| Age | Commit message (Collapse) | Author |
|---|
|
Since xfs_qm_scall_trunc_qfiles can take a bitset of quota types that we
want to truncate, change the flags argument to take XFS_QMOPT_[UGP}QUOTA
so that the next patch can start to deprecate XFS_DQ_*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
|
|
While loading dquot records off disk, make sure that the quota type
flags are the same between the incore dquot and the ondisk dquot.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
|
|
xfs_trans_dqresv is the function that we use to make reservations
against resource quotas. Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.
For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.
Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.
Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In commit 8d3d7e2b35ea, we changed xfs_qm_dqpurge to bail out if we
can't lock the dquot buf to flush the dquot. This prevents the AIL from
blocking on the dquot, but it also forgets to clear the FREEING flag on
its way out. A subsequent purge attempt will see the FREEING flag is
set and bail out, which leads to dqpurge_all failing to purge all the
dquots.
(copy-pasting from Dave Chinner's identical patch)
This was found by inspection after having xfs/305 hang 1 in ~50
iterations in a quotaoff operation:
[ 8872.301115] xfs_quota D13888 92262 91813 0x00004002
[ 8872.302538] Call Trace:
[ 8872.303193] __schedule+0x2d2/0x780
[ 8872.304108] ? do_raw_spin_unlock+0x57/0xd0
[ 8872.305198] schedule+0x6e/0xe0
[ 8872.306021] schedule_timeout+0x14d/0x300
[ 8872.307060] ? __next_timer_interrupt+0xe0/0xe0
[ 8872.308231] ? xfs_qm_dqusage_adjust+0x200/0x200
[ 8872.309422] schedule_timeout_uninterruptible+0x2a/0x30
[ 8872.310759] xfs_qm_dquot_walk.isra.0+0x15a/0x1b0
[ 8872.311971] xfs_qm_dqpurge_all+0x7f/0x90
[ 8872.313022] xfs_qm_scall_quotaoff+0x18d/0x2b0
[ 8872.314163] xfs_quota_disable+0x3a/0x60
[ 8872.315179] kernel_quotactl+0x7e2/0x8d0
[ 8872.316196] ? __do_sys_newstat+0x51/0x80
[ 8872.317238] __x64_sys_quotactl+0x1e/0x30
[ 8872.318266] do_syscall_64+0x46/0x90
[ 8872.319193] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 8872.320490] RIP: 0033:0x7f46b5490f2a
[ 8872.321414] Code: Bad RIP value.
Returning -EAGAIN from xfs_qm_dqpurge() without clearing the
XFS_DQ_FREEING flag means the xfs_qm_dqpurge_all() code can never
free the dquot, and we loop forever waiting for the XFS_DQ_FREEING
flag to go away on the dquot that leaked it via -EAGAIN.
Fixes: 8d3d7e2b35ea ("xfs: trylock underlying buffer on dquot flush")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The block reservation calculation for inode allocation is supposed
to consist of the blocks required for the inode chunk plus
(maxlevels-1) of the inode btree multiplied by the number of inode
btrees in the fs (2 when finobt is enabled, 1 otherwise).
Instead, the macro returns (ialloc_blocks + 2) due to a precedence
error in the calculation logic. This leads to block reservation
overruns via generic/531 on small block filesystems with finobt
enabled. Add braces to fix the calculation and reserve the
appropriate number of blocks.
Fixes: 9d43b180af67 ("xfs: update inode allocation/free transaction reservations for finobt")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
xfsaild is racy with respect to transaction abort and shutdown in
that the task can idle or exit with an empty AIL but buffers still
on the delwri queue. This was partly addressed by cancelling the
delwri queue before the task exits to prevent memory leaks, but it's
also possible for xfsaild to empty and idle with buffers on the
delwri queue. For example, a transaction that pins a buffer that
also happens to sit on the AIL delwri queue will explicitly remove
the associated log item from the AIL if the transaction aborts. The
side effect of this is an unmount hang in xfs_wait_buftarg() as the
associated buffers remain held by the delwri queue indefinitely.
This is reproduced on repeated runs of generic/531 with an fs format
(-mrmapbt=1 -bsize=1k) that happens to also reproduce transaction
aborts.
