| Age | Commit message (Collapse) | Author |
|---|
|
The logic here is better expressed with a switch statement.
While we're here, CLOSED stateids (or stateids of an unkown type--which
would indicate a server bug) should probably return nfserr_bad_stateid,
though this behavior shouldn't affect any non-buggy client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Make sure the client gives us an adequate backchannel.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Negotiation of the 4.1 session forechannel attributes is a mess. Fix:
- Move it all into check_forechannel_attrs instead of spreading
it between that, alloc_session, and init_forechannel_attrs.
- set a minimum "slotsize" so that our drc memory limits apply
even for small maxresponsesize_cached. This also fixes some
bugs when slotsize becomes <= 0.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pass this struct by reference, not by value, and return an error instead
of a boolean to allow for future additions.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A nasty bug in fs/namespace.c caught by Andrey + a couple of less
serious unpleasantness - ecryptfs misc device playing hopeless games
with try_module_get() and palinfo procfs support being... not quite
correctly done, to be polite."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mnt: release locks on error path in do_loopback
palinfo fixes
procfs: add proc_remove_subtree()
ecryptfs: close rmmod race
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* serialize the call of ->release() on per-pdeo mutex
* don't remove pdeo from per-pde list until we are through with it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* leave ->proc_fops alone; make ->pde_users negative instead
* trim pde_opener
* move relevant code in fs/proc/inode.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Switch huge if-statement in __proc_file_read() around. This then puts the
single line loop break immediately after the if-statement and allows us to
de-indent the huge comment and make it take fewer lines. The code following
the if-statement then follows naturally from the call to dp->read_proc().
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Kill create_proc_entry() in favour of create_proc_read_entry(), proc_create()
and proc_create_data().
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Same as single_open(), but preallocates the buffer of given size.
Doesn't make any sense for sizes up to PAGE_SIZE and doesn't make
sense if output of show() exceeds PAGE_SIZE only rarely - seq_read()
will take care of growing the buffer and redoing show(). If you
_know_ that it will be large, it might make more sense to look into
saner iterator, rather than go with single-shot one. If that's
impossible, single_open_size() might be for you.
Again, don't use that without a good reason; occasionally that's really
the best way to go, but very often there are better solutions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just have it pinned in dcache all along and let procfs ->kill_sb()
drop it before kill_anon_super().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
and rename __free_pipe_info() to free_pipe_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
not used anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's used only as a flag to distinguish normal pipes/FIFOs from the
internal per-task one used by file-to-file splice. And pipe->files
would work just as well for that purpose...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
fs/pipe.c file_operations methods *know* that pipe is not an internal one;
no need to check pipe->inode for those callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simplify get_pipe_info(), while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
now it can be done - put mutex into pipe_inode_info, use it instead
of ->i_mutex
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* new field - pipe->files; number of struct file over that pipe (all
sharing the same inode, of course); protected by inode->i_lock.
* pipe_release() decrements pipe->files, clears inode->i_pipe when
if the counter has reached 0 (all under ->i_lock) and, in that case,
frees pipe after having done pipe_unlock()
* fifo_open() starts with grabbing ->i_lock, and either bumps pipe->files
if ->i_pipe was non-NULL or allocates a new pipe (dropping and regaining
->i_lock) and rechecks ->i_pipe; if it's still NULL, inserts new pipe
there, otherwise bumps ->i_pipe->files and frees the one we'd allocated.
At that point we know that ->i_pipe is non-NULL and won't go away, so
we can do pipe_lock() on it and proceed as we used to. If we end up
failing, decrement pipe->files and if it reaches 0 clear ->i_pipe and
free the sucker after pipe_unlock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* use the fact that file_inode(file)->i_pipe doesn't change
while the file is opened - no locks needed to access that.
* switch to pipe_lock/pipe_unlock where it's easy to do
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and take to fs/read_write.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... so that writev(2) doesn't miss it. Get rid of hpfs_file_write().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
look for file_capable() in there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and provide namespace_lock() as a trivial wrapper;
switch to those two consistently.
Result is patterned after rtnl_lock/rtnl_unlock pair.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
which allows to kill the last argument of umount_tree() and make release_mounts()
static.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... it's always &unmounted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
global list of release_mounts() fodder, protected by namespace_sem;
eventually, all umount_tree() callers will use it as kill list.
Helper picking the contents of that list, releasing namespace_sem
and doing release_mounts() on what it got.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
do_loopback calls lock_mount(path) and forget to unlock_mount
if clone_mnt or copy_mnt fails.
[ 77.661566] ================================================
[ 77.662939] [ BUG: lock held when returning to user space! ]
[ 77.664104] 3.9.0-rc5+ #17 Not tainted
[ 77.664982] ------------------------------------------------
[ 77.666488] mount/514 is leaving the kernel with locks still held!
[ 77.668027] 2 locks held by mount/514:
[ 77.668817] #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [<ffffffff811cca22>] lock_mount+0x32/0xe0
[ 77.671755] #1: (&namespace_sem){+++++.}, at: [<ffffffff811cca3a>] lock_mount+0x4a/0xe0
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
just what it sounds like; do that only to procfs subtrees you've
created - doing that to something shared with another driver is
not only antisocial, but might cause interesting races with
proc_create() and its ilk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch introduces an UAPI header for the SCTP protocol,
so that we can facilitate the maintenance and development of
user land applications or libraries, in particular in terms
of header synchronization.
To not break compatibility, some fragments from lksctp-tools'
netinet/sctp.h have been carefully included, while taking care
that neither kernel nor user land breaks, so both compile fine
with this change (for lksctp-tools I tested with the old
netinet/sctp.h header and with a newly adapted one that includes
the uapi sctp header). lksctp-tools smoke test run through
successfully as well in both cases.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't hold the NFSv4 sequence id while we check for open permission.
The call to ACCESS may block due to reboot recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Estimate of 27 credits for allocation of a block in extent based inode
is unnecessarily high. We can easily argue 20 is enough.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Improve mb_free_blocks speed by clearing entire range at once instead
of iterating over each bit. Freeing block-by-block also makes buddy
bitmap subtree flip twice making most of the work a no-op. Very few
bits in buddy bitmap require change, e.g. freeing entire group is a 1
bit flip only. As a result, releasing blocks of 60G file now takes
5ms instead of 2.7s. This is especially good for non-preemptive
kernels as there is no rescheduling during release.
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
