Age | Commit message (Collapse) | Author |
|
not just if CONFIG_CIFS_DEBUG2 is enabled.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change return from int to void of convert_ace_to_cifs_ace as it never
fails.
fixes below issue reported by coccicheck
fs/cifs/cifssmb.c:3606:7-9: Unneeded variable: "rc". Return "0" on line
3620
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
query on disk id structure definition was missing
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Field ia_valid is being debugged with the field name iavalid, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Trivial cleanup. Will make future multichannel code smaller
as well.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
KEYS is required not that CONFIG_CIFS_ACL is always on
and the ifdef for it removed.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB3 ACL support is needed for many use cases now and should not be
ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL
ifdef so ACL support is always built into cifs.ko
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we mount the same share twice, we check the flags to see if the
second mount matches the earlier mount, but we left some flags out.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
|
|
If "max_credits" is overridden from its default by specifying
it on the smb3 mount then display it in /proc/mounts
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When using multidialect negotiate (default or specifying vers=3.0 which
allows any smb3 dialect), fix how we check for an existing server session.
Before this fix if you mounted a second time to the same server (e.g. a
different share on the same server) we would only reuse the existing smb
session if a single dialect were requested (e.g. specifying vers=2.1 or vers=3.0
or vers=3.1.1 on the mount command). If a default mount (e.g. not
specifying vers=) is done then would always create a new socket connection
and SMB3 (or SMB3.1.1) session each time we connect to a different share
on the same server rather than reusing the existing one.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB3.1.1 GCM performs much better than the older CCM default:
more than twice as fast in the write patch (copy to the Samba
server on localhost for example) and 80% faster on the read
patch (copy from the server).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
GCM is faster. Request it during negotiate protocol.
Followon patch will add callouts to GCM crypto
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag,
so no need to do that again from its callers. Drop it.
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
|
|
Use kmemdup rather than duplicating its implementation
This was reported by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel test robot found a regression of xfs/054 in the conversion of
bulkstat to use the new iwalk infrastructure -- if a caller set *lastip
= 128 and invoked FSBULKSTAT_SINGLE, the bstat info would be for inode
128, but *lastip would be increased by the kernel to 129.
FSBULKSTAT_SINGLE never incremented lastip before, so it's incorrect to
make such an update to the internal lastino value now.
Fixes: 2810bd6840e463 ("xfs: convert bulkstat to new iwalk infrastructure")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted. Memory leaks.
Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes: 950a578c6128 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The NFS protocol doesn't support deduplication, so turn it off again.
Fixes: ce96e888fe48e ("Fix nfs4.2 return -EINVAL when do dedupe operation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
On the NFS client there is no low-impact way to determine the nfs4
lease time or whether the lease is expired, so add these to mountstats
with times displayed in seconds.
If the lease is not expired, display lease_expired=0. Otherwise,
display lease_expired=seconds_since_expired, similar to 'age:' line
in mountstats.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Now that the VM promises never to recurse back into the filesystem
layer on writeback, remove all the GFP_NOFS references etc from
the generic writeback code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
|
|
|
|
With NFSv4.1, different network connections need to be explicitly
bound to a session. During session startup, this is not possible
so only a single connection must be used for session startup.
So add a task flag to disable the default round-robin choice of
connections (when nconnect > 1) and force the use of a single
connection.
Then use that flag on all requests for session management - for
consistence, include NFSv4.0 management (SETCLIENTID) and session
destruction
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the user specifies -onconnect=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the pNFS data server
as well. The connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the user specifies the -onconn=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the server. The
connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Allow the user to specify that the client should use multiple connections
to the server. For the moment, this functionality will be limited to
TCP and to NFSv4.x (x>0).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
In order to identify containers to the NFS client, we add a per-net
sysfs attribute that udev can fill with the appropriate identifier.
The identifier could be a unique hostname, but in most cases it
will probably be a persisted uuid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the client detects that close-to-open cache consistency has been
violated, and that the file or directory has been changed on the
server, then do a cache invalidation when we're done working with
the file.
