would have to
be set to a really large value for 256k pages. Also, a large frame size
could potentially result in stack overruns in this code and elsewhere
and is therefore not desirable. Make NTFS_RW dependent on page sizes
smaller than 64k instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs fixes from Darrick Wong:
"Fixes for a resource leak and a build robot complaint about totally
dead code:
- Fix buffer resource leak that could lead to livelock on corrupt fs.
- Remove unused function xfs_inew_wait to shut up the build robots"
* tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove xfs_inew_wait
xfs: Fix the free logic of state in xfs_attr_node_hasname
|
|
Pull iomap fixes from Darrick Wong:
"A single iomap bug fix and a cleanup for 5.16-rc2.
The bug fix changes how iomap deals with reading from an inline data
region -- whereas the current code (incorrectly) lets the iomap read
iter try for more bytes after reading the inline region (which zeroes
the rest of the page!) and hopes the next iteration terminates, we
surveyed the inlinedata implementations and realized that all
inlinedata implementations also require that the inlinedata region end
at EOF, so we can simply terminate the read.
The second patch documents these assumptions in the code so that
they're not subtle implications anymore, and cleans up some of the
grosser parts of that function.
Summary:
- Fix an accounting problem where unaligned inline data reads can run
off the end of the read iomap iterator. iomap has historically
required that inline data mappings only exist at the end of a file,
though this wasn't documented anywhere.
- Document iomap_read_inline_data and change its return type to be
appropriate for the information that it's actually returning"
* tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: iomap_read_inline_data cleanup
iomap: Fix inline extent handling in iomap_readpage
|
|
Pull more io_uring fixes from Jens Axboe:
"The locking fixup that was applied earlier this rc has both a deadlock
and IRQ safety issue, let's get that ironed out before -rc3. This
contains:
- Link traversal locking fix (Pavel)
- Cancelation fix (Pavel)
- Relocate cond_resched() for huge buffer chain freeing, avoiding a
softlockup warning (Ye)
- Fix timespec validation (Ye)"
* tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-block:
io_uring: Fix undefined-behaviour in io_issue_sqe
io_uring: fix soft lockup when call __io_remove_buffers
io_uring: fix link traversal locking
io_uring: fail cancellation for EXITING tasks
|
|
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv42: Fix pagecache invalidation after COPY/CLONE
Bugfixes:
- NFSv42: Don't fail clone() just because the server failed to return
post-op attributes
- SUNRPC: use different lockdep keys for INET6 and LOCAL
- NFSv4.1: handle NFS4ERR_NOSPC from CREATE_SESSION
- SUNRPC: fix header include guard in trace header"
* tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: use different lock keys for INET6 and LOCAL
sunrpc: fix header include guard in trace header
NFSv4.1: handle NFS4ERR_NOSPC by CREATE_SESSION
NFSv42: Fix pagecache invalidation after COPY/CLONE
NFS: Add a tracepoint to show the results of nfs_set_cache_invalid()
NFSv42: Don't fail clone() unless the OP_CLONE operation failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"Fix an ABBA deadlock introduced by XArray conversion"
* tag 'erofs-for-5.16-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix deadlock when shrink erofs slab
|
|
We got issue as follows:
================================================================================
UBSAN: Undefined behaviour in ./include/linux/ktime.h:42:14
signed integer overflow:
-4966321760114568020 * 1000000000 cannot be represented in type 'long long int'
CPU: 1 PID: 2186 Comm: syz-executor.2 Not tainted 4.19.90+ #12
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x170/0x1dc lib/dump_stack.c:118
ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
handle_overflow+0x188/0x1dc lib/ubsan.c:192
__ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213
ktime_set include/linux/ktime.h:42 [inline]
timespec64_to_ktime include/linux/ktime.h:78 [inline]
io_timeout fs/io_uring.c:5153 [inline]
io_issue_sqe+0x42c8/0x4550 fs/io_uring.c:5599
__io_queue_sqe+0x1b0/0xbc0 fs/io_uring.c:5988
io_queue_sqe+0x1ac/0x248 fs/io_uring.c:6067
io_submit_sqe fs/io_uring.c:6137 [inline]
io_submit_sqes+0xed8/0x1c88 fs/io_uring.c:6331
__do_sys_io_uring_enter fs/io_uring.c:8170 [inline]
__se_sys_io_uring_enter fs/io_uring.c:8129 [inline]
__arm64_sys_io_uring_enter+0x490/0x980 fs/io_uring.c:8129
invoke_syscall arch/arm64/kernel/syscall.c:53 [inline]
el0_svc_common+0x374/0x570 arch/arm64/kernel/syscall.c:121
el0_svc_handler+0x190/0x260 arch/arm64/kernel/syscall.c:190
el0_svc+0x10/0x218 arch/arm64/kernel/entry.S:1017
================================================================================
As ktime_set only judge 'secs' if big than KTIME_SEC_MAX, but if we pass
negative value maybe lead to overflow.
