| Age | Commit message (Collapse) | Author |
|---|
|
f2fs_init_compress_mempool() only initializes the memory pool during
the f2fs module init phase. Let's mark it as __init like any other
function.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The current logic, regardless of whether CONFIG_BLK_DEV_ZONED
is enabled or not, will judge whether discard_unit is SECTION,
when f2fs_sb_has_blkzoned.
In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment
is a path that will never be accessed. At this time, -EINVAL will
be returned in the parse_options function, accompanied by the
message "Zoned block device support is not enabled".
Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We can start freeing cluster page(s) from which compression
is not used. It will get better performance.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The commit 79417d040f4f ("btrfs: zoned: disable metadata overcommit for
zoned") disabled the metadata over-commit to track active zones properly.
However, it also introduced a heavy overhead by allocating new metadata
block groups and/or flushing dirty buffers to release the space
reservations. Specifically, a workload (write only without any sync
operations) worsen its performance from 343.77 MB/sec (v5.19) to 182.89
MB/sec (v6.0).
The performance is still bad on current misc-next which is 187.95 MB/sec.
And, with this patch applied, it improves back to 326.70 MB/sec (+73.82%).
This patch introduces a new fs_info->flag BTRFS_FS_NO_OVERCOMMIT to
indicate it needs to disable the metadata over-commit. The flag is enabled
when a device with max active zones limit is loaded into a file-system.
Fixes: 79417d040f4f ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There are some reports from the mailing list that since v6.1 kernel, the
WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during
rescan:
WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7
RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
Call Trace:
<TASK>
btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? __rseq_handle_notify_resume+0xa9/0x4a0
? mntput_no_expire+0x4a/0x240
? __seccomp_filter+0x319/0x4d0
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x5b/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd9b790d9bf
</TASK>
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if
our qgroup is already in inconsistent state, we will no longer do the
time-consuming backref walk.
This can leave some qgroup records without a valid old_roots ulist.
Normally this is fine, as btrfs_qgroup_account_extents() would also skip
those records if we have NO_ACCOUNTING flag set.
But there is a small window, if we have NO_ACCOUNTING flag set, and
inserted some qgroup_record without a old_roots ulist, but then the user
triggered a qgroup rescan.
During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then
commit current transaction.
And since we have a qgroup_record with old_roots = NULL, we trigger the
WARN_ON() during btrfs_qgroup_account_extents().
[FIX]
Unfortunately due to the introduction of NO_ACCOUNTING flag, the
assumption that every qgroup_record would have its old_roots populated
is no longer correct.
Fix the false alerts and drop the WARN_ON().
Reported-by: Lukas Straub <lukasstraub2@web.de>
Reported-by: HanatoK <summersnow9403@gmail.com>
Fixes: e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1
Link: https://lore.kernel.org/linux-btrfs/2403c697-ddaf-58ad-3829-0335fc89df09@gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
device_add_list()
[BUG]
When test case btrfs/219 (aka, mount a registered device but with a lower
generation) failed, there is not any useful information for the end user
to find out what's going wrong.
The mount failure just looks like this:
# mount -o loop /tmp/219.img2 /mnt/btrfs/
mount: /mnt/btrfs: mount(2) system call failed: File exists.
dmesg(1) may have more information after failed mount system call.
While the dmesg contains nothing but the loop device change:
loop1: detected capacity change from 0 to 524288
[CAUSE]
In device_list_add() we have a lot of extra checks to reject invalid
cases.
That function also contains the regular device scan result like the
following prompt:
BTRFS: device fsid 6222333e-f9f1-47e6-b306-55ddd4dcaef4 devid 1 transid 8 /dev/loop0 scanned by systemd-udevd (3027)
But unfortunately not all errors have their own error messages, thus if
we hit something wrong in device_add_list(), there may be no error
messages at all.
[FIX]
Add errors message for all non-ENOMEM errors.
