| Age | Commit message (Collapse) | Author |
|---|
|
Add an __iomap_get_folio() helper as the counterpart of the existing
__iomap_put_folio() helper. Use the new helper in iomap_write_begin().
Not a functional change.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Change the iomap ->page_prepare() handler to get and return a locked
folio instead of doing that in iomap_write_begin(). This allows to
recover from out-of-memory situations in ->page_prepare(), which
eliminates the corresponding error handling code in iomap_write_begin().
The ->put_folio() handler now also isn't called with NULL as the folio
value anymore.
Filesystems are expected to use the iomap_get_folio() helper for getting
locked folios in their ->page_prepare() handlers.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add an iomap_get_folio() helper that gets a folio reference based on
an iomap iterator and an offset into the address space. Use it in
iomap_write_begin().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The ->page_done() handler in struct iomap_page_ops is now somewhat
misnamed in that it mainly deals with unlocking and putting a folio, so
rename it to ->put_folio().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When an iomap defines a ->page_done() handler in its page_ops, delegate
unlocking the folio and putting the folio reference to that handler.
This allows to fix a race between journaled data writes and folio
writeback in gfs2: before this change, gfs2_iomap_page_done() was called
after unlocking the folio, so writeback could start writing back the
folio's buffers before they could be marked for writing to the journal.
Also, try_to_free_buffers() could free the buffers before
gfs2_iomap_page_done() was done adding the buffers to the current
current transaction. With this change, gfs2_iomap_page_done() adds the
buffers to the current transaction while the folio is still locked, so
the problems described above can no longer occur.
The only current user of ->page_done() is gfs2, so other filesystems are
not affected. To catch out any out-of-tree users, switch from a page to
a folio in ->page_done().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add an __iomap_put_folio() helper to encapsulate unlocking the folio,
calling ->page_done(), and putting the folio. Use the new helper in
iomap_write_begin() and iomap_write_end().
This effectively doesn't change the way the code works, but prepares for
successive improvements.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One minor fix for a KCSAN report"
* tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: initialize fsdata in affs_truncate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two patches fixes issues reported by syzbot, one fixes a missing
`domain_id` mount option in documentation and a minor cleanup:
- Fix wrong iomap->length calculation post EOF, which could cause a
WARN_ON in iomap_iter_done() (Siddh)
- Fix improper kvcalloc() use with __GFP_NOFAIL (me)
- Add missing `domain_id` mount option in documentation (Jingbo)
- Clean up fscache option parsing (Jingbo)"
* tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up parsing of fscache related options
erofs: add documentation for 'domain_id' mount option
erofs: fix kvcalloc() misuse with __GFP_NOFAIL
erofs/zmap.c: Fix incorrect offset calculation
|
|
Fix this by initializing rc to 0 as cache_refresh_path() would not set
it in case of success.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301190004.bEHvbKG6-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Project ids are only settable filesystem wide in the initial namespace.
They don't take the mount's idmapping into account.
Note, that after we converted everything over to struct mnt_idmap
mistakes such as the one here aren't possible anymore as struct
mnt_idmap cannot be passed to functions that operate on k{g,u}ids.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
lookup_cache_entry() might return an error different than -ENOENT
(e.g. from ->char2uni), so handle those as well in
cache_refresh_path().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The logic for creating or updating a cache entry in __refresh_tcon()
could be simply done with cache_refresh_path(), so use it instead.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid contention while updating dfs target hints. This should be
perfectly fine to update them under shared locks.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Simply downgrade the write lock on cache updates from
cache_refresh_path() and avoid unnecessary re-lookup in
dfs_cache_find().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid getting DFS referral from an exclusive lock in
cache_refresh_path() because the tcon IPC used for getting the
referral could be disconnected and thus causing a deadlock as shown
below:
task A task B
====== ======
cifs_demultiplex_thread() dfs_cache_find()
cifs_handle_standard() cache_refresh_path()
reconnect_dfs_server() down_write()
dfs_cache_noreq_find() get_dfs_referral()
down_read() <- deadlock smb2_get_dfs_refer()
SMB2_ioctl()
cifs_send_recv()
compound_send_recv()
wait_for_response()
where task A cannot wake up task B because it is blocked on
down_read() due to the exclusive lock held in cache_refresh_path() and
therefore not being able to make progress.
