| Age | Commit message (Collapse) | Author |
|---|
|
Pull ceph updates from Ilya Dryomov:
"A small patchset to address bogus I/O errors and ultimately an
assertion failure in the face of watch errors with -o exclusive
mappings in RBD marked for stable and some assorted CephFS fixes"
* tag 'ceph-for-6.11-rc1' of https://github.com/ceph/ceph-client:
rbd: don't assume rbd_is_lock_owner() for exclusive mappings
rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappings
rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
ceph: fix incorrect kmalloc size of pagevec mempool
ceph: periodically flush the cap releases
ceph: convert comma to semicolon in __ceph_dentry_dir_lease_touch()
ceph: use cap_wait_list only if debugfs is enabled
|
|
Add more dynamic tracepoints to help debug copy_file_range (copychunk)
and clone_range ("duplicate extents"). These are tracepoints for
entering the function and completing without error. For example:
"trace-cmd record -e smb3_copychunk_enter -e smb3_copychunk_done"
or
"trace-cmd record -e smb3_clone_enter -e smb3_clone_done"
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
cp-5964 [005] ..... 2176.168977: smb3_clone_enter:
xid=17 sid=0xeb275be4 tid=0x7ffa7cdb source fid=0x1ed02e15
source offset=0x0 target fid=0x1ed02e15 target offset=0x0
len=0xa0000
cp-5964 [005] ..... 2176.170668: smb3_clone_done:
xid=17 sid=0xeb275be4 tid=0x7ffa7cdb source fid=0x1ed02e15
source offset=0x0 target fid=0x1ed02e15 target offset=0x0
len=0xa0000
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are cases where debugging clone_range ("smb2_duplicate_extents"
function) and in the future copy_range ("smb2_copychunk_range") can
be helpful. Add dynamic trace points for any errors in clone, and
a followon patch will add them for copychunk.
"trace-cmd record -e smb3_clone_err"
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull more erofs updates from Gao Xiang:
- Support STATX_DIOALIGN and FS_IOC_GETFSSYSFSPATH
- Fix a race of LZ4 decompression due to recent refactoring
- Another multi-page folio adaption in erofs_bread()
* tag 'erofs-for-6.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: convert comma to semicolon
erofs: support multi-page folios for erofs_bread()
erofs: add support for FS_IOC_GETFSSYSFSPATH
erofs: fix race in z_erofs_get_gbuf()
erofs: support STATX_DIOALIGN
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240724020721.2389738-1-nichen@iscas.ac.cn
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
If the requested page is part of the previous multi-page folio, there
is no need to call read_mapping_folio() again.
Also, get rid of the remaining one of page->index [1] in our codebase.
[1] https://lore.kernel.org/r/Zp8fgUSIBGQ1TN0D@casper.infradead.org
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240723073024.875290-1-hsiangkao@linux.alibaba.com
|
|
FS_IOC_GETFSSYSFSPATH ioctl exposes /sys/fs path of a given filesystem,
potentially standarizing sysfs reporting. This patch add support for
FS_IOC_GETFSSYSFSPATH for erofs, "erofs/<dev>" will be outputted for bdev
cases, "erofs/[domain_id,]<fs_id>" will be outputted for fscache cases.
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Link: https://lore.kernel.org/r/20240720082335.441563-1-huangxiaojia2@huawei.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
In z_erofs_get_gbuf(), the current task may be migrated to another
CPU between `z_erofs_gbuf_id()` and `spin_lock(&gbuf->lock)`.
Therefore, z_erofs_put_gbuf() will trigger the following issue
which was found by stress test:
<2>[772156.434168] kernel BUG at fs/erofs/zutil.c:58!
..