To address this issue, we must check if 'sec' is negative.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211118015907.844807-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I got issue as follows:
[ 567.094140] __io_remove_buffers: [1]start ctx=0xffff8881067bf000 bgid=65533 buf=0xffff8881fefe1680
[ 594.360799] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u32:5:108]
[ 594.364987] Modules linked in:
[ 594.365405] irq event stamp: 604180238
[ 594.365906] hardirqs last enabled at (604180237): [<ffffffff93fec9bd>] _raw_spin_unlock_irqrestore+0x2d/0x50
[ 594.367181] hardirqs last disabled at (604180238): [<ffffffff93fbbadb>] sysvec_apic_timer_interrupt+0xb/0xc0
[ 594.368420] softirqs last enabled at (569080666): [<ffffffff94200654>] __do_softirq+0x654/0xa9e
[ 594.369551] softirqs last disabled at (569080575): [<ffffffff913e1d6a>] irq_exit_rcu+0x1ca/0x250
[ 594.370692] CPU: 2 PID: 108 Comm: kworker/u32:5 Tainted: G L 5.15.0-next-20211112+ #88
[ 594.371891] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 594.373604] Workqueue: events_unbound io_ring_exit_work
[ 594.374303] RIP: 0010:_raw_spin_unlock_irqrestore+0x33/0x50
[ 594.375037] Code: 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 55 f5 55 fd 48 89 ef e8 ed a7 56 fd 80 e7 02 74 06 e8 43 13 7b fd fb bf 01 00 00 00 <e8> f8 78 474
[ 594.377433] RSP: 0018:ffff888101587a70 EFLAGS: 00000202
[ 594.378120] RAX: 0000000024030f0d RBX: 0000000000000246 RCX: 1ffffffff2f09106
[ 594.379053] RDX: 0000000000000000 RSI: ffffffff9449f0e0 RDI: 0000000000000001
[ 594.379991] RBP: ffffffff9586cdc0 R08: 0000000000000001 R09: fffffbfff2effcab
[ 594.380923] R10: ffffffff977fe557 R11: fffffbfff2effcaa R12: ffff8881b8f3def0
[ 594.381858] R13: 0000000000000246 R14: ffff888153a8b070 R15: 0000000000000000
[ 594.382787] FS: 0000000000000000(0000) GS:ffff888399c00000(0000) knlGS:0000000000000000
[ 594.383851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 594.384602] CR2: 00007fcbe71d2000 CR3: 00000000b4216000 CR4: 00000000000006e0
[ 594.385540] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 594.386474] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 594.387403] Call Trace:
[ 594.387738] <TASK>
[ 594.388042] find_and_remove_object+0x118/0x160
[ 594.389321] delete_object_full+0xc/0x20
[ 594.389852] kfree+0x193/0x470
[ 594.390275] __io_remove_buffers.part.0+0xed/0x147
[ 594.390931] io_ring_ctx_free+0x342/0x6a2
[ 594.392159] io_ring_exit_work+0x41e/0x486
[ 594.396419] process_one_work+0x906/0x15a0
[ 594.399185] worker_thread+0x8b/0xd80
[ 594.400259] kthread+0x3bf/0x4a0
[ 594.401847] ret_from_fork+0x22/0x30
[ 594.402343] </TASK>
Message from syslogd@localhost at Nov 13 09:09:54 ...