Fixes: c9f711039905 ("cifs: keep referral server sessions alive")
Reviewed-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix recently introduced use-after-free bugs
* tag 'nfsd-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: replace delayed_work with work_struct for nfsd_client_shrinker
NFSD: register/unregister of nfsd-client shrinker at nfsd startup/shutdown time
NFSD: fix use-after-free in nfsd4_ssc_setup_dul()
|
|
Since commit 0f5b2c69a4cb ("efi: vars: Remove deprecated 'efivars' sysfs
interface") and the removal of the sysfs interface there are no users of
the efivars kobject.
Drop the kobject argument from efivars_register() and add a new
efivar_is_available() helper in favour of the old efivars_kobject().
Note that the new helper uses the prefix 'efivar' (i.e. without an 's')
for consistency with efivar_supports_writes() and the rest of the
interface (except the registration functions).
For the benefit of drivers with optional EFI support, also provide a
dummy implementation of efivar_is_available().
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"21 hotfixes. Thirteen of these address pre-6.1 issues and hence have
the cc:stable tag"
* tag 'mm-hotfixes-stable-2023-01-16-15-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
init/Kconfig: fix typo (usafe -> unsafe)
nommu: fix split_vma() map_count error
nommu: fix do_munmap() error path
nommu: fix memory leak in do_mmap() error path
MAINTAINERS: update Robert Foss' email address
proc: fix PIE proc-empty-vm, proc-pid-vm tests
mm: update mmap_sem comments to refer to mmap_lock
include/linux/mm: fix release_pages_arg kernel doc comment
lib/win_minmax: use /* notation for regular comments
kasan: mark kasan_kunit_executing as static
nilfs2: fix general protection fault in nilfs_btree_insert()
Docs/admin-guide/mm/zswap: remove zsmalloc's lack of writeback warning
mm/hugetlb: pre-allocate pgtable pages for uffd wr-protects
hugetlb: unshare some PMDs when splitting VMAs
mm: fix vma->anon_name memory leak for anonymous shmem VMAs
mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE
mm/MADV_COLLAPSE: don't expand collapse when vm_end is past requested end
mm/userfaultfd: enable writenotify while userfaultfd-wp is enabled for a VMA
mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
mm/hugetlb: fix uffd-wp handling for migration entries in hugetlb_change_protection()
...
|
|
If we have one task trying to start the quota rescan worker while another
one is trying to disable quotas, we can end up hitting a race that results
in the quota rescan worker doing a NULL pointer dereference. The steps for
this are the following:
1) Quotas are enabled;
2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan().
It calls qgroup_rescan_init() which returns 0 (success) and then joins a
transaction and commits it;
3) Task B calls the quota disable ioctl and enters btrfs_quota_disable().
It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls
btrfs_qgroup_wait_for_completion(), which returns immediately since the
rescan worker is not yet running.
Then it starts a transaction and locks fs_info->qgroup_ioctl_lock;
4) Task A queues the rescan worker, by calling btrfs_queue_work();
5) The rescan worker starts, and calls rescan_should_stop() at the start
of its while loop, which results in 0 iterations of the loop, since
the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by
task B at step 3);
6) Task B sets fs_info->quota_root to NULL;
7) The rescan worker tries to start a transaction and uses
fs_info->quota_root as the root argument for btrfs_start_transaction().
This results in a NULL pointer dereference down the call chain of
btrfs_start_transaction(). The stack trace is something like the one
reported in Link tag below:
general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: btrfs-qgroup-rescan btrfs_work_helper
RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564
Code: 48 89 fb 48 (...)
RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206
RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d
R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402
btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
So fix this by having the rescan worker function not attempt to start a
transaction if it didn't do any rescan work.
Reported-by: syzbot+96977faa68092ad382c4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000e5454b05f065a803@google.com/
Fixes: e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During lseek, for SEEK_DATA and SEEK_HOLE modes, we access the disk_bytenr
of an extent without checking its type. However inline extents have their
data starting the offset of the disk_bytenr field, so accessing that field
when we have an inline extent can result in either of the following:
1) Interpret the inline extent's data as a disk_bytenr value;
2) In case the inline data is less than 8 bytes, we access part of some
other item in the leaf, or unused space in the leaf;
3) In case the inline data is less than 8 bytes and the extent item is
the first item in the leaf, we can access beyond the leaf's limit.
So fix this by not accessing the disk_bytenr field if we have an inline
extent.
