| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
Individual bits GENERIC_READ, GENERIC_EXECUTE and GENERIC_ALL have meaning
which includes also access right for FILE_READ_ATTRIBUTES. So specifying
FILE_READ_ATTRIBUTES bit together with one of those GENERIC (except
GENERIC_WRITE) does not do anything.
This change prevents calling additional (fallback) code and sending more
requests without FILE_READ_ATTRIBUTES when the primary request fails on
-EACCES, as it is not needed at all.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If SMB2_OP_QUERY_INFO (called when POSIX extensions are not used) failed
with STATUS_ACCESS_DENIED then it means that caller does not have
permission to open the path with FILE_READ_ATTRIBUTES access and therefore
cannot issue SMB2_OP_QUERY_INFO command.
This will result in the -EACCES error from stat() sycall.
There is an alternative way how to query limited information about path but
still suitable for stat() syscall. SMB2 OPEN/CREATE operation returns in
its successful response subset of query information.
So try to open the path without FILE_READ_ATTRIBUTES but with
MAXIMUM_ALLOWED access which will grant the maximum possible access to the
file and the response will contain required query information for stat()
syscall.
This will improve smb2_query_path_info() to query also files which do not
grant FILE_READ_ATTRIBUTES access to caller.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some operations, like WRITE, does not require FILE_READ_ATTRIBUTES access.
So when FILE_READ_ATTRIBUTES is not explicitly requested for
smb2_open_file() then first try to do SMB2 CREATE with FILE_READ_ATTRIBUTES
access (like it was before) and then fallback to SMB2 CREATE without
FILE_READ_ATTRIBUTES access (less common case).
This change allows to complete WRITE operation to a file when it does not
grant FILE_READ_ATTRIBUTES permission and its parent directory does not
grant READ_DATA permission (parent directory READ_DATA is implicit grant of
child FILE_READ_ATTRIBUTES permission).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function
and instead SMBLegacyOpen() needs to be used. This logic is already handled
in cifs_open_file() function, which is server->ops->open callback function.
So for querying and creating MF symlinks use open callback function instead
of CIFS_open() function directly.
This change fixes querying and creating new MF symlinks on Windows 98.
Currently cifs_query_mf_symlink() is not able to detect MF symlink and
cifs_create_mf_symlink() is failing with EIO error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When converting access_flags to SMBOPEN mode, check for all possible access
flags, not only GENERIC_READ and GENERIC_WRITE flags.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB negotiate retry functionality in cifs_negotiate() is currently broken
and does not work when doing socket reconnect. Caller of this function,
which is cifs_negotiate_protocol() requires that tcpStatus after successful
execution of negotiate callback stay in CifsInNegotiate. But if the
CIFSSMBNegotiate() called from cifs_negotiate() fails due to connection
issues then tcpStatus is changed as so repeated CIFSSMBNegotiate() call
does not help.
Fix this problem by moving retrying code from negotiate callback (which is
either cifs_negotiate() or smb2_negotiate()) to cifs_negotiate_protocol()
which is caller of those callbacks. This allows to properly handle and
implement correct transistions between tcpStatus states as function
cifs_negotiate_protocol() already handles it.
With this change, cifs_negotiate_protocol() now handles also -EAGAIN error
set by the RFC1002_NEGATIVE_SESSION_RESPONSE processing after reconnecting
with NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now all NetBIOS session logic is handled in ip_rfc1001_connect() function,
so cleanup is_smb_response() function which contains generic handling of
incoming SMB packets. Note that function is_smb_response() is not used
directly or indirectly (e.g. over cifs_demultiplex_thread() by
ip_rfc1001_connect() function.
Except the Negative Session Response and the Session Keep Alive packet, the
cifs_demultiplex_thread() should not receive any NetBIOS session packets.
And Session Keep Alive packet may be received only when the NetBIOS session
was established by ip_rfc1001_connect() function. So treat any such packet
as error and schedule reconnect.
Negative Session Response packet is returned from Windows SMB server (from
Windows 98 and also from Windows Server 2022) if client sent over port 139
SMB negotiate request without previously establishing a NetBIOS session.
The common scenario is that Negative Session Response packet is returned
for the SMB negotiate packet, which is the first one which SMB client
sends (if it is not establishing a NetBIOS session).
