| Age | Commit message (Collapse) | Author |
|---|
|
Currently while doing block allocation grp->bb_free may be getting
modified if discard is happening in parallel.
For e.g. consider a case where there are lot of threads who have
preallocated lot of blocks and there is a thread which is trying
to discard all of this group's PA. Now it could happen that
we see all of those group's bb_free is zero and fail the allocation
while there is sufficient space if we free up all the PA.
So this patch adds another flag "EXT4_MB_STRICT_CHECK" which will be set
if we are unable to allocate any blocks in the first try (since we may
not have considered blocks about to be discarded from PA lists).
So during retry attempt to allocate blocks we will use ext4_lock_group()
for checking if the group is good or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/9cb740a117c958c36596f167b12af1beae9a68b7.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_good_group() definition was changed some time back
and now it even initializes the buddy cache (via ext4_mb_init_group()),
if in case the EXT4_MB_GRP_NEED_INIT() is true for a group.
Note that ext4_mb_init_group() could sleep and so should not be called
under a spinlock held.
This is fine as of now because ext4_mb_good_group() is called before
loading the buddy bitmap without ext4_lock_group() held
and again called after loading the bitmap, only this time with
ext4_lock_group() held.
But still this whole thing is confusing.
So this patch refactors out ext4_mb_good_group_nolock() which should be
called when without holding ext4_lock_group().
Also in further patches we hold the spinlock (ext4_lock_group()) while
doing any calculations which involves grp->bb_free or grp->bb_fragments.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d9f7d031a5fbe1c943fae6bf1ff5cdf0604ae722.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There could be a race in function ext4_mb_discard_group_preallocations()
where the 1st thread may iterate through group's bb_prealloc_list and
remove all the PAs and add to function's local list head.
Now if the 2nd thread comes in to discard the group preallocations,
it will see that the group->bb_prealloc_list is empty and will return 0.
Consider for a case where we have less number of groups
(for e.g. just group 0),
this may even return an -ENOSPC error from ext4_mb_new_blocks()
(where we call for ext4_mb_discard_group_preallocations()).
But that is wrong, since 2nd thread should have waited for 1st thread
to release all the PAs and should have retried for allocation.
Since 1st thread was anyway going to discard the PAs.
The algorithm using this percpu seq counter goes below:
1. We sample the percpu discard_pa_seq counter before trying for block
allocation in ext4_mb_new_blocks().
2. We increment this percpu discard_pa_seq counter when we either allocate
or free these blocks i.e. while marking those blocks as used/free in
mb_mark_used()/mb_free_blocks().
3. We also increment this percpu seq counter when we successfully identify
that the bb_prealloc_list is not empty and hence proceed for discarding
of those PAs inside ext4_mb_discard_group_preallocations().
Now to make sure that the regular fast path of block allocation is not
affected, as a small optimization we only sample the percpu seq counter
on that cpu. Only when the block allocation fails and when freed blocks
found were 0, that is when we sample percpu seq counter for all cpus using
below function ext4_get_discard_pa_seq_sum(). This happens after making
sure that all the PAs on grp->bb_prealloc_list got freed or if it's empty.
It can be well argued that why don't just check for grp->bb_free to
see if there are any free blocks to be allocated. So here are the two
concerns which were discussed:-
1. If for some reason the blocks available in the group are not
appropriate for allocation logic (say for e.g.
EXT4_MB_HINT_GOAL_ONLY, although this is not yet implemented), then
the retry logic may result into infinte looping since grp->bb_free is
non-zero.
2. Also before preallocation was clubbed with block allocation with the
same ext4_lock_group() held, there were lot of races where grp->bb_free
could not be reliably relied upon.
Due to above, this patch considers discard_pa_seq logic to determine if
we should retry for block allocation. Say if there are are n threads
trying for block allocation and none of those could allocate or discard
any of the blocks, then all of those n threads will fail the block
allocation and return -ENOSPC error. (Since the seq counter for all of
those will match as no block allocation/discard was done during that
duration).
