| Age | Commit message (Collapse) | Author |
|---|
|
The tcons created by cifs_construct_tcon() on multiuser mounts must
also be able to failover and refresh DFS referrals, so set the
appropriate fields in order to get a full DFS tcon. They could be
shared among different superblocks later, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021518.3Xu2VU4s-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid refreshing DFS referral with refpath_lock acquired as the I/O
could block for a while due to a potentially disconnected or slow DFS
root server and then making other threads - that use same @server and
don't require a DFS root server - unable to make any progress.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021527.ZlRkIxgv-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When we're engaged in local caching of a cifs filesystem, we cannot perform
caching of a partially written cache granule unless we can read the rest of
the granule. This can result in unexpected access errors being reported to
the user.
Fix this by the following: if a file is opened O_WRONLY locally, but the
mount was given the "-o fsc" flag, try first opening the remote file with
GENERIC_READ|GENERIC_WRITE and if that returns -EACCES, try dropping the
GENERIC_READ and doing the open again. If that last succeeds, invalidate
the cache for that file as for O_DIRECT.
Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2_GLOBAL_CAP_ENCRYPTION flag should be used only for 3.0 and
3.0.2 dialects. This flags set cause compatibility problems with
other SMB clients.
Reported-by: James Christopher Adduono <jc@adduono.com>
Tested-by: James Christopher Adduono <jc@adduono.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc
response to ksmbd kernel server. ksmbd should validate payload size of
ipc response from ksmbd.mountd to avoid memory overrun or
slab-out-of-bounds. This patch validate 3 ipc response that has payload.
Cc: stable@vger.kernel.org
Reported-by: Chao Ma <machao2019@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't send oplock break if rename fails. This patch fix
smb2.oplock.batch20 test.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new watermark, higher priority than BCH_WATERMARK_reclaim,
for interior btree updates. We've seen a deadlock where journal replay
triggers a ton of btree node merges, and these use up all available open
buckets and then interior updates get stuck.
One cause of this is that we're currently lacking btree node merging on
write buffer btrees - that needs to be fixed as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Sign error when checking the watermark - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There's an issue that if special files is created before quota
project is enabled, then it's not possible to link this file. This
works fine for normal files. This happens because xfs_quota skips
special files (no ioctls to set necessary flags). The check for
having the same project ID for source and destination then fails as
source file doesn't have any ID.
mkfs.xfs -f /dev/sda
mount -o prjquota /dev/sda /mnt/test
mkdir /mnt/test/foo
mkfifo /mnt/test/foo/fifo1
xfs_quota -xc "project -sp /mnt/test/foo 9" /mnt/test
> Setting up project 9 (path /mnt/test/foo)...
> xfs_quota: skipping special file /mnt/test/foo/fifo1
> Processed 1 (/etc/projects and cmdline) paths for project 9 with recursion depth infinite (-1).
ln /mnt/test/foo/fifo1 /mnt/test/foo/fifo1_link
> ln: failed to create hard link '/mnt/test/testdir/fifo1_link' => '/mnt/test/testdir/fifo1': Invalid cross-device link
mkfifo /mnt/test/foo/fifo2
ln /mnt/test/foo/fifo2 /mnt/test/foo/fifo2_link
Fix this by allowing linking of special files to the project quota
if special files doesn't have any ID set (ID = 0).
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
overlapping extent repair was colliding with extent past end of inode
checks - don't update "extent ends at" until we know we have an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were missing an iter_traverse().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If something is wrong with a logged op, we just want to delete it -
there's nothing to repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds opts.recovery_pass_limit, and redoes -o norecovery to make use
of it; this fixes some issues with -o norecovery so it can be safely
used for data recovery.
Norecovery means "don't do journal replay"; it's an important data
recovery tool when we're getting stuck in journal replay.
When using it this way we need to make sure we don't free journal keys
after startup, so we continue to overlay them: thus it needs to imply
retain_recovery_info, as well as nochanges.
recovery_pass_limit is an explicit option for telling recovery to exit
after a specific recovery pass; this is a much cleaner way of
implementing -o norecovery, as well as being a useful debug feature in
its own right.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Flag that we need to run a recovery pass and run it - persistenly, so if
we crash it'll still get run.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This makes bch_sb_field_ext more consistent with the rest of -o
nochanges - we don't want to be varying other codepaths based on -o
nochanges, since it's used for testing in dry run mode; also fixes some
potential null ptr derefs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Finishing logged ops requires the filesystem to be in a reasonably
consistent state - and other fsck passes don't require it to have
completed, so just run it last.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We've grown a fair amount of code for managing recovery passes; tracking
which ones we're running, which ones need to be run, and flagging in the
superblock which ones need to be run on the next recovery.
So it's worth splitting out into its own file, this code is pretty
different from the code in recovery.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we haven't yet allocated any btree nodes for a given btree, we
first need to call the regular split path to allocate one.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Remove some duplication, and inconsistency between check_fix_ptrs and
the main ptr marking paths
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When dropping keys now outside a now because we're changing the node
min/max, we need to redo the node's accounting as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
when writing file with direct_IO on bcachefs, then performance is
much lower than other fs due to write back throttle in block layer:
wbt_wait+1
__rq_qos_throttle+32
blk_mq_submit_bio+394
submit_bio_noacct_nocheck+649
bch2_submit_wbio_replicas+538
__bch2_write+2539
bch2_direct_write+1663
bch2_write_iter+318
aio_write+355
io_submit_one+1224
__x64_sys_io_submit+169
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+110
add set REQ_SYNC and REQ_IDLE in bio->bi_opf as standard dirct-io
Signed-off-by: zhuxiaohui <zhuxiaohui.400@bytedance.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Consolidate bch2_gc_check_topology() and btree_node_interior_verify(),
and replace them with an improved version,
bch2_btree_node_check_topology().