Update xfsaild to not idle until both the AIL and associated delwri
queue are empty and update the push code to continue delwri queue
submission attempts even when the AIL is empty. This allows the AIL
to eventually release aborted buffers stranded on the delwri queue
when they are unlocked by the associated transaction. This should
have no significant effect on normal runtime behavior because the
xfsaild currently idles only when the AIL is empty and in practice
the AIL is rarely empty with a populated delwri queue. The items
must be AIL resident to land in the queue in the first place and
generally aren't removed until writeback completes.
Note that the pre-existing delwri queue cancel logic in the exit
path is retained because task stop is external, could technically
come at any point, and xfsaild is still responsible to release its
buffer references before it exits.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Passing size to copy_user_dax implies it can copy variable sizes of data
when in fact it calls copy_user_page() which is exactly a page.
We are safe because the only caller uses PAGE_SIZE anyway so just remove
the variable for clarity.
While we are at it change copy_user_dax() to copy_cow_page_dax() to make
it clear it is a singleton helper for this one case not implementing
what dax_iomap_actor() does.
Link: https://lore.kernel.org/r/20200717072056.73134-11-ira.weiny@intel.com
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
Al Viro pointed out that I broke some acl functionality...
* ACLs could not be fully removed
* posix_acl_chmod would be called while the old ACL was still cached
* new mode propagated to orangefs server before ACL.
... when I tried to make sure that modes that got changed as a
result of ACL-sets would be sent back to the orangefs server.
Not wanting to try and change the code without having some cases to
test it with, I began to hunt for setfacl examples that were expressible
in pure mode. Along the way I found examples like the following
which confused me:
user A had a file (/home/A/asdf) with mode 740
user B was in user A's group
user C was not in user A's group
setfacl -m u:C:rwx /home/A/asdf
The above setfacl caused ls -l /home/A/asdf to show a mode of 770,
making it appear that all users in user A's group now had full access
to /home/A/asdf, however, user B still only had read acces. Madness.
Anywho, I finally found that the above (whacky as it is) appears to
be "posixly on purpose" and explained in acl(5):
If the ACL has an ACL_MASK entry, the group permissions correspond
to the permissions of the ACL_MASK entry.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When merging name events, fsids of the two involved events have to
match. Otherwise we could merge events from two different filesystems
and thus effectively loose the second event.
Backporting note: Although the commit cacfb956d46e introducing this bug
was merged for 5.7, the relevant code didn't get used in the end until
7e8283af6ede ("fanotify: report parent fid + name + child fid") which
will be merged with this patch. So there's no need for backporting this.
Fixes: cacfb956d46e ("fanotify: record name info for FAN_DIR_MODIFY event")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The method handle_event() grew a lot of complexity due to the design of
fanotify and merging of ignore masks.
Most backends do not care about this complex functionality, so we can hide
this complexity from them.
Introduce a method handle_inode_event() that serves those backends and
passes a single inode mark and less arguments.
This change converts all backends except fanotify and inotify to use the
simplified handle_inode_event() method. In pricipal, inotify could have
also used the new method, but that would require passing more arguments
on the simple helper (data, data_type, cookie), so we leave it with the
handle_event() method.
Link: https://lore.kernel.org/r/20200722125849.17418-9-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add support for FAN_REPORT_FID | FAN_REPORT_DIR_FID.
Internally, it is implemented as a private case of reporting both
parent and child fids and name, the parent and child fids are recorded
in a variable length fanotify_name_event, but there is no name.
It should be noted that directory modification events are recorded
in fixed size fanotify_fid_event when not reporting name, just like
with group flags FAN_REPORT_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-23-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For a group with fanotify_init() flag FAN_REPORT_DFID_NAME, the parent
fid and name are reported for events on non-directory objects with an
info record of type FAN_EVENT_INFO_TYPE_DFID_NAME.
If the group also has the init flag FAN_REPORT_FID, the child fid
is also reported with another info record that follows the first info
record. The second info record is the same info record that would have
been reported to a group with only FAN_REPORT_FID flag.
When the child fid needs to be recorded, the variable size struct
fanotify_name_event is preallocated with enough space to store the
child fh between the dir fh and the name.
Link: https://lore.kernel.org/r/20200716084230.30611-22-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Introduce a new fanotify_init() flag FAN_REPORT_NAME. It requires the
flag FAN_REPORT_DIR_FID and there is a constant for setting both flags
named FAN_REPORT_DFID_NAME.
For a group with flag FAN_REPORT_NAME, the parent fid and name are
reported for directory entry modification events (create/detete/move)
and for events on non-directory objects.
