| Age | Commit message (Collapse) | Author |
|---|
|
The 'NFS error' NFSERR_OPNOTSUPP is not described by any of the official
NFS related RFCs, but appears to have snuck into some older .x files for
NFSv2.
Either way, it is not in RFC1094, RFC1813 or any of the NFSv4 RFCs, so
should not be returned by the knfsd server, and particularly not by the
"LOOKUP" operation.
Instead, let's return NFSERR_STALE, which is more appropriate if the
filesystem encodes the filehandle as FILEID_INVALID.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Define a constant for the max superblock size, to avoid a too-large
shift.
Reported-by: syzbot+a8b0fb419355c91dda7f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_fs_quota_read_inode() wasn't entirely updated to the
bch2_snapshot_tree() helper, which takes rcu lock.
Reported-by: syzbot+a3a9a61224ed3b7f0010@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ancient versions of bcachefs produced packed formats that could
represent keys that our in memory format cannot represent;
bformat_needs_redo() has some tricky shifts to check for this sort of
overflow.
Reported-by: syzbot+594427aebfefeebe91c6@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For forwards compatibility we have to allow unknown key types, and only
run the checks that make sense against them.
Fix a missing guard on k.k->type being known.
Reported-by: syzbot+ae4dc916da3ce51f284f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were forgetting to check for jset entries that overrun the end of the
section - both in validate and to_text(); to_text() needs to be safe for
types that fail to validate.
Reported-by: syzbot+c48865e11e7e893ec4ab@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+10827fa6b176e1acf1d0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
filefrag (and potentially other utilities that call fiemap) sometimes
pass ULONG_MAX as the length. fiemap_prep clamps excessively large
lengths - but the calculation of end can overflow if it occurs before
calling fiemap_prep. When this happens, filefrag assumes it has read to
the end and exits.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The bucket_gens array is a single array allocation (one byte per
bucket), and kernel allocations are still limited to INT_MAX.
Check this limit to avoid failing the bucket_gens array allocation.
Reported-by: syzbot+b29f436493184ea42e2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_get_next_dev() and bch2_get_next_online_dev() iterate over devices,
dropping and taking refs as they go; we can't access the previous device
(for ca->dev_idx) after we've dropped our ref to it, unless we take
rcu_read_lock() first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_dev_lookup() is supposed to take a ref on the device it returns, but
for_each_member_device() takes refs as it iterates,
for_each_member_device_rcu() does not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Normally this is initialized in __bch2_write(), which is executed in a
loop, but the inline data path skips this.
Reported-by: syzbot+fd3ccb331eb21f05d13b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+66b9b74f6520068596a9@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+a35cdb62ec34d44fb062@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want the assert when we're checking if the backpointer is
valid.
Reported-by: syzbot+bf7215c0525098e7747a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+3333603f569fc2ef258c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're using mutex_lock() inside a wait_event() conditional -
prepare_to_wait() has already flipped task state, so potentially
blocking ops need annotation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Arnd Bergmann sent a patch to fsdevel, he says:
"orangefs_statfs() copies two consecutive fields of the superblock into
the statfs structure, which triggers a warning from the string fortification
helpers"
Jan Kara suggested an alternate way to do the patch to make it more readable.
I ran both ideas through xfstests and both seem fine. This patch
is based on Jan Kara's suggestion.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
When security labeling is enabled, the client can pass a file security
label as part of a create operation for the new file, similar to mode
and other attributes. At present, the security label is received by nfsd
and passed down to nfsd_create_setattr(), but nfsd_setattr() is never
called and therefore the label is never set on the new file. This bug
may have been introduced on or around commit d6a97d3f589a ("NFSD:
add security label to struct nfsd_attrs"). Looking at nfsd_setattr()
I am uncertain as to whether the same issue presents for
file ACLs and therefore requires a similar fix for those.
An alternative approach would be to introduce a new LSM hook to set the
"create SID" of the current task prior to the actual file creation, which
would atomically label the new inode at creation time. This would be better
for SELinux and a similar approach has been used previously
(see security_dentry_create_files_as) but perhaps not usable by other LSMs.
Reproducer:
1. Install a Linux distro with SELinux - Fedora is easiest
2. git clone https://github.com/SELinuxProject/selinux-testsuite
3. Install the requisite dependencies per selinux-testsuite/README.md
4. Run something like the following script:
MOUNT=$HOME/selinux-testsuite
sudo systemctl start nfs-server
sudo exportfs -o rw,no_root_squash,security_label localhost:$MOUNT
sudo mkdir -p /mnt/selinux-testsuite
sudo mount -t nfs -o vers=4.2 localhost:$MOUNT /mnt/selinux-testsuite
pushd /mnt/selinux-testsuite/
sudo make -C policy load
pushd tests/filesystem
sudo runcon -t test_filesystem_t ./create_file -f trans_test_file \
-e test_filesystem_filetranscon_t -v
sudo rm -f trans_test_file
popd
sudo make -C policy unload
popd
sudo umount /mnt/selinux-testsuite
sudo exportfs -u localhost:$MOUNT
sudo rmdir /mnt/selinux-testsuite
sudo systemctl stop nfs-server
Expected output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: unconfined_u:object_r:test_filesystem_filetranscon_t:s0
File context is correct
Actual output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: system_u:object_r:test_file_t:s0
File context error, expected:
test_filesystem_filetranscon_t
got:
test_file_t
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clients that send an OFFLOAD_STATUS might want to distinguish
between an async COPY operation that is still running, has
completed successfully, or that has failed.
