| Age | Commit message (Collapse) | Author |
|---|
|
With just one preallocated workspace we can guarantee forward progress
even if there's no memory available for new workspaces. The cost is more
waiting but we also get rid of several error paths.
On average, there will be several idle workspaces, so the waiting
penalty won't be so bad.
In the worst case, all cpus will compete for one workspace until there's
some memory. Attempts to allocate a new one are done each time the
waiters are woken up.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Preallocate one workspace for each compression type so we can guarantee
forward progress in the worst case. A failure cannot be a hard error as
we might not use compression at all on the filesystem. If we can't
allocate the workspaces later when need them, it might actually
deadlock, but in such situation the system has effectively not enough
memory to operate properly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The names are confusing, pick more fitting names and add comments.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Masking HIGHMEM out of NOFS does not make sense.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we lack the identification of the filesystem in most if not
all mount messages, done via printk/pr_* functions. We can use the
btrfs_* helpers in open_ctree, as the fs_info <-> sb link is established
at the beginning of the function.
The messages have been updated at the same time to be more consistent:
* dropped sb->s_id, as it's not available via btrfs_*
* added %d for return code where appropriate
* wording changed
* %Lx replaced by %llx
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
"cat /proc/$pid/wchan""
This reverts the 4.6-rc1 commit 7e2bc81da333 ("proc/base: make prompt
shell start from new line after executing "cat /proc/$pid/wchan")
because it breaks /proc/$PID/whcan formatting in ps and top.
Revert also because the patch is inconsistent - it adds a newline at the
end of only the '0' wchan, and does not add a newline when
/proc/$PID/wchan contains a symbol name.
eg.
$ ps -eo pid,stat,wchan,comm
PID STAT WCHAN COMMAND
...
1189 S - dbus-launch
1190 Ssl 0
dbus-daemon
1198 Sl 0
lightdm
1299 Ss ep_pol systemd
1301 S - (sd-pam)
1304 Ss wait sh
Signed-off-by: Robin Humble <plaguedbypenguins@gmail.com>
Cc: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In netdevice.h we removed the structure in net-next that is being
changes in 'net'. In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.
The mlx5 conflicts have to do with vxlan support dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Patch summary:
When showing a cgroupfs entry in mountinfo, show the path of the mount
root dentry relative to the reader's cgroup namespace root.
Short explanation (courtesy of mkerrisk):
If we create a new cgroup namespace, then we want both /proc/self/cgroup
and /proc/self/mountinfo to show cgroup paths that are correctly
virtualized with respect to the cgroup mount point. Previous to this
patch, /proc/self/cgroup shows the right info, but /proc/self/mountinfo
does not.
Long version:
When a uid 0 task which is in freezer cgroup /a/b, unshares a new cgroup
namespace, and then mounts a new instance of the freezer cgroup, the new
mount will be rooted at /a/b. The root dentry field of the mountinfo
entry will show '/a/b'.
cat > /tmp/do1 << EOF
mount -t cgroup -o freezer freezer /mnt
grep freezer /proc/self/mountinfo
EOF
unshare -Gm bash /tmp/do1
> 330 160 0:34 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime - cgroup cgroup rw,freezer
> 355 133 0:34 /a/b /mnt rw,relatime - cgroup freezer rw,freezer
The task's freezer cgroup entry in /proc/self/cgroup will simply show
'/':
grep freezer /proc/self/cgroup
9:freezer:/
If instead the same task simply bind mounts the /a/b cgroup directory,
the resulting mountinfo entry will again show /a/b for the dentry root.
However in this case the task will find its own cgroup at /mnt/a/b,
not at /mnt:
mount --bind /sys/fs/cgroup/freezer/a/b /mnt
130 25 0:34 /a/b /mnt rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,freezer
In other words, there is no way for the task to know, based on what is
in mountinfo, which cgroup directory is its own.
Example (by mkerrisk):
First, a little script to save some typing and verbiage:
echo -e "\t/proc/self/cgroup:\t$(cat /proc/self/cgroup | grep freezer)"
cat /proc/self/mountinfo | grep freezer |
awk '{print "\tmountinfo:\t\t" $4 "\t" $5}'
Create cgroup, place this shell into the cgroup, and look at the state
of the /proc files:
2653
2653 # Our shell
14254 # cat(1)
/proc/self/cgroup: 10:freezer:/a/b
mountinfo: / /sys/fs/cgroup/freezer
Create a shell in new cgroup and mount namespaces. The act of creating
a new cgroup namespace causes the process's current cgroups directories
to become its cgroup root directories. (Here, I'm using my own version
of the "unshare" utility, which takes the same options as the util-linux
version):
Look at the state of the /proc files:
/proc/self/cgroup: 10:freezer:/
mountinfo: / /sys/fs/cgroup/freezer
The third entry in /proc/self/cgroup (the pathname of the cgroup inside
the hierarchy) is correctly virtualized w.r.t. the cgroup namespace, which
is rooted at /a/b in the outer namespace.