Events on directories themselves are reported with their own fid and
"." as the name.
The parent fid and name are reported with an info record of type
FAN_EVENT_INFO_TYPE_DFID_NAME, similar to the way that parent fid is
reported with into type FAN_EVENT_INFO_TYPE_DFID, but with an appended
null terminated name string.
Link: https://lore.kernel.org/r/20200716084230.30611-21-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
In a group with flag FAN_REPORT_DIR_FID, when adding an inode mark with
FAN_EVENT_ON_CHILD, events on non-directory children are reported with
the fid of the parent.
When adding a filesystem or mount mark or mark on a non-dir inode, we
want to report events that are "possible on child" (e.g. open/close)
also with fid of the parent, as if the victim inode's parent is
interested in events "on child".
Some events, currently only FAN_MOVE_SELF, should be reported to a
sb/mount/non-dir mark with parent fid even though they are not
reported to a watching parent.
To get the desired behavior we set the flag FAN_EVENT_ON_CHILD on
all the sb/mount/non-dir mark masks in a group with FAN_REPORT_DIR_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-20-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For now, the flag is mutually exclusive with FAN_REPORT_FID.
Events include a single info record of type FAN_EVENT_INFO_TYPE_DFID
with a directory file handle.
For now, events are only reported for:
- Directory modification events
- Events on children of a watching directory
- Events on directory objects
Soon, we will add support for reporting the parent directory fid
for events on non-directories with filesystem/mount mark and
support for reporting both parent directory fid and child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-19-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Similar to events "on child" to watching directory, send event
with parent/name info if sb/mount/non-dir marks are interested in
parent/name info.
The FS_EVENT_ON_CHILD flag can be set on sb/mount/non-dir marks to specify
interest in parent/name info for events on non-directory inodes.
Events on "orphan" children (disconnected dentries) are sent without
parent/name info.
Events on directories are sent with parent/name info only if the parent
directory is watching.
After this change, even groups that do not subscribe to events on
children could get an event with mark iterator type TYPE_CHILD and
without mark iterator type TYPE_INODE if fanotify has marks on the same
objects.
dnotify and inotify event handlers can already cope with that situation.
audit does not subscribe to events that are possible on child, so won't
get to this situation. nfsd does not access the marks iterator from its
event handler at the moment, so it is not affected.
This is a bit too fragile, so we should prepare all groups to cope with
mark type TYPE_CHILD preferably using a generic helper.
Link: https://lore.kernel.org/r/20200716084230.30611-16-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FS_EVENT_ON_CHILD has currently no meaning for non-dir inode marks. In
the following patches we want to use that bit to mean that mark's
notification group cares about parent and name information. So stop
setting FS_EVENT_ON_CHILD for non-dir marks.
Link: https://lore.kernel.org/r/20200722125849.17418-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The arguments of fsnotify() are overloaded and mean different things
for different event types.
Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child. Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.
Document the new fsnotify() function argumenets.
Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Simple helper to consolidate biolerplate code.
Link: https://lore.kernel.org/r/20200722125849.17418-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Instead of calling fsnotify() twice, once with parent inode and once
with child inode, if event should be sent to parent inode, send it
with both parent and child inodes marks in object type iterator and call
the backend handle_event() callback only once.
The parent inode is assigned to the standard "inode" iterator type and
the child inode is assigned to the special "child" iterator type.
In that case, the bit FS_EVENT_ON_CHILD will be set in the event mask,
the dir argument to handle_event will be the parent inode, the file_name
argument to handle_event is non NULL and refers to the name of the child
and the child inode can be accessed with fsnotify_data_inode().
This will allow fanotify to make decisions based on child or parent's
ignored mask. For example, when a parent is interested in a specific
event on its children, but a specific child wishes to ignore this event,
the event will not be reported. This is not what happens with current
code, but according to man page, it is the expected behavior.
Link: https://lore.kernel.org/r/20200716084230.30611-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fsnotify usually calls inotify_handle_event() once for watching parent
to report event with child's name and once for watching child to report
event without child's name.
Do the same thing with a single callback instead of two callbacks when
marks iterator contains both inode and child entries.
Link: https://lore.kernel.org/r/20200716084230.30611-13-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For some events (e.g. DN_ATTRIB on sub-directory) fsnotify may call
dnotify_handle_event() once for watching parent and once again for
the watching sub-directory.
