| Age | Commit message (Collapse) | Author |
|---|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull xfs fixes from Chandan Babu:
- Allow stripe unit/width value passed via mount option to be written
over existing values in the super block
- Do not set current->journal_info to avoid its value from being miused
by another filesystem context
* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't use current->journal_info
xfs: allow sunit mount option to repair bad primary sb stripe values
|
|
Pull smb client fixes from Steve French:
- Add missing trace point (noticed when debugging the recent mknod LSM
regression)
- fscache fix
* tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix duplicate fscache cookie warnings
smb3: add trace event for mknod
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address three recently introduced regressions
* tag 'nfsd-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: CREATE_SESSION must never cache NFS4ERR_DELAY replies
SUNRPC: Revert 561141dd494382217bace4d1a51d08168420eace
nfsd: Fix error cleanup path in nfsd_rename()
|
|
9p is a remote network protocol, and it doesn't support asynchronous
notifications from the server. Ensure that we don't hand out any leases
since we can't guarantee they'll be broken when a file's contents
change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
I'm not sure why this check was ever here. After updating to 6.6 I
suddenly found caching had been turned on by default and neither
cache=none nor the new directio would turn it off. After walking through
the new code very manually I realized that it's because the caching has
to be, in effect, turned off explicitly by setting P9L_DIRECT and
whenever a file has a flag, in my case QTAPPEND, it doesn't get set.
Setting aside QTDIR which seems to ignore the new fid->mode entirely,
the rest of these either should be subject to the same cache rules as
every other QTFILE or perhaps very explicitly not cached in the case of
QTAUTH.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer Sandeep Dhavale to build a healthier community
- Drop experimental warning for FSDAX
* tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add myself as reviewer
erofs: drop experimental warning for FSDAX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"Two of these fix syzbot reported issues, and the other fixes a unused
variable in some configurations"
* tag '9p-fixes-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix uninitialized values during inode evict
fs/9p: remove redundant pointer v9ses
fs/9p: fix uaf in in v9fs_stat2inode_dotl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix race when reading extent buffer and 'uptodate' status is missed
by one thread (introduced in 6.5)
- do additional validation of devices using major:minor numbers
- zoned mode fixes:
- use zone-aware super block access during scrub
- fix use-after-free during device replace (found by KASAN)
- also delete zones that are 100% unusable to reclaim space
- extent unpinning fixes:
- fix extent map leak after error handling
- print correct range in error message
- error code and message updates
* tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race in read_extent_buffer_pages()
btrfs: return accurate error code on open failure in open_fs_devices()
btrfs: zoned: don't skip block groups with 100% zone unusable
btrfs: use btrfs_warn() to log message at btrfs_add_extent_mapping()
btrfs: fix message not properly printing interval when adding extent map
btrfs: fix warning messages not printing interval at unpin_extent_range()
btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache()
btrfs: validate device maj:min during open
btrfs: zoned: fix use-after-free in do_zone_finish()
btrfs: zoned: use zone aware sb location for scrub
|
|
There are one or two cases where CREATE_SESSION returns
NFS4ERR_DELAY in order to force the client to wait a bit and try
CREATE_SESSION again. However, after commit e4469c6cc69b ("NFSD: Fix
the NFSv4.1 CREATE_SESSION operation"), NFSD caches that response in
the CREATE_SESSION slot. Thus, when the client resends the
CREATE_SESSION, the server always returns the cached NFS4ERR_DELAY
response rather than actually executing the request and properly
recording its outcome. This blocks the client from making further
progress.
RFC 8881 Section 15.1.1.3 says:
> If NFS4ERR_DELAY is returned on an operation other than SEQUENCE
> that validly appears as the first operation of a request ... [t]he
> request can be retried in full without modification. In this case
> as well, the replier MUST avoid returning a response containing
> NFS4ERR_DELAY as the response to an initial operation of a request
> solely on the basis of its presence in the reply cache.
Neither the original NFSD code nor the discussion in section 18.36.4
refer explicitly to this important requirement, so I missed it.