kernel:watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u32:5:108]
[ 596.793660] __io_remove_buffers: [2099199]start ctx=0xffff8881067bf000 bgid=65533 buf=0xffff8881fefe1680
We can reproduce this issue by follow syzkaller log:
r0 = syz_io_uring_setup(0x401, &(0x7f0000000300), &(0x7f0000003000/0x2000)=nil, &(0x7f0000ff8000/0x4000)=nil, &(0x7f0000000280)=<r1=>0x0, &(0x7f0000000380)=<r2=>0x0)
sendmsg$ETHTOOL_MSG_FEATURES_SET(0xffffffffffffffff, &(0x7f0000003080)={0x0, 0x0, &(0x7f0000003040)={&(0x7f0000000040)=ANY=[], 0x18}}, 0x0)
syz_io_uring_submit(r1, r2, &(0x7f0000000240)=@IORING_OP_PROVIDE_BUFFERS={0x1f, 0x5, 0x0, 0x401, 0x1, 0x0, 0x100, 0x0, 0x1, {0xfffd}}, 0x0)
io_uring_enter(r0, 0x3a2d, 0x0, 0x0, 0x0, 0x0)
The reason above issue is 'buf->list' has 2,100,000 nodes, occupied cpu lead
to soft lockup.
To solve this issue, we need add schedule point when do while loop in
'__io_remove_buffers'.
After add schedule point we do regression, get follow data.
[ 240.141864] __io_remove_buffers: [1]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00
[ 268.408260] __io_remove_buffers: [1]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180
[ 275.899234] __io_remove_buffers: [2099199]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00
[ 296.741404] __io_remove_buffers: [1]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380
[ 305.090059] __io_remove_buffers: [2099199]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180
[ 325.415746] __io_remove_buffers: [1]start ctx=0xffff8881b92d1000 bgid=65533 buf=0xffff8881a17d8f00
[ 333.160318] __io_remove_buffers: [2099199]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380
...
Fixes:8bab4c09f24e("io_uring: allow conditional reschedule for intensive iterators")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211122024737.2198530-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression caused by a bugfix in the previous release. The
symptom is a VM_BUG_ON triggered from splice to the fuse device.
Unfortunately the original bugfix was already backported to a number
of stable releases, so this fix-fix will need to be backported as
well"
* tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release pipe buf after last use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix to the lzo code, a missing put_page causing memory leaks
when some error branches are taken"
* tag 'for-5.16-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the memory leak caused in lzo_compress_pages()
|
|
WARNING: inconsistent lock state
5.16.0-rc2-syzkaller #0 Not tainted
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
ffff888078e11418 (&ctx->timeout_lock
){?.+.}-{2:2}
, at: io_timeout_fn+0x6f/0x360 fs/io_uring.c:5943
{HARDIRQ-ON-W} state was registered at:
[...]
spin_unlock_irq include/linux/spinlock.h:399 [inline]
__io_poll_remove_one fs/io_uring.c:5669 [inline]
__io_poll_remove_one fs/io_uring.c:5654 [inline]
io_poll_remove_one+0x236/0x870 fs/io_uring.c:5680
io_poll_remove_all+0x1af/0x235 fs/io_uring.c:5709
io_ring_ctx_wait_and_kill+0x1cc/0x322 fs/io_uring.c:9534
io_uring_release+0x42/0x46 fs/io_uring.c:9554
__fput+0x286/0x9f0 fs/file_table.c:280
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xc14/0x2b40 kernel/exit.c:832
674ee8e1b4a41 ("io_uring: correct link-list traversal locking") fixed a
data race but introduced a possible deadlock and inconsistentcy in irq
states. E.g.
io_poll_remove_all()
spin_lock_irq(timeout_lock)
io_poll_remove_one()
spin_lock/unlock_irq(poll_lock);
spin_unlock_irq(timeout_lock)
Another type of problem is freeing a request while holding
->timeout_lock, which may leads to a deadlock in
io_commit_cqring() -> io_flush_timeouts() and other places.
Having 3 nested locks is also too ugly. Add io_match_task_safe(), which
would briefly take and release timeout_lock for race prevention inside,
so the actuall request cancellation / free / etc. code doesn't have it
taken.