<4>[772156.435007]
<4>[772156.439237] CPU: 0 PID: 3078 Comm: stress Kdump: loaded Tainted: G E 6.10.0-rc7+ #2
<4>[772156.439239] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 1.0.0 01/01/2017
<4>[772156.439241] pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
<4>[772156.439243] pc : z_erofs_put_gbuf+0x64/0x70 [erofs]
<4>[772156.439252] lr : z_erofs_lz4_decompress+0x600/0x6a0 [erofs]
..
<6>[772156.445958] stress (3127): drop_caches: 1
<4>[772156.446120] Call trace:
<4>[772156.446121] z_erofs_put_gbuf+0x64/0x70 [erofs]
<4>[772156.446761] z_erofs_lz4_decompress+0x600/0x6a0 [erofs]
<4>[772156.446897] z_erofs_decompress_queue+0x740/0xa10 [erofs]
<4>[772156.447036] z_erofs_runqueue+0x428/0x8c0 [erofs]
<4>[772156.447160] z_erofs_readahead+0x224/0x390 [erofs]
..
Fixes: f36f3010f676 ("erofs: rename per-CPU buffers to global buffer pool and make it configurable")
Cc: <stable@vger.kernel.org> # 6.10+
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240722035110.3456740-1-hsiangkao@linux.alibaba.com
|
|
Add support for STATX_DIOALIGN to EROFS, so that direct I/O
alignment restrictions are exposed to userspace in a generic
way.
[Before]
```
./statx_test /mnt/erofs/testfile
statx(/mnt/erofs/testfile) = 0
dio mem align:0
dio offset align:0
```
[After]
```
./statx_test /mnt/erofs/testfile
statx(/mnt/erofs/testfile) = 0
dio mem align:512
dio offset align:512
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240718083243.2485437-1-hsiangkao@linux.alibaba.com
|
|
If we attempt to insert a compressed extent map that has a range that
overlaps another extent map we have in the inode's extent map tree, we
can end up with an incorrect offset after adjusting the new extent map at
merge_extent_mapping() because we don't update the extent map's offset.
For example consider the following scenario:
1) We have a file extent item for a compressed extent covering the file
range [108K, 144K) and currently there's no corresponding extent map
in the inode's extent map tree;
2) The inode's size is 141K;
3) We have an encoded write (compressed) into the file range [120K, 128K),
which overlaps the existing file extent item. The encoded write creates
a matching extent map, adds it to the inode's extent map tree and
creates an ordered extent for it.
Note that the corresponding file extent item is added to the subvolume
tree only when the ordered extent completes (when executing
btrfs_finish_one_ordered());
4) We have a write into the file range [160K, 164K).
This writes increases the i_size of the file, and there's a hole
between the current i_size (141K) and the start offset of this write,
and since the old i_size is in the middle of the block [140K, 144K),
we have to write zeroes to the range [141K, 144K) (3072 bytes) and
therefore dirty that page.
We then call btrfs_set_extent_delalloc() with a start offset of 140K.
We then end up at btrfs_find_new_delalloc_bytes() which will call
btrfs_get_extent() for the range [140K, 144K);
5) The btrfs_get_extent() doesn't find any extent map in the inode's
extent map tree covering the range [140K, 144K), so it searches the
subvolume tree for any file extent items covering that range.
There it finds the file extent item for the range [108K, 144K),
creates a compressed extent map for that range and then calls
btrfs_add_extent_mapping() with that extent map and passes the
range [140K, 144K) via the "start" and "len" parameters;
6) The call to add_extent_mapping() done by btrfs_add_extent_mapping()
fails with -EEXIST because there's an extent map, created at step 2
for the [120K, 128K) range, that covers that overlaps with the range
of the given extent map ([108K, 144K)).
Then it does a lookup for extent map from step 2 add calls
merge_extent_mapping() to adjust the input extent map ([108K, 144K)).
That adjust the extent map to a start offset of 128K and a length
of 16K (starting just after the extent map from step 2), but it does
not update the offset field of the extent map, leaving it with a value
of zero instead of updating to a value of 20K (128K - 108K = 20K).