This checks that children of an interior node correctly span the full
range of the parent node with no overlaps.
Also, ensure that topology repairs at runtime are always a fatal error;
in particular, this adds a check in btree_iter_down() - if we don't find
a key while walking down the btree that's indicative of a topology error
and should be flagged as such, not a null ptr deref.
Some checks in btree_update_interior.c remaining BUG_ONS(), because we
already checked the node for topology errors when starting the update,
and the assertions indicate that we _just_ corrupted the btree node -
i.e. the problem can't be that existing on disk corruption, they
indicate an actual algorithmic bug.
In the future, we'll be annotating the fsck errors list with which
recovery pass corrects them; the open coded "run explicit recovery pass
or fatal error" in bch2_btree_node_check_topology() will in the future
be done for every fsck_err() call.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't pick a pivot that's going to be deleted.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_and_journal_iter is now safe to use at runtime, not just during
recovery before journal keys have been freed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The old code doesn't consider the mem alloced from mempool when call
krealloc on trans->mem. Also in bch2_trans_put, using mempool_free to
free trans->mem by condition "trans->mem_bytes == BTREE_TRANS_MEM_MAX"
is inaccurate when trans->mem was allocated by krealloc function.
Instead, we use used_mempool stuff to record the situation, and realloc
or free the trans->mem in elegant way.
Also, after krealloc failed in __bch2_trans_kmalloc, the old data
should be copied to the new buffer when alloc from mempool_alloc.
Fixes: 31403dca5bb1 ("bcachefs: optimize __bch2_trans_get(), kill DEBUG_TRANSACTIONS")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't normally do extent updates this early in recovery, but some of
the repair paths have to and when we do, we don't want to do anything
that requires the snapshots table.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we assumed that keys were consistent with the snapshots
btree - but that's not correct as fsck may not have been run or may not
be complete.
This adds checks and error handling when using the in-memory snapshots
table (that mirrors the snapshots btree).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to add bounds checking for snapshot table accesses - it turns
out there are cases where we do need to use the snapshots table before
fsck checks have completed (and indeed, fsck may not have been run).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
before:
u64s 18 type inode_v3 0:1879048192:U32_MAX len 0 ver 0: mode=40700
flags= (15300000)
journal_seq=4
bi_size=0
bi_sectors=0
bi_version=0bi_atime=227064388944
...
after:
u64s 18 type inode_v3 0:1879048192:U32_MAX len 0 ver 0: mode=40700
flags= (15300000)
journal_seq=4
bi_size=0
bi_sectors=0
bi_version=0
bi_atime=227064388944
...
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree write buffer flush has two phases
- in natural key order, which is more efficient but may fail
- then in journal order
The journal order flush was assuming that keys were still correctly
ordered by journal sequence number - but due to coalescing by the
previous phase, we need an additional sort.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Backpointers that point to invalid devices are caught by fsck, not
.key_invalid; so .key_invalid needs to check for them instead of hitting
asserts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
In cifssmb.c:
Using strncpy with a length argument equal to strlen(src) is generally
dangerous because it can cause string buffers to not be NUL-terminated.
In this case, however, there was extra effort made to ensure the buffer
was NUL-terminated via a manual NUL-byte assignment. In an effort to rid
the kernel of strncpy() use, let's swap over to using strscpy() which
guarantees NUL-termination on the destination buffer.
To handle the case where ea_name is NULL, let's use the ?: operator to
substitute in an empty string, thereby allowing strscpy to still
NUL-terminate the destintation string.
Interesting note: this flex array buffer may go on to also have some
value encoded after the NUL-termination:
| if (ea_value_len)
| memcpy(parm_data->list.name + name_len + 1,
| ea_value, ea_value_len);
Now for smb2ops.c and smb2transport.c:
Both of these cases are simple, strncpy() is used to copy string
literals which have a length less than the destination buffer's size. We
can simply swap in the new 2-argument version of strscpy() introduced in
Commit e6584c3964f2f ("string: Allow 2-argument strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull xfs fixes from Chandan Babu:
- Allow stripe unit/width value passed via mount option to be written
over existing values in the super block
- Do not set current->journal_info to avoid its value from being miused
by another filesystem context
* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't use current->journal_info
xfs: allow sunit mount option to repair bad primary sb stripe values
|
|
Pull smb client fixes from Steve French:
- Add missing trace point (noticed when debugging the recent mknod LSM
regression)
- fscache fix
* tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix duplicate fscache cookie warnings
smb3: add trace event for mknod
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address three recently introduced regressions
* tag 'nfsd-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: CREATE_SESSION must never cache NFS4ERR_DELAY replies
SUNRPC: Revert 561141dd494382217bace4d1a51d08168420eace
nfsd: Fix error cleanup path in nfsd_rename()
|
