| Age | Commit message (Collapse) | Author |
|---|
|
Before this patch, when a glock was locked, the very first holder on the
queue would unlock the lockref and call the go_instantiate glops function
(if one existed), unless GL_SKIP was specified. When we introduced the new
node-scope concept, we allowed multiple holders to lock glocks in EX mode
and share the lock.
But node-scope introduced a new problem: if the first holder has GL_SKIP
and the next one does NOT, since it is not the first holder on the queue,
the go_instantiate op was not called. Eventually the GL_SKIP holder may
call the instantiate sub-function (e.g. gfs2_rgrp_bh_get) but there was
still a window of time in which another non-GL_SKIP holder assumes the
instantiate function had been called by the first holder. In the case of
rgrp glocks, this led to a NULL pointer dereference on the buffer_heads.
This patch tries to fix the problem by introducing two new glock flags:
GLF_INSTANTIATE_NEEDED, which keeps track of when the instantiate function
needs to be called to "fill in" or "read in" the object before it is
referenced.
GLF_INSTANTIATE_IN_PROG which is used to determine when a process is
in the process of reading in the object. Whenever a function needs to
reference the object, it checks the GLF_INSTANTIATE_NEEDED flag, and if
set, it sets GLF_INSTANTIATE_IN_PROG and calls the glops "go_instantiate"
function.
As before, the gl_lockref spin_lock is unlocked during the IO operation,
which may take a relatively long amount of time to complete. While
unlocked, if another process determines go_instantiate is still needed,
it sees GLF_INSTANTIATE_IN_PROG is set, and waits for the go_instantiate
glop operation to be completed. Once GLF_INSTANTIATE_IN_PROG is cleared,
it needs to check GLF_INSTANTIATE_NEEDED again because the other process's
go_instantiate operation may not have been successful.
Functions that previously called the instantiate sub-functions now call
directly into gfs2_instantiate so the new bits are managed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, function do_promote had a section of code that did
the actual instantiation. This patch splits that off into its own
function, gfs2_instantiate, which prepares us for the next patch that
will use that function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch further simplifies function do_promote by eliminating some
redundant code in favor of using a lock_released flag. This is just
prep work for a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch simply re-factors function do_promote to reduce the indents.
The logic should be unchanged. This makes future patches more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Remove the 'first' argument of trace_gfs2_promote: with GL_SKIP, the
'first' holder isn't the one that instantiates the glock
(gl_instantiate), which is what the 'first' flag was apparently supposed
to indicate.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the go_lock glock operations (glops) did not do
any actual locking. They were used to instantiate objects, like reading
in dinodes and rgrps from the media.
This patch renames the functions to go_instantiate for clarity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, failed consistency checks printed out the object
that failed, but not the object's glock. This patch makes it also
print out the object glock so we can see the glock's holders and flags
to aid with debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, if function gfs2_inode_lookup encountered an error
after it had locked the iopen glock, it never unlocked it, relying on
the evict code to do the cleanup. The evict code then took the
inode glock while holding the iopen glock, which violates the locking
order. For example,
(1) node A does a gfs2_inode_lookup that fails, leaving the iopen glock
locked.
(2) node B calls delete_work_func -> gfs2_lookup_by_inum ->
gfs2_inode_lookup. It locks the inode glock and blocks trying to
lock the iopen glock, which is held by node A.
(3) node A eventually calls gfs2_evict_inode -> evict_should_delete.
It blocks trying to lock the inode glock, which is now held by
node B.
This patch introduces error handling to function gfs2_inode_lookup
so it properly dequeues held iopen glocks on errors.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, when a glock was locked by function gfs2_glock_nq_init,
it initialized the holder gh_ip (return address) as gfs2_glock_nq_init.
