| Age | Commit message (Collapse) | Author |
|---|
|
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9eab07e ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.
For example, when we have:
vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)
Then someone unregisters uffd on range (5-9), it should logically become:
vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)
But with current code we'll have:
vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)
This patch allows such merge to happen correctly before ioctl returns.
This behavior seems to have existed since the 1st day of uffd. Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it. Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).
Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/uffd: Fix vma merge/split", v2.
This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.
Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis. The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.
Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.
Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].
[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e
This patch (of 2):
It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:
https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
It's possible that "start" is contained within vma but not clamped to its
start. We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev.
As we loop, each subsequent VMA will be clamped to the start.
This patch will eliminate the report and make sure vma_merge() calls will
become legal again.
One thing to mention is that the "Fixes: 29417d292bd0" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6daf104. Commit 29417d292bd0 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.
Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6daf104 ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.
This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.
Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().
Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In gfs2_file_buffered_write(), we currently jump from the second call of
function should_fault_in_pages() to above the first call, so
should_fault_in_pages() is getting called twice in a row, causing it to
accidentally fall back to single-page writes rather than trying the more
efficient multi-page writes first.
Fix that by moving the retry label to the correct place, behind the
first call to should_fault_in_pages().
Fixes: e1fa9ea85ce8 ("gfs2: Stop using glock holder auto-demotion for now")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A more fixes and regression fixes:
- in subpage mode, fix crash when repairing metadata at the end of
a stripe
- properly enable async discard when remounting from read-only to
read-write
- scrub regression fixes:
- respect read-only scrub when attempting to do a repair
- fix reporting of found errors, the stats don't get properly
accounted after a stripe repair"
* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: also report errors hit during the initial read
btrfs: scrub: respect the read-only flag during repair
btrfs: properly enable async discard when switching from RO->RW
btrfs: subpage: fix a crash in metadata repair path
|
|
Modified nfsd4_encode_open to encode the op_recall flag properly
for OPEN result with write delegation granted.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
|
|
The below-mentioned patch was intended to simplify refcounting on the
svc_serv used by locked. The goal was to only ever have a single
reference from the single thread. To that end we dropped a call to
lockd_start_svc() (except when creating thread) which would take a
reference, and dropped the svc_put(serv) that would drop that reference.
Unfortunately we didn't also remove the svc_get() from
lockd_create_svc() in the case where the svc_serv already existed.
So after the patch:
- on the first call the svc_serv was allocated and the one reference
was given to the thread, so there are no extra references
- on subsequent calls svc_get() was called so there is now an extra
reference.
This is clearly not consistent.
The inconsistency is also clear in the current code in lockd_get()
takes *two* references, one on nlmsvc_serv and one by incrementing
nlmsvc_users. This clearly does not match lockd_put().
So: drop that svc_get() from lockd_get() (which used to be in
lockd_create_svc().
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/linux-nfs/ZHsI%2FH16VX9kJQX1@shredder/T/#u
Fixes: b73a2972041b ("lockd: move lockd_start_svc() call into lockd_create_svc()")
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no real need to store the open mode in the super_block now.
It is only used by f2fs, which can easily recalculate it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to return the open flags for blkdev_get_by* for passed in
super block flags instead of open coding the logic in many places.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Passing a holder to blkdev_get_by_path when FMODE_EXCL isn't set doesn't
make sense, so pass NULL instead and remove the holder argument from the
call chains the only end up in non-FMODE_EXCL blkdev_get_by_path calls.
Exclusive mode for device scanning is not used since commit 50d281fc434c
("btrfs: scan device in non-exclusive mode")".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20230608110258.189493-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag"), file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Remove .direct_IO from gfs2_aops and set FMODE_CAN_ODIRECT in
gfs2_open_common for regular files that do not use data journalling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
fsnotify_open() hook is called only from high level system calls
context and not called for the very many helpers to open files.
This may makes sense for many of the special file open cases, but it is
inconsistent with fsnotify_close() hook that is called for every last
fput() of on a file object with FMODE_OPENED.
As a result, it is possible to observe ACCESS, MODIFY and CLOSE events
without ever observing an OPEN event.
Fix this inconsistency by replacing all the fsnotify_open() hooks with
a single hook inside do_dentry_open().
If there are special cases that would like to opt-out of the possible
overhead of fsnotify() call in fsnotify_open(), they would probably also
want to avoid the overhead of fsnotify() call in the rest of the fsnotify
hooks, so they should be opening that file with the __FMODE_NONOTIFY flag.
However, in the majority of those cases, the s_fsnotify_connectors
optimization in fsnotify_parent() would be sufficient to avoid the
overhead of fsnotify() call anyway.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230611122429.1499617-1-amir73il@gmail.com>
|
|
The current implementation of max_credits on the client does
not work because the CreditRequest logic for several commands
does not take max_credits into account.