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/7f254686903b87c419d798742fd9a1be34f0657b.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement ext4_mb_discard_preallocations_should_retry()
which we will need in later patches to add more logic
like check for sequence number match to see if we should
retry for block allocation or not.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1cfae0098d2aa9afbeb59331401258182868c8f2.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_discard_preallocations() only checks for grp->bb_prealloc_list
of every group to discard the group's PA to free up the space if
allocation request fails. Consider below race:-
Process A Process B
1. allocate blocks
1. Fails block allocation from
ext4_mb_regular_allocator()
ext4_lock_group()
allocated blocks
more than ac_o_ex.fe_len
ext4_unlock_group()
2. Scans the
grp->bb_prealloc_list (under
ext4_lock_group()) and
find nothing and thus return
-ENOSPC.
2. Add the additional blocks to PA list
ext4_lock_group()
add blocks to grp->bb_prealloc_list
ext4_unlock_group()
Above race could be avoided if we add those additional blocks to
grp->bb_prealloc_list at the same time with block allocation when
ext4_lock_group() was still held.
With this discard-PA will know if there are actually any blocks which
could be freed from the PA
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/a2217dd782585b42328981832e6d396abaaccb80.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
No one currently needs EXT4_INODE_CASEFOLD, but add it to keep the
EXT4_INODE_* definitions in sync with the EXT4_*_FL definitions.
Also make it clearer that the casefold flag is only for directories.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200510215252.87833-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The path performing block allocations in ext4_ext_map_blocks() contains
code trimming the length of a new extent that is repeated later
in the function. This code is both redundant and unnecessary as the
exact length of the new extent has already been calculated. Rewrite the
instantiation of the map struct in this case to use the available
values, avoiding the overhead of unnecessary conversions and improving
clarity. Add another map struct instantiation tailored specifically to
the separate case for an existing written extent. Remove an old comment
that no longer appears applicable to the current code.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200510155805.18808-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
|
|
ext_debug() msgs could be helpful, provided those could be enabled
without recompiling kernel and also if we could selectively enable
only required prints for case by case debugging.
So make ext_debug() implementation use pr_debug().
Also change ext_debug() to be defined with CONFIG_EXT4_DEBUG.
So EXT_DEBUG macro now mostly remain for below 3 functions.
ext4_ext_show_path/leaf/move() (whose print msgs use ext_debug()
which again could be dynamically enabled using pr_debug())
This also changes the ext_debug() to take inode as a parameter
to add inode no. in all of it's msgs.
Prints additional info like process name / pid, superblock id etc.
This also removes any explicit function names passed in ext_debug().
Since ext_debug() on it's own prints file, func and line no.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d31dc189b0aeda9384fe7665e36da7cd8c61571f.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
mb_debug() msg had only 1 control level for all type of msgs.
And if we enable mballoc_debug then all of those msgs would be enabled.
Instead of adding multiple debug levels for mb_debug() msgs, use
pr_debug() with which we could have finer control to print msgs at all
of different levels (i.e. at file, func, line no.).
Also add process name/pid, superblk id, and other info in mb_debug()
msg. This also kills the mballoc_debug module parameter, since it is
not needed any more.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/f0c660cbde9e2edbe95c67942ca9ad80dd2231eb.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_ext_handle_unwritten_extents()
Replace EXT_DEBUG with __maybe_unused from inside
ext4_ext_handle_unwritten_extents() function.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/ae335b94506cd9db9d2648c1f4dd25a80f9f3ce2.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_map_blocks() has ext_debug msg early at the start of function.
We also get ext_debug msg if we could allocate a block from
ext4_ext_map_blocks(). But there is no ext_debug() msg in case of
block allocation failure. So add one along with error code.