However, the info in /proc/self/mountinfo is not for this cgroup
namespace, since we are seeing a duplicate of the mount from the
old mount namespace, and the info there does not correspond to the
new cgroup namespace. However, trying to create a new mount still
doesn't show us the right information in mountinfo:
# propagating to other mountns
/proc/self/cgroup: 7:freezer:/
mountinfo: /a/b /mnt/freezer
The act of creating a new cgroup namespace caused the process's
current freezer directory, "/a/b", to become its cgroup freezer root
directory. In other words, the pathname directory of the directory
within the newly mounted cgroup filesystem should be "/",
but mountinfo wrongly shows us "/a/b". The consequence of this is
that the process in the cgroup namespace cannot correctly construct
the pathname of its cgroup root directory from the information in
/proc/PID/mountinfo.
With this patch, the dentry root field in mountinfo is shown relative
to the reader's cgroup namespace. So the same steps as above:
/proc/self/cgroup: 10:freezer:/a/b
mountinfo: / /sys/fs/cgroup/freezer
/proc/self/cgroup: 10:freezer:/
mountinfo: /../.. /sys/fs/cgroup/freezer
/proc/self/cgroup: 10:freezer:/
mountinfo: / /mnt/freezer
cgroup.clone_children freezer.parent_freezing freezer.state tasks
cgroup.procs freezer.self_freezing notify_on_release
3164
2653 # First shell that placed in this cgroup
3164 # Shell started by 'unshare'
14197 # cat(1)
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Lots of Idiotic Silly Parentheses is -> that way... What that
condition checks is that there's exactly 32 bytes between the
end of name and the end of entire drectory record.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and make that weird ioctl lock directory only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
don't need to lock directory in ->llseek(), either
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
use d_alloc_parallel() for sillyunlink/lookup exclusion and
explicit rwsem (nfs_rmdir() being a writer and nfs_call_unlink() -
a reader) for rmdir/sillyunlink one.
That ought to make lookup/readdir/!O_CREAT atomic_open really
parallel on NFS.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There's no guarantee that an IP address in a different network namespace
actually represents the same endpoint.
Also, if we allow unprivileged nfs mounts some day then this might allow
an unprivileged user in another network namespace to misdirect somebody
else's nfs mounts.
If sharing between containers is really what's wanted then that could
still be arranged explicitly, for example with bind mounts.
Reported-by: "Eric W. Biederman" <ebiederm@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
At Connectathon 2016, we found that recent upstream Linux clients
would occasionally send a LOCK operation with a zero stateid. This
appeared to happen in close proximity to another thread returning
a delegation before unlinking the same file while it remained open.
Earlier, the client received a write delegation on this file and
returned the open stateid. Now, as it is getting ready to unlink the
file, it returns the write delegation. But there is still an open
file descriptor on that file, so the client must OPEN the file
again before it returns the delegation.
Since commit 24311f884189 ('NFSv4: Recovery of recalled read
delegations is broken'), nfs_open_delegation_recall() clears the
NFS_DELEGATED_STATE flag _before_ it sends the OPEN. This allows a
racing LOCK on the same inode to be put on the wire before the OPEN
operation has returned a valid open stateid.
To eliminate this race, serialize delegation return with the
acquisition of a file lock on the same file. Adopt the same approach
as is used in the unlock path.
This patch also eliminates a similar race seen when sending a LOCK
operation at the same time as returning a delegation on the same file.
Fixes: 24311f884189 ('NFSv4: Recovery of recalled read ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Anna: Add sentence about LOCK / delegation race]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A mirror can be shared between multiple layouts, even with different
iomodes. That makes stats gathering simpler, but it causes a problem
when we get different creds in READ vs. RW layouts.
The current code drops the newer credentials onto the floor when this
occurs. That's problematic when you fetch a READ layout first, and then
a RW. If the READ layout doesn't have the correct creds to do a write,
then writes will fail.
We could just overwrite the READ credentials with the RW ones, but that
would break the ability for the server to fence the layout for reads if
things go awry. We need to be able to revert to the earlier READ creds
if the RW layout is returned afterward.
The simplest fix is to just keep two sets of creds per mirror. One for
READ layouts and one for RW, and then use the appropriate set depending
on the iomode of the layout segment.
Also fix up some RCU nits that sparse found.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We're just as likely to have allocation problems here as we would if we
delay looking up the credential like we currently do. Fix the code to
get a rpc_cred reference early, as soon as the mirror is set up.