Still, we can end up asking the server for more credits, depending
on the number of credits in flight. For this, we need to
limit the credits while parsing the responses too.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
iface_cmp used to simply do a memcmp of the two
provided struct sockaddrs. The comparison needs to do more
based on the address family. Similar logic was already
present in cifs_match_ipaddr. Doing something similar now.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The virtio driver for Linux guests will not set a link speed to its
paravirtualized NICs. This will be seen as -1 in the ethernet layer, and
when some servers (e.g. samba) fetches it, it's converted to an unsigned
value (and multiplied by 1000 * 1000), so in client side we end up with:
1) Speed: 4294967295000000 bps
in DebugData.
This patch introduces a helper that returns a speed string (in Mbps or
Gbps) if interface speed is valid (>= SPEED_10 and <= SPEED_800000), or
"Unknown" otherwise.
The reason to not change the value in iface->speed is because we don't
know the real speed of the HW backing the server NIC, so let's keep
considering these as the fastest NICs available.
Also print "Capabilities: None" when the interface doesn't support any.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Output of /proc/fs/cifs/DebugData shows only the per-connection
counter for the number of credits of regular type. i.e. the
credits reserved for echo and oplocks are not displayed.
There have been situations recently where having this info
would have been useful. This change prints the credit counters
of all three types: regular, echo, oplocks.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The ordering of status checks at the beginning of
cifs_tree_connect is wrong. As a result, a tcon
which is good may stay marked as needing reconnect
infinitely.
Fixes: 2f0e4f034220 ("cifs: check only tcon status on tcon related functions")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Because do_gettimeofday has been removed and replaced by ktime_get_real_ts64,
So just remove the comment as it's not needed now.
Signed-off-by: 鑫华 <jixianghua@xfusion.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
nfsd calls fh_getattr to get the latest inode attrs for pre/post-op
info. In the event that fh_getattr fails, it resorts to scraping cached
values out of the inode directly.
Since these attributes are optional, we can just skip providing them
altogether when this happens.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Neil Brown <neilb@suse.de>
|
|
nfsd_readv()'s consumers now use nfsd_iter_read().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.
nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.
Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Accrue the following benefits:
a) Deduplicate this common bit of code.
b) Don't prepare rq_vec for NFSv2 and NFSv3 spliced reads, which
don't use rq_vec. This is already the case for
nfsd4_encode_read().
c) Eventually, converting NFSD's read path to use a bvec iterator
will be simpler.
In the next patch, nfsd_iter_read() will replace nfsd_readv() for
all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A GETATTR with a large result can advance xdr->page_ptr without
updating rq_next_page. If a splice READ follows that GETATTR in the
COMPOUND, nfsd_splice_actor can start splicing at the wrong page.
I've also seen READLINK and READDIR leave rq_next_page in an
unmodified state.
There are potentially a myriad of combinations like this, so play it
safe: move the rq_next_page update to nfsd4_encode_operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 15b23ef5d348 ("nfsd4: fix corruption of NFSv4 read data")
encountered exactly the same issue: after a splice read, a
filesystem-owned page is left in rq_pages[]; the symptoms are the
same as described there.
If the computed number of pages in nfsd4_encode_splice_read() is not
exactly the same as the actual number of pages that were consumed by
nfsd_splice_actor() (say, because of a bug) then hilarity ensues.
Instead of recomputing the page offset based on the size of the
payload, use rq_next_page, which is already properly updated by
nfsd_splice_actor(), to cause svc_rqst_release_pages() to operate
correctly in every instance.
This is a defensive change since we believe that after commit
27c934dd8832 ("nfsd: don't replace page in rq_pages if it's a
continuation of last page") has been applied, there are no known
opportunities for nfsd_splice_actor() to screw up. So I'm not
marking it for stable backport.
Reported-by: Andy Zlotek <andy.zlotek@oracle.com>
Suggested-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
|
|
After commit 6dc8bc0fb300 ("ocfs2: switch to iter_file_splice_write()"),
ocfs2 has switched from ocfs2_file_splice_write() to
iter_file_splice_write(), so cleanup the corresponding trace event as
well.
Link: https://lkml.kernel.org/r/20230528132033.217664-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now in ocfs2_local_free_info(), it returns 0 even if it actually fails.
Though it doesn't cause any real problem since the only caller
dquot_disable() ignores the return value, we'd better return correct as it
is.
Link: https://lkml.kernel.org/r/20230528132033.217664-1-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before commit 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block
usage to BIO"), compressed blocks read by squashfs were cached in the page
cache, but that is not the case after that commit. That has lead to
squashfs having to re-read a lot of sectors from disk/flash.