Do the same thing with a single callback instead of two callbacks when
marks iterator contains both inode and child entries.
Link: https://lore.kernel.org/r/20200716084230.30611-12-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The fanotify_fh struct has an inline buffer of size 12 which is enough
to store the most common local filesystem file handles (e.g. ext4, xfs).
For file handles that do not fit in the inline buffer (e.g. btrfs), an
external buffer is allocated to store the file handle.
When allocating a variable size fanotify_name_event, there is no point
in allocating also an external fh buffer when file handle does not fit
in the inline buffer.
Check required size for encoding fh, preallocate an event buffer
sufficient to contain both file handle and name and store the name after
the file handle.
At this time, when not reporting name in event, we still allocate
the fixed size fanotify_fid_event and an external buffer for large
file handles, but fanotify_alloc_name_event() has already been prepared
to accept a NULL file_name.
Link: https://lore.kernel.org/r/20200716084230.30611-11-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
An fanotify event name is always recorded relative to a dir fh.
Encapsulate the name_len member of fanotify_name_event in a new struct
fanotify_info, which describes the parceling of the variable size
buffer of an fanotify_name_event.
The dir_fh member of fanotify_name_event is renamed to _dir_fh and is not
accessed directly, but via the fanotify_info_dir_fh() accessor.
Although the dir_fh len information is already available in struct
fanotify_fh, we store it also in dif_fh_totlen member of fanotify_info,
including the size of fanotify_fh header, so we know the offset of the
name in the buffer without looking inside the dir_fh.
We also add a file_fh_totlen member to allow packing another file handle
in the variable size buffer after the dir_fh and before the name.
We are going to use that space to store the child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Up to now, fanotify allowed to set the FAN_EVENT_ON_CHILD flag on
sb/mount marks and non-directory inode mask, but the flag was ignored.
Mask out the flag if it is provided by user on sb/mount/non-dir marks
and define it as an implicit flag that cannot be removed by user.
This flag is going to be used internally to request for events with
parent and name info.
Link: https://lore.kernel.org/r/20200716084230.30611-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
So far, all flags that can be set in an fanotify mark mask can be set
explicitly by a call to fanotify_mark(2).
Prepare for defining implicit event flags that cannot be set by user with
fanotify_mark(2), similar to how inotify/dnotify implicitly set the
FS_EVENT_ON_CHILD flag.
Implicit event flags cannot be removed by user and mark gets destroyed
when only implicit event flags remain in the mask.
Link: https://lore.kernel.org/r/20200716084230.30611-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The special event flags (FAN_ONDIR, FAN_EVENT_ON_CHILD) never had
any meaning in ignored mask. Mask them out explicitly.
Link: https://lore.kernel.org/r/20200716084230.30611-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
As preparation for new flags that report fids, define a bit set
of flags for a group reporting fids, currently containing the
only bit FAN_REPORT_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
In fanotify_encode_fh(), both cases of NULL inode and failure to encode
ended up with fh type FILEID_INVALID.
Distiguish the case of NULL inode, by setting fh type to FILEID_ROOT.
This is just a semantic difference at this point.
Remove stale comment and unneeded check from fid event compare helpers.
Link: https://lore.kernel.org/r/20200716084230.30611-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
An event on directory should never be merged with an event on
non-directory regardless of the event struct type.
This change has no visible effect, because currently, with struct
fanotify_path_event, the relevant events will not be merged because
event path of dir will be different than event path of non-dir.
Link: https://lore.kernel.org/r/20200716084230.30611-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
In fanotify_group_event_mask() there is logic in place to make sure we
are not going to handle an event with no type and just FAN_ONDIR flag.
Generalize this logic to any FANOTIFY_EVENT_FLAGS.
There is only one more flag in this group at the moment -
FAN_EVENT_ON_CHILD. We never report it to user, but we do pass it in to
fanotify_alloc_event() when group is reporting fid as indication that
event happened on child. We will have use for this indication later on.
Link: https://lore.kernel.org/r/20200716084230.30611-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
It was never enabled in uapi and its functionality is about to be
superseded by events FAN_CREATE, FAN_DELETE, FAN_MOVE with group
flag FAN_REPORT_NAME.
Keep a place holder variable name_event instead of removing the
name recording code since it will be used by the new events.