Note also that not only must the server not cache NFS4ERR_DELAY, but
it has to not advance the CREATE_SESSION slot sequence number so
that it can properly recognize and accept the client's retry.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Fixes: e4469c6cc69b ("NFSD: Fix the NFSv4.1 CREATE_SESSION operation")
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
fscache emits a lot of duplicate cookie warnings with cifs because the
index key for the fscache cookies does not include everything that the
cifs_find_inode() function does. The latter is used with iget5_locked() to
distinguish between inodes in the local inode cache.
Fix this by adding the creation time and file type to the fscache cookie
key.
Additionally, add a couple of comments to note that if one is changed the
other must be also.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite")
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix selftests to conform to the TAP output format (Muhammad Usama
Anjum)
- Fix NOMMU linux_binprm::exec pointer in auxv (Max Filippov)
- Replace deprecated strncpy usage (Justin Stitt)
- Replace another /bin/sh instance in selftests
* tag 'execve-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt: replace deprecated strncpy
exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack()
selftests/exec: Convert remaining /bin/sh to /bin/bash
selftests/exec: execveat: Improve debug reporting
selftests/exec: recursion-depth: conform test to TAP format output
selftests/exec: load_address: conform test to TAP format output
selftests/exec: binfmt_script: Add the overall result line according to TAP
|
|
Currently a device is only really released once the umount returns to
userspace due to how file closing works. That ultimately could cause
an old umount assumption to be violated that concurrent umount and mount
don't fail. So an exclusively held device with a temporary holder should
be yielded before the filesystem is gone. Add a helper that allows
callers to do that. This also allows us to remove the two holder ops
that Linus wasn't excited about.
Link: https://lore.kernel.org/r/20240326-vfs-bdev-end_holder-v1-1-20af85202918@kernel.org
Fixes: f3a608827d1f ("bdev: open block device as files") # mainline only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add trace points to help debug mknod and mkfifo:
smb3_mknod_done
smb3_mknod_enter
smb3_mknod_err
Example output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mkfifo-6163 [003] ..... 960.425558: smb3_mknod_enter: xid=12 sid=0xb55130f6 tid=0x46e6241c path=\fifo1
mkfifo-6163 [003] ..... 960.432719: smb3_mknod_done: xid=12 sid=0xb55130f6 tid=0x46e6241c
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are reports from tree-checker that detects corrupted nodes,
without any obvious pattern so possibly an overwrite in memory.
After some debugging it turns out there's a race when reading an extent
buffer the uptodate status can be missed.
To prevent concurrent reads for the same extent buffer,
read_extent_buffer_pages() performs these checks:
/* (1) */
if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
return 0;
/* (2) */
if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags))
goto done;
At this point, it seems safe to start the actual read operation. Once
that completes, end_bbio_meta_read() does
/* (3) */
set_extent_buffer_uptodate(eb);
/* (4) */
clear_bit(EXTENT_BUFFER_READING, &eb->bflags);
Normally, this is enough to ensure only one read happens, and all other
callers wait for it to finish before returning. Unfortunately, there is
a racey interleaving:
Thread A | Thread B | Thread C
---------+----------+---------
(1) | |
| (1) |
(2) | |
(3) | |
(4) | |
| (2) |
| | (1)
When this happens, thread B kicks of an unnecessary read. Worse, thread
C will see UPTODATE set and return immediately, while the read from
thread B is still in progress. This race could result in tree-checker
errors like this as the extent buffer is concurrently modified:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
Fix it by testing UPTODATE again after setting the READING bit, and if
it's been set, skip the unnecessary read.
Fixes: d7172f52e993 ("btrfs: use per-buffer locking for extent_buffer reading")
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/f51a6d5d7432455a6a858d51b49ecac183e0bbc9.1706312914.git.wqu@suse.com/
Link: https://lore.kernel.org/linux-btrfs/c7241ea4-fcc6-48d2-98c8-b5ea790d6c89@gmx.com/
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor update of changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.
In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.
Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit f4a9f219411f ("btrfs: do not delete unused block group if it may be
used soon") changed the behaviour of deleting unused block-groups on zoned
filesystems. Starting with this commit, we're using
btrfs_space_info_used() to calculate the number of used bytes in a
space_info. But btrfs_space_info_used() also accounts
btrfs_space_info::bytes_zone_unusable as used bytes.
So if a block group is 100% zone_unusable it is skipped from the deletion
step.
In order not to skip fully zone_unusable block-groups, also check if the
block-group has bytes left that can be used on a zoned filesystem.