As a result any read for the range [128K, 144K) can return
incorrect data since we read from a wrong section of the extent (unless
both the correct and incorrect ranges happen to have the same data).
So fix this by changing merge_extent_mapping() to update the extent map's
offset even if it's compressed. Also add a test case to the self tests.
This didn't happen before the patchset that does big changes in the extent
map structure (which includes the commit in the Fixes tag below) because
we kept track of the original start offset in the extent map (member
"orig_start") so we could always calculate the correct offset by
subtracting that offset from the start offset.
A test case for fstests that triggered this problem using send/receive
with compressed writes will be added soon.
Fixes: 3d2ac9922465 ("btrfs: introduce new members for extent_map")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[CORRUPTION]
There is a bug report that btrfs flips RO due to a corruption in the
extent tree, the involved dumps looks like this:
item 188 key (402811572224 168 4096) itemoff 14598 itemsize 79
extent refs 3 gen 3678544 flags 1
ref#0: extent data backref root 13835058055282163977 objectid 281473384125923 offset 81432576 count 1
ref#1: shared data backref parent 1947073626112 count 1
ref#2: shared data backref parent 1156030103552 count 1
BTRFS critical (device vdc1: state EA): unable to find ref byte nr 402811572224 parent 0 root 265 owner 28703026 offset 81432576 slot 189
BTRFS error (device vdc1: state EA): failed to run delayed ref for logical 402811572224 num_bytes 4096 type 178 action 2 ref_mod 1: -2
[CAUSE]
The corrupted entry is ref#0 of item 188.
The root number 13835058055282163977 is beyond the upper limit for root
items (the current limit is 1 << 48), and the objectid also looks
suspicious.
Only the offset and count is correct.
[ENHANCEMENT]
Although it's still unknown why we have such many bytes corrupted
randomly, we can still enhance the tree-checker for data backrefs by:
- Validate the root value
For now there should only be 3 types of roots can have data backref:
* subvolume trees
* data reloc trees
* root tree
Only for v1 space cache
- validate the objectid value
The objectid should be a valid inode number.
Hopefully we can catch such problem in the future with the new checkers.
Reported-by: Kai Krakow <hurikhan77@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAMthOuPjg5RDT-G_LXeBBUUtzt3cq=JywF+D1_h+JYxe=WKp-Q@mail.gmail.com/#t
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl constification from Joel Granados:
"Treewide constification of the ctl_table argument of proc_handlers
using a coccinelle script and some manual code formatting fixups.
This is a prerequisite to moving the static ctl_table structs into
read-only data section which will ensure that proc_handler function
pointers cannot be modified"
* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: treewide: constify the ctl_table argument of proc_handlers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
|
|
Commit e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.
Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.
But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).
So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In __wait_on_freeing_inode() we warn in case the inode_hash_lock is held
but the inode is unhashed. We then release the inode_lock. So using
"locked" as parameter name is confusing. Use is_inode_hash_locked as
parameter name instead.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When using cachefiles, lockdep may emit something similar to the circular
locking dependency notice below. The problem appears to stem from the
following:
(1) Cachefiles manipulates xattrs on the files in its cache when called
from ->writepages().
(2) The setxattr() and removexattr() system call handlers get the name
(and value) from userspace after taking the sb_writers lock, putting
accesses of the vma->vm_lock and mm->mmap_lock inside of that.
(3) The afs filesystem uses a per-inode lock to prevent multiple
revalidation RPCs and in writeback vs truncate to prevent parallel
operations from deadlocking against the server on one side and local
page locks on the other.
Fix this by moving the getting of the name and value in {get,remove}xattr()
outside of the sb_writers lock. This also has the minor benefits that we
don't need to reget these in the event of a retry and we never try to take
the sb_writers lock in the event we can't pull the name and value into the
kernel.