Also add more info in ext_debug() msg like how many blocks were allocated
v/s how many were requested in ext4_ext_map_blocks().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1610ec2aa932396be00f9d552fe29da473ead176.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Simply use BIT() macro for all BH_** state bits instead of open
coding it.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/57667689f51a3f9dba2fcef7d3425187fa3ba69f.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use task_pid_nr() function instead of current->pid.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/4b58403e15e9c8deb34a1b93deb3fc9cd153ab84.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make sure to check for e4b->bd_info->bb_bitmap == NULL, in
mb_cmp_bitmaps() and return if NULL, to avoid possible NULL ptr
dereference. Similar to how we do this in other ifdef DOUBLE_CHECK
functions.
Also remove the BUG_ON() logic if kmalloc() or ext4_read_block_bitmap()
fails. We should simply mark grp->bb_bitmap as NULL if above happens.
In fact ext4_read_block_bitmap() may even return an error in case of resize
ioctl. Hence remove this BUG_ON logic (fstests ext4/032 may trigger
this).
Link: https://lore.kernel.org/r/9a54f8a696ff17c057cd571be3d15ac3ec1407f1.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch implemets mb_group_bb_bitmap_alloc() and
mb_group_bb_bitmap_free() function to remove #ifdef DOUBLE_CHECK macro
and it's related code from inside
ext4_mb_add_groupinfo()/ext4_mb_release().
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8c2095d74b779f0254a19b24982490dc6f07c4f9.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Change return type of function ext4_mb_use_preallocated() to bool to
better reflect what this function can return.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/7880cb6ef911465beafefcd7e9c3ea214688744b.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch simplifies error handling logic in ext4_init_mballoc(),
by adding all the cleanups at one place at the end of that function.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8621a7bc68f7107a9ac4292afeb784515333bd25.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix few other format specifiers in mb_debug() msgs.
As such no other functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/574fa7f833abf2dbf3b53a2fea3195e71f6cdbd8.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
pa->pa_len is an integer. Fix all of the format specifier used in
mb_debug() for pa_len to %d instead of %u.
As such no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/af4987f643c586f62bcc9961e43f0a67151d5551.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds some more debugging mb_debug() msgs to help improve
mballoc code debugging.
Other than adding more mb_debug() msgs at few more places,
there should be no other functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/5fc8e7788b924e211fcfa4a4c1d2f8503511661a.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This factors out ext4_mb_show_pa() function to show all the group's
preallocation info. This could be useful info to be added in later
patches.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8f07d890b0038dcc935e9c10e6043ec9f3792721.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Improve the debugging msg by also printing even if bb_free is 0.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c894f1d1d30f86ae38f4e3a861949665b6dc61cd.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We can't fail in the truncate path without requiring an fsck.
Add work around for this by using a combination of retry loops
and the __GFP_NOFAIL flag.
From: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Anna Pendleton <pendleton@google.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200507175028.15061-1-pendleton@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
'igrab(d_inode(dentry->d_parent))' without holding dentry->d_lock is
broken because without d_lock, d_parent can be concurrently changed due
to a rename(). Then if the old directory is immediately deleted, old
d_parent->inode can be NULL. That causes a NULL dereference in igrab().
To fix this, use dget_parent() to safely grab a reference to the parent
dentry, which pins the inode. This also eliminates the need to use
d_find_any_alias() other than for the initial inode, as we no longer
throw away the dentry at each step.
