| Age | Commit message (Collapse) | Author |
|---|
|
Adjust the labels in /proc/fs/netfs/stats that refer to netfs-specific
counters. These currently all begin with "Netfs", but change them to begin
with more specific labels.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-4-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unlike other vfs_xxxx() calls, vfs_setxattr() and vfs_removexattr() don't
take the sb_writers lock, so the caller should do it for them.
Fix cachefiles to do this.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-3-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a typo in the rebalance accounting changes
- BCH_SB_MEMBER_INVALID: small on disk format feature which will be
needed for full erasure coding support; this is only the minimum so
that 6.11 can handle future versions without barfing.
* tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs:
bcachefs: BCH_SB_MEMBER_INVALID
bcachefs: fix rebalance accounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- followup fix for direct io and fsync under some conditions, reported
by QEMU users
- fix a potential leak when disabling quotas while some extent tracking
work can still happen
- in zoned mode handle unexpected change of zone write pointer in
RAID1-like block groups, turn the zones to read-only
* tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between direct IO write and fsync when using same fd
btrfs: zoned: handle broken write pointer on zones
btrfs: qgroup: don't use extent changeset when not needed
|
|
Pull smb server fixes from Steve French:
- Fix crash in session setup
- Fix locking bug
- Improve access bounds checking
* tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Unlock on in ksmbd_tcp_set_interfaces()
ksmbd: unset the binding mark of a reused connection
smb: Annotate struct xattr_smb_acl with __counted_by()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes, 15 of which are cc:stable.
Mostly MM, no identifiable theme. And a few nilfs2 fixups"
* tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n
mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area
mailmap: update entry for Jan Kuliga
codetag: debug: mark codetags for poisoned page as empty
mm/memcontrol: respect zswap.writeback setting from parent cg too
scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum
Revert "mm: skip CMA pages when they are not available"
maple_tree: remove rcu_read_lock() from mt_validate()
kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
nilfs2: fix state management in error path of log writing function
nilfs2: fix missing cleanup on rollforward recovery error
nilfs2: protect references to superblock parameters exposed in sysfs
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
userfaultfd: fix checks for huge PMDs
mm: vmalloc: ensure vmap_block is initialised before adding to queue
selftests: mm: fix build errors on armhf
|
|
syzbot reports that lzo1x_1_do_compress is using uninit-value:
=====================================================
BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178
...
Uninit was stored to memory at:
ea_put fs/jfs/xattr.c:639 [inline]
...
Local variable ea_buf created at:
__jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662
__jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934
=====================================================
The reason is ea_buf->new_ea is not initialized properly.
Fix this by using memset to empty its content at the beginning
in ea_get().
Reported-by: syzbot+02341e0daa42a15ce130@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=02341e0daa42a15ce130
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.
To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.
Some extra links and examples:
- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support
- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support
- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap
- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmap
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
It is not possible with the current fuse code, but let's protect ourselves
from regressions in the future.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This is needed to properly clear suid/sgid.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
RENAME_WHITEOUT is a special case of ->rename
and we need to take idmappings into account there.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
It's just a matter of adjusting a permission check condition
for S_ISGID flag. All the rest is already handled in the generic
VFS code.
Notice that this permission check is the analog of what
we have in posix_acl_update_mode() generic helper, but
fuse doesn't use this helper as on the kernel side we don't
care about ensuring that POSIX ACL and CHMOD permissions are in sync
as it is a responsibility of a userspace daemon to handle that.
For the same reason we don't have a calls to posix_acl_chmod(),
while most of other filesystem do.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We don't need to have idmap in the __fuse_get_acl as we don't
have any use for it.
In the current POSIX ACL implementation, idmapped mounts are
taken into account on the userspace/kernel border
(see vfs_set_acl_idmapped_mnt() and vfs_posix_acl_to_xattr()).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Need to translate uid and gid in case of chown(2).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We only cover the case when "default_permissions" flag
is used. A reason for that is that otherwise all the permission
checks are done in the userspace and we have to deal with
VFS idmapping in the userspace (which is bad), alternatively
we have to provide the userspace with idmapped req->in.h.uid/req->in.h.gid
which is also not align with VFS idmaps philosophy.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We have to:
- pass an idmapping to the generic_fillattr()
to properly handle UIG/GID mapping for the userspace.
- pass -/- to fuse_fillattr() (analog of generic_fillattr() in fuse).
Difference between these two is that generic_fillattr() takes all the
stat() data from the inode directly, while fuse_fillattr() codepath takes a
fresh data just from the userspace reply on the FUSE_GETATTR request.
In some cases we can just pass &nop_mnt_idmap, because idmapping won't be
used in these codepaths. For example, when 3rd argument of
fuse_do_getattr() is NULL then idmap argument is not used.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We have all the infrastructure in place, we just need
to pass an idmapping here.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We don't need to remap parent_gid, but have to adjust
group membership checks and take idmapping into account.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.
