| Age | Commit message (Collapse) | Author |
|---|
|
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
Reported-by: lei lu <llfamsec@gmail.com>
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate
btrfs_qgroup_inherit parameter"), user space tool snapper will fail to
create snapshot using its timeline feature.
[CAUSE]
It turns out that, if using timeline snapper would unconditionally pass
btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0)
for snapshot creation.
In that case, since qgroup is disabled there would be no qgroup 1/0, and
btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole
snapshot creation.
[FIX]
Just skip the check if qgroup is not enabled.
This is to keep the older behavior for user space tools, as if the
kernel behavior changed for user space, it is a regression of kernel.
Thankfully snapper is also fixing the behavior by detecting if qgroup is
running in the first place, so the effect should not be that huge.
Link: https://github.com/openSUSE/snapper/issues/894
Fixes: 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new sysfs path ioctl lets us get the /sys/fs/ path for a given
filesystem in a fs agnostic way, potentially nudging us towards
standarizing some of our reporting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Link: https://lore.kernel.org/r/20240315035308.3563511-4-kent.overstreet@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A user with minimum journal size (1024 blocks these days) complained
about the following error triggered by generic/697 test in
ext4_tmpfile():
run fstests generic/697 at 2024-02-28 05:34:46
JBD2: vfstest wants too many credits credits:260 rsv_credits:0 max:256
EXT4-fs error (device loop0) in __ext4_new_inode:1083: error 28
Indeed the credit estimate in ext4_tmpfile() is huge.
EXT4_MAXQUOTAS_INIT_BLOCKS() is 219, then 10 credits from ext4_tmpfile()
itself and then ext4_xattr_credits_for_new_inode() adds more credits
needed for security attributes and ACLs. Now the
EXT4_MAXQUOTAS_INIT_BLOCKS() is in fact unnecessary because we've
already initialized quotas with dquot_init() shortly before and so
EXT4_MAXQUOTAS_TRANS_BLOCKS() is enough (which boils down to 3 credits).
Fixes: af51a2ac36d1 ("ext4: ->tmpfile() support")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Luis Henriques <lhenriques@suse.de>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20240307115320.28949-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
kfree already checks if its argument is NULL. This fixes two
Coccinelle/coccicheck warnings reported by ifnullfree.cocci.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20240317153638.2136-2-thorsten.blum@toblux.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is already done by vfs_prepare_mode() when creating the upper object
by vfs_create(), vfs_mkdir() and vfs_mknod().
No regressions have been observed in xfstests run with posix acls turned
off for the upper filesystem.
Fixes: 1639a49ccdce ("fs: move S_ISGID stripping into the vfs_*() helpers")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Combine inode creation with opening a file.
There are six separate objects that are being set up: the backing inode,
dentry and file, and the overlay inode, dentry and file. Cleanup in case
of an error is a bit of a challenge and is difficult to test, so careful
review is needed.
All tmpfile testcases except generic/509 now run/pass, and no regressions
are observed with full xfstests.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- set correct ram_bytes when splitting ordered extent. This can be
inconsistent on-disk but harmless as it's not used for calculations
and it's only advisory for compression
- fix lockdep splat when taking cleaner mutex in qgroups disable ioctl
- fix missing mutex unlock on error path when looking up sys chunk for
relocation
* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set correct ram_bytes when splitting ordered extent
btrfs: take the cleaner_mutex earlier in qgroup disable
btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
|
|
Use submit_bio_wait() instead of hand-rolling our own synchronous
wait. Also allocate the BIO on the stack since we're not deep in
the call stack at this point.
There's no need to kmap the page, since it isn't allocated from HIGHMEM.
Turn the GFP_NOFS allocation into GFP_KERNEL; if the page allocator
enters reclaim, we cannot be called as the filesystem has not yet been
initialised and so has no pages to reclaim.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Since commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[RH: Rebased to upstream]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/e5797bb597219a49043e53e4e90aa494b97dc328.1709215665.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch simply removes the PAGE_MASK dependency since
mpage_submit_folio() is already converted to work with folio.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d6eadb090334ea49ceef4e643b371fabfcea328f.1709182251.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Truncate operation can race with writeback, in which inode->i_size can get
truncated and therefore size - folio_pos() can be negative. This fixes the
len calculation. However this path doesn't get easily triggered even
with data journaling.
Cc: stable@kernel.org # v6.5
Fixes: 80be8c5cc925 ("Fixes: ext4: Make mpage_journal_page_buffers use folio")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cff4953b5c9306aba71e944ab176a5d396b9a1b7.1709182250.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
xfs_inode.i_flags is an unsigned long, so make these helpers take that
as the flags argument instead of unsigned short. This is needed for the
next patch.