This is an extremely hard race to hit, but it is possible. Adding a
udelay() in between the reads of ->d_parent and its ->d_inode makes it
reproducible on a no-journal filesystem using the following program:
#include <fcntl.h>
#include <unistd.h>
int main()
{
if (fork()) {
for (;;) {
mkdir("dir1", 0700);
int fd = open("dir1/file", O_RDWR|O_CREAT|O_SYNC);
write(fd, "X", 1);
close(fd);
}
} else {
mkdir("dir2", 0700);
for (;;) {
rename("dir1/file", "dir2/file");
rmdir("dir1");
}
}
}
Fixes: d59729f4e794 ("ext4: fix races in ext4_sync_parent()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200506183140.541194-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
s/extnets/extents/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200503200647.154701-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If ext4_ext_convert_to_initialized() fails when called within
ext4_ext_handle_unwritten_extents(), immediately error out through the
exit point at function end. Fix the error handling in the event
ext4_ext_convert_to_initialized() returns 0, which it shouldn't do when
converting an existing extent. The current code returns the passed in
value of allocated (which is likely non-zero) while failing to set
m_flags, m_pblk, and m_len.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-5-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If the call to ext4_split_convert_extents() fails in the
EXT4_GET_BLOCKS_PRE_IO case within ext4_ext_handle_unwritten_extents(),
error out through the exit point at function end rather than jumping
through an intermediate point. Fix the error handling in the event
ext4_split_convert_extents() returns 0, which it shouldn't do when
splitting an existing extent. The current code returns the passed in
value of allocated (which is likely non-zero) while failing to set
m_flags, m_pblk, and m_len.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-4-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove the redundant code assigning values to ext4_map_blocks components
in ext4_ext_handle_unwritten_extents() for the EXT4_GET_BLOCKS_CONVERT
case, using the code at the function exit instead. Clean up and reorder
that code to eliminate more redundancy and improve readability.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200430185320.23001-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There's no call to ext4_map_blocks() in the current ext4 code with a
flags argument that combines EXT4_GET_BLOCKS_CONVERT and
EXT4_GET_BLOCKS_ZERO. Remove the code that corresponds to this case
from ext4_ext_handle_unwritten_extents().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200430185320.23001-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Don't ignore return values from ext4_ext_dirty, since the errors
indicate valid failures below Ext4. In all of the other instances of
ext4_ext_dirty calls, the error return value is handled in some
way. This patch makes those remaining couple of places to handle
ext4_ext_dirty errors as well. In case of ext4_split_extent_at(), the
ignorance of return value is intentional. The reason is that we are
already in error path and there isn't much we can do if ext4_ext_dirty
returns error. This patch adds a comment for that case explaining why
we ignore the return value.
In the longer run, we probably should
make sure that errors from other mark_dirty routines are handled as
well.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200427013438.219117-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Don't pass error pointers to brelse().
commit 7159a986b420 ("ext4: fix some error pointer dereferences") has fixed
some cases, fix the remaining one case.
Once ext4_xattr_block_find()->ext4_sb_bread() failed, error pointer is
stored in @bs->bh, which will be passed to brelse() in the cleanup
routine of ext4_xattr_set_handle(). This will then cause a NULL panic
crash in __brelse().
BUG: unable to handle kernel NULL pointer dereference at 000000000000005b
RIP: 0010:__brelse+0x1b/0x50
Call Trace:
ext4_xattr_set_handle+0x163/0x5d0
ext4_xattr_set+0x95/0x110
__vfs_setxattr+0x6b/0x80
__vfs_setxattr_noperm+0x68/0x1b0
vfs_setxattr+0xa0/0xb0
setxattr+0x12c/0x1a0
path_setxattr+0x8d/0xc0
__x64_sys_setxattr+0x27/0x30
do_syscall_64+0x60/0x250
entry_SYSCALL_64_after_hwframe+0x49/0xbe
In this case, @bs->bh stores '-EIO' actually.
Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: stable@kernel.org # 2.6.19
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1587628004-95123-1-git-send-email-jefflexu@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When we are evicting inode with journalled data, we may race with
transaction commit in the following way:
CPU0 CPU1
jbd2_journal_commit_transaction() evict(inode)
inode_io_list_del()
inode_wait_for_writeback()
process BJ_Forget list
__jbd2_journal_insert_checkpoint()
__jbd2_journal_refile_buffer()
__jbd2_journal_unfile_buffer()
if (test_clear_buffer_jbddirty(bh))
mark_buffer_dirty(bh)
__mark_inode_dirty(inode)
ext4_evict_inode(inode)
frees the inode
This results in use-after-free issues in the writeback code (or
the assertion added in the previous commit triggering).