This allows us to eliminate the mirror early if there is a problem
getting an rpc credential. This also allows us to drop the uid/gid
from the layout_mirror struct as well.
In the event that we find an existing mirror where this one would go, we
swap in the new creds unconditionally, and drop the reference to the old
one.
Note that the old ff_layout_update_mirror_cred function wouldn't set
this pointer unless the DS version was 3, but we don't know what the DS
version is at this point. I'm a little unclear on why it did that as you
still need creds to talk to v4 servers as well. I have the code set
it regardless of the DS version here.
Also note the change to using generic creds instead of calling
lookup_cred directly. With that change, we also need to populate the
group_info pointer in the acred as some functions expect that to never
be NULL. Instead of allocating one every time however, we can allocate
one when the module is loaded and share it since the group_info is
refcounted.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In later patches, we're going to want to allow the creds to be updated
when we get a new layout with updated creds. Have this function take
a reference to the cred that is later put once the call has been
dispatched.
Also, prepare for this change by ensuring we follow RCU rules when
getting a reference to the cred as well.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
All the callers already call that function before calling into here,
so it ends up being a no-op anyway.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit ea2cf22 created nfs_commit_info and saved &inode->i_lock inside
this NFS specific structure. This obscures the usage of i_lock.
Instead, save struct inode * so later it's clear the spinlock taken is
i_lock.
Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This will pop a warning if we count too many good bytes.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Like other resend paths, mark the (old) hdr as NFS_IOHDR_REDO. This
ensures the hdr completion function will not count the (old) hdr
as good bytes.
Also, vector the error back through the hdr->task.tk_status like other
retry calls.
This fixes a bug with the FlexFiles layout where libaio was reporting more
bytes read than requested.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
UBSAN: Undefined behaviour in fs/btrfs/extent-tree.c:4623:21
signed integer overflow:
10808 * 262144 cannot be represented in type 'int [8]'
If 8192<=items<16384, we request a writeback of an insane number of pages
which is benign (everything will be written). But if items>=16384, the
space reservation won't be enough.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Payloads of NM entries are not supposed to contain NUL. When we run
into such, only the part prior to the first NUL goes into the
concatenation (i.e. the directory entry name being encoded by a bunch
of NM entries). We do stop when the amount collected so far + the
claimed amount in the current NM entry exceed 254. So far, so good,
but what we return as the total length is the sum of *claimed*
sizes, not the actual amount collected. And that can grow pretty
large - not unlimited, since you'd need to put CE entries in
between to be able to get more than the maximum that could be
contained in one isofs directory entry / continuation chunk and
we are stop once we'd encountered 32 CEs, but you can get about 8Kb
easily. And that's what will be passed to readdir callback as the
name length. 8Kb __copy_to_user() from a buffer allocated by
__get_free_page()
Cc: stable@vger.kernel.org # 0.98pl6+ (yes, really)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Previously f2fs_preallocate_blocks() tries to allocate unaligned blocks.
In f2fs_write_begin(), however, prepare_write_begin() does not skip its
allocation due to (len != 4KB).
So, it needs locking node page twice unexpectedly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch enables reading node blocks in advance when truncating large
data blocks.
> time rm $MNT/testfile (500GB) after drop_cachees
Before : 9.422 s
After : 4.821 s
Reported-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch is to improve the expand_inode speed in fallocate by allocating
data blocks as many as possible in single locked node page.
In SSD,
# time fallocate -l 500G $MNT/testfile
Before : 1m 33.410 s
After : 24.758 s
Reported-by: Stephen Bates <stephen.bates@microsemi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When testing f2fs with inline_dentry option, generic/342 reports:
VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day...
After rmmod f2fs module, kenrel shows following dmesg:
=============================================================================
BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080
CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276
c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463
616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065
Call Trace:
[<c13a83a0>] dump_stack+0x5f/0x8f
[<c11c7276>] slab_err+0x76/0x80
[<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0
[<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0
[<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0
[<c1198a38>] kmem_cache_destroy+0x158/0x1f0
[<c176b43d>] ? mutex_unlock+0xd/0x10
[<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs]
[<c10f596c>] SyS_delete_module+0x16c/0x1d0
[<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0
[<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20
[<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210
[<c10ad50b>] ? trace_hardirqs_off+0xb/0x10
[<c1001b81>] do_fast_syscall_32+0xa1/0x1c0
[<c176d888>] sysenter_past_esp+0x45/0x74
INFO: Object 0xd1e6d9e0 @offset=6624
kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects
CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7
c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14
f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266
Call Trace:
[<c13a83a0>] dump_stack+0x5f/0x8f
[<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0
[<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs]
[<c10f596c>] SyS_delete_module+0x16c/0x1d0
[<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0
[<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20
[<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210
[<c10ad50b>] ? trace_hardirqs_off+0xb/0x10
[<c1001b81>] do_fast_syscall_32+0xa1/0x1c0
[<c176d888>] sysenter_past_esp+0x45/0x74
The reason is: in recovery flow, we use delayed iput mechanism for directory
which has recovered dentry block. It means the reference of inode will be
held until last dirty dentry page being writebacked.