The intention of this patch is to make NFSD behave like this:
* Copy still running:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied
so far, and an empty osr_status array
* Copy completed successfully:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status of NFS4_OK
* Copy failed:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status other than NFS4_OK
* Copy operation lost, canceled, or otherwise unrecognized:
OFFLOAD_STATUS returns NFS4ERR_BAD_STATEID
NB: Though RFC 7862 Section 11.2 lists a small set of NFS status
codes that are valid for OFFLOAD_STATUS, there do not seem to be any
explicit spec limits on the status codes that may be returned in the
osr_status field.
At this time we have no unit tests for COPY and its brethren, as
pynfs does not yet implement support for NFSv4.2.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
After a client has started an asynchronous COPY operation, a
subsequent OFFLOAD_STATUS operation will need to report the status
code once that COPY operation has completed. The recorded status
record will be used by a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_ports netlink command. For listener-set, userspace is
expected to provide a NFS listeners list it wants enabled. All other
sockets will be closed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Co-developed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_version netlink command through a "declarative" interface.
This patch introduces a change in behavior since for version-set userspace
is expected to provide a NFS major/minor version list it wants to enable
while all the other ones will be disabled. (procfs write_version
command implements imperative interface where the admin writes +3/-3 to
enable/disable a single version.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_threads netlink command similar to the one available
through the procfs.
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Co-developed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently admins set this by using unshare to create a new uts
namespace, and then resetting the hostname. With the new netlink
interface we can just pass this in directly. Prepare nfsd_svc for
this change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd_svc holds the nfsd_mutex over the whole function. For
some of the later netlink patches though, we want to do some other
things to the server before starting it. Move the mutex handling into
the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In 'nlm_alloc_host', the host has already been assigned a value of NULL
when defined, so 'host=NULL;' Can be deleted.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set, the virtual file
/proc/fs/nfsd/nfsv4recoverydir
is created but responds EINVAL to any access.
This is not useful, is somewhat surprising, and it causes ltp to
complain.
The only known user of this file is in nfs-utils, which handles
non-existence and read-failure equally well. So there is nothing to
gain from leaving the file present but inaccessible.
So this patch removes the file when its content is not available - i.e.
when that config option is not selected.
Also remove the #ifdef which hides some of the enum values when
CONFIG_NFSD_V$ not selection. simple_fill_super() quietly ignores array
entries that are not present, so having slots in the array that don't
get used is perfectly acceptable. So there is no value in this #ifdef.
Reported-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 74fd48739d04 ("nfsd: new Kconfig option for legacy client tracking")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
recalculate_deny_mode() takes time that is linear in the number of
stateids active on the file.
When called from
release_openowner -> free_ol_stateid_reaplist ->nfs4_free_ol_stateid
-> release_all_access
the number of times it is called is linear in the number of stateids.
The net result is that time taken by release_openowner is quadratic in
the number of stateids.
When the nfsd server is shut down while there are many active stateids
this can result in a soft lockup. ("CPU stuck for 302s" seen in one case).
In many cases all the states have the same deny modes and there is no
need to examine the entire list in recalculate_deny_mode(). In
particular, recalculate_deny_mode() will only reduce the deny mode,
never increase it. So if some prefix of the list causes the original
deny mode to be required, there is no need to examine the remainder of
the list.
So we can improve recalculate_deny_mode() to usually run in constant
time, so release_openowner will typically be only linear in the number
of states.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Show client info alongside the number of cl_rpc_users. If that's
elevated, then we can infer that this function returned nfserr_jukebox.
[ cel: For additional debugging of RPC user refcounting ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace a dprintk in check_slot_seqid with tracepoints. These new
tracepoints track slot sequence numbers during operation.
Suggested-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We never want a newline in tracepoint output.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use group allocation/free of per-cpu counters api to accelerate
nfsd percpu_counters init/destroy(), and also squash the
nfsd_percpu_counters_init/reset/destroy() and nfsd_counters_init/destroy()
into callers to simplify code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This adds basic infrastructure for handing GET_DIR_DELEGATION calls from
clients, including the decoders and encoders. For now, it always just
returns NFS4_OK + GDD4_UNAVAIL.