That made it extremely difficult to track down problems because many
functions call gfs2_glock_nq_init. This patch changes the function so
that it saves gh_ip from the caller of gfs2_glock_nq_init, which makes
it easy to backtrack which holder took the lock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, function do_gfs2_set_flags checked if the append
and immutable flags were being set while already set. If so, error -EPERM
was given. There's no reason why these two flags should be mutually
exclusive, and if you set them separately, you will, in essence, set
one while it is already set. For example:
chattr +a /mnt/gfs2/file1
chattr +i /mnt/gfs2/file1
The first command sets the append-only flag. Since they are additive,
the second command sets the immutable flag AND append-only flag,
since they both coexist in i_diskflags. So the second command should
not return an error. This bug caused xfstests generic/545 to fail.
This patch simply removes the invalid checks.
I also eliminated an unused parm from do_gfs2_set_flags.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In rgrp.c, there are several places where it does BUG_ON. This tells us
the call stack but nothing more, which is not very helpful.
This patch switches them to GLOCK_BUG_ON which also prints the glock,
its holders, and many of the rgrp values, which will help us debug
problems in the future.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, each individual "go_lock" glock operation (glop)
checked the GL_SKIP flag, and if set, would skip further processing.
This patch changes the logic so the go_lock caller, function go_promote,
checks the GL_SKIP flag before calling the go_lock op in the first place.
This avoids having to unnecessarily unlock gl_lockref.lock only to
re-lock it again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Somehow, the GL_SKIP flag was missed when dumping glock holders.
This patch adds it to function hflags2str. I added it at the end because
I wanted Holder and Skip flags together to read "Hs" rather than "sH"
to avoid confusion with "Shared" ("SH") holder state.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, function gfs2_rgrp_go_lock checked if GL_SKIP and
ar_rgrplvb were both true. However, GL_SKIP is only set for rgrps if
ar_rgrplvb is true (see gfs2_inplace_reserve). This patch simply removes
the redundant check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Also disable page faults during direct I/O requests and implement a
similar kind of retry logic as in the buffered I/O case.
The retry logic in the direct I/O case differs from the buffered I/O
case in the following way: direct I/O doesn't provide the kinds of
consistency guarantees between concurrent reads and writes that buffered
I/O provides, so once we lose the inode glock while faulting in user
pages, we always resume the operation. We never need to return a
partial read or write.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently, ->lru is a way to arrange non-LRU pages and has some
in-kernel users. In order to minimize noticable issues of page
reclaim and cache thrashing under high memory presure, limited
temporary pages were all chained with ->lru and can be reused
during the request. However, it seems that ->lru could be removed
when folio is landing.
Let's use page->private to chain temporary pages for now instead
and transform EROFS formally after the topic of the folio / file
page design is finalized.
Link: https://lore.kernel.org/r/20211022090120.14675-1-hsiangkao@linux.alibaba.com
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Pull autofs fix from Al Viro:
"Fix for a braino of mine (in getting rid of open-coded
dentry_path_raw() in autofs a couple of cycles ago).
Mea culpa... Obvious -stable fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs: fix wait name hash calculation in autofs_wait()
|
|
Pull ksmbd fixes from Steve French:
"Ten fixes for the ksmbd kernel server, for improved security and
additional buffer overflow checks:
- a security improvement to session establishment to reduce the
possibility of dictionary attacks
- fix to ensure that maximum i/o size negotiated in the protocol is
not less than 64K and not more than 8MB to better match expected
behavior
- fix for crediting (flow control) important to properly verify that
sufficient credits are available for the requested operation
- seven additional buffer overflow, buffer validation checks"
* tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add buffer validation in session setup
ksmbd: throttle session setup failures to avoid dictionary attacks
ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests
ksmbd: validate credit charge after validating SMB2 PDU body size
ksmbd: add buffer validation for smb direct
ksmbd: limit read/write/trans buffer size not to exceed 8MB
ksmbd: validate compound response buffer
ksmbd: fix potencial 32bit overflow from data area check in smb2_write
ksmbd: improve credits management
ksmbd: add validation in smb2_ioctl
|
|
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
When a user copy fails in one of the helpers of iomap_dio_rw, fail with
-EFAULT instead of returning 0. This matches what iomap_dio_bio_actor
returns when it gets an -EFAULT from bio_iov_iter_get_pages. With these
changes, iomap_dio_actor now consistently fails with -EFAULT when a user
page cannot be faulted in.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In the .read_iter and .write_iter file operations, we're accessing
user-space memory while holding the inode glock. There is a possibility
that the memory is mapped to the same file, in which case we'd recurse
on the same glock.