Alternative approaches that might fix this include moving the dispatch of a
write to the cache off to a workqueue or trying to do without the
validation lock in afs. Note that this might also affect other filesystems
that use netfslib and/or cachefiles.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-build2+ #956 Not tainted
------------------------------------------------------
fsstress/6050 is trying to acquire lock:
ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0
but task is already holding lock:
ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&vma->vm_lock->lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_write+0x3b/0x50
vma_start_write+0x6b/0xa0
vma_link+0xcc/0x140
insert_vm_struct+0xb7/0xf0
alloc_bprm+0x2c1/0x390
kernel_execve+0x65/0x1a0
call_usermodehelper_exec_async+0x14d/0x190
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
-> #3 (&mm->mmap_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
__might_fault+0x7c/0xb0
strncpy_from_user+0x25/0x160
removexattr+0x7f/0x100
__do_sys_fremovexattr+0x7e/0xb0
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (sb_writers#14){.+.+}-{0:0}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
percpu_down_read+0x3c/0x90
vfs_iocb_iter_write+0xe9/0x1d0
__cachefiles_write+0x367/0x430
cachefiles_issue_write+0x299/0x2f0
netfs_advance_write+0x117/0x140
netfs_write_folio.isra.0+0x5ca/0x6e0
netfs_writepages+0x230/0x2f0
afs_writepages+0x4d/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
__filemap_fdatawrite_range+0xa8/0xf0
file_write_and_wait_range+0x59/0x90
afs_release+0x10f/0x270
__fput+0x25f/0x3d0
__do_sys_close+0x43/0x70
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vnode->validate_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
afs_writepages+0x37/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
filemap_invalidate_inode+0x167/0x1e0
netfs_unbuffered_write_iter+0x1bd/0x2d0
vfs_write+0x22e/0x320
ksys_write+0xbc/0x130
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (mapping.invalidate_lock#3){++++}-{3:3}:
check_noncircular+0x119/0x160
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
filemap_fault+0x26e/0x8b0
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&vma->vm_lock->lock);
lock(&mm->mmap_lock);
lock(&vma->vm_lock->lock);
rlock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by fsstress/6050:
#0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
stack backtrace:
CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ #956
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
check_noncircular+0x119/0x160
? queued_spin_lock_slowpath+0x4be/0x510
? __pfx_check_noncircular+0x10/0x10
? __pfx_queued_spin_lock_slowpath+0x10/0x10
? mark_lock+0x47/0x160
? init_chain_block+0x9c/0xc0
? add_chain_block+0x84/0xf0
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
? __pfx___lock_acquire+0x10/0x10
? __lock_release.isra.0+0x13b/0x230
lock_acquire.part.0+0x103/0x280
? filemap_fault+0x26e/0x8b0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd7/0x120
down_read+0x95/0x200
? filemap_fault+0x26e/0x8b0
? __pfx_down_read+0x10/0x10
? __filemap_get_folio+0x25/0x1a0
filemap_fault+0x26e/0x8b0
? __pfx_filemap_fault+0x10/0x10
? find_held_lock+0x7c/0x90
? __pfx___lock_release.isra.0+0x10/0x10
? __pte_offset_map+0x99/0x110
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
? __pfx___handle_mm_fault+0x10/0x10
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/2136178.1721725194@warthog.procyon.org.uk
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
[brauner: fix minor issues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The counter is unconditionally incremented for each mount allocation.
If we set it to 1ULL << 32 we're losing 4294967296 as the first valid
non-32 bit mount id.
Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-1-834113cab0d2@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set the maximum size of a subrequest that writes to cachefiles to be
MAX_RW_COUNT so that we don't overrun the maximum write we can make to the
backing filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599005.1721398742@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When netfslib is performing writeback (ie. ->writepages), it maintains two
parallel streams of writes, one to the server and one to the cache, but it
doesn't mark either stream of writes as active until it gets some data that
needs to be written to that stream.
This is done because some folios will only be written to the cache
(e.g. copying to the cache on read is done by marking the folios and
letting writeback do the actual work) and sometimes we'll only be writing
to the server (e.g. if there's no cache).