No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.
Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.
No functional changes intended.
Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Right now we determine if filesystem support vfs idmappings or not basing
on the FS_ALLOW_IDMAP flag presence. This "static" way works perfecly well
for local filesystems like ext4, xfs, btrfs, etc. But for network-like
filesystems like fuse, cephfs this approach is not ideal, because sometimes
proper support of vfs idmaps requires some extensions for the on-wire
protocol, which implies that changes have to be made not only in the Linux
kernel code but also in the 3rd party components like libfuse, cephfs MDS
server and so on.
We have seen that issue during our work on cephfs idmapped mounts [1] with
Christian, but right now I'm working on the idmapped mounts support for
fuse/virtiofs and I think that it is a right time for this extension.
[1] 5ccd8530dd7 ("ceph: handle idmapped mounts in create_request_message()")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Update /proc/consoles output to show 'W' if an nbcon console is
registered. Since the write_thread() callback is mandatory, it
enough just to check if it is an nbcon console.
Also update /proc/consoles output to show 'N' if it is an
nbcon console.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-14-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
fs/proc/consoles.c:78:13: warning: context imbalance in 'c_start'
- wrong count at exit
fs/proc/consoles.c:104:13: warning: context imbalance in 'c_stop'
- unexpected unlock
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-13-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Use the new CONFIG_ARCH_PKEY_BITS to simplify setting these bits
for different architectures.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-4-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Convert x86 to use PG_arch_2 instead of PG_uncached and remove
PG_uncached.
Link: https://lkml.kernel.org/r/20240821193445.2294269-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This flag has similar constraints to PG_owner_priv_1 -- it is ignored by
core code, and is entirely for the use of the code which allocated the
folio. Since the pagecache does not use it, individual filesystems can
use it. The bufferhead code does use it, so filesystems which use the
buffer cache must not use it for another purpose.
Link: https://lkml.kernel.org/r/20240821193445.2294269-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Resolve the awkward "and add one to this opaque constant" test into a
self-documenting inline function.
Link: https://lkml.kernel.org/r/20240821173914.2270383-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Although we have checks to make sure s_stripe is a multiple of cluster
size, in case we accidentally end up with a scenario where this is not
the case, use EXT4_NUM_B2C() so that we don't end up with unexpected
cases where EXT4_B2C(stripe) becomes 0.
Also make the is_stripe_aligned check in regular_allocator a bit more
robust while we are at it. This should ideally have no functional change
unless we have a bug somewhere causing (stripe % cluster_size != 0)
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/e0c0a3b58a40935a1361f668851d041575861411.1725002410.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well.
Reported-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Tested-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Fixes: c3defd99d58c ("ext4: treat stripe in block unit")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/3a493bb503c3598e25dcfbed2936bb2dff3fece7.1725002410.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Co-developed-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru
Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This kinda revert the commit 56d35a4cd13e("ext4: Fix dirtying of
journalled buffers in data=journal mode") made by Jan 14 years ago,
since the do_get_write_access() itself can deal with the extra
unexpected buf dirting things in a proper way now.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240830053739.3588573-5-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
On an old kernel version(4.19, ext3, data=journal, pagesize=64k),
an assertion failure will occasionally be triggered by the line below:
-----------
jbd2_journal_commit_transaction
{
...
J_ASSERT_BH(bh, !buffer_dirty(bh));
/*
* The buffer on BJ_Forget list and not jbddirty means
...
}
-----------
The same condition may also be applied to the lattest kernel version.
When blocksize < pagesize and we truncate a file, there can be buffers in
the mapping tail page beyond i_size. These buffers will be filed to
transaction's BJ_Forget list by ext4_journalled_invalidatepage() during
truncation. When the transaction doing truncate starts committing, we can
grow the file again. This calls __block_write_begin() which allocates new
blocks under these buffers in the tail page we go through the branch:
if (buffer_new(bh)) {
clean_bdev_bh_alias(bh);
if (folio_test_uptodate(folio)) {
clear_buffer_new(bh);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
continue;
}
...
}
Hence buffers on BJ_Forget list of the committing transaction get marked
dirty and this triggers the jbd2 assertion.
Teach ext4_block_write_begin() to properly handle files with data
journalling by avoiding dirtying them directly. Instead of
folio_zero_new_buffers() we use ext4_journalled_zero_new_buffers() which
takes care of handling journalling. We also don't need to mark new uptodate
buffers as dirty in ext4_block_write_begin(). That will be either done
either by block_commit_write() in case of success or by
folio_zero_new_buffers() in case of failure.