We could detect and work around this simple case of recursive locking,
but more complex scenarios exist that involve multiple glocks,
processes, and cluster nodes, and working around all of those cases
isn't practical or even possible.
Avoid these kinds of problems by disabling page faults while holding the
inode glock. If a page fault would occur, we either end up with a
partial read or write or with -EFAULT if nothing could be read or
written. In either case, we know that we're not done with the
operation, so we indicate that we're willing to give up the inode glock
and then we fault in the missing pages. If that made us lose the inode
glock, we return a partial read or write. Otherwise, we resume the
operation.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Use io_worker_release() instead of hand coding it in io_worker_exit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6f95f09d2cdbafcbb2e22ad0d1a2bc4d3962bf65.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fixes from Jens Axboe:
"Two fixes for the max workers limit API that was introduced this
series: one fix for an issue with that code, and one fixing a linked
timeout regression in this series"
* tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
io_uring: apply worker limits to previous users
io_uring: fix ltimeout unprep
io_uring: apply max_workers limit to all future users
io-wq: max_worker fixes
|
|
The current logic of requests with IOSQE_ASYNC is first queueing it to
io-worker, then execute it in a synchronous way. For unbound works like
pollable requests(e.g. read/write a socketfd), the io-worker may stuck
there waiting for events for a long time. And thus other works wait in
the list for a long time too.
Let's introduce a new way for unbound works (currently pollable
requests), with this a request will first be queued to io-worker, then
executed in a nonblock try rather than a synchronous way. Failure of
that leads it to arm poll stuff and then the worker can begin to handle
other works.
The detail process of this kind of requests is:
step1: original context:
queue it to io-worker
step2: io-worker context:
nonblock try(the old logic is a synchronous try here)
|
|--fail--> arm poll
|
|--(fail/ready)-->synchronous issue
|
|--(succeed)-->worker finish it's job, tw
take over the req
This works much better than the old IOSQE_ASYNC logic in cases where
unbound max_worker is relatively small. In this case, number of
io-worker eazily increments to max_worker, new worker cannot be created
and running workers stuck there handling old works in IOSQE_ASYNC mode.
In my 64-core machine, set unbound max_worker to 20, run echo-server,
turns out:
(arguments: register_file, connetion number is 1000, message size is 12
Byte)
original IOSQE_ASYNC: 76664.151 tps
after this patch: 166934.985 tps
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211018133445.103438-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If writeback I/O to a COW extent fails, the COW fork blocks are
punched out and the data fork blocks left alone. It is possible for
COW fork blocks to overlap non-shared data fork blocks (due to
cowextsz hint prealloc), however, and writeback unconditionally maps
to the COW fork whenever blocks exist at the corresponding offset of
the page undergoing writeback. This means it's quite possible for a
COW fork extent to overlap delalloc data fork blocks, writeback to
convert and map to the COW fork blocks, writeback to fail, and
finally for ioend completion to cancel the COW fork blocks and leave
stale data fork delalloc blocks around in the inode. The blocks are
effectively stale because writeback failure also discards dirty page
state.
If this occurs, it is likely to trigger assert failures, free space
accounting corruption and failures in unrelated file operations. For
example, a subsequent reflink attempt of the affected file to a new
target file will trip over the stale delalloc in the source file and
fail. Several of these issues are occasionally reproduced by
generic/648, but are reproducible on demand with the right sequence
of operations and timely I/O error injection.
To fix this problem, update the ioend failure path to also punch out
underlying data fork delalloc blocks on I/O error. This is analogous
to the writeback submission failure path in xfs_discard_page() where
we might fail to map data fork delalloc blocks and consistent with
the successful COW writeback completion path, which is responsible
for unmapping from the data fork and remapping in COW fork blocks.