Fixes: b6e833567ea1 ("btrfs: make hole and data seeking a lot more efficient")
Reported-by: Matthias Schoepfer <matthias.schoepfer@googlemail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216908
Link: https://lore.kernel.org/linux-btrfs/7f25442f-b121-2a3a-5a3d-22bcaae83cd4@leemhuis.info/
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
write_one_page is an awkward interface that expects the page locked and
->writepage to be implemented. Replace that by zeroing the signature
bytes and synchronize the block device page using the proper bdev
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_scratch_superblocks open codes scratching super block of a
non-zoned super block. Split the code to read, zero and write the
superblock for regular devices into a separate helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Another batch of fixes, dealing with fallouts from 6.1 reported by
users:
- tree-log fixes:
- fix directory logging due to race with concurrent index key
deletion
- fix missing error handling when logging directory items
- handle case of conflicting inodes being added to the log
- remove transaction aborts for not so serious errors
- fix qgroup accounting warning when rescan can be started at time
with temporarily disable accounting
- print more specific errors to system log when device scan ioctl
fails
- disable space overcommit for ZNS devices, causing heavy performance
drop"
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not abort transaction on failure to update log root
btrfs: do not abort transaction on failure to write log tree when syncing log
btrfs: add missing setup of log for full commit at add_conflicting_inode()
btrfs: fix directory logging due to race with concurrent index key deletion
btrfs: fix missing error handling when logging directory items
btrfs: zoned: enable metadata over-commit for non-ZNS setup
btrfs: qgroup: do not warn on record without old_roots populated
btrfs: add extra error messages to cover non-ENOMEM errors from device_add_list()
|
|
... to avoid the mess of conditional preprocessing as we are continually
adding fscache related mount options.
Reviewd-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230112065431.124926-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Propagate errors from ext2_prepare_chunk to the callers and handle them
there. While touching the prototype also turn update_times into a bool
from the current int used as bool.
[JK: fixed up error recovery path in ext2_rename()]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230116085205.2342975-1-hch@lst.de>
|
|
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.
Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.
Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
Pull cifs fixes from Steve French:
- memory leak and double free fix
- two symlink fixes
- minor cleanup fix
- two smb1 fixes
* tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix uninitialized memory read for smb311 posix symlink create
cifs: fix potential memory leaks in session setup
cifs: do not query ifaces on smb1 mounts
cifs: fix double free on failed kerberos auth
cifs: remove redundant assignment to the variable match
cifs: fix file info setting in cifs_open_file()
cifs: fix file info setting in cifs_query_path_info()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
|
If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.
Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When syncing a log, if we fail to update a log root in the log root tree,
we are aborting the transaction if the failure was not -ENOSPC. This is
excessive because there is a chance that a transaction commit can succeed,
and therefore avoid to turn the filesystem into RO mode. All we need to be
careful about is to mark the log for a full commit, which we already do,
to make sure no one commits a super block pointing to an outdated log root
tree.
So don't abort the transaction if we fail to update a log root in the log
root tree, and log an error if the failure is not -ENOSPC, so that it does
not go completely unnoticed.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When syncing the log, if we fail to write log tree extent buffers, we mark
the log for a full commit and abort the transaction. However we don't need
to abort the transaction, all we really need to do is to make sure no one
can commit a superblock pointing to new log tree roots. Just because we
got a failure writing extent buffers for a log tree, it does not mean we
will also fail to do a transaction commit.
One particular case is if due to a bug somewhere, when writing log tree
extent buffers, the tree checker detects some corruption and the writeout
fails because of that. Aborting the transaction can be very disruptive for
a user, specially if the issue happened on a root filesystem. One example
is the scenario in the Link tag below, where an isolated corruption on log
tree leaves was causing transaction aborts when syncing the log.
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging conflicting inodes, if we reach the maximum limit of inodes,
we return BTRFS_LOG_FORCE_COMMIT to force a transaction commit. However
we don't mark the log for full commit (with btrfs_set_log_full_commit()),
which means that once we leave the log transaction and before we commit
the transaction, some other task may sync the log, which is incomplete
as we have not logged all conflicting inodes, leading to some inconsistent
in case that log ends up being replayed.
So also call btrfs_set_log_full_commit() at add_conflicting_inode().