Note that server port 139 may be forwarded and mapped between virtual
machines to different number. And Linux SMB client do not call function
ip_rfc1001_connect() when prot is not 139. So nowadays when using port
mapping or port forwarding between VMs, it is not so uncommon to see this
error.
Currently the logic on Negative Session Response packet changes server port
to 445 and force reconnection. But this logic does not work when using
non-standard port numbers and also does not help if the server on specified
port is requiring establishing a NetBIOS session.
Fix this Negative Session Response logic and instead of changing server
port (on which server does not have to listen), force reconnection with
establishing a NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently SMB client always tries to initialize NetBIOS session when the
server port is 139. This is useful for default cases, but nowadays when
using non-standard routing or testing between VMs, it is common that
servers are listening on non-standard ports.
So add a new mount option -o nbsessinit and -o nonbsessinit which either
forces initialization or disables initialization regardless of server port
number.
This allows Linux SMB client to connect to older SMB1 server listening on
non-standard port, which requires initialization of NetBIOS session, by
using additional mount options -o port= and -o nbsessinit.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Changing owner is controlled by DACL permission WRITE_OWNER. Changing DACL
itself is controlled by DACL permisssion WRITE_DAC. Owner of the file has
implicit WRITE_DAC permission even when it is not explicitly granted for
owner by DACL.
Reading DACL or owner is controlled only by one permission READ_CONTROL.
WRITE_OWNER permission can be bypassed by the SeTakeOwnershipPrivilege,
which is by default available for local administrators.
So if the local administrator wants to access some file to which does not
have access, it is required to first change owner to ourself and then
change DACL permissions.
Currently Linux SMB client does not support this because client does not
provide a way to change owner without touching DACL permissions.
Fix this problem by introducing a new xattr "system.smb3_ntsd_owner" for
setting/changing only owner part of the security descriptor.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Access to SACL part of SMB security descriptor is granted by SACL privilege
which by default is accessible only for local administrator. But it can be
granted to any other user by local GPO or AD. SACL access is not granted by
DACL permissions and therefore is it possible that some user would not have
access to DACLs of some file, but would have access to SACLs of all files.
So it means that for accessing SACLs (either getting or setting) in some
cases requires not touching or asking for DACLs.
Currently Linux SMB client does not allow to get or set SACLs without
touching DACLs. Which means that user without DACL access is not able to
get or set SACLs even if it has access to SACLs.
Fix this problem by introducing a new xattr "system.smb3_ntsd_sacl" for
accessing only SACLs part of the security descriptor (therefore without
DACLs and OWNER/GROUP).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The dacloffset field was originally typed as int and used in an
unchecked addition, which could overflow and bypass the existing
bounds check in both smb_check_perm_dacl() and smb_inherit_dacl().
This could result in out-of-bounds memory access and a kernel crash
when dereferencing the DACL pointer.
This patch converts dacloffset to unsigned int and uses
check_add_overflow() to validate access to the DACL.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a race condition between session setup and
ksmbd_sessions_deregister. The session can be freed before the connection
is added to channel list of session.
This patch check reference count of session before freeing it.
Cc: stable@vger.kernel.org
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a SMB connection is reset and reconnected, the negotiated IO
parameters (rsize/wsize) can become out of sync with the server's
current capabilities. This can lead to suboptimal performance or
even IO failures if the server's limits have changed.
This patch implements automatic IO size renegotiation:
1. Adds cifs_renegotiate_iosize() function to update all superblocks
associated with a tree connection
2. Updates each mount's rsize/wsize based on current server capabilities
3. Calls this function after successful tree connection reconnection
With this change, all mount points will automatically maintain optimal
and reliable IO parameters after network disruptions, using the
bidirectional mapping added in previous patches.
This completes the series improving connection resilience by keeping
mount parameters synchronized with server capabilities.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
During mount option processing and negotiation with the server, the
original user-specified rsize/wsize values were being modified directly.
This makes it impossible to recover these values after a connection
reset, leading to potential degraded performance after reconnection.
The other problem is that When negotiating read and write sizes, there are
cases where the negotiated values might calculate to zero, especially
during reconnection when server->max_read or server->max_write might be
reset. In general, these values come from the negotiation response.
According to MS-SMB2 specification, these values should be at least 65536
bytes.