Link: https://lore.kernel.org/r/20200708111156.24659-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
similar to how elf coredump is working on architectures that
have regsets, and all architectures with elf-fdpic support *do*
have that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
the only reason to have it open-coded for the first (dumper) thread is
that coredump has a couple of process-wide notes stuck right after the
first (NT_PRSTATUS) note of the first thread. But we don't need to
make the data collection side irregular for the first thread to handle
that - it's only the logics ordering the calls of writenote() that
needs to take care of that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
plain single-linked list is just fine here...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only architecture where we might end up using both is arm,
and there we definitely don't want fdpic-related fields in
elf_prstatus - coredump layout of ELF binaries should not
depend upon having the kernel built with the support of ELF_FDPIC
ones. Just move the fdpic-modified variant into binfmt_elf_fdpic.c
(and call it elf_prstatus_fdpic there)
[name stolen from nico]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two new helpers: given a process and regset, dump into a buffer.
regset_get() takes a buffer and size, regset_get_alloc() takes size
and allocates a buffer.
Return value in both cases is the amount of data actually dumped in
case of success or -E... on error.
In both cases the size is capped by regset->n * regset->size, so
->get() is called with offset 0 and size no more than what regset
expects.
binfmt_elf.c callers of ->get() are switched to using those; the other
caller (copy_regset_to_user()) will need some preparations to switch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The 'inode' argument to handle_event(), sometimes referred to as
'to_tell' is somewhat obsolete.
It is a remnant from the times when a group could only have an inode mark
associated with an event.
We now pass an iter_info array to the callback, with all marks associated
with an event.
Most backends ignore this argument, with two exceptions:
1. dnotify uses it for sanity check that event is on directory
2. fanotify uses it to report fid of directory on directory entry
modification events
Remove the 'inode' argument and add a 'dir' argument.
The callback function signature is deliberately changed, because
the meaning of the argument has changed and the arguments have
been documented.
The 'dir' argument is set to when 'file_name' is specified and it is
referring to the directory that the 'file_name' entry belongs to.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we always set the full
sync flag on the inode, which forces the next fsync to use a slower code
path.
This hurts performance for workloads that dirty an amount of data that
exceeds or is very close to the system's RAM memory and do frequent fsync
operations (like database servers can for example). In particular if there
are concurrent fsyncs against different files, by falling back to a full
fsync we do a lot more checksum lookups in the checksums btree, as we do
it for all the extents created in the current transaction, instead of only
the new ones since the last fsync. These checksums lookups not only take
some time but, more importantly, they also cause contention on the
checksums btree locks due to the concurrency with checksum insertions in
the btree by ordered extents from other inodes.
We actually don't need to set the full sync flag on the inode, because we
only remove extent maps that are in the list of modified extents if they
were created in a past transaction, in which case an fsync skips them as
it's pointless to log them. So stop setting the full fsync flag on the
inode whenever we remove an extent map.
This patch is part of a patchset that consists of 3 patches, which have
the following subjects:
1/3 btrfs: fix race between page release and a fast fsync
2/3 btrfs: release old extent maps during page release
3/3 btrfs: do not set the full sync flag on the inode during page release
Performance tests were ran against a branch (misc-next) containing the
whole patchset. The test exercises a workload where there are multiple
processes writing to files and fsyncing them (each writing and fsyncing
its own file), and in total the amount of data dirtied ranges from 2x to
4x the system's RAM memory (16GiB), so that the page release callback is
invoked frequently.
The following script, using fio, was used to perform the tests:
$ cat test-fsync.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-d single -m single"
if [ $# -ne 3 ]; then
echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
exit 1
fi
NUM_JOBS=$1
FILE_SIZE=$2
FSYNC_FREQ=$3
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=write
fsync=$FSYNC_FREQ
fallocate=none
group_reporting=1
direct=0
bs=64k
ioengine=sync
size=$FILE_SIZE
directory=$MNT
numjobs=$NUM_JOBS
thread
EOF
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.
The obtained results were the following, and the last line printed by
fio is pasted (includes aggregated throughput and test run time).
