| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Same as single_open(), but preallocates the buffer of given size.
Doesn't make any sense for sizes up to PAGE_SIZE and doesn't make
sense if output of show() exceeds PAGE_SIZE only rarely - seq_read()
will take care of growing the buffer and redoing show(). If you
_know_ that it will be large, it might make more sense to look into
saner iterator, rather than go with single-shot one. If that's
impossible, single_open_size() might be for you.
Again, don't use that without a good reason; occasionally that's really
the best way to go, but very often there are better solutions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just have it pinned in dcache all along and let procfs ->kill_sb()
drop it before kill_anon_super().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
and rename __free_pipe_info() to free_pipe_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
not used anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's used only as a flag to distinguish normal pipes/FIFOs from the
internal per-task one used by file-to-file splice. And pipe->files
would work just as well for that purpose...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
fs/pipe.c file_operations methods *know* that pipe is not an internal one;
no need to check pipe->inode for those callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simplify get_pipe_info(), while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
now it can be done - put mutex into pipe_inode_info, use it instead
of ->i_mutex
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* new field - pipe->files; number of struct file over that pipe (all
sharing the same inode, of course); protected by inode->i_lock.
* pipe_release() decrements pipe->files, clears inode->i_pipe when
if the counter has reached 0 (all under ->i_lock) and, in that case,
frees pipe after having done pipe_unlock()
* fifo_open() starts with grabbing ->i_lock, and either bumps pipe->files
if ->i_pipe was non-NULL or allocates a new pipe (dropping and regaining
->i_lock) and rechecks ->i_pipe; if it's still NULL, inserts new pipe
there, otherwise bumps ->i_pipe->files and frees the one we'd allocated.
At that point we know that ->i_pipe is non-NULL and won't go away, so
we can do pipe_lock() on it and proceed as we used to. If we end up
failing, decrement pipe->files and if it reaches 0 clear ->i_pipe and
free the sucker after pipe_unlock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* use the fact that file_inode(file)->i_pipe doesn't change
while the file is opened - no locks needed to access that.
* switch to pipe_lock/pipe_unlock where it's easy to do
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and take to fs/read_write.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... so that writev(2) doesn't miss it. Get rid of hpfs_file_write().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
look for file_capable() in there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and provide namespace_lock() as a trivial wrapper;
switch to those two consistently.
Result is patterned after rtnl_lock/rtnl_unlock pair.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
which allows to kill the last argument of umount_tree() and make release_mounts()
static.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... it's always &unmounted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
global list of release_mounts() fodder, protected by namespace_sem;
eventually, all umount_tree() callers will use it as kill list.
Helper picking the contents of that list, releasing namespace_sem
and doing release_mounts() on what it got.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
do_loopback calls lock_mount(path) and forget to unlock_mount
if clone_mnt or copy_mnt fails.
[ 77.661566] ================================================
[ 77.662939] [ BUG: lock held when returning to user space! ]
[ 77.664104] 3.9.0-rc5+ #17 Not tainted
[ 77.664982] ------------------------------------------------
[ 77.666488] mount/514 is leaving the kernel with locks still held!
[ 77.668027] 2 locks held by mount/514:
[ 77.668817] #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [<ffffffff811cca22>] lock_mount+0x32/0xe0
[ 77.671755] #1: (&namespace_sem){+++++.}, at: [<ffffffff811cca3a>] lock_mount+0x4a/0xe0
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
just what it sounds like; do that only to procfs subtrees you've
created - doing that to something shared with another driver is
not only antisocial, but might cause interesting races with
proc_create() and its ilk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch introduces an UAPI header for the SCTP protocol,
so that we can facilitate the maintenance and development of
user land applications or libraries, in particular in terms
of header synchronization.
To not break compatibility, some fragments from lksctp-tools'
netinet/sctp.h have been carefully included, while taking care
that neither kernel nor user land breaks, so both compile fine
with this change (for lksctp-tools I tested with the old
netinet/sctp.h header and with a newly adapted one that includes
the uapi sctp header). lksctp-tools smoke test run through
successfully as well in both cases.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't hold the NFSv4 sequence id while we check for open permission.
The call to ACCESS may block due to reboot recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Estimate of 27 credits for allocation of a block in extent based inode
is unnecessarily high. We can easily argue 20 is enough.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Improve mb_free_blocks speed by clearing entire range at once instead
of iterating over each bit. Freeing block-by-block also makes buddy
bitmap subtree flip twice making most of the work a no-op. Very few
bits in buddy bitmap require change, e.g. freeing entire group is a 1
bit flip only. As a result, releasing blocks of 60G file now takes
5ms instead of 2.7s. This is especially good for non-preemptive
kernels as there is no rescheduling during release.
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Values stored in s_freeclusters_counter and s_dirtyclusters_counter
are both in cluster units. Remove the cluster to block conversion
applied to s_freeclusters_counter causing an inflated estimate of
free space because s_dirtyclusters_counter is not similarly
converted. Rename free_blocks and dirty_blocks to better reflect
the units these variables contain to avoid future confusion. This
fix corrects ENOSPC failures for xfstests 127 and 231 on bigalloc
file systems.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We didn't mark hidden quota files with S_NOQUOTA flag and thus quota was
accounted even for quota files. Thus we could recurse back to quota code
when adding new blocks to quota file which can easily deadlock. Mark
hidden quota files properly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Don't actually close any opens until we don't need them at all.
This means being left with write access when it's not really necessary,
but that's better than putting a file that might still have posix locks
held on it, as we have been.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
In the 4.1 case we're supposed to release lockowners as soon as they're
no longer used.
It would probably be more efficient to reference count them, but that's
slightly fiddly due to the need to have callbacks from locks.c to take
into account lock merging and splitting.
For most cases just scanning the inode's lock list on unlock for
matching locks will be sufficient.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
More logic that's unnecessary in the 4.1 case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The replay_owner will never be used in the sessions case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Fix typo mistakes.
1. I think that it should be 'L' instead of 'V'.
2. and try to fix 'Front' instead of 'Frone'
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In order to be aware of prefree and free sections during FG_GC, let's start with
write_checkpoint().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
If (ofs % (NIDS_PER_BLOCK + 1) == 0), the node is an indirect node block.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