This patch improves IO parameter handling:
1. Adds vol_rsize and vol_wsize fields to store the original user-specified
values separately from the negotiated values
2. Uses got_rsize/got_wsize flags to determine if values were
user-specified rather than checking for non-zero values, which is more
reliable
3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are
never negotiated down to zero, which could happen in edge cases like
when server->max_read/write is zero
The changes make the CIFS client more resilient to unusual server
responses and reconnection scenarios, preventing potential failures
when IO sizes are calculated to be zero.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, when a SMB connection is reset and renegotiated with the
server, there's no way to update all related mount points with new
negotiated sizes. This is because while superblocks (cifs_sb_info)
maintain references to tree connections (tcon) through tcon_link
structures, there is no reverse mapping from a tcon back to all the
superblocks using it.
This patch adds a bidirectional relationship between tcon and
cifs_sb_info structures by:
1. Adding a cifs_sb_list to tcon structure with appropriate locking
2. Adding tcon_sb_link to cifs_sb_info to join the list
3. Managing the list entries during mount and umount operations
The bidirectional relationship enables future functionality to locate and
update all superblocks connected to a specific tree connection, such as:
- Updating negotiated parameters after reconnection
- Efficiently notifying all affected mounts of capability changes
This is the first part of a series to improve connection resilience
by keeping all mount parameters in sync with server capabilities
after reconnection.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
echo_interval is checked at mount time, the code has become
unreachable.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The echo_interval is not limited in any way during mounting,
which makes it possible to write a large number to it. This can
cause an overflow when multiplying ctx->echo_interval by HZ in
match_server().
Add constraints for echo_interval to smb3_fs_context_parse_param().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: adfeb3e00e8e1 ("cifs: Make echo interval tunable")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull more bcachefs updates from Kent Overstreet:
"All bugfixes and logging improvements"
* tag 'bcachefs-2025-03-31' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: fix bch2_write_point_to_text() units
bcachefs: Log original key being moved in data updates
bcachefs: BCH_JSET_ENTRY_log_bkey
bcachefs: Reorder error messages that include journal debug
bcachefs: Don't use designated initializers for disk_accounting_pos
bcachefs: Silence errors after emergency shutdown
bcachefs: fix units in rebalance_status
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bcachefs: Clear fs_path_parent on subvolume unlink
bcachefs: Change btree_insert_node() assertion to error
bcachefs: Better printing of inconsistency errors
bcachefs: bch2_count_fsck_err()
bcachefs: Better helpers for inconsistency errors
bcachefs: Consistent indentation of multiline fsck errors
bcachefs: Add an "ignore unknown" option to bch2_parse_mount_opts()
bcachefs: bch2_time_stats_init_no_pcpu()
bcachefs: Fix bch2_fs_get_tree() error path
bcachefs: fix logging in journal_entry_err_msg()
bcachefs: add missing newline in bch2_trans_updates_to_text()
bcachefs: print_string_as_lines: fix extra newline
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, and isofs updates from Jan Kara:
- conversion of ext2 to the new mount API
- small folio conversion work for ext2
- a fix of an unexpected return value in udf in inode_getblk()
- a fix of handling of corrupted directory in isofs
* tag 'fs_for_v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix inode_getblk() return value
ext2: Make ext2_params_spec static
ext2: create ext2_msg_fc for use during parsing
ext2: convert to the new mount API
ext2: Remove reference to bh->b_page
isofs: fix KMSAN uninit-value bug in do_isofs_readdir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Fix random stack corruption and incorrect error returns in
exfat_get_block()
- Optimize exfat_get_block() by improving checking corner cases
- Fix an endless loop by self-linked chain in exfat_find_last_cluster
- Remove dead EXFAT_CLUSTERS_UNTRACKED codes
- Add missing shutdown check
- Improve the delete performance with discard mount option
* tag 'exfat-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: call bh_read in get_block only when necessary
exfat: fix potential wrong error return from get_block
exfat: fix missing shutdown check