Reported-by: syzbot+ff49a3059d49b0ca0eec@syzkaller.appspotmail.com
Reported-by: syzbot+847f02ec20a6609a328b@syzkaller.appspotmail.com
Reported-by: syzbot+3368aadcd30425ceb53b@syzkaller.appspotmail.com
Reported-by: syzbot+51ce8887cdef77c9ac83@syzkaller.appspotmail.com
Reported-by: syzbot+3cb756a49d2f394a9ee3@syzkaller.appspotmail.com
Fixes: 674ee8e1b4a41 ("io_uring: correct link-list traversal locking")
Cc: stable@kernel.org # 5.15+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/397f7ebf3f4171f1abe41f708ac1ecb5766f0b68.1637937097.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
WARNING: CPU: 1 PID: 20 at fs/io_uring.c:6269 io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269
CPU: 1 PID: 20 Comm: kworker/1:0 Not tainted 5.16.0-rc1-syzkaller #0
Workqueue: events io_fallback_req_func
RIP: 0010:io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269
Call Trace:
<TASK>
io_req_task_link_timeout+0x6b/0x1e0 fs/io_uring.c:6886
io_fallback_req_func+0xf9/0x1ae fs/io_uring.c:1334
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
We need original task's context to do cancellations, so if it's dying
and the callback is executed in a fallback mode, fail the cancellation
attempt.
Fixes: 89b263f6d56e6 ("io_uring: run linked timeouts from task_work")
Cc: stable@kernel.org # 5.15+
Reported-by: syzbot+ab0cfe96c2b3cd1c1153@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4c41c5f379c6941ad5a07cd48cb66ed62199cf7e.1637937097.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
[BUG]
Fstests generic/027 is pretty easy to trigger a slow but steady memory
leak if run with "-o compress=lzo" mount option.
Normally one single run of generic/027 is enough to eat up at least 4G ram.
[CAUSE]
In commit d4088803f511 ("btrfs: subpage: make lzo_compress_pages()
compatible") we changed how @page_in is released.
But that refactoring makes @page_in only released after all pages being
compressed.
This leaves error path not releasing @page_in. And by "error path"
things like incompressible data will also be treated as an error
(-E2BIG).
Thus it can cause a memory leak if even nothing wrong happened.
[FIX]
Add check under @out label to release @page_in when needed, so when we
hit any error, the input page is properly released.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: d4088803f511 ("btrfs: subpage: make lzo_compress_pages() compatible")
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The MNT_WRITE_HOLD flag is used to hold back any new writers while the
mount point is about to be made read-only. __mnt_want_write() then loops
with disabled preemption until this flag disappears. Callers of
mnt_hold_writers() (which sets the flag) hold the spinlock_t of
mount_lock (seqlock_t) which disables preemption on !PREEMPT_RT and
ensures the task is not scheduled away so that the spinning side spins
for a long time.
On PREEMPT_RT the spinlock_t does not disable preemption and so it is
possible that the task setting MNT_WRITE_HOLD is preempted by task with
higher priority which then spins infinitely waiting for MNT_WRITE_HOLD
to get removed.
Acquire mount_lock::lock which is held by setter of MNT_WRITE_HOLD. This
will PI-boost the owner and wait until the lock is dropped and which
means that MNT_WRITE_HOLD is cleared again.
Link: https://lore.kernel.org/r/20211025152218.opvcqfku2lhqvp4o@linutronix.de
Link: https://lore.kernel.org/r/20211125120711.dgbsienyrsxfzpoi@linutronix.de
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Pull io_uring fixes from Jens Axboe:
"A locking fix for link traversal, and fixing up an outdated function
name in a comment"
* tag 'io_uring-5.16-2021-11-25' of git://git.kernel.dk/linux-block:
io_uring: correct link-list traversal locking
io_uring: fix missed comment from *task_file rename
|
|
Pull cifs fixes from Steve French:
"Four small cifs/smb3 fixes:
- two multichannel fixes
- fix problem noted by kernel test robot
- update internal version number"
* tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb2: clarify rc initialization in smb2_reconnect
cifs: populate server_hostname for extra channels
cifs: nosharesock should be set on new server
|
|
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
|