Fixes: f4a9f219411f ("btrfs: do not delete unused block group if it may be used soon")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we failed to merge the extent map, which
is unexpected and theoretically should never happen, we use WARN_ONCE() to
log a message which is not great because we don't get information about
which filesystem it relates to in case we have multiple btrfs filesystems
mounted. So change this to use btrfs_warn() and surround the error check
with WARN_ON() so we always get a useful stack trace and the condition is
flagged as "unlikely" since it's not expected to ever happen.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we are unable to merge the existing
extent map, we print a warning message that suggests interval ranges in
the form "[X, Y)", where the first element is the inclusive start offset
of a range and the second element is the exclusive end offset. However
we end up printing the length of the ranges instead of the exclusive end
offsets. So fix this by printing the range end offsets.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_range() we print warning messages that are supposed to
print an interval in the form "[X, Y)", with the first element being an
inclusive start offset and the second element being the exclusive end
offset of a range. However we end up printing the range's length instead
of the range's exclusive end offset, so fix that to avoid having confusing
and non-sense messages in case we hit one of these unexpected scenarios.
Fixes: 00deaf04df35 ("btrfs: log messages at unpin_extent_range() during unexpected cases")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_cache() if we happen to find an extent map with an
unexpected start offset, we jump to the 'out' label and never release the
reference we added to the extent map through the call to
lookup_extent_mapping(), therefore resulting in a leak. So fix this by
moving the free_extent_map() under the 'out' label.
Fixes: c03c89f821e5 ("btrfs: handle errors returned from unpin_extent_cache()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Boris managed to create a device capable of changing its maj:min without
altering its device path.
Only multi-devices can be scanned. A device that gets scanned and remains
in the btrfs kernel cache might end up with an incorrect maj:min.
Despite the temp-fsid feature patch did not introduce this bug, it could
lead to issues if the above multi-device is converted to a single device
with a stale maj:min. Subsequently, attempting to mount the same device
with the correct maj:min might mistake it for another device with the same
fsid, potentially resulting in wrongly auto-enabling the temp-fsid feature.
To address this, this patch validates the device's maj:min at the time of
device open and updates it if it has changed since the last scan.
CC: stable@vger.kernel.org # 6.7+
Fixes: a5b8a5f9f835 ("btrfs: support cloned-device mount capability")
Reported-by: Boris Burkov <boris@bur.io>
Co-developed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Boris Burkov <boris@bur.io>#
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a cached pointer to the chunk_map
from the block group, but on device replace this cached pointer can
contain stale device entries.
The staleness comes from the fact, that btrfs_block_group::physical_map is
not a pointer to a btrfs_chunk_map but a memory copy of it.
Also take the fs_info::dev_replace::rwsem to prevent
btrfs_dev_replace_update_device_in_mapping_tree() from changing the device
underneath us again.
Note: btrfs_dev_replace_update_device_in_mapping_tree() is holding
fs_info::mapping_tree_lock, but as this is a spinning read/write lock we
cannot take it as the call to blkdev_zone_mgmt() requires a memory
allocation which may not sleep.
But btrfs_dev_replace_update_device_in_mapping_tree() is always called with
the fs_info::dev_replace::rwsem held in write mode.
Many thanks to Shinichiro for analyzing the bug.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: stable@vger.kernel.org # 6.8
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Convert the minix filesystem to use the new mount API.
Tested using mount and remount on minix device.
Signed-off-by: Bill O'Donnell <bodonnel@redhat.com>
Link: https://lore.kernel.org/r/20240307163325.998723-1-bodonnel@redhat.com
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the tracefs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[sandeen: forward port to modern kernel, fix remounting]
Link: https://lore.kernel.org/r/536e99d3-345c-448b-adee-a21389d7ab4b@redhat.com
cc: Steven Rostedt <rostedt@goodmis.org>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the debugfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[sandeen: forward port to modern kernel, fix remounting]
Link: https://lore.kernel.org/r/49d1f108-46e3-443f-85a3-6dd730c5d076@redhat.com
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The original mount API conversion inexplicably left out the change
from ->remount_fs to ->reconfigure; do that now.