exfat: fix the infinite loop in exfat_find_last_cluster()
exfat: fix random stack corruption after get_block
exfat: remove count used cluster from exfat_statfs()
exfat: support batch discard of clusters when freeing clusters
|
|
Pull smb server updates from Steve French:
- Two fixes for bounds checks of open contexts
- Two multichannel fixes, including one for important UAF
- Oplock/lease break fix for potential ksmbd connection refcount leak
- Security fix to free crypto data more securely
- Fix to enable allowing Kerberos authentication by default
- Two RDMA/smbdirect fixes
- Minor cleanup
* tag 'v6.15rc-part1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix r_count dec/increment mismatch
ksmbd: fix multichannel connection failure
ksmbd: fix use-after-free in ksmbd_sessions_deregister()
ksmbd: use ib_device_get_netdev() instead of calling ops.get_netdev
ksmbd: use aead_request_free to match aead_request_alloc
Revert "ksmbd: fix missing RDMA-capable flag for IPoIB device in ksmbd_rdma_capable_netdev()"
ksmbd: add bounds check for create lease context
ksmbd: add bounds check for durable handle context
ksmbd: make SMB_SERVER_KERBEROS5 enable by default
ksmbd: Use str_read_write() and str_true_false() helpers
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix for network namespace refcount leak
- Multichannel fix and minor multichannel debug message cleanup
- Fix potential null ptr reference in SMB3 close
- Fix for special file handling when reparse points not supported by
server
- Two ACL fixes one for stricter ACE validation, one for incorrect
perms requested
- Three RFC1001 fixes: one for SMB3 mounts on port 139, one for better
default hostname, and one for better session response processing
- Minor update to email address for MAINTAINERS file
- Allow disabling Unicode for access to old SMB1 servers
- Three minor cleanups
* tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add new mount option -o nounicode to disable SMB1 UNICODE mode
cifs: Set default Netbios RFC1001 server name to hostname in UNC
smb: client: Fix netns refcount imbalance causing leaks and use-after-free
cifs: add validation check for the fields in smb_aces
CIFS: Propagate min offload along with other parameters from primary to secondary channels.
cifs: Improve establishing SMB connection with NetBIOS session
cifs: Fix establishing NetBIOS session for SMB2+ connection
cifs: Fix getting DACL-only xattr system.cifs_acl and system.smb3_acl
cifs: Check if server supports reparse points before using them
MAINTAINERS: reorder preferred email for Steve French
cifs: avoid NULL pointer dereference in dbg call
smb: client: Remove redundant check in smb2_is_path_accessible()
smb: client: Remove redundant check in cifs_oplock_break()
smb: mark the new channel addition log as informational log with cifs_info
smb: minor cleanup to remove unused function declaration
|
|
Pull nfsd updates from Chuck Lever:
"Neil Brown contributed more scalability improvements to NFSD's open
file cache, and Jeff Layton contributed a menagerie of repairs to
NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount. This
is because NFSv4 state recovery is currently difficult if not
impossible for re-exported NFS mounts. The change aims to prevent data
integrity exposures after the re-export server crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.15 development cycle"
* tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add a Kconfig setting to enable delegated timestamps
sysctl: Fixes nsm_local_state bounds
nfsd: use a long for the count in nfsd4_state_shrinker_count()
nfsd: remove obsolete comment from nfs4_alloc_stid
nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault()
nfsd: reorganize struct nfs4_delegation for better packing
nfsd: handle errors from rpc_call_async()
nfsd: move cb_need_restart flag into cb_flags
nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING
nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY
nfsd: prevent callback tasks running concurrently
nfsd: disallow file locking and delegations for NFSv4 reexport
nfsd: filecache: drop the list_lru lock during lock gc scans
nfsd: filecache: don't repeatedly add/remove files on the lru list
nfsd: filecache: introduce NFSD_FILE_RECENT
nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc()
nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync()
NFSD: Re-organize nfsd_file_gc_worker()
nfsd: filecache: remove race handling.
fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning
...
|
|
This was previously hard to hit since it requires racing with device
removal, but splitting up io_ref uncovered it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Struct with embedded VLA...