Reported-by: Baolin Liu <liubaolin@kylinos.cn>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240830053739.3588573-4-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Using __block_write_begin() make it inconvenient to journal the
user data dirty process. We can't tell the block layer maintainer,
‘Hey, we want to trace the dirty user data in ext4, can we add some
special code for ext4 in __block_write_begin?’:P
So use ext4_block_write_begin() instead.
The two functions are basically doing the same thing except for the
fscrypt related code. Remove the unnecessary #ifdef since
fscrypt_inode_uses_fs_layer_crypto() returns false (and it's known at
compile time) when !CONFIG_FS_ENCRYPTION.
And hoist the ext4_block_write_begin so that it can be used in other
files.
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240830053739.3588573-3-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
For new uptodate buffers we also need to call write_end_fn() to persist the
uptodate content, similarly as folio_zero_new_buffers() does it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240830053739.3588573-2-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Any extending write for ext4 requires the inode to be placed on the
orphan list before the actual write. In addition, the inode can be
actually removed from the orphan list only after all writes are
completed. Otherwise we'd leave allocated blocks beyond i_disksize if we
could not copy all the data into allocated block and e2fsck would
complain.
Currently, direct IO and buffered IO comply with this logic(buffered
IO will truncate all overflow allocated blocks that has not been
written successfully, and direct IO will truncate all allocated blocks
when error occurs). However, dax write break this since dax write will
remove the inode from the orphan list by calling
ext4_handle_inode_extension unconditionally during extending write.
We add a argument to help determine does we do a fully write, and for
the case not fully write, we leave the inode on the orphan list, and the
latter ext4_inode_extension_cleanup will help us truncate the overflow
allocated blocks, and then remove the inode from the orphan list.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240829110222.126685-1-yangerkun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit 985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash") properly rejects volumes where
s_def_hash_version is set to DX_HASH_SIPHASH, but the check and the
error message should not look into casefold setup - a filesystem should
never have DX_HASH_SIPHASH as the default hash. Fix it and, since we
are there, move the check to ext4_hash_info_init.
Fixes:985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/87jzg1en6j.fsf_-_@mailhost.krisman.be
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Save an indentation level in ext4_ext_create_new_leaf() by removing
unnecessary 'else'. Besides, the variable 'ee_block' is declared to
avoid line breaks. No functional changes.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240822023545.1994557-26-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4_find_extent() can update the extent path so that it does not have
to allocate and free the path repeatedly, thus reducing the consumption of
memory allocation and freeing in the following functions:
ext4_ext_clear_bb
ext4_ext_replay_set_iblocks
ext4_fc_replay_add_range
ext4_fc_set_bitmaps_and_counters
No functional changes. Note that ext4_find_extent() does not support error
pointers, so in this case set path to NULL first.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-25-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4_find_extent() can update the extent path so it doesn't have to
allocate and free path repeatedly, thus reducing the consumption of memory
allocation and freeing in ext4_swap_extents().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-24-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in convert_initialized_extent(), the following is
done here:
* Free the extents path when an error is encountered.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-23-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_ext_handle_unwritten_extents(), the
following is done here:
* Free the extents path when an error is encountered.
* The 'allocated' is changed from passing a value to passing an address.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-22-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_ext_convert_to_initialized(), the following
is done here:
* Free the extents path when an error is encountered.
* Its caller needs to update ppath if it uses ppath.
* The 'allocated' is changed from passing a value to passing an address.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-21-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_convert_unwritten_extents_endio(), the
following is done here:
* Free the extents path when an error is encountered.
* Its caller needs to update ppath if it uses ppath.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-20-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_split_convert_extents(), the following is
done here:
* Its caller needs to update ppath if it uses ppath.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-19-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_split_extent(), the following is done here:
* The 'allocated' is changed from passing a value to passing an address.
* Its caller needs to update ppath if it uses ppath.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-18-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_force_split_extent_at(), the following is
done here:
* Free the extents path when an error is encountered.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-17-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_split_extent_at(), the following is done
here:
* Free the extents path when an error is encountered.
* Its caller needs to update ppath if it uses ppath.
* Teach ext4_ext_show_leaf() to skip error pointer.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-16-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_ext_insert_extent(), the following is done
here:
* Free the extents path when an error is encountered.
* Its caller needs to update ppath if it uses ppath.
* Free path when npath is used, free npath when it is not used.
* The got_allocated_blocks label in ext4_ext_map_blocks() does not
update err now, so err is updated to 0 if the err returned by
ext4_ext_search_right() is greater than 0 and is about to enter
got_allocated_blocks.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-15-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The use of path and ppath is now very confusing, so to make the code more
readable, pass path between functions uniformly, and get rid of ppath.
To get rid of the ppath in ext4_ext_create_new_leaf(), the following is
done here:
* Free the extents path when an error is encountered.
* Its caller needs to update ppath if it uses ppath.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-14-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