*****************************************************
**** 1 job, 32GiB file, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=29.1MiB/s (30.5MB/s), 29.1MiB/s-29.1MiB/s (30.5MB/s-30.5MB/s), io=32.0GiB (34.4GB), run=1127557-1127557msec
After patchset:
WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=32.0GiB (34.4GB), run=1119042-1119042msec
(+0.7% throughput, -0.8% run time)
*****************************************************
**** 2 jobs, 16GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=33.5MiB/s (35.1MB/s), 33.5MiB/s-33.5MiB/s (35.1MB/s-35.1MB/s), io=32.0GiB (34.4GB), run=979000-979000msec
After patchset:
WRITE: bw=39.9MiB/s (41.8MB/s), 39.9MiB/s-39.9MiB/s (41.8MB/s-41.8MB/s), io=32.0GiB (34.4GB), run=821283-821283msec
(+19.1% throughput, -16.1% runtime)
*****************************************************
**** 4 jobs, 8GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=52.1MiB/s (54.6MB/s), 52.1MiB/s-52.1MiB/s (54.6MB/s-54.6MB/s), io=32.0GiB (34.4GB), run=629130-629130msec
After patchset:
WRITE: bw=71.8MiB/s (75.3MB/s), 71.8MiB/s-71.8MiB/s (75.3MB/s-75.3MB/s), io=32.0GiB (34.4GB), run=456357-456357msec
(+37.8% throughput, -27.5% runtime)
*****************************************************
**** 8 jobs, 4GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430708-430708msec
After patchset:
WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=245458-245458msec
(+74.7% throughput, -43.0% run time)
*****************************************************
**** 16 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=74.7MiB/s (78.3MB/s), 74.7MiB/s-74.7MiB/s (78.3MB/s-78.3MB/s), io=32.0GiB (34.4GB), run=438625-438625msec
After patchset:
WRITE: bw=184MiB/s (193MB/s), 184MiB/s-184MiB/s (193MB/s-193MB/s), io=32.0GiB (34.4GB), run=177864-177864msec
(+146.3% throughput, -59.5% run time)
*****************************************************
**** 32 jobs, 2GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=72.6MiB/s (76.1MB/s), 72.6MiB/s-72.6MiB/s (76.1MB/s-76.1MB/s), io=64.0GiB (68.7GB), run=902615-902615msec
After patchset:
WRITE: bw=227MiB/s (238MB/s), 227MiB/s-227MiB/s (238MB/s-238MB/s), io=64.0GiB (68.7GB), run=288936-288936msec
(+212.7% throughput, -68.0% run time)
*****************************************************
**** 64 jobs, 1GiB files, fsync frequency 1 ****
*****************************************************
Before patchset:
WRITE: bw=98.8MiB/s (104MB/s), 98.8MiB/s-98.8MiB/s (104MB/s-104MB/s), io=64.0GiB (68.7GB), run=663126-663126msec
After patchset:
WRITE: bw=294MiB/s (308MB/s), 294MiB/s-294MiB/s (308MB/s-308MB/s), io=64.0GiB (68.7GB), run=222940-222940msec
(+197.6% throughput, -66.4% run time)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When removing an extent map at try_release_extent_mapping(), called through
the page release callback (btrfs_releasepage()), we never release an extent
map that is in the list of modified extents. This is to prevent races with
a concurrent fsync using the fast path, which could lead to not logging an
extent created in the current transaction.
However we can safely remove an extent map created in a past transaction
that is still in the list of modified extents (because no one fsynced yet
the inode after that transaction got commited), because such extents are
skipped during an fsync as it is pointless to log them. This change does
that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When releasing an extent map, done through the page release callback, we
can race with an ongoing fast fsync and cause the fsync to miss a new
extent and not log it. The steps for this to happen are the following:
1) A page is dirtied for some inode I;
2) Writeback for that page is triggered by a path other than fsync, for
example by the system due to memory pressure;
3) When the ordered extent for the extent (a single 4K page) finishes,
we unpin the corresponding extent map and set its generation to N,
the current transaction's generation;
4) The btrfs_releasepage() callback is invoked by the system due to
memory pressure for that no longer dirty page of inode I;
5) At the same time, some task calls fsync on inode I, joins transaction
N, and at btrfs_log_inode() it sees that the inode does not have the
full sync flag set, so we proceed with a fast fsync. But before we get
into btrfs_log_changed_extents() and lock the inode's extent map tree:
6) Through btrfs_releasepage() we end up at try_release_extent_mapping()
and we remove the extent map for the new 4Kb extent, because it is
neither pinned anymore nor locked. By calling remove_extent_mapping(),
we remove the extent map from the list of modified extents, since the
extent map does not have the logging flag set. We unlock the inode's
extent map tree;
7) The task doing the fast fsync now enters btrfs_log_changed_extents(),
locks the inode's extent map tree and iterates its list of modified
extents, which no longer has the 4Kb extent in it, so it does not log
the extent;
8) The fsync finishes;
9) Before transaction N is committed, a power failure happens. After
replaying the log, the 4K extent of inode I will be missing, since
it was not logged due to the race with try_release_extent_mapping().