While we're at it, remove the iflags variable from xfs_iget_cache_miss
because we no longer need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
|
|
Clean up the type signature of this function since we don't have
negative attr lengths or block counts.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a helper function to compute the number of fsblocks needed to
store a maximally-sized extended attribute value.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Turn this into a properly typechecked function, and actually use the
correct blocksize for extended attributes. The function cannot be
static inline because xfsprogs userspace uses it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In the next few patches we're going to refactor the attr remote code so
that we can support headerless remote xattr values for storing merkle
tree blocks. For now, let's change the code to use unsigned int to
describe quantities of bytes and blocks that cannot be negative.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Change the implementation of the out-of-line __seq_puts() to simply be
a seq_write() call instead of duplicating the overflow/memcpy logic.
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7cebc1412d8d1338a7e52cc9291d00f5368c14e4.1713781332.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of seq_puts() usages are done with a string literal. In such cases,
the length of the string car be computed at compile time in order to save
a strlen() call at run-time. seq_putc() or seq_write() can then be used
instead.
This saves a few cycles.
To have an estimation of how often this optimization triggers:
$ git grep seq_puts.*\" | wc -l
3436
$ git grep seq_puts.*\".\" | wc -l
84
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8589bffe4830dafcb9111e22acf06603fea7132.1713781332.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christian Brauner <brauner@kernel.org>
The output for seq_putc() generation has also be checked and works.
|
|
The following commits loosened the permissions of /proc/<PID>/fdinfo/
directory, as well as the files within it, from 0500 to 0555 while also
introducing a PTRACE_MODE_READ check between the current task and
<PID>'s task:
- commit 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ")
- commit 1927e498aee1 ("procfs: prevent unprivileged processes accessing fdinfo dir")
Before those changes, inode based system calls like inotify_add_watch(2)
would fail when the current task didn't have sufficient read permissions:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0500, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied)
[...]
This matches the documented behavior in the inotify_add_watch(2) man
page:
ERRORS
EACCES Read access to the given file is not permitted.
After those changes, inotify_add_watch(2) started succeeding despite the
current task not having PTRACE_MODE_READ privileges on the target task:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = 1757
openat(AT_FDCWD, "/proc/1/task/1/fdinfo",
O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 EACCES (Permission denied)
[...]
This change in behavior broke .NET prior to v7. See the github link
below for the v7 commit that inadvertently/quietly (?) fixed .NET after
the kernel changes mentioned above.
Return to the old behavior by moving the PTRACE_MODE_READ check out of
the file .open operation and into the inode .permission operation:
[...]
lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
inotify_add_watch(64, "/proc/1/task/1/fdinfo",
IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE|
IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied)
[...]
Reported-by: Kevin Parsons (Microsoft) <parsonskev@gmail.com>
Link: https://github.com/dotnet/runtime/commit/89e5469ac591b82d38510fe7de98346cce74ad4f
Link: https://stackoverflow.com/questions/75379065/start-self-contained-net6-build-exe-as-service-on-raspbian-system-unauthorizeda
Fixes: 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ")
Cc: stable@vger.kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Hardik Garg <hargar@linux.microsoft.com>
Cc: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Link: https://lore.kernel.org/r/20240501005646.745089-1-code@tyhicks.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that cifs is using netfslib for its VM interaction, it only sees I/O in
terms of iov_iter iterators and does not see pages or folios. This makes
large multipage folios transparent to cifs and so we can turn on multipage
folios on regular files.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Remove some code that was #if'd out with the netfslib conversion. This is
split into parts for file.c as the diff generator otherwise produces a hard
to read diff for part of it where a big chunk is cut out.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Remove some code that was #if'd out with the netfslib conversion. This is
split into parts for file.c as the diff generator otherwise produces a hard
to read diff for part of it where a big chunk is cut out.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Remove some code that was #if'd out with the netfslib conversion. This is
split into parts for file.c as the diff generator otherwise produces a hard
to read diff for part of it where a big chunk is cut out.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Make the cifs filesystem use netfslib to handle reading and writing on
behalf of cifs. The changes include:
(1) Various read_iter/write_iter type functions are turned into wrappers
around netfslib API functions or are pointed directly at those
functions:
cifs_file_direct{,_nobrl}_ops switch to use
netfs_unbuffered_read_iter and netfs_unbuffered_write_iter.
Large pieces of code that will be removed are #if'd out and will be removed
in subsequent patches.
[?] Why does cifs mark the page dirty in the destination buffer of a DIO
read? Should that happen automatically? Does netfs need to do that?
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide implementation of the netfslib hooks that will be used by netfslib
to ask cifs to set up and perform operations. Of particular note are
(*) cifs_clamp_length() - This is used to negotiate the size of the next
subrequest in a read request, taking into account the credit available
and the rsize. The credits are attached to the subrequest.
(*) cifs_req_issue_read() - This is used to issue a subrequest that has
been set up and clamped.
(*) cifs_prepare_write() - This prepares to fill a subrequest by picking a
channel, reopening the file and requesting credits so that we can set
the maximum size of the subrequest and also sets the maximum number of
segments if we're doing RDMA.
(*) cifs_issue_write() - This releases any unneeded credits and issues an
asynchronous data write for the contiguous slice of file covered by
the subrequest. This should possibly be folded in to all
->async_writev() ops and that called directly.