Fixes: 7ab2fa7693c3 ("vfs: Convert openpromfs to use the new mount API")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/90b968aa-c979-420f-ba37-5acc3391b28f@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the freevxfs filesystem to the new mount API.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/b0d1a423-4b8e-4bc1-a021-a1078aee915f@redhat.com
Tested-by: Krzysztof Błaszkowski <kb@sysmikro.com.pl>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the qnx6 filesystem to use the new mount API.
Mostly untested, since there is no qnx6 fs image readily available.
Testing did include parsing of the mmi_fs option.
Signed-off-by: Bill O'Donnell <bodonnel@redhat.com>
Link: https://lore.kernel.org/r/20240302165714.859504-1-bodonnel@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In kupdate writeback, only expired inode (have been dirty for longer than
dirty_expire_interval) is supposed to be written back. However, kupdate
writeback will writeback non-expired inode left in b_io or b_more_io from
last wb_writeback. As a result, writeback will keep being triggered
unexpected when we keep dirtying pages even dirty memory is under
threshold and inode is not expired. To be more specific:
Assume dirty background threshold is > 1G and dirty_expire_centisecs is
> 60s. When we running fio -size=1G -invalidate=0 -ioengine=libaio
--time_based -runtime=60... (keep dirtying), the writeback will keep
being triggered as following:
wb_workfn
wb_do_writeback
wb_check_background_flush
/*
* Wb dirty background threshold starts at 0 if device was idle and
* grows up when bandwidth of wb is updated. So a background
* writeback is triggered.
*/
wb_over_bg_thresh
/*
* Dirtied inode will be written back and added to b_more_io list
* after slice used up (because we keep dirtying the inode).
*/
wb_writeback
Writeback is triggered per dirty_writeback_centisecs as following:
wb_workfn
wb_do_writeback
wb_check_old_data_flush
/*
* Write back inode left in b_io and b_more_io from last wb_writeback
* even the inode is non-expired and it will be added to b_more_io
* again as slice will be used up (because we keep dirtying the
* inode)
*/
wb_writeback
Fix this by moving non-expired inode to dirty list instead of more io
list for kupdate writeback in requeue_inode.
Test as following:
/* make it more easier to observe the issue */
echo 300000 > /proc/sys/vm/dirty_expire_centisecs
echo 100 > /proc/sys/vm/dirty_writeback_centisecs
/* create a idle device */
mkfs.ext4 -F /dev/vdb
mount /dev/vdb /bdi1/
/* run buffer write with fio */
fio -name test -filename=/bdi1/file -size=800M -ioengine=libaio -bs=4K \
-iodepth=1 -rw=write -direct=0 --time_based -runtime=60 -invalidate=0
Fio result before fix (run three tests):
1360MB/s
1329MB/s
1455MB/s
Fio result after fix (run three tests):
1737MB/s
1729MB/s
1789MB/s
Writeback for non-expired inode is gone as expeted. Observe this with trace
writeback_start and writeback_written as following:
echo 1 > /sys/kernel/debug/tracing/events/writeback/writeback_start/enab
echo 1 > /sys/kernel/debug/tracing/events/writeback/writeback_written/enable
cat /sys/kernel/tracing/trace_pipe
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20240228091958.288260-2-shikemeng@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit adds kernel-doc style comments with complete parameter
descriptions for the function proc_create_net_data_write.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240315073805.77463-1-yang.lee@linux.alibaba.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since both ext4 and overlayfs define the same macro to specify string
parameters that may allow empty values, define it in an header file so
that this helper can be shared.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Link: https://lore.kernel.org/r/20240312104757.27333-1-luis.henriques@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new statx field for (sub)volume identifiers, as implemented by
btrfs and bcachefs.
This includes bcachefs support; we'll definitely want btrfs support as
well.
Link: https://lore.kernel.org/linux-fsdevel/2uvhm6gweyl7iyyp2xpfryvcu2g3padagaeqcbiavjyiis6prl@yjm725bizncq/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240308022914.196982-1-kent.overstreet@linux.dev
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Fix boundary check in punch_hole
* tag 'gfs2-v6.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix invalid metadata access in punch_hole
|
|
If an iget fails due to not being able to retrieve information
from the server then the inode structure is only partially
initialized. When the inode gets evicted, references to
uninitialized structures (like fscache cookies) were being
made.
This patch checks for a bad_inode before doing anything other
than clearing the inode from the cache. Since the inode is
bad, it shouldn't have any state associated with it that needs
to be written back (and there really isn't a way to complete
those anyways).