Fix the problem by removing inode from writeback lists once all the page
cache is evicted and so inode cannot be added to writeback lists again.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200421085445.5731-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Ext4 needs to remove inode from writeback lists after it is out of
visibility of its journalling machinery (which can still dirty the
inode). Export inode_io_list_del() for it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200421085445.5731-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_orphan_get() invokes ext4_read_inode_bitmap(), which returns a
reference of the specified buffer_head object to "bitmap_bh" with
increased refcnt.
When ext4_orphan_get() returns, local variable "bitmap_bh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ext4_orphan_get(). When ext4_iget() fails, the function forgets to
decrease the refcnt increased by ext4_read_inode_bitmap(), causing a
refcnt leak.
Fix this issue by calling brelse() when ext4_iget() fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/1587618568-13418-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned
(-1) resulting in illegal memory accesses. Although there is no
consistent repro, we see that generic/019 sometimes crashes because of
this bug.
Ran gce-xfstests smoke and verified that there were no regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Fix the following coccicheck warning:
fs/ext4/extents_status.c:1057:5-28: WARNING: Comparison to bool
fs/ext4/inode.c:2314:18-24: WARNING: Comparison to bool
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200420042918.19459-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The eofblocks code was removed in the 5.7 release by "ext4: remove
EOFBLOCKS_FL and associated code" (4337ecd1fe99). The ext4_map_blocks()
flag used to trigger it can now be removed as well.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200415203140.30349-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fixed an if statement where braces were not needed.
Link: https://lore.kernel.org/r/20200416141456.1089-1-carlosteniswarrior@gmail.com
Signed-off-by: Carlos Guerrero Álvarez <carlosteniswarrior@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
|
|
In a 32-bit program, running on arm64 architecture. When the address
space below mmap base is completely exhausted, shmat() for huge pages will
return ENOMEM, but shmat() for normal pages can still success on no-legacy
mode. This seems not fair.
For normal pages, the calling trace of get_unmapped_area() is:
=> mm->get_unmapped_area()
if on legacy mode,
=> arch_get_unmapped_area()
=> vm_unmapped_area()
if on no-legacy mode,
=> arch_get_unmapped_area_topdown()
=> vm_unmapped_area()
For huge pages, the calling trace of get_unmapped_area() is:
=> file->f_op->get_unmapped_area()
=> hugetlb_get_unmapped_area()
=> vm_unmapped_area()
To solve this issue, we only need to make hugetlb_get_unmapped_area() take
the same way as mm->get_unmapped_area(). Add *bottomup() and *topdown()
for hugetlbfs, and check current mm->get_unmapped_area() to decide which
one to use. If mm->get_unmapped_area is equal to
arch_get_unmapped_area_topdown(), hugetlb_get_unmapped_area() calls
topdown routine, otherwise calls bottomup routine.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shijie Hu <hushijie3@huawei.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Chen Jie <chenjie6@huawei.com>
Link: http://lkml.kernel.org/r/20200518065338.113664-1-hushijie3@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
They're the same function, and for the purpose of all callers they are
equivalent to lru_cache_add().
[akpm@linux-foundation.org: fix it for local_lock changes]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-5-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull splice updates from Al Viro:
"Christoph's assorted splice cleanups"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: rename pipe_buf ->steal to ->try_steal
fs: make the pipe_buf_operations ->confirm operation optional
fs: make the pipe_buf_operations ->steal operation optional
trace: remove tracing_pipe_buf_ops
pipe: merge anon_pipe_buf*_ops
fs: simplify do_splice_from
fs: simplify do_splice_to
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"We have been discussing using pidfds to attach to namespaces for quite
a while and the patches have in one form or another already existed
for about a year. But I wanted to wait to see how the general api
would be received and adopted.
This contains the changes to make it possible to use pidfds to attach
to the namespaces of a process, i.e. they can be passed as the first
argument to the setns() syscall.
When only a single namespace type is specified the semantics are
equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
equals setns(pidfd, CLONE_NEWNET).
However, when a pidfd is passed, multiple namespace flags can be
specified in the second setns() argument and setns() will attach the
caller to all the specified namespaces all at once or to none of them.