For ENOMEM, I'd say we're in a much worse situation, and there should be
some OOM messages way before our call sites.
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
locks_inode was turned into a wrapper around file_inode in de2a4a501e71
(Partially revert "locks: fix file locking on overlayfs"). Finish
replacing locks_inode invocations everywhere with file_inode.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.
Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Make sure to free cifs_ses::auth_key.response before allocating it as
we might end up leaking memory in reconnect or mounting.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Users have reported the following error on every 600 seconds
(SMB_INTERFACE_POLL_INTERVAL) when mounting SMB1 shares:
CIFS: VFS: \\srv\share error -5 on ioctl to get interface list
It's supported only by SMB2+, so do not query network interfaces on
SMB1 mounts.
Fixes: 6e1c1c08cdf3 ("cifs: periodically query network interfaces from server")
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Since its use in fs/cramfs is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in fs/cramfs. Instead
of open-coding kmap_local_page() + memcpy(), use memcpy_from_page().
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If CONFIG_ELF_CORE is not set:
fs/coredump.c:835:12: error: ‘dump_emit_page’ defined but not used [-Werror=unused-function]
835 | static int dump_emit_page(struct coredump_params *cprm, struct page *page)
| ^~~~~~~~~~~~~~
Fix this by moving dump_emit_page() inside the existing section
protected by #ifdef CONFIG_ELF_CORE.
Fixes: 06bbaa6dc53cb720 ("[coredump] don't use __kernel_write() on kmap_local_page()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If session setup failed with kerberos auth, we ended up freeing
cifs_ses::auth_key.response twice in SMB2_auth_kerberos() and
sesInfoFree().
Fix this by zeroing out cifs_ses::auth_key.response after freeing it
in SMB2_auth_kerberos().
Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable match is being assigned a value that is never read, it
is being re-assigned a new value later on. The assignment is redundant
and can be removed.
Cleans up clang scan-build warning:
fs/cifs/dfs_cache.c:1302:2: warning: Value stored to 'match' is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
* tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Use set_bit(RQ_DROPME)
Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"
nfsd: fix handling of cached open files in nfsd4_open codepath
|
|
When aops->write_begin() does not initialize fsdata, KMSAN may report
an error passing the latter to aops->write_end().
Fix this by unconditionally initializing fsdata.
Fixes: f2b6a16eb8f5 ("fs: affs convert to new aops")
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull ksmb server fixes from Steve French:
- fix possible infinite loop in socket handler
- fix possible panic in ntlmv2 authentication
- fix error handling on tree connect
* tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix infinite loop in ksmbd_conn_handler_loop()
ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob
ksmbd: send proper error response in smb2_tree_connect()
|
|
As reported by syzbot [1], kvcalloc() cannot work with __GFP_NOFAIL.
Let's use kcalloc() instead.
[1] https://lore.kernel.org/r/0000000000007796bd05f1852ec2@google.com
Reported-by: syzbot+c3729cda01706a04fb98@syzkaller.appspotmail.com
Fixes: fe3e5914e6dc ("erofs: try to leave (de)compressed_pages on stack if possible")
Fixes: 4f05687fd703 ("erofs: introduce struct z_erofs_decompress_backend")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230110074927.41651-1-hsiangkao@linux.alibaba.com
|
|
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6
Reported-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221209102151.311049-1-code@siddh.me
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Now that the needed changes have been made to fs/buffer.c, ext4 is ready
to support the verity feature when the filesystem block size is less
than the page size. So remove the mount-time check that prevented this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-12-ebiggers@kernel.org
|
|
After each filesystem block (as represented by a buffer_head) has been
read from disk by block_read_full_folio(), verify it if needed. The
verification is done on the fsverity_read_workqueue. Also allow reads
of verity metadata past i_size, as required by ext4.
This is needed to support fsverity on ext4 filesystems where the
filesystem block size is less than the page size.