memcpy: detected field-spanning write (size 8) of single field "&gc->r.e" at fs/bcachefs/ec.c:465 (size 3)
WARNING: CPU: 1 PID: 936 at fs/bcachefs/ec.c:465 bch2_trigger_stripe+0x706/0x730
Modules linked in:
CPU: 1 UID: 0 PID: 936 Comm: mount.bcachefs Not tainted 6.14.0-rc6-ktest-00236-gefb0b5c62dbc #55
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:bch2_trigger_stripe+0x706/0x730
Code: b4 00 01 b9 03 00 00 00 48 89 fb 48 c7 c7 33 54 da 81 48 89 d6 49 89 d6 48 c7 c2 c3 36 db 81 e8 60 54 c5 ff 48 89 df 4c 89 f2 <0f> 0b e9 5c fd ff ff e8 fe 5e 4e 00 bf 10 00 00 00 48 c7 c6 ff ff
RSP: 0018:ffff88817081f680 EFLAGS: 00010246
RAX: f8fe7dd1c56b5600 RBX: ffff888101265368 RCX: 0000000000000027
RDX: 0000000000000008 RSI: 00000000fffbffff RDI: ffff888101265368
RBP: 0000000000000000 R08: 000000000003ffff R09: ffff88817f1fe000
R10: 00000000000bfffd R11: 0000000000000004 R12: ffff8881012652c0
R13: 0000000000000000 R14: 0000000000000008 R15: ffff88817081f6c9
FS: 00007fc428bc7c80(0000) GS:ffff888179280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd3ee4a038 CR3: 000000010a9bc000 CR4: 0000000000750eb0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xce/0x1b0
? bch2_trigger_stripe+0x706/0x730
? report_bug+0x11b/0x1a0
? bch2_trigger_stripe+0x706/0x730
? handle_bug+0x5e/0x90
? exc_invalid_op+0x1a/0x50
? asm_exc_invalid_op+0x1a/0x20
? bch2_trigger_stripe+0x706/0x730
bch2_gc_mark_key+0x2cf/0x430
bch2_check_allocations+0x1a64/0x1ed0
? vsnprintf+0x1ad/0x420
? bch2_check_allocations+0x191f/0x1ed0
bch2_run_recovery_passes+0x13b/0x2b0
bch2_fs_recovery+0x9b7/0x1290
? __bch2_print+0xb2/0xf0
? bch2_printbuf_exit+0x1e/0x30
? print_mount_opts+0x153/0x180
bch2_fs_start+0x274/0x3b0
bch2_fs_get_tree+0x516/0x6e0
vfs_get_tree+0x21/0xa0
do_new_mount+0x153/0x350
__x64_sys_mount+0x16c/0x1f0
do_syscall_64+0x6c/0x140
? arch_exit_to_user_mode_prepare+0x9/0x40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For striping across devices, we maintain "clocks", and we advance them
by the inverse of "how much free space this device has left", so that we
round robin biased in favor of devices with more free space.
This code was originally trying to do EWMA-ish stuff when originally
written, ~10 years ago, and was never properly cleaned up when it was
realized that an EWMA is not the right approach here.
That left a bug, when we rescale to keep all the clocks in the correct
range and prevent overflow.
It was assumed that we'd always be allocated from the device with the
smallest clock hand, but that's actually not correct: with the target
options, allocations will be first tried from a subset of devices, and
then the entire filesystem if that fails.
Thus, the rescale from the first allocation - allocating from a subset
of devices - can pick the wrong rescale value and cause the rest of the
clocks to go to 0, losing information.
This resuls in incorrect striping behaviour when the desired number of
replicas doesn't fit on the foreground target.
Link: https://www.reddit.com/r/bcachefs/comments/1jn3t26/replica_allocation_not_evenly_distributed_among/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the ring is allocated, it is kzalloc-ed. ring->queue_refs will
already be initialized to 0 by default. It does not need to be
atomically set to 0.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a race condition leading to a kernel crash from a null
dereference when attemping to access fc->lock in
fuse_uring_create_queue(). fc may be NULL in the case where another
thread is creating the uring in fuse_uring_create() and has set
fc->ring but has not yet set ring->fc when fuse_uring_create_queue()
reads ring->fc. There is another race condition as well where in
fuse_uring_register(), ring->nr_queues may still be 0 and not yet set
to the new value when we compare qid against it.
This fix sets fc->ring only after ring->fc and ring->nr_queues have been
set, which guarantees now that ring->fc is a proper pointer when any
queues are created and ring->nr_queues reflects the right number of
queues if ring is not NULL. We must use smp_store_release() and
smp_load_acquire() semantics to ensure the ordering will remain correct
where fc->ring is assigned only after ring->fc and ring->nr_queues have
been assigned.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: 24fe962c86f5 ("fuse: {io-uring} Handle SQEs - register commands")
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Our file system has a translation capability for S3-to-posix.