Fixes: e09d94c9e448 ("btrfs: log conflicting inodes without holding log mutex of the initial inode")
CC: stable@vger.kernel.org # 6.1
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Sometimes we log a directory without holding its VFS lock, so while we
logging it, dir index entries may be added or removed. This typically
happens when logging a dentry from a parent directory that points to a
new directory, through log_new_dir_dentries(), or when while logging
some other inode we also need to log its parent directories (through
btrfs_log_all_parents()).
This means that while we are at log_dir_items(), we may not find a dir
index key we found before, because it was deleted in the meanwhile, so
a call to btrfs_search_slot() may return 1 (key not found). In that case
we return from log_dir_items() with a success value (the variable 'err'
has a value of 0). This can lead to a few problems, specially in the case
where the variable 'last_offset' has a value of (u64)-1 (and it's
initialized to that when it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned 1, we end up
returning from log_dir_items() with success (0) and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
So fix this by making log_dir_items() move on to the next dir index key
if it does not find the one it was looking for.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory, at log_dir_items(), if we get an error when
attempting to search the subvolume tree for a dir index item, we end up
returning 0 (success) from log_dir_items() because 'err' is left with a
value of 0.
This can lead to a few problems, specially in the case the variable
'last_offset' has a value of (u64)-1 (and it's initialized to that when
it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned an error, we end up
returning without any error from log_dir_items() and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
Fix this by setting 'err' to the value of 'ret' in case
btrfs_search_slot() or btrfs_previous_item() returned an error. That will
result in falling back to a full transaction commit.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since nfsd4_state_shrinker_count always calls mod_delayed_work with
0 delay, we can replace delayed_work with work_struct to save some
space and overhead.
Also add the call to cancel_work after unregister the shrinker
in nfs4_state_shutdown_net.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently the nfsd-client shrinker is registered and unregistered at
the time the nfsd module is loaded and unloaded. The problem with this
is the shrinker is being registered before all of the relevant fields
in nfsd_net are initialized when nfsd is started. This can lead to an
oops when memory is low and the shrinker is called while nfsd is not
running.
This patch moves the register/unregister of nfsd-client shrinker from
module load/unload time to nfsd startup/shutdown time.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If signal_pending() returns true, schedule_timeout() will not be executed,
causing the waiting task to remain in the wait queue.
Fixed by adding a call to finish_wait(), which ensures that the waiting
task will always be removed from the wait queue.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If nilfs2 reads a corrupted disk image and tries to reads a b-tree node
block by calling __nilfs_btree_get_block() against an invalid virtual
block address, it returns -ENOENT because conversion of the virtual block
address to a disk block address fails. However, this return value is the
same as the internal code that b-tree lookup routines return to indicate
that the block being searched does not exist, so functions that operate on
that b-tree may misbehave.
When nilfs_btree_insert() receives this spurious 'not found' code from
nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was
successful and continues the insert operation using incomplete lookup path
data, causing the following crash:
general protection fault, probably for non-canonical address
0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
...
RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline]
RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline]
RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238
Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89
ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c
28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02
...
Call Trace:
<TASK>
nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline]
nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147
nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101
__block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991
__block_write_begin fs/buffer.c:2041 [inline]
block_write_begin+0x93/0x1e0 fs/buffer.c:2102
nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
__generic_file_write_iter+0x176/0x400 mm/filemap.c:3900
generic_file_write_iter+0xab/0x310 mm/filemap.c:3932
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
This patch fixes the root cause of this problem by replacing the error
code that __nilfs_btree_get_block() returns on block address conversion
failure from -ENOENT to another internal code -EINVAL which means that the
b-tree metadata is corrupted.
By returning -EINVAL, it propagates without glitches, and for all relevant
b-tree operations, functions in the upper bmap layer output an error
message indicating corrupted b-tree metadata via
nilfs_bmap_convert_error(), and code -EIO will be eventually returned as
it should be.
Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com
Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we don't enable writenotify when enabling userfaultfd-wp on a
shared writable mapping (for now only shmem and hugetlb). The consequence
is that vma->vm_page_prot will still include write permissions, to be set
as default for all PTEs that get remapped (e.g., mprotect(), NUMA hinting,
page migration, ...).
So far, vma->vm_page_prot is assumed to be a safe default, meaning that we
only add permissions (e.g., mkwrite) but not remove permissions (e.g.,
wrprotect). For example, when enabling softdirty tracking, we enable
writenotify. With uffd-wp on shared mappings, that changed. More details
on vma->vm_page_prot semantics were summarized in [1].