The reason we don't do an immediate cache invalidation is that we
want to avoid performance problems due to false positives. Also,
note that we cannot guarantee cache consistency in this situation
even if we do invalidate the cache.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add a helper to clean up the struct nfs_net when it is being destroyed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes: ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When mapping the NFSv4 context to an open mode and access mode,
we need to treat the FMODE_EXEC flag differently. For the open
mode, FMODE_EXEC means we need read share access. For the access
mode checking, we need to verify that the user actually has
execute access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull vfs fixlet from Al Viro:
"Fix bogus default y in Kconfig (VALIDATE_FS_PARSER)
That thing should not be turned on by default, especially since it's
not quiet in case it finds no problems. Geert has sent the obvious fix
quite a few times, but it fell through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: VALIDATE_FS_PARSER should default to n
|
|
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
|
|
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and xfs.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and ext4.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The xattr scrubber functions use the temporary memory buffer either for
storing bitmaps or for testing if attribute value extraction works. The
bitmap code always zeroes what it needs and the value extraction sets
the buffer contents, so it's not necessary to waste CPU time zeroing on
allocation.
Note that while we never read the contents that the attr value
extraction function sets, we do need to call it to check the remote
attribute header and CRCs to check for corruption.
A flame graph analysis showed that we were spending 7% of a xfs_scrub
run (the whole program, not just the attr scrubber itself) allocating
and zeroing 64k segments needlessly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In examining a flame graph of time spent running xfs_scrub on various
filesystems, I noticed that we spent nearly 7% of the total runtime on
allocating a zeroed 65k buffer for every SCRUB_TYPE_XATTR invocation.
We do this even if none of the attribute values were anywhere near 64k
in size, even if there were no attribute blocks to check space on, and
even if it just turns out there are no attributes at all.
Therefore, rearrange the xattr buffer setup code to support reallocating
with a bigger buffer and redistribute the callers of that function so
that we only allocate memory just prior to needing it, and only allocate
as much as we need. If we can't get memory with the ILOCK held we'll
bail out with EDEADLOCK which will allocate the maximum memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Move the code that allocates memory buffers for the extended attribute
scrub code into a separate function so we can reduce memory allocations
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Replace the open-coded attribute buffer pointer calculations with helper
functions to make it more obvious what we're doing with our freeform
memory allocation w.r.t. either storing xattr values or computing btree
block free space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
When we're iterating all the attributes using the built-in xattr
iterator, we can use the seen_enough variable to pass error codes back
to the main scrub function instead of flattening them into 0/1. This
will be used in a more exciting fashion in upcoming patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Currently if the allocation of roots or tmp_ulist fails the error handling
does not free up the allocation of path causing a memory leak. Fix this and
other similar leaks by moving the call of btrfs_free_path from label out
to label out_free_ulist.
Kudos to David Sterba for spotting the issue in my original fix and suggesting
the correct way to fix the leak and Anand Jain for spotting a double free
issue.
Addresses-Coverity: ("Resource leak")
Fixes: 5911c8fe05c5 ("btrfs: fiemap: preallocate ulists for btrfs_check_shared")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane. It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.
Make sure it is not enabled by default in the final release of v5.1.
Fixes: 31d921c7fb969172 ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge more fixes from Andrew Morton:
"5 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
swap_readpage(): avoid blk_wake_io_task() if !synchronous
devres: allow const resource arguments
mm/vmscan.c: prevent useless kswapd loops
fs/userfaultfd.c: disable irqs for fault_pending and event locks
mm/page_alloc.c: fix regression with deferred struct page init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"A single dax fix that has been soaking awaiting other fixes under
discussion to join it. As it is getting late in the cycle lets proceed
with this fix and save follow-on changes for post-v5.3-rc1.
- Fix xarray entry association for mixed mappings"
* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix xarray entry association for mixed mappings
|
|
Pull do_move_mount() fix from Al Viro:
"Regression fix"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: move_mount: reject moving kernel internal mounts
|
|
When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.
This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.
But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.
Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.
Commit ae62c16e105a ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.
Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|