The current value of 1kiB is enough to cover S3 keys, but
does not allow encoding of %xx escape characters.
The limit is increased to (PATH_MAX - 1), as we need
3 x 1024 and that is close to PATH_MAX (4kB) already.
-1 is used as the terminating null is not included in the
length calculation.
Testing large file names was hard with libfuse/example file systems,
so I created a new memfs that does not have a 255 file name length
limitation.
https://github.com/libfuse/libfuse/pull/1077
The connection is initialized with FUSE_NAME_LOW_MAX, which
is set to the previous value of FUSE_NAME_MAX of 1024. With
FUSE_MIN_READ_BUFFER of 8192 that is enough for two file names
+ fuse headers.
When FUSE_INIT reply sets max_pages to a value > 1 we know
that fuse daemon supports request buffers of at least 2 pages
(+ header) and can therefore hold 2 x PATH_MAX file names - operations
like rename or link that need two file names are no issue then.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_notify_inval_entry and fuse_notify_delete were using fixed allocations
of FUSE_NAME_MAX to hold the file name. Often that large buffers are not
needed as file names might be smaller, so this uses the actual file name
size to do the allocation.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Introduce two new sysctls, "default_request_timeout" and
"max_request_timeout". These control how long (in seconds) a server can
take to reply to a request. If the server does not reply by the timeout,
then the connection will be aborted. The upper bound on these sysctl
values is 65535.
"default_request_timeout" sets the default timeout if no timeout is
specified by the fuse server on mount. 0 (default) indicates no default
timeout should be enforced. If the server did specify a timeout, then
default_request_timeout will be ignored.
"max_request_timeout" sets the max amount of time the server may take to
reply to a request. 0 (default) indicates no maximum timeout. If
max_request_timeout is set and the fuse server attempts to set a
timeout greater than max_request_timeout, the system will use
max_request_timeout as the timeout. Similarly, if default_request_timeout
is greater than max_request_timeout, the system will use
max_request_timeout as the timeout. If the server does not request a
timeout and default_request_timeout is set to 0 but max_request_timeout
is set, then the timeout will be max_request_timeout.
Please note that these timeouts are not 100% precise. The request may
take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the set max
timeout due to how it's internally implemented.
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
$ echo 65536 | sudo tee /proc/sys/fs/fuse/default_request_timeout
tee: /proc/sys/fs/fuse/default_request_timeout: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/default_request_timeout
65535
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 65535
$ echo 0 | sudo tee /proc/sys/fs/fuse/default_request_timeout
0
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
[Luis Henriques: Limit the timeout to the range [FUSE_TIMEOUT_TIMER_FREQ,
fuse_max_req_timeout]]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If filesystem doesn't support FUSE_LINK (i.e. returns -ENOSYS), then
remember this and next time return immediately, without incurring the
overhead of a round trip to the server.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
link() is documented to return EPERM when a filesystem doesn't support
the operation, return that instead.
Link: https://github.com/libfuse/libfuse/issues/925
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Function fuse_uring_create() is used only from dev_uring.c and does not
need to be exposed in the header file. Furthermore, it has the wrong
signature.
While there, also remove the 'struct fuse_ring' forward declaration.
Signed-off-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
task-A (application) might be in request_wait_answer and
try to remove the request when it has FR_PENDING set.
task-B (a fuse-server io-uring task) might handle this
request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when
fetching the next request and accessed the req from
the pending list in fuse_uring_ent_assign_req().
That code path was not protected by fiq->lock and so
might race with task-A.
For scaling reasons we better don't use fiq->lock, but
add a handler to remove canceled requests from the queue.
This also removes usage of fiq->lock from
fuse_uring_add_req_to_ring_ent() altogether, as it was
there just to protect against this race and incomplete.
Also added is a comment why FR_PENDING is not cleared.
Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support")
Cc: <stable@vger.kernel.org> # v6.14
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's something going on with the data move path; log the original key
being moved for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a journal entry type for logging - but logging a bkey, not a string;
to be used for data move path debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Not all compilers fully initialize these - they're not guaranteed to
because of the union shenanigans.
Fixes: https://github.com/koverstreet/bcachefs/issues/844
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't care about errors from asynchronous ops that were because we
did an emergency shutdown; silence them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly
pruning the dcache.
Also, fix missing permissions checks.
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