This is problematic for uffd-wp: we'd have to manually check for a uffd-wp
PTEs/PMDs and manually write-protect PTEs/PMDs, which is error prone.
Prone to such issues is any code that uses vma->vm_page_prot to set PTE
permissions: primarily pte_modify() and mk_pte().
Instead, let's enable writenotify such that PTEs/PMDs/... will be mapped
write-protected as default and we will only allow selected PTEs that are
definitely safe to be mapped without write-protection (see
can_change_pte_writable()) to be writable. In the future, we might want
to enable write-bit recovery -- e.g., can_change_pte_writable() -- at more
locations, for example, also when removing uffd-wp protection.
This fixes two known cases:
(a) remove_migration_pte() mapping uffd-wp'ed PTEs writable, resulting
in uffd-wp not triggering on write access.
(b) do_numa_page() / do_huge_pmd_numa_page() mapping uffd-wp'ed PTEs/PMDs
writable, resulting in uffd-wp not triggering on write access.
Note that do_numa_page() / do_huge_pmd_numa_page() can be reached even
without NUMA hinting (which currently doesn't seem to be applicable to
shmem), for example, by using uffd-wp with a PROT_WRITE shmem VMA. On
such a VMA, userfaultfd-wp is currently non-functional.
Note that when enabling userfaultfd-wp, there is no need to walk page
tables to enforce the new default protection for the PTEs: we know that
they cannot be uffd-wp'ed yet, because that can only happen after enabling
uffd-wp for the VMA in general.
Also note that this makes mprotect() on ranges with uffd-wp'ed PTEs not
accidentally set the write bit -- which would result in uffd-wp not
triggering on later write access. This commit makes uffd-wp on shmem
behave just like uffd-wp on anonymous memory in that regard, even though,
mixing mprotect with uffd-wp is controversial.
[1] https://lkml.kernel.org/r/92173bad-caa3-6b43-9d1e-9a471fdbc184@redhat.com
Link: https://lkml.kernel.org/r/20221209080912.7968-1-david@redhat.com
Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ives van Hoorne <ives@codesandbox.io>
Debugged-by: Peter Xu <peterx@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 1e2328e76254 ("fs/nsfs.c: Added ns_match") adds the ns_match()
function with a kernel-doc comment, but the ns parameter was referred to
with ns_common.
Hence, ./scripts/kernel-doc -none fs/nsfs.c warns about it.
Adjust the kernel-doc comment for ns_match() for make W=1 happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As all parameters and return values of the ioctls have the same
representation on both 32bit and 64bit we can reuse the normal ioctl
handler for the compat handler via compat_ptr_ioctl().
All nsfs ioctls return a plain "int" filedescriptor which is a signed
4-byte integer type on both 32bit and 64bit.
The only parameter taken is by NS_GET_OWNER_UID and is a pointer to a
"uid_t" which is a 4-byte unsigned integer type on both 32bit and 64bit.
Fixes: 6786741dbf99 ("nsfs: add ioctl to get an owning user namespace for ns file descriptor")
Reported-by: Karel Zak <kzak@redhat.com>
Link: https://github.com/util-linux/util-linux/pull/1924#issuecomment-1344133656
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adjust the callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Previously, we supported to account iostat io_bytes,
in this patch, it adds to account iostat count and avg_bytes:
time: 1671648667
io_bytes count avg_bytes
[WRITE]
app buffered data: 31 2 15
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
discard_wake and gc_wake have only two values, 0 or 1.
So there is no need to use int type to store them.
BTW, move discard_wake to the end of the
discard_cmd_control structure.
Before:
- sizeof(struct discard_cmd_control): 8392
After move:
- sizeof(struct discard_cmd_control): 8384
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit 1cd2e6d54435 ("f2fs: define MIN_DISCARD_GRANULARITY macro")
introduce it, let's convert to use MIN_DISCARD_GRANULARITY macro.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There is no need to additionally use f2fs_show_injection_info()
to output information. Concatenate time_to_inject() and
__time_to_inject() via a macro. In the new __time_to_inject()
function, pass in the caller function name and parent function.
In this way, we no longer need the f2fs_show_injection_info() function,
and let's remove it.
Suggested-by: Chao Yu <chao@kernel.org>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For example, f2fs_collapse_range(), f2fs_collapse_range(),
f2fs_insert_range(), the functions used in f2fs_fallocate()
are all prefixed with f2fs_, so let's keep the name consistent.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Just cleanup.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