So fix this by teaching try_release_extent_mapping() to not remove an
extent map if it's still in the list of modified extents.
Fixes: ff44c6e36dc9dc ("Btrfs: do not hold the write_lock on the extent tree while logging")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When we're (re)mounting a btrfs filesystem we set the
BTRFS_FS_STATE_REMOUNTING state in fs_info to serialize against async
reclaim or defrags.
This flag is set in btrfs_remount_prepare() called by btrfs_remount().
As btrfs_remount_prepare() does nothing but setting this flag and
doesn't have a second caller, we can just open-code the flag setting in
btrfs_remount().
Similarly do for so clearing of the flag by moving it out of
btrfs_remount_cleanup() into btrfs_remount() to be symmetrical.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously we depended on some weird behavior in our chunk allocator to
force the allocation of new stripes, so by the time we got to doing the
reduce we would usually already have a chunk with the proper target.
However that behavior causes other problems and needs to be removed.
First however we need to remove this check to only restripe if we
already have those available profiles, because if we're allocating our
first chunk it obviously will not be available. Simply use the target
as specified, and if that fails it'll be because we're out of space.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs/061 has been failing consistently for me recently with a
transaction abort. We run out of space in the system chunk array, which
means we've allocated way too many system chunks than we need.
Chris added this a long time ago for balance as a poor mans restriping.
If you had a single disk and then added another disk and then did a
balance, update_block_group_flags would then figure out which RAID level
you needed.
Fast forward to today and we have restriping behavior, so we can
explicitly tell the fs that we're trying to change the raid level. This
is accomplished through the normal get_alloc_profile path.
Furthermore this code actually causes btrfs/061 to fail, because we do
things like mkfs -m dup -d single with multiple devices. This trips
this check
alloc_flags = update_block_group_flags(fs_info, cache->flags);
if (alloc_flags != cache->flags) {
ret = btrfs_chunk_alloc(trans, alloc_flags, CHUNK_ALLOC_FORCE);
in btrfs_inc_block_group_ro. Because we're balancing and scrubbing, but
not actually restriping, we keep forcing chunk allocation of RAID1
chunks. This eventually causes us to run out of system space and the
file system aborts and flips read only.
We don't need this poor mans restriping any more, simply use the normal
get_alloc_profile helper, which will get the correct alloc_flags and
thus make the right decision for chunk allocation. This keeps us from
allocating a billion system chunks and falling over.
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When running with -o enospc_debug you can get the following splat if one
of the dump_space_info's trip
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G OE
------------------------------------------------------
dd/563090 is trying to acquire lock:
ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs]
but task is already holding lock:
ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&cache->lock){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs]
find_free_extent+0x7ef/0x13b0 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x340 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x122/0x530 [btrfs]
btrfs_cow_block+0x106/0x210 [btrfs]
commit_cowonly_roots+0x55/0x300 [btrfs]
btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x36/0x70
cleanup_mnt+0x104/0x160
task_work_run+0x5f/0x90
__prepare_exit_to_usermode+0x1bd/0x1c0
do_syscall_64+0x5e/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&space_info->lock){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs]
btrfs_inode_rsv_release+0x4f/0x170 [btrfs]
btrfs_clear_delalloc_extent+0x155/0x480 [btrfs]
clear_state_bit+0x81/0x1a0 [btrfs]
__clear_extent_bit+0x25c/0x5d0 [btrfs]
clear_extent_bit+0x15/0x20 [btrfs]
btrfs_invalidatepage+0x2b7/0x3c0 [btrfs]
truncate_cleanup_page+0x47/0xe0
truncate_inode_pages_range+0x238/0x840
truncate_pagecache+0x44/0x60
btrfs_setattr+0x202/0x5e0 [btrfs]
notify_change+0x33b/0x490
do_truncate+0x76/0xd0
path_openat+0x687/0xa10
do_filp_open+0x91/0x100
do_sys_openat2+0x215/0x2d0
do_sys_open+0x44/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&tree->lock#2){+.+.}-{2:2}:
_raw_spin_lock+0x25/0x30
find_first_extent_bit+0x32/0x150 [btrfs]
write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs]
__btrfs_write_out_cache+0x172/0x480 [btrfs]
btrfs_write_out_cache+0x7a/0xf0 [btrfs]
btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs]
commit_cowonly_roots+0x245/0x300 [btrfs]
btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
close_ctree+0xf9/0x2f5 [btrfs]
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x36/0x70
cleanup_mnt+0x104/0x160
task_work_run+0x5f/0x90
__prepare_exit_to_usermode+0x1bd/0x1c0
do_syscall_64+0x5e/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&ctl->tree_lock){+.+.}-{2:2}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
_raw_spin_lock+0x25/0x30
btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_space_info+0xf4/0x120 [btrfs]
btrfs_reserve_extent+0x176/0x180 [btrfs]
__btrfs_prealloc_file_range+0x145/0x550 [btrfs]
cache_save_setup+0x28d/0x3b0 [btrfs]
btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
btrfs_commit_transaction+0xcc/0xac0 [btrfs]
btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
btrfs_file_write_iter+0x3cf/0x610 [btrfs]
new_sync_write+0x11e/0x1b0
vfs_write+0x1c9/0x200
ksys_write+0x68/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&ctl->tree_lock --> &space_info->lock --> &cache->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&cache->lock);
lock(&space_info->lock);
lock(&cache->lock);
lock(&ctl->tree_lock);
*** DEADLOCK ***
6 locks held by dd/563090:
#0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200
#1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs]
#2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs]
#3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs]
#4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs]
#5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]
stack backtrace:
CPU: 3 PID: 563090 Comm: dd Tainted: G OE 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? wake_up_klogd.part.0+0x30/0x40
lock_acquire+0xab/0x360
? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
_raw_spin_lock+0x25/0x30
? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_free_space+0x2b/0xa0 [btrfs]
btrfs_dump_space_info+0xf4/0x120 [btrfs]
btrfs_reserve_extent+0x176/0x180 [btrfs]
__btrfs_prealloc_file_range+0x145/0x550 [btrfs]
? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs]
cache_save_setup+0x28d/0x3b0 [btrfs]
btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
btrfs_commit_transaction+0xcc/0xac0 [btrfs]
? start_transaction+0xe0/0x5b0 [btrfs]
btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
? ktime_get_coarse_real_ts64+0xa8/0xd0
? trace_hardirqs_on+0x1c/0xe0
btrfs_file_write_iter+0x3cf/0x610 [btrfs]
new_sync_write+0x11e/0x1b0
vfs_write+0x1c9/0x200
ksys_write+0x68/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because we're holding the block_group->lock while trying to dump
the free space cache. However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are currently getting this lockdep splat in btrfs/161:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G E
------------------------------------------------------
mount/678048 is trying to acquire lock:
ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]
but task is already holding lock:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x8b/0x8f0
btrfs_init_new_device+0x2d2/0x1240 [btrfs]
btrfs_ioctl+0x1de/0x2d20 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
__mutex_lock+0x8b/0x8f0
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
*** DEADLOCK ***
3 locks held by mount/678048:
#0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
#1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
#2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
stack backtrace:
CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? asm_sysvec_apic_timer_interrupt+0x12/0x20
lock_acquire+0xab/0x360
? clone_fs_devices+0x4d/0x170 [btrfs]
__mutex_lock+0x8b/0x8f0
? clone_fs_devices+0x4d/0x170 [btrfs]
? rcu_read_lock_sched_held+0x52/0x60
? cpumask_next+0x16/0x20
? module_assert_mutex_or_preempt+0x14/0x40
? __module_address+0x28/0xf0
? clone_fs_devices+0x4d/0x170 [btrfs]
? static_obj+0x4f/0x60
? lockdep_init_map_waits+0x43/0x200
? clone_fs_devices+0x4d/0x170 [btrfs]
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
? super_setup_bdi_name+0x79/0xd0
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? vfs_parse_fs_string+0x84/0xb0
? rcu_read_lock_sched_held+0x52/0x60
? kfree+0x2b5/0x310
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? rcu_read_lock_sched_held+0x52/0x60
? legacy_get_tree+0x30/0x50
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
? memdup_user+0x4e/0x90
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex. The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem. We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.
An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