For example, the first sectors of every metadata block need to be read
twice from the disk. Once partially to read the length, and a second time
to read the block itself. Also, in linear reads of large files, the last
sectors of one data block are re-read from disk when reading the next data
block, since the compressed blocks are of variable sizes and not aligned
to device blocks. This extra I/O results in a degrade in read performance
of, for example, ~16% in one scenario on my ARM platform using squashfs
with dm-verity and NAND.
Since the decompressed data is cached in the page cache or squashfs'
internal metadata and fragment caches, caching _all_ compressed pages
would lead to a lot of double caching and is undesirable. But make the
code cache any disk blocks which were only partially requested, since
these are the ones likely to include data which is needed by other file
system blocks. This restores read performance in my test scenario.
The compressed block caching is only applied when the disk block size is
equal to the page size, to avoid having to deal with caching sub-page
reads.
[akpm@linux-foundation.org: fs/squashfs/block.c needs linux/pagemap.h]
[vincent.whitchurch@axis.com: fix page update race]
Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-1-d54a7fa23e7b@axis.com
[vincent.whitchurch@axis.com: fix page indices]
Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-2-d54a7fa23e7b@axis.com
[akpm@linux-foundation.org: fix layout, per hch]
Link: https://lkml.kernel.org/r/20230510-squashfs-cache-v4-1-3bd394e1ee71@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Squashfs has stopped using buffers heads in 93e72b3c612adcaca1
("squashfs: migrate from ll_rw_block usage to BIO").
Link: https://lkml.kernel.org/r/20230517071622.245151-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Link: https://lkml.kernel.org/r/20230510212457.3491385-1-azeemshaikh38@gmail.com
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the generic direct_write_fallback helper instead of duplicating the
logic.
Link: https://lkml.kernel.org/r/20230601145904.1385409-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pos is always equal to iocb->ki_pos, and mapping is always equal to
iocb->ki_filp->f_mapping.
Link: https://lkml.kernel.org/r/20230601145904.1385409-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both callers of fuse_perform_write need to updated ki_pos, move it into
common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a helper dealing with handling the syncing of a buffered write
fallback for direct I/O.
Link: https://lkml.kernel.org/r/20230601145904.1385409-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the common helpers for direct I/O page invalidation instead of open
coding the logic. This leads to a slight reordering of checks in
__iomap_dio_rw to keep the logic straight.
Link: https://lkml.kernel.org/r/20230601145904.1385409-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers of iomap_file_buffered_write need to updated ki_pos, move it
into common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a helper to invalidate page cache after a dio write.
Link: https://lkml.kernel.org/r/20230601145904.1385409-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers of generic_perform_write need to updated ki_pos, move it into
common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the ki_pos update down a bit to prepare for a better common helper
that invalidates pages based of an iocb.
Link: https://lkml.kernel.org/r/20230601145904.1385409-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "cleanup the filemap / direct I/O interaction", v4.
This series cleans up some of the generic write helper calling conventions
and the page cache writeback / invalidation for direct I/O. This is a
spinoff from the no-bufferhead kernel project, for which we'll want to an
use iomap based buffered write path in the block layer.
This patch (of 12):
The last user of current->backing_dev_info disappeared in commit
b9b1335e6403 ("remove bdi_congested() and wb_congested() and related
functions"). Remove the field and all assignments to it.
Link: https://lkml.kernel.org/r/20230601145904.1385409-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230601145904.1385409-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply look up the
VMA directly. In particular:-
- __update_ref_ctr() looked up the VMA but did nothing with it so we simply
remove it.
- __access_remote_vm() was already using vma_lookup() when the original
lookup failed so by doing the lookup directly this also de-duplicates the
code.
We are able to perform these VMA operations as we already hold the
mmap_lock in order to be able to call get_user_pages_remote().
As part of this work we add get_user_page_vma_remote() which abstracts the
VMA lookup, error handling and decrementing the page reference count should
the VMA lookup fail.
This forms part of a broader set of patches intended to eliminate the vmas
parameter altogether.
[akpm@linux-foundation.org: avoid passing NULL to PTR_ERR]
Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64)
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pagewalk in pagemap_read reads one PTE past the end of the requested
range, and stops when the buffer runs out of space. While it produces
the right result, the extra read is unnecessary and less performant.
I timed the following command before and after this patch:
dd count=100000 if=/proc/self/pagemap of=/dev/null
The results are consistently within 0.001s across 5 runs.