Eventually clients may start sending this operation, and it's better if
we can return GDD4_UNAVAIL instead of having to abort the whole compound.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 883820366747 ("nfsd: update workqueue creation") made the
callback_wq single-threaded, presumably to protect modifications of
cl_cb_client. See documenting comment for nfsd4_process_cb_update().
However, cl_cb_client is per-lease. There's no other reason that all
callback operations need to be dispatched via a single thread. The
single threading here means all client callbacks can be blocked by a
problem with one client.
Change the NFSv4 callback client so it serializes per-lease instead
of serializing all NFSv4 callback operations on the server.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
move_to_close_lru() is currently called with ->st_mutex held.
This can lead to a deadlock as move_to_close_lru() waits for sc_count to
drop to 2, and some threads holding a reference might be waiting for the
mutex. These references will never be dropped so sc_count will never
reach 2.
There can be no harm in dropping ->st_mutex before
move_to_close_lru() because the only place that takes the mutex is
nfsd4_lock_ol_stateid(), and it quickly aborts if sc_type is
NFS4_CLOSED_STID, which it will be before move_to_close_lru() is called.
See also
https://lore.kernel.org/lkml/4dd1fe21e11344e5969bb112e954affb@jd.com/T/
where this problem was raised but not successfully resolved.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
move_to_close_lru() waits for sc_count to become zero while holding
rp_mutex. This can deadlock if another thread holds a reference and is
waiting for rp_mutex.
By the time we get to move_to_close_lru() the openowner is unhashed and
cannot be found any more. So code waiting for the mutex can safely
retry the lookup if move_to_close_lru() has started.
So change rp_mutex to an atomic_t with three states:
RP_UNLOCK - state is still hashed, not locked for reply
RP_LOCKED - state is still hashed, is locked for reply
RP_UNHASHED - state is not hashed, no code can get a lock.
Use wait_var_event() to wait for either a lock, or for the owner to be
unhashed. In the latter case, retry the lookup.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than taking the rp_mutex (via nfsd4_cstate_assign_replay) in
nfsd4_cleanup_open_state() (which seems counter-intuitive), take it and
assign rp_owner as soon as possible - in nfsd4_process_open1().
This will support a future change when nfsd4_cstate_assign_replay() might
fail.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently find_openstateowner_str look ups are done both in
nfsd4_process_open1() and alloc_init_open_stateowner() - the latter
possibly being a surprise based on its name.
It would be easier to follow, and more conformant to common patterns, if
the lookup was all in the one place.
So replace alloc_init_open_stateowner() with
find_or_alloc_open_stateowner() and use the latter in
nfsd4_process_open1() without any calls to find_openstateowner_str().
This means all finds are find_openstateowner_str_locked() and
find_openstateowner_str() is no longer needed. So discard
find_openstateowner_str() and rename find_openstateowner_str_locked() to
find_openstateowner_str().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Combine the three boolean arguments into one flags argument for
readability.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Removes uses of page_mapping() and page_index().
Link: https://lkml.kernel.org/r/20240423225552.4113447-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Remove page_mapping()".
There are only a few users left. Convert them all to either call
folio_mapping() or just use folio->mapping directly.
This patch (of 6):
Remove uses of page->index, page_mapping() and b_page. Saves a call
to compound_head().
Link: https://lkml.kernel.org/r/20240423225552.4113447-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240423225552.4113447-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's get rid of another page_mapcount() check and simply use
folio_likely_mapped_shared(), which is precise for hugetlb folios.
While at it, use huge_ptep_get() + pte_page() instead of ptep_get() +
vm_normal_page(), just like we do in pagemap_hugetlb_range().
No functional change intended.
Link: https://lkml.kernel.org/r/20240417092313.753919-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fs/proc/task_mmu: convert hugetlb functions to work on folis".
Let's convert two more functions, getting rid of two more page_mapcount()
calls.
This patch (of 2):
Let's get rid of another page_mapcount() check and simply use
folio_likely_mapped_shared(), which is precise for hugetlb folios.
While at it, also check for PMD table sharing, like we do in
smaps_hugetlb_range().
No functional change intended, except that we would now detect hugetlb
folios shared via PMD table sharing correctly.
Link: https://lkml.kernel.org/r/20240417092313.753919-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240417092313.753919-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add some more information about the state of the buffer_head returned.
Link: https://lkml.kernel.org/r/20240416031754.4076917-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Distinguish these functions from brelse() and __brelse().
Link: https://lkml.kernel.org/r/20240416031754.4076917-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the documentation for __brelse() to brelse(), format it as kernel-doc
and update it from talking about pages to folios.
Link: https://lkml.kernel.org/r/20240416031754.4076917-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The extra indentation confused the kernel-doc parser, so remove it. Fix
some other wording while I'm here, and advise the user they need to call
brelse() on this buffer.
__bread_gfp() isn't used directly by filesystems, but the other wrappers
for it don't have documentation, so document it accordingly.
Link: https://lkml.kernel.org/r/20240416031754.4076917-5-willy@infradead.org
Co-developed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