The new code is compiled away when CONFIG_FS_VERITY=n.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-11-ebiggers@kernel.org
|
|
Now that the implementation of FS_IOC_ENABLE_VERITY has changed to not
involve reading back Merkle tree blocks that were previously written,
there is no need for f2fs_readpage_limit() to allow for this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-10-ebiggers@kernel.org
|
|
Now that the implementation of FS_IOC_ENABLE_VERITY has changed to not
involve reading back Merkle tree blocks that were previously written,
there is no need for ext4_readpage_limit() to allow for this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-9-ebiggers@kernel.org
|
|
Make FS_IOC_ENABLE_VERITY support values of
fsverity_enable_arg::block_size other than PAGE_SIZE.
To make this possible, rework build_merkle_tree(), which was reading
data and hash pages from the file and assuming that they were the same
thing as "blocks".
For reading the data blocks, just replace the direct pagecache access
with __kernel_read(), to naturally read one block at a time.
(A disadvantage of the above is that we lose the two optimizations of
hashing the pagecache pages in-place and forcing the maximum readahead.
That shouldn't be very important, though.)
The hash block reads are a bit more difficult to handle, as the only way
to do them is through fsverity_operations::read_merkle_tree_page().
Instead, let's switch to the single-pass tree construction algorithm
that fsverity-utils uses. This eliminates the need to read back any
hash blocks while the tree is being built, at the small cost of an extra
block-sized memory buffer per Merkle tree level. This is probably what
I should have done originally.
Taken together, the above two changes result in page-size independent
code that is also a bit simpler than what we had before.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-8-ebiggers@kernel.org
|
|
Add support for verifying data from verity files whose Merkle tree block
size is less than the page size. The main use case for this is to allow
a single Merkle tree block size to be used across all systems, so that
only one set of fsverity file digests and signatures is needed.
To do this, eliminate various assumptions that the Merkle tree block
size and the page size are the same:
- Make fsverity_verify_page() a wrapper around a new function
fsverity_verify_blocks() which verifies one or more blocks in a page.
- When a Merkle tree block is needed, get the corresponding page and
only verify and use the needed portion. (The Merkle tree continues to
be read and cached in page-sized chunks; that doesn't need to change.)
- When the Merkle tree block size and page size differ, use a bitmap
fsverity_info::hash_block_verified to keep track of which Merkle tree
blocks have been verified, as PageChecked cannot be used directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-7-ebiggers@kernel.org
|
|
In preparation for allowing the Merkle tree block size to differ from
PAGE_SIZE, replace fsverity_hash_page() with fsverity_hash_block(). The
new function is similar to the old one, but it operates on the block at
the given offset in the page instead of on the full page.
(For now, all callers still pass a full page.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-6-ebiggers@kernel.org
|
|
Currently, there is an implementation limit where files can't have more
than 8 Merkle tree levels. With SHA-256 and 4K blocks, this limit is
never reached, since a file would need to be larger than 2**64 bytes to
need 9 levels. However, with SHA-512, 9 levels are needed for files
larger than about 1.15 EB, which is possible on btrfs. Therefore, this
limit technically became reachable when btrfs added fsverity support.
Meanwhile, support for merkle_tree_block_size < PAGE_SIZE will introduce
another implementation limit on file size, resulting from the use of an
in-memory bitmap to track which Merkle tree blocks have been verified.
In any case, currently FS_IOC_ENABLE_VERITY fails with EINVAL when the
file is too large. This is undocumented, and also ambiguous since
EINVAL can mean other things too. Let's change the error code to EFBIG,
which is much clearer, and document it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-5-ebiggers@kernel.org
|
|
Add log_digestsize to struct merkle_tree_params so that it can be used
in verify.c. Also save memory by using u8 for all the log_* fields.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-4-ebiggers@kernel.org
|
|
First, calculate max_ra_pages more efficiently by using the bio size.