Before:
100000+0 records in
100000+0 records out
51200000 bytes (51 MB) copied, 0.0763159 s, 671 MB/s
real 0m0.078s
user 0m0.012s
sys 0m0.065s
After:
100000+0 records in
100000+0 records out
51200000 bytes (51 MB) copied, 0.0487928 s, 1.0 GB/s
real 0m0.050s
user 0m0.011s
sys 0m0.039s
Link: https://lkml.kernel.org/r/20230515172608.3558391-1-yuanchu@google.com
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calling hugetlb_set_vma_policy() later avoids setting the vma policy
and then dropping it on a page cache hit.
Link: https://lkml.kernel.org/r/20230502235622.3652586-1-ackerleytng@google.com
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "cgroup: eliminate atomic rstat flushing", v5.
A previous patch series [1] changed most atomic rstat flushing contexts to
become non-atomic. This was done to avoid an expensive operation that
scales with # cgroups and # cpus to happen with irqs disabled and
scheduling not permitted. There were two remaining atomic flushing
contexts after that series. This series tries to eliminate them as well,
eliminating atomic rstat flushing completely.
The two remaining atomic flushing contexts are:
(a) wb_over_bg_thresh()->mem_cgroup_wb_stats()
(b) mem_cgroup_threshold()->mem_cgroup_usage()
For (a), flushing needs to be atomic as wb_writeback() calls
wb_over_bg_thresh() with a spinlock held. However, it seems like the call
to wb_over_bg_thresh() doesn't need to be protected by that spinlock, so
this series proposes a refactoring that moves the call outside the lock
criticial section and makes the stats flushing in mem_cgroup_wb_stats()
non-atomic.
For (b), flushing needs to be atomic as mem_cgroup_threshold() is called
with irqs disabled. We only flush the stats when calculating the root
usage, as it is approximated as the sum of some memcg stats (file, anon,
and optionally swap) instead of the conventional page counter. This
series proposes changing this calculation to use the global stats instead,
eliminating the need for a memcg stat flush.
After these 2 contexts are eliminated, we no longer need
mem_cgroup_flush_stats_atomic() or cgroup_rstat_flush_atomic(). We can
remove them and simplify the code.
[1] https://lore.kernel.org/linux-mm/20230330191801.1967435-1-yosryahmed@google.com/
This patch (of 5):
wb_over_bg_thresh() calls mem_cgroup_wb_stats() which invokes an rstat
flush, which can be expensive on large systems. Currently,
wb_writeback() calls wb_over_bg_thresh() within a lock section, so we
have to do the rstat flush atomically. On systems with a lot of
cpus and/or cgroups, this can cause us to disable irqs for a long time,
potentially causing problems.
Move the call to wb_over_bg_thresh() outside the lock section in
preparation to make the rstat flush in mem_cgroup_wb_stats() non-atomic.
The list_empty(&wb->work_list) check should be okay outside the lock
section of wb->list_lock as it is protected by a separate lock
(wb->work_lock), and wb_over_bg_thresh() doesn't seem like it is
modifying any of wb->b_* lists the wb->list_lock is protecting.
Also, the loop seems to be already releasing and reacquring the
lock, so this refactoring looks safe.
Link: https://lkml.kernel.org/r/20230421174020.2994750-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230421174020.2994750-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which breaks remounting r/w file systems that
have the quota feature enabled"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: only check dquot_initialize_needed() when debugging
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
|
|
splice_direct_to_actor() doesn't manage SPLICE_F_MORE correctly[1] - and,
as a result, it incorrectly signals/fails to signal MSG_MORE when splicing
to a socket. The problem I'm seeing happens when a short splice occurs
because we got a short read due to hitting the EOF on a file: as the length
read (read_len) is less than the remaining size to be spliced (len),
SPLICE_F_MORE (and thus MSG_MORE) is set.
The issue is that, for the moment, we have no way to know *why* the short
read occurred and so can't make a good decision on whether we *should* keep
MSG_MORE set.
MSG_SENDPAGE_NOTLAST was added to work around this, but that is also set
incorrectly under some circumstances - for example if a short read fills a
single pipe_buffer, but the next read would return more (seqfile can do
this).
This was observed with the multi_chunk_sendfile tests in the tls kselftest
program. Some of those tests would hang and time out when the last chunk
of file was less than the sendfile request size:
build/kselftest/net/tls -r tls.12_aes_gcm.multi_chunk_sendfile
This has been observed before[2] and worked around in AF_TLS[3].
Fix this by making splice_direct_to_actor() always signal SPLICE_F_MORE if
we haven't yet hit the requested operation size. SPLICE_F_MORE remains
signalled if the user passed it in to splice() but otherwise gets cleared
when we've read sufficient data to fulfill the request.
If, however, we get a premature EOF from ->splice_read(), have sent at
least one byte and SPLICE_F_MORE was not set by the caller, ->splice_eof()
will be invoked.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: David Hildenbrand <david@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/499791.1685485603@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/ [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a [3]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