Now, since we don't actually dispatch uploads and cache writes in parallel,
but rather flip between the streams, depending on which has the lowest
so-far-issued offset, and don't wait for the subreqs to finish before
flipping, we can end up in a situation where, say, we issue a write to the
server and this completes before we start the write to the cache.
But because we only activate a stream when we first add a subreq to it, the
result collection code may run before we manage to activate the stream -
resulting in the folio being cleaned and having the writeback-in-progress
mark removed. At this point, the folio no longer belongs to us.
This is only really a problem for folios that need to be written to both
streams - and in that case, the upload to the server is started first,
followed by the write to the cache - and the cache write may see a bad
folio.
Fix this by activating the cache stream up front if there's a cache
available. If there's a cache, then all data is going to be written to it.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599053.1721398818@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The nsproxy structure contains nearly all of the namespaces associated
with a task. When a given namespace type is not supported by this kernel
the rules whether the corresponding pointer in struct nsproxy is NULL or
always init_<ns_type>_ns differ per namespace. Ideally, that wouldn't be
the case and for all namespace types we'd always set it to
init_<ns_type>_ns when the corresponding namespace type isn't supported.
Make sure we handle all namespaces where the pointer in struct nsproxy
can be NULL when the namespace type isn't supported.
Link: https://lore.kernel.org/r/20240722-work-pidfs-e6a83030f63e@brauner
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
syzbot call pidfd_ioctl() with cmd "PIDFD_GET_TIME_NAMESPACE" and disabled
CONFIG_TIME_NS, since time_ns is NULL, it will make NULL ponter deref in
open_namespace.
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Reported-and-tested-by: syzbot+34a0ee986f61f15da35d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34a0ee986f61f15da35d
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_7FAE8DB725EE0DD69236DDABDDDE195E4F07@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
correct the comments of vfs_*() helpers in fs/namei.c, including:
1. vfs_create()
2. vfs_mknod()
3. vfs_mkdir()
4. vfs_rmdir()
5. vfs_symlink()
All of them come from the same commit:
6521f8917082 "namei: prepare for idmapped mounts"
The @dentry is actually the dentry of child directory rather than
base directory(parent directory), and thus the @dir has to be
modified due to the change of @dentry.
Signed-off-by: Congjie Zhou <zcjie0802@qq.com>
Link: https://lore.kernel.org/r/tencent_2FCF6CC9E10DC8A27AE58A5A0FE4FCE96D0A@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Lockless hash lookup can find and lock the inode after it gets the
I_FREEING flag set, at which point it blocks waiting for teardown in
evict() to finish.
However, the flag is still set even after evict() wakes up all waiters.
This results in a race where if the inode lock is taken late enough, it
can happen after both hash removal and wakeups, meaning there is nobody
to wake the racing thread up.
This worked prior to RCU-based lookup because the entire ordeal was
synchronized with the inode hash lock.
Since unhashing requires the inode lock, we can safely check whether it
happened after acquiring it.
Link: https://lore.kernel.org/v9fs/20240717102458.649b60be@kernel.org/
Reported-by: Dominique Martinet <asmadeus@codewreck.org>
Fixes: 7180f8d91fcb ("vfs: add rcu-based find_inode variants for iget ops")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240718151838.611807-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
CONFIG_FSCACHE_DEBUG should have been renamed to CONFIG_NETFS_DEBUG, so do
that now.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1410796.1721333406@warthog.procyon.org.uk
cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Revert commit 163eae0fb0d4c610c59a8de38040f8e12f89fd43 to get back the
original operation of the debugging macros.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240608151352.22860-2-ukleinek@kernel.org
Link: https://lore.kernel.org/r/1410685.1721333252@warthog.procyon.org.uk
cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This moves the exec and binfmt_elf tests out of your way and into the
tests/ subdirectory, following the newly ratified KUnit naming
conventions. :)"
* tag 'execve-v6.11-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
execve: Move KUnit tests to tests/ subdirectory
|
|
Although by default we negotiate CIFS Unix Extensions for SMB1 mounts to
Samba (and they work if the user does not specify "unix" or "posix" or
"linux" on mount), and we do properly handle when a user turns them off
with "nounix" mount parm. But with the changes to the mount API we
broke cases where the user explicitly specifies the "unix" option (or
equivalently "linux" or "posix") on mount with vers=1.0 to Samba or other
servers which support the CIFS Unix Extensions.