Specifying 0 is not valid together with a pidfd. Here are just two
obvious examples:
setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
setns(pidfd, CLONE_NEWUSER);
Allowing to also attach subsets of namespaces supports various
use-cases where callers setns to a subset of namespaces to retain
privilege, perform an action and then re-attach another subset of
namespaces.
Apart from significantly reducing the number of syscalls needed to
attach to all currently supported namespaces (eight "open+setns"
sequences vs just a single "setns()"), this also allows atomic setns
to a set of namespaces, i.e. either attaching to all namespaces
succeeds or we fail without having changed anything.
This is centered around a new internal struct nsset which holds all
information necessary for a task to switch to a new set of namespaces
atomically. Fwiw, with this change a pidfd becomes the only token
needed to interact with a container. I'm expecting this to be
picked-up by util-linux for nsenter rather soon.
Associated with this change is a shiny new test-suite dedicated to
setns() (for pidfds and nsfds alike)"
* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/pidfd: add pidfd setns tests
nsproxy: attach to namespaces via pidfds
nsproxy: add struct nsset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most interesting part is the new mount api conversion, which is
actually a old patch already pending for several cycles. And the
others are recent trivial cleanups here.
Summary:
- Convert to use the new mount apis
- Some random cleanup patches"
* tag 'erofs-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: suppress false positive last_block warning
erofs: convert to use the new mount fs_context api
erofs: code cleanup by removing ifdef macro surrounding
|
|
Pull JFS update from David Kleikamp:
"Replace zero-length array in JFS"
* tag 'jfs-5.8' of git://github.com/kleikamp/linux-shaggy:
jfs: Replace zero-length array with flexible-array member
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- speedup dead root detection during orphan cleanup, eg. when there
are many deleted subvolumes waiting to be cleaned, the trees are
now looked up in radix tree instead of a O(N^2) search
- snapshot creation with inherited qgroup will mark the qgroup
inconsistent, requires a rescan
- send will emit file capabilities after chown, this produces a
stream that does not need postprocessing to set the capabilities
again
- direct io ported to iomap infrastructure, cleaned up and simplified
code, notably removing last use of struct buffer_head in btrfs code
Core changes:
- factor out backreference iteration, to be used by ordinary
backreferences and relocation code
- improved global block reserve utilization
* better logic to serialize requests
* increased maximum available for unlink
* improved handling on large pages (64K)
- direct io cleanups and fixes
* simplify layering, where cloned bios were unnecessarily created
for some cases
* error handling fixes (submit, endio)
* remove repair worker thread, used to avoid deadlocks during
repair
- refactored block group reading code, preparatory work for new type
of block group storage that should improve mount time on large
filesystems
Cleanups:
- cleaned up (and slightly sped up) set/get helpers for metadata data
structure members
- root bit REF_COWS got renamed to SHAREABLE to reflect the that the
blocks of the tree get shared either among subvolumes or with the
relocation trees
Fixes:
- when subvolume deletion fails due to ENOSPC, the filesystem is not
turned read-only
- device scan deals with devices from other filesystems that changed
ownership due to overwrite (mkfs)
- fix a race between scrub and block group removal/allocation
- fix long standing bug of a runaway balance operation, printing the
same line to the syslog, caused by a stale status bit on a reloc
tree that prevented progress
- fix corrupt log due to concurrent fsync of inodes with shared
extents
- fix space underflow for NODATACOW and buffered writes when it for
some reason needs to fallback to COW mode"
* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
btrfs: fix space_info bytes_may_use underflow during space cache writeout
btrfs: fix space_info bytes_may_use underflow after nocow buffered write
btrfs: fix wrong file range cleanup after an error filling dealloc range
btrfs: remove redundant local variable in read_block_for_search
btrfs: open code key_search
btrfs: split btrfs_direct_IO to read and write part
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
fs: remove dio_end_io()
btrfs: switch to iomap_dio_rw() for dio
iomap: remove lockdep_assert_held()
iomap: add a filesystem hook for direct I/O bio submission
fs: export generic_file_buffered_read()
btrfs: turn space cache writeout failure messages into debug messages
btrfs: include error on messages about failure to write space/inode caches
btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
btrfs: make checksum item extension more efficient
btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
btrfs: unexport btrfs_compress_set_level()
btrfs: simplify iget helpers
...
|
|
Pull DAX updates part two from Darrick Wong:
"This time around, we're hoisting the DONTCACHE flag from XFS into the
VFS so that we can make the incore DAX mode changes become effective
sooner.