(*) cifs_begin_writeback() - This gets the cached writable handle through
which we do writeback (this does not affect writethrough, unbuffered
or direct writes).
At this point, cifs is not wired up to actually *use* netfslib; that will
be done in a subsequent patch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Make add_credits_and_wake_if() clear the amount of credits in the
cifs_credits struct after it has returned them to the overall counter.
This allows add_credits_and_wake_if() to be called multiple times during
the error handling and cleanup without accidentally returning the credits
again and again.
Note that the wake_up() in add_credits_and_wake_if() may also be
superfluous as ->add_credits() also does a wake on the request_q.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Add mempools for the allocation of cifs_io_request and cifs_io_subrequest
structs for netfslib to use so that it can guarantee eventual allocation in
writeback.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Set zero_point in the copy_file_range() and remap_file_range()
implementations so that we don't skip reading data modified on a
server-side copy.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c so that
they are colocated with similar functions rather than being split with
cifsfs.c.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Replace the 'replay' bool in cifs_writedata (now cifs_io_subrequest) with a
flag in the netfs_io_subrequest flags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Make the wait_mtu_credits functions use size_t for the size and num
arguments rather than unsigned int as netfslib uses size_t/ssize_t for
arguments and return values to allow for extra capacity.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
|
|
Use more fields from netfs_io_subrequest instead of those incorporated into
cifs_io_subrequest from cifs_readdata and cifs_writedata.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Replace the cifs_writedata struct with the same wrapper around
netfs_io_subrequest that was used to replace cifs_readdata.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Netfslib has a facility whereby the allocation for netfs_io_subrequest can
be increased to so that filesystem-specific data can be tagged on the end.
Prepare to use this by making a struct, cifs_io_subrequest, that wraps
netfs_io_subrequest, and absorb struct cifs_readdata into it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Use a hook in the new writeback code's retry algorithm to rotate the keys
once all the outstanding subreqs have failed rather than doing it
separately on each subreq.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Do a couple of miscellaneous tidy ups:
(1) Add a qualifier into a file banner comment.
(2) Put the writeback folio traces back into alphabetical order.
(3) Remove some unused folio traces.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Remove the old writeback code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Cut over to using the new writeback code. The old code is #ifdef'd out or
otherwise removed from compilation to avoid conflicts and will be removed
in a future patch.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Implement the helpers for the new write code in cachefiles. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
|
|
Implement the helpers for the new write code in 9p. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Implement the helpers for the new write code in afs. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Add some write-side stats to count buffered writes, buffered writethrough,
and writepages calls.
Whilst we're at it, clean up the naming on some of the existing stats
counters and organise the output into two sets.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
The current netfslib writeback implementation creates writeback requests of
contiguous folio data and then separately tiles subrequests over the space
twice, once for the server and once for the cache. This creates a few
issues:
(1) Every time there's a discontiguity or a change between writing to only
one destination or writing to both, it must create a new request.
This makes it harder to do vectored writes.
(2) The folios don't have the writeback mark removed until the end of the
request - and a request could be hundreds of megabytes.
(3) In future, I want to support a larger cache granularity, which will
require aggregation of some folios that contain unmodified data (which
only need to go to the cache) and some which contain modifications
(which need to be uploaded and stored to the cache) - but, currently,
these are treated as discontiguous.
There's also a move to get everyone to use writeback_iter() to extract
writable folios from the pagecache. That said, currently writeback_iter()
has some issues that make it less than ideal:
(1) there's no way to cancel the iteration, even if you find a "temporary"
error that means the current folio and all subsequent folios are going
to fail;
(2) there's no way to filter the folios being written back - something
that will impact Ceph with it's ordered snap system;
(3) and if you get a folio you can't immediately deal with (say you need
to flush the preceding writes), you are left with a folio hanging in
the locked state for the duration, when really we should unlock it and
relock it later.
In this new implementation, I use writeback_iter() to pump folios,
progressively creating two parallel, but separate streams and cleaning up
the finished folios as the subrequests complete. Either or both streams
can contain gaps, and the subrequests in each stream can be of variable
size, don't need to align with each other and don't need to align with the
folios.
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple folios, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated, and a subrequest may need splitting),
and doing RMW for content crypto if there's a conflicting change on
the server.
[!] Note that some of the functions are prefixed with "new_" to avoid
clashes with existing functions. These will be renamed in a later patch
that cuts over to the new algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Switch to using unsigned long long rather than loff_t in netfslib to avoid
problems with the sign flipping in the maths when we're dealing with the
byte at position 0x7fffffffffffffff.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
|
|
Use mempools for allocating requests and subrequests in an effort to make
sure that allocation always succeeds so that when performing writeback we
can always make progress.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Remove support for ->launder_folio() from netfslib and expect filesystems
to use filemap_invalidate_inode() instead. netfs_launder_folio() can then
be got rid of.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: devel@lists.orangefs.org
|
|
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