"mount error(95): Operation not supported"
and logged:
"CIFS: VFS: Check vers= mount option. SMB3.11 disabled but required for POSIX extensions"
even though CIFS Unix Extensions are supported for vers=1.0 This patch fixes
the case where the user specifies both "unix" (or equivalently "posix" or
"linux") and "vers=1.0" on mount to a server which supports the
CIFS Unix Extensions.
Cc: stable@vger.kernel.org
Reviewed-by: David Howells <dhowell@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When mounting with the SMB1 Unix Extensions (e.g. mounts
to Samba with vers=1.0), reconnects no longer reset the
Unix Extensions (SetFSInfo SET_FILE_UNIX_BASIC) after tcon so most
operations (e.g. stat, ls, open, statfs) will fail continuously
with:
"Operation not supported"
if the connection ever resets (e.g. due to brief network disconnect)
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"A pretty small update including mostly minor bug fixes in zoned
storage along with the large section support.
Enhancements:
- add support for FS_IOC_GETFSSYSFSPATH
- enable atgc dynamically if conditions are met
- use new ioprio Macro to get ckpt thread ioprio level
- remove unreachable lazytime mount option parsing
Bug fixes:
- fix null reference error when checking end of zone
- fix start segno of large section
- fix to cover read extent cache access with lock
- don't dirty inode for readonly filesystem
- allocate a new section if curseg is not the first seg in its zone
- only fragment segment in the same section
- truncate preallocated blocks in f2fs_file_open()
- fix to avoid use SSR allocate when do defragment
- fix to force buffered IO on inline_data inode
And some minor code clean-ups and sanity checks"
* tag 'f2fs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (26 commits)
f2fs: clean up addrs_per_{inode,block}()
f2fs: clean up F2FS_I()
f2fs: use meta inode for GC of COW file
f2fs: use meta inode for GC of atomic file
f2fs: only fragment segment in the same section
f2fs: fix to update user block counts in block_operations()
f2fs: remove unreachable lazytime mount option parsing
f2fs: fix null reference error when checking end of zone
f2fs: fix start segno of large section
f2fs: remove redundant sanity check in sanity_check_inode()
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
f2fs: fix to use mnt_{want,drop}_write_file replace file_{start,end}_wrtie
f2fs: clean up set REQ_RAHEAD given rac
f2fs: enable atgc dynamically if conditions are met
f2fs: fix to truncate preallocated blocks in f2fs_file_open()
f2fs: fix to cover read extent cache access with lock
f2fs: fix return value of f2fs_convert_inline_inode()
f2fs: use new ioprio Macro to get ckpt thread ioprio level
f2fs: fix to don't dirty inode for readonly filesystem
f2fs: fix to avoid use SSR allocate when do defragment
...
|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
path
Dan Carpenter reported a Smack static checker warning:
fs/smb/client/cifsfs.c:1981 init_cifs()
error: we previously assumed 'serverclose_wq' could be null (see line 1895)
The patch which introduced the serverclose workqueue used the wrong
oredering in error paths in init_cifs() for freeing it on errors.
Fixes: 173217bd7336 ("smb3: retrying on failed server close")
Cc: stable@vger.kernel.org
Cc: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kmalloc size of pagevec mempool is incorrectly calculated.
It misses the size of page pointer and only accounts the number for the array.