We can't change the file data access mode on a live inode because we
don't have a safe way to change the file ops pointers. The incore
state change becomes effective at inode loading time, which can happen
if the inode is evicted. Therefore, we're making it so that
filesystems can ask the VFS to evict the inode as soon as the last
holder drops.
The per-fs changes to make this call this will be in subsequent pull
requests from Ted and myself.
Summary:
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly"
* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: Introduce DCACHE_DONTCACHE
fs: Lift XFS_IDONTCACHE to the VFS layer
|
|
Pull DAX updates part one from Darrick Wong:
"After many years of LKML-wrangling about how to enable programs to
query and influence the file data access mode (DAX) when a filesystem
resides on storage devices such as persistent memory, Ira Weiny has
emerged with a proposed set of standard behaviors that has not been
shot down by anyone! We're more or less standardizing on the current
XFS behavior and adapting ext4 to do the same.
This is the first of a handful pull requests that will make ext4 and
XFS present a consistent interface for user programs that care about
DAX. We add a statx attribute that programs can check to see if DAX is
enabled on a particular file. Then, we update the DAX documentation to
spell out the user-visible behaviors that filesystems will guarantee
(until the next storage industry shakeup). The on-disk inode flag has
been in XFS for a few years now.
Summary:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being
done via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and
application programmers can take advantage of the (still
experimental DAX) feature"
Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/
* tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation/dax: Update Usage section
fs/stat: Define DAX statx attribute
fs: Remove unneeded IS_DAX() check in io_is_direct()
|
|
Pull xfs updates from Darrick Wong:
"Most of the changes this cycle are refactoring of existing code in
preparation for things landing in the future.
We also fixed various problems and deficiencies in the quota
implementation, and (I hope) the last of the stale read vectors by
forcing write allocations to go through the unwritten state until the
write completes.
Summary:
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean
up other inode flush warts.
- Refactor log recovery so that each log item recovery functions now
live with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks,
since they're just part of the disk format now due to a historic
lack of log atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when
quotas are enabled.
- Refactor inode fork reading and verification to run directly from
the inode-from-disk function. This means that we now actually
guarantee that _iget'ted inodes are totally verified and ready to
go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a stale
disk contents exposure vector if the system goes down before the
write completes.
- More lockdep whackamole"
* tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (129 commits)
xfs: more lockdep whackamole with kmem_alloc*
xfs: force writes to delalloc regions to unwritten
xfs: refactor xfs_iomap_prealloc_size
xfs: measure all contiguous previous extents for prealloc size
xfs: don't fail unwritten extent conversion on writeback due to edquot
xfs: rearrange xfs_inode_walk_ag parameters
xfs: straighten out all the naming around incore inode tree walks
xfs: move xfs_inode_ag_iterator to be closer to the perag walking code
xfs: use bool for done in xfs_inode_ag_walk
xfs: fix inode ag walk predicate function return values
xfs: refactor eofb matching into a single helper
xfs: remove __xfs_icache_free_eofblocks
xfs: remove flags argument from xfs_inode_ag_walk
xfs: remove xfs_inode_ag_iterator_flags
xfs: remove unused xfs_inode_ag_iterator function
xfs: replace open-coded XFS_ICI_NO_TAG
xfs: move eofblocks conversion function to xfs_ioctl.c
xfs: allow individual quota grace period extension
xfs: per-type quota timers and warn limits
xfs: switch xfs_get_defquota to take explicit type
...
|