Fixes: 787eb485509f ("xfs: fix and streamline error handling in xfs_end_io")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The owner info parameter is always NULL, so get rid of the parameter.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
We only use EFIs to free metadata blocks -- not regular data/attr fork
extents. Remove all the fields that we never use, for a net reduction
of 16 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
xfs_bmap_add_free isn't a block mapping function; it schedules deferred
freeing operations for a later point in a compound transaction chain.
While it's primarily used by bunmapi, its use has expanded beyond that.
Move it to xfs_alloc.c and rename the function since it's now general
freeing functionality. Bring the slab cache bits in line with the
way we handle the other intent items.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
Create slab caches for the high-level structures that coordinate
deferred intent items, since they're used fairly heavily.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
Rearrange these structs to reduce the amount of unused padding bytes.
This saves eight bytes for each of the three structs changed here, which
means they're now all (rmap/bmap are 64 bytes, refc is 32 bytes) even
powers of two.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
Now that we've gotten rid of the kmem_zone_t typedef, rename the
variables to _cache since that's what they are.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
Remove these typedefs by referencing kmem_cache directly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Syzbot discovered a race in case of reusing the fuse sb (introduced in
this cycle).
Fix it by doing the s_fs_info initialization at the proper place"
* tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up error exits in fuse_fill_super()
fuse: always initialize sb->s_fs_info
fuse: clean up fuse_mount destruction
fuse: get rid of fuse_put_super()
fuse: check s_root when destroying sb
|
|
Rename didn't decrement/clear nlink on overwritten target inode.
Create a common helper fuse_entry_unlinked() that handles this for unlink,
rmdir and rename.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use list_first_entry_or_null() instead of list_empty() + list_entry().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Logically it belongs there since attributes are invalidated due to the
updated ctime. This is a cleanup and should not change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
'ia->io=io' has been set in fuse_io_alloc.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Due to the introduction of kmap_local_*, the storage of slots used for
short-term mapping has changed from per-CPU to per-thread. kmap_atomic()
disable preemption, while kmap_local_*() only disable migration.
There is no need to disable preemption in several kamp_atomic places used
in fuse.
Link: https://lwn.net/Articles/836144/
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add missing inode lock annotatation; found by syzbot.
Reported-and-tested-by: syzbot+9f747458f5990eaa8d43@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fuse ->release() is otherwise asynchronous for the reason that it can
happen in contexts unrelated to close/munmap.
Inode is already written back from fuse_flush(). Add it to
fuse_vma_close() as well to make sure inode dirtying from mmaps also get
written out before the file is released.
Also add error handling.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In writeback cache mode mtime/ctime updates are cached, and flushed to the
server using the ->write_inode() callback.
Closing the file will result in a dirty inode being immediately written,
but in other cases the inode can remain dirty after all references are
dropped. This result in the inode being written back from reclaim, which
can deadlock on a regular allocation while the request is being served.
The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because
serving a request involves unrelated userspace process(es).
Instead do the same as for dirty pages: make sure the inode is written
before the last reference is gone.
- fallocate(2)/copy_file_range(2): these call file_update_time() or
file_modified(), so flush the inode before returning from the call
- unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so
flush the ctime directly from this helper
Reported-by: chenguanyou <chenguanyou@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Get rid of the indirections and just provide a sync_bdevs
helper for the generic sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use sync_blockdev_nowait instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use sync_blockdev_nowait instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use sync_blockdev instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead offer a new sync_blockdev_nowait helper for the !wait case.
This new helper is exported as it will grow modular callers in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no clear benefit in having this helper vs just open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call the ->get_unique_id method to query the SCSI identifiers. This can
use the cached VPD page in the sd driver instead of sending a command
on every LAYOUTGET. It will also allow to support NVMe based volumes
if the draft for that ever takes off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove a redundant call in nfs_updatepage(). nfs_writepage_setup() will
have already called nfs_mark_request_dirty() on success.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