Reported-by: syzbot+eb83fe1cce5833cd66a0@syzkaller.appspotmail.com
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
syzbot reported an ext4 panic during a page fault where found a
journal handle when it didn't expect to find one. The structure
it tripped over had a value of 'TRAN' in the first entry in the
structure, and that indicates it tripped over a struct xfs_trans
instead of a jbd2 handle.
The reason for this is that the page fault was taken during a
copy-out to a user buffer from an xfs bulkstat operation. XFS uses
an "empty" transaction context for bulkstat to do automated metadata
buffer cleanup, and so the transaction context is valid across the
copyout of the bulkstat info into the user buffer.
We are using empty transaction contexts like this in XFS to reduce
the risk of failing to release objects we reference during the
operation, especially during error handling. Hence we really need to
ensure that we can take page faults from these contexts without
leaving landmines for the code processing the page fault to trip
over.
However, this same behaviour could happen from any other filesystem
that triggers a page fault or any other exception that is handled
on-stack from within a task context that has current->journal_info
set. Having a page fault from some other filesystem bounce into XFS
where we have to run a transaction isn't a bug at all, but the usage
of current->journal_info means that this could result corruption of
the outer task's journal_info structure.
The problem is purely that we now have two different contexts that
now think they own current->journal_info. IOWs, no filesystem can
allow page faults or on-stack exceptions while current->journal_info
is set by the filesystem because the exception processing might use
current->journal_info itself.
If we end up with nested XFS transactions whilst holding an empty
transaction, then it isn't an issue as the outer transaction does
not hold a log reservation. If we ignore the current->journal_info
usage, then the only problem that might occur is a deadlock if the
exception tries to take the same locks the upper context holds.
That, however, is not a problem that setting current->journal_info
would solve, so it's largely an irrelevant concern here.
IOWs, we really only use current->journal_info for a warning check
in xfs_vm_writepages() to ensure we aren't doing writeback from a
transaction context. Writeback might need to do allocation, so it
can need to run transactions itself. Hence it's a debug check to
warn us that we've done something silly, and largely it is not all
that useful.
So let's just remove all the use of current->journal_info in XFS and
get rid of all the potential issues from nested contexts where
current->journal_info might get misused by another filesystem
context.
Reported-by: syzbot+cdee56dbcdf0096ef605@syzkaller.appspotmail.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
If a filesystem has a busted stripe alignment configuration on disk
(e.g. because broken RAID firmware told mkfs that swidth was smaller
than sunit), then the filesystem will refuse to mount due to the
stripe validation failing. This failure is triggering during distro
upgrades from old kernels lacking this check to newer kernels with
this check, and currently the only way to fix it is with offline
xfs_db surgery.
This runtime validity checking occurs when we read the superblock
for the first time and causes the mount to fail immediately. This
prevents the rewrite of stripe unit/width via
mount options that occurs later in the mount process. Hence there is
no way to recover this situation without resorting to offline xfs_db
rewrite of the values.
However, we parse the mount options long before we read the
superblock, and we know if the mount has been asked to re-write the
stripe alignment configuration when we are reading the superblock
and verifying it for the first time. Hence we can conditionally
ignore stripe verification failures if the mount options specified
will correct the issue.
We validate that the new stripe unit/width are valid before we
overwrite the superblock values, so we can ignore the invalid config
at verification and fail the mount later if the new values are not
valid. This, at least, gives users the chance of correcting the
issue after a kernel upgrade without having to resort to xfs-db
hacks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
As EXT4/XFS filesystems, FSDAX functionality is considered to be stable.
Let's drop this warning.
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240325005116.106351-1-hsiangkao@linux.alibaba.com
|
|
Pointer v9ses is being assigned the value from the return of inlined
function v9fs_inode2v9ses (which just returns inode->i_sb->s_fs_info).
The pointer is not used after the assignment, so the variable is
redundant and can be removed.
Cleans up clang scan warnings such as:
fs/9p/vfs_inode_dotl.c:300:28: warning: variable 'v9ses' set but not
used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
The incorrect logical order of accessing the st object code in v9fs_fid_iget_dotl
is causing this uaf.