Second, calculate the number of readahead pages from the hash page
index, instead of calculating it ahead of time using the data page
index. This ends up being a bit simpler, especially since level 0 is
last in the tree, so we can just limit the readahead to the tree size.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-3-ebiggers@kernel.org
|
|
fs/verity/ isn't consistent with whether Merkle tree block indices are
'unsigned long' or 'u64'. There's no real point to using u64 for them,
though, since (a) a Merkle tree with over ULONG_MAX blocks would only be
needed for a file larger than MAX_LFS_FILESIZE, and (b) for reads, the
status of all Merkle tree blocks has to be tracked in memory.
Therefore, let's make things a bit more efficient on 32-bit systems by
using 'unsigned long[]' for merkle_tree_params::level_start, instead of
'u64[]'. Also, to be extra safe, explicitly check that there aren't
more than ULONG_MAX Merkle tree blocks.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-2-ebiggers@kernel.org
|
|
In cifs_open_file(), @buf must hold a pointer to a cifs_open_info_data
structure which is passed by cifs_nt_open(), so assigning @buf
directly to @fi was obviously wrong.
Fix this by passing a valid FILE_ALL_INFO structure to SMBLegacyOpen()
and CIFS_open(), and then copy the set structure to the corresponding
cifs_open_info_data::fi field with move_cifs_info_to_smb2() helper.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216889
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We missed to set file info when CIFSSMBQPathInfo() returned 0, thus
leaving cifs_open_info_data::fi unset.
Fix this by setting cifs_open_info_data::fi when either
CIFSSMBQPathInfo() or SMBQueryInformation() succeed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216881
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable netype is assigned a value that is never read, the assignment
is redundant the variable can be removed.
Message-Id: <20230105134925.45599-1-colin.i.king@gmail.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.
CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.
Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
There is a spelling mistake in a udf_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230231452.5821-1-colin.i.king@gmail.com>
|
|
kmap_atomic() is deprecated in favor of kmap_local_page(). Therefore,
replace kmap_atomic() with kmap_local_page().
kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only for !PREEMPT_RT kernels).
However, the code within the mapping and un-mapping in ext2_make_empty()
does not depend on the above-mentioned side effects.
Therefore, a mere replacement of the old API with the new one is all it
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221231174205.8492-1-fmdefrancesco@gmail.com>
|
|
When rounding the last extent to blocksize in inode_getblk() we forgot
to update also i_lenExtents to match the new extent length. This
inconsistency can later confuse some assertion checks.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When expanding file for a write into a hole, we were not updating total
length of inode's extents properly. Move the update of i_lenExtents into
udf_do_extend_file() so that both expanding of file by truncate and
expanding of file by writing beyond EOF properly update the length of
extents. As a bonus, we also correctly update the length of extents when
only part of extents can be written.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently we allocate name buffer in directory iterators (struct
udf_fileident_iter) on stack. These structures are relatively large
(some 360 bytes on 64-bit architectures). For udf_rename() which needs
to keep three of these structures in parallel the stack usage becomes
rather heavy - 1536 bytes in total. Allocate the name buffer in the
iterator from heap to avoid excessive stack usage.
Link: https://lore.kernel.org/all/202212200558.lK9x1KW0-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When adding extent to a file fails, so far we've silently squelshed the
error. Make sure to propagate it up properly.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When adding extent describing symlink data fails, make sure to handle
the error properly, propagate it up and free the already allocated
block.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When there is an error when adding extent to the directory to expand it,
make sure to propagate the error up properly. This is not expected to
happen currently but let's make the code more futureproof.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.
CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Remove old directory iteration code that is now unused.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Convert udf_rename() to use new directory iteration code.
Reported-by: syzbot+0eaad3590d65102b9391@syzkaller.appspotmail.com
Reported-by: syzbot+b7fc73213bc2361ab650@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Convert udf_link() to use new directory iteration code for adding entry
into the directory.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Convert udf_mkdir() to new directory iteration code.
Signed-off-by: Jan Kara <jack@suse.cz>
|