But when we mount f2fs with inline_dentry option, during recovery, dirent
may only be recovered into dir inode page rather than dentry page, so there
are no chance for us to release inode reference in ->writepage when
writebacking last dentry page.
We can call paired iget/iput explicityly for inline_dentry case, but for
non-inline_dentry case, iput will call writeback_single_inode to write all
data pages synchronously, but during recovery, ->writepages of f2fs skips
writing all pages, result in losing dirent.
This patch fixes this issue by obsoleting old mechanism, and introduce a
new dir_list to hold all directory inodes which has recovered datas until
finishing recovery.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch allows fscrypto to handle a second key prefix given by filesystem.
The main reason is to provide backward compatibility, since previously f2fs
used "f2fs:" as a crypto prefix instead of "fscrypt:".
Later, ext4 should also provide key_prefix() to give "ext4:".
One concern decribed by Ted would be kinda double check overhead of prefixes.
In x86, for example, validate_user_key consumes 8 ms after boot-up, which turns
out derive_key_aes() consumed most of the time to load specific crypto module.
After such the cold miss, it shows almost zero latencies, which treats as a
negligible overhead.
Note that request_key() detects wrong prefix in prior to derive_key_aes() even.
Cc: Ted Tso <tytso@mit.edu>
Cc: stable@vger.kernel.org # v4.6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The following panic occurs when truncating inode which has inline
xattr to max filesize.
[<ffffffffa013d3be>] get_dnode_of_data+0x4e/0x580 [f2fs]
[<ffffffffa013aca1>] ? read_node_page+0x51/0x90 [f2fs]
[<ffffffffa013ad99>] ? get_node_page.part.34+0xb9/0x170 [f2fs]
[<ffffffffa01235b1>] truncate_blocks+0x131/0x3f0 [f2fs]
[<ffffffffa01238e3>] f2fs_truncate+0x73/0x100 [f2fs]
[<ffffffffa01239d2>] f2fs_setattr+0x62/0x2a0 [f2fs]
[<ffffffff811a72c8>] notify_change+0x158/0x300
[<ffffffff8118a42b>] do_truncate+0x6b/0xa0
[<ffffffff8118e539>] ? __sb_start_write+0x49/0x100
[<ffffffff8118a798>] do_sys_ftruncate.constprop.12+0x118/0x170
[<ffffffff8118a82e>] SyS_ftruncate+0xe/0x10
[<ffffffff8169efcf>] tracesys+0xe1/0xe6
[<ffffffffa0139ae0>] get_node_path+0x210/0x220 [f2fs]
<ffff880206a89ce8>
--[ end trace 5fea664dfbcc6625 ]---
The reason is truncate_blocks tries to truncate all node and data blocks
start from specified block offset with value of (max filesize / block
size), but actually, our valid max block offset is (max filesize / block
size) - 1, so f2fs detects such invalid block offset with BUG_ON in
truncation path.
This patch lets f2fs skip truncating data which is exceeding max
filesize.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Currently, generic_block_bmap is used in f2fs_bmap, its semantics is when
the mapping is been found, return position of target physical block,
otherwise return zero.
But, previously, when there is no mapping info for specified logical block,
f2fs_bmap will map target physical block to a uninitialized variable, which
should be wrong. Fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch removes an obsolete variable used in add_free_nid.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Even if an inode failed to release its blocks, it should be kept in an orphan
inode list, so it will be released later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Restructure struct seg_entry to eliminate holes in it, after that,
in 32-bits machine, it reduces size from 32 bytes to 24 bytes; in
64-bits machine, it reduces size from 56 bytes to 40 bytes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Reuse get_extent_info for readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Each of fields in struct f2fs_xattr_entry will be assigned later,
so previously we don't need to memset the struct.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In find_fsync_dnodes, get_tmp_page will read dnode page synchronously,
previously, ra_meta_page did the same work, which is redundant, remove
it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch modifies to retry truncating node blocks in -ENOMEM case.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When unmounting filesystem, we should release all the ino entries.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch fixes a couple of bugs regarding to orphan inodes when handling
errors.
This tries to
- call alloc_nid_done with add_orphan_inode in handle_failed_inode
- let truncate blocks in f2fs_evict_inode
- not make a bad inode due to i_mode change
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch injects ENOSPC failures.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds page allocation failures.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