Fixes: 724a08450f74 ("fs/9p: simplify iget to remove unnecessary paths")
Reported-and-tested-by: syzbot+7a3d75905ea1a830dbe5@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
Pull ceph updates from Ilya Dryomov:
"A patch to minimize blockage when processing very large batches of
dirty caps and two fixes to better handle EOF in the face of multiple
clients performing reads and size-extending writes at the same time"
* tag 'ceph-for-6.9-rc1' of https://github.com/ceph/ceph-client:
ceph: set correct cap mask for getattr request for read
ceph: stop copying to iter at EOF on sync reads
ceph: remove SLAB_MEM_SPREAD flag usage
ceph: break the check delayed cap loop every 5s
|
|
Pull xfs fixes from Chandan Babu:
- Fix invalid pointer dereference by initializing xmbuf before
tracepoint function is invoked
- Use memalloc_nofs_save() when inserting into quota radix tree
* tag 'xfs-6.9-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: quota radix tree allocations need to be NOFS on insert
xfs: fix dev_t usage in xmbuf tracepoints
|
|
Commit a8b0026847b8 ("rename(): avoid a deadlock in the case of parents
having no common ancestor") added an error bail out path. However this
path does not drop the remount protection that has been acquired. Fix
the cleanup path to properly drop the remount protection.
Fixes: a8b0026847b8 ("rename(): avoid a deadlock in the case of parents having no common ancestor")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
There is a _nearly_ identical implementation of fill_psinfo present in
binfmt_elf.c -- except that one uses get_task_comm over strncpy(). Let's
mirror that in binfmt_elf_fdpic.c
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240321-strncpy-fs-binfmt_elf_fdpic-c-v2-1-0b6daec6cc56@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Various get_inode_info_fixes
- Fix for querying xattrs of cached dirs
- Four minor cleanup fixes (including adding some header corrections
and a missing flag)
- Performance improvement for deferred close
- Two query interface fixes
* tag '6.9-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb311: additional compression flag defined in updated protocol spec
smb311: correct incorrect offset field in compression header
cifs: Move some extern decls from .c files to .h
cifs: remove redundant variable assignment
cifs: fixes for get_inode_info
cifs: open_cached_dir(): add FILE_READ_EA to desired access
cifs: reduce warning log level for server not advertising interfaces
cifs: make sure server interfaces are requested only for SMB3+
cifs: defer close file handles having RH lease
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Add Zhihao Cheng as reviewer
- Attach via device tree
- Add NVMEM layer
- Various fastmap related fixes
UBIFS:
- Add Zhihao Cheng as reviewer
- Convert to folios
- Various fixes (memory leaks in error paths, function prototypes)"
* tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits)
mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems
mtd: ubi: provide NVMEM layer over UBI volumes
mtd: ubi: populate ubi volume fwnode
mtd: ubi: introduce pre-removal notification for UBI volumes
mtd: ubi: attach from device tree
mtd: ubi: block: use notifier to create ubiblock from parameter
dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
dt-bindings: mtd: add basic bindings for UBI
ubifs: Queue up space reservation tasks if retrying many times
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed
ubi: Correct the number of PEBs after a volume resize failure
ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130
ubi: correct the calculation of fastmap size
ubifs: Remove unreachable code in dbg_check_ltab_lnum
ubifs: fix function pointer cast warnings
ubifs: fix sort function prototype
ubi: Check for too small LEB size in VTBL code
MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer
ubifs: Convert populate_page() to take a folio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
|
|
In NOMMU kernel the value of linux_binprm::p is the offset inside the
temporary program arguments array maintained in separate pages in the
linux_binprm::page. linux_binprm::exec being a copy of linux_binprm::p
thus must be adjusted when that array is copied to the user stack.
Without that adjustment the value passed by the NOMMU kernel to the ELF
program in the AT_EXECFN entry of the aux array doesn't make any sense
and it may break programs that try to access memory pointed to by that
entry.
Adjust linux_binprm::exec before the successful return from the
transfer_args_to_stack().
Cc: <stable@vger.kernel.org>
Fixes: b6a2fea39318 ("mm: variable length argument support")
Fixes: 5edc2a5123a7 ("binfmt_elf_fdpic: wire up AT_EXECFD, AT_EXECFN, AT_SECURE")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20240320182607.1472887-1-jcmvbkbc@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