Fixes: a0102bda5bc0 ("ceph: move sb->wb_pagevec_pool to be a global mempool")
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The MDS could be waiting the caps releases infinitely in some corner
case and then reporting the caps revoke stuck warning. To fix this
we should periodically flush the cap releases.
Link: https://tracker.ceph.com/issues/57244
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Only debugfs uses this list. By omitting it, we save some memory and
reduce lock contention on `caps_list_lock`.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Move the exec KUnit tests into a separate directory to avoid polluting
the local directory namespace. Additionally update MAINTAINERS for the
new files.
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240720170310.it.942-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- another fix for fsck getting stuck, from marcin
- small syzbot fix
- another undefined shift fix
* tag 'bcachefs-2024-07-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix printbuf usage while atomic
bcachefs: More informative error message in reattach_inode()
bcachefs: kill btree_trans_too_many_iters() in bch2_bucket_alloc_freelist()
bcachefs: mean_and_variance: Avoid too-large shift amounts
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- simple fileattr support
Fixes:
- transform resident to nonresident for compressed files
- the format of the "nocase" mount option
- getting file type
- many other internal bugs
Refactoring:
- remove unused functions and macros
- partial transition from page to folio (suggested by Matthew Wilcox)
- legacy ntfs support"
* tag 'ntfs3_for_6.11' of https://github.com/Paragon-Software-Group/linux-ntfs3: (42 commits)
fs/ntfs3: Fix formatting, change comments, renaming
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
fs/ntfs3: Implement simple fileattr
fs/ntfs3: Redesign legacy ntfs support
fs/ntfs3: Use function file_inode to get inode from file
fs/ntfs3: Minor ntfs_list_ea refactoring
fs/ntfs3: Check more cases when directory is corrupted
fs/ntfs3: Do copy_to_user out of run_lock
fs/ntfs3: Keep runs for $MFT::$ATTR_DATA and $MFT::$ATTR_BITMAP
fs/ntfs3: Missed error return
fs/ntfs3: Fix the format of the "nocase" mount option
fs/ntfs3: Fix field-spanning write in INDEX_HDR
ntfs3: Convert attr_wof_frame_info() to use a folio
ntfs3: Convert ni_readpage_cmpr() to take a folio
ntfs3: Convert ntfs_get_frame_pages() to use a folio
ntfs3: Remove calls to set/clear the error flag
ntfs3: Convert attr_make_nonresident to use a folio
ntfs3: Convert attr_data_write_resident to use a folio
ntfs3: Convert ntfs_write_end() to work on a folio
ntfs3: Convert attr_data_read_resident() to take a folio
...
|
|
Simply set error code to -EEXIST when quota limit is already enabled in
dquot_quota_enable to remove unnecessary error code translation.
Link: https://patch.msgid.link/20240715130534.2112678-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Function dquot_claim_space_nodirty nad dquot_reclaim_space_nodirty have
no return value, just remove redundant return at end of the functions.
Link: https://patch.msgid.link/20240715130534.2112678-4-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The register_quota_format always returns 0, simply remove unneeded return
value.
Link: https://patch.msgid.link/20240715130534.2112678-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Avoid missing put_quota_format when DQUOT_SUSPENDED is passed to
dquot_load_quota_sb.
Link: https://patch.msgid.link/20240715130534.2112678-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Fixes: d44c57663723 ("quota: Remove BUG_ON in dquot_load_quota_sb()")
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Reported-by: syzbot+f765e51170cf13493f0b@syzkaller.appspotmail.com
Fixes: f12410bb7ddd ("bcachefs: Add an error message for insufficient rw journal devs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When creating nfsd sockets via the netlink interface, we do want to
register with the portmapper. Don't set SVC_SOCK_ANONYMOUS.
Reported-by: Steve Dickson <steved@redhat.com>
Fixes: 16a471177496 ("NFSD: add listener-{set,get} netlink command")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
