| Age | Commit message (Collapse) | Author |
|---|
|
ocfs2_page_mkwrite() could mistakenly return error code instead of
mkwrite status value. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Previously the client-core detected this condition by sheer luck!
Since we used strncpy, no NUL byte would be included on the name. The
client-core would call strlen, which would read past the end of its
buffer, but return a number large enough that the client-core would
return ENAMETOOLONG.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Don't return EINTR on interrupted writes if some data has already
been written.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Remove counter of pending io ends as it is unused.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When mapping blocks for direct IO, we allocate io_end structure before
mapping blocks and store pointer to it in the inode. This creates a
requirement that any AIO DIO using io_end must be protected by i_mutex.
This created problems in the past with dioread_nolock mode which was
corrupting io_end pointers. Also io_end is allocated unnecessarily in
case where we don't need to convert any extents (which is a common case
for example when overwriting file).
We fix the problem by allocating io_end only once we return unwritten
extent from block mapping function for AIO DIO (so we can save some
pointless io_end allocations) and we pass pointer to it in bh->b_private
which generic DIO code later passes to our end IO callback. That way we
remove any need for global pointer to io_end structure and thus fix the
races.
The downside of this change is that the checking for unwritten IO in
flight in ext4_extents_can_be_merged() is more racy since we now
increment i_unwritten / set EXT4_STATE_DIO_UNWRITTEN only after dropping
i_data_sem. However the check has been racy already before because
ext4_writepages() already increment i_unwritten after dropping
i_data_sem and reserved blocks save us from hitting ENOSPC in the worst
case.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
There is no need to handle starting of a transaction and deferal of DIO
completion in _ext4_get_block() function. We can move this out to get
block functions for direct IO that need it. That way we can add stricter
checks verifying things work as we expect.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better
describe what it does. Also split out get blocks functions for direct
IO. Later we move functionality from _ext4_get_blocks() there. There's no
functional change in this patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently we've used hashed aio_mutex to serialize unaligned AIO DIO.
However the code cleanups that happened after 2011 when the lock was
introduced made aio_mutex acquired at almost the same places where we
already have exclusion using i_mutex. So just use i_mutex for the
exclusion of unaligned AIO DIO.
The change moves waiting for pending unwritten extent conversion under
i_mutex. That makes special handling of O_APPEND writes unnecessary and
also avoids possible livelocking of unaligned AIO DIO with aligned one
(nothing was preventing contiguous stream of aligned AIO DIOs to let
unaligned AIO DIO wait forever).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
On 64-bit architectures we have two 4-byte holes in struct ext4_io_end.
Order entries better to avoid this and thus make the structure occupy
64 instead of 72 bytes for 64-bit architectures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
|
|
bp_release is set to 0 just before the breakpoint of the for loop before
the conditional check (in line 458). The other breakpoint is a goto that
skips the dead code.
Addresses-Coverity-Id: 102338
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Check the sizes of XFS on-disk structures when compiling the kernel.
Use this to catch inadvertent changes in structure size due to padding
and alignment issues, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
d_instantiate(new_dentry, old_inode) is absolutely wrong thing to
do - it will oops if new_dentry used to be positive, for starters.
What we need is d_invalidate() the target and be done with that.
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Failing to allocate an inode for child means that cache for *parent* is
incompletely populated. So it's parent directory inode ('dir') that
needs NCPI_DIR_CACHE flag removed, *not* the child inode ('inode', which
is what we'd failed to allocate in the first place).
Fucked-up-in: commit 5e993e25 ("ncpfs: get rid of d_validate() nonsense")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ecclayout->oobavail is just redundant with the mtd->oobavail field.
Moreover, it prevents static const definition of ecc layouts since the
NAND framework is calculating this value based on the ecclayout->oobfree
field.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Overlayfs bug fixes. All marked as -stable material"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: copy new uid/gid into overlayfs runtime inode
ovl: ignore lower entries when checking purity of non-directory entries
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: fix working on distributed fs as lower layer
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
|
|
|
|
|
We need to create a new ioend if the current writepage call isn't
logically contiguous with the range contained in the previous ioend.
Hopefully writepage gets called in order of increasing file offset.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use named array initializers for the string arrays used to dump log
items, rather than depending on the order being maintained correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Commit 88740da18[1] introduced a function to compute the maximum
height of the inode btree back in 1994. Back then, apparently, the
freespace and inode btrees shared the same geometry; however, it has
long since been the case that the inode and freespace btrees have
different record and key sizes. Therefore, we must use m_inobt_mnr if
we want a correct calculation/log reservation/etc.
(Yes, this bug has been around for 21 years and ten months.)
(Yes, I was in middle school when this bug was committed.)
[1] http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=88740da18ddd9d7ba3ebaa9502fefc6ef2fd19cd
Historical-research-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
If a crash occurs immediately after a filesystem grow operation, the
updated superblock geometry is found only in the log. After we
recover the log, the superblock is reread and re-initialised and so
has the new geometry in memory. If the new geometry has more AGs
than prior to the grow operation, then the new AGs will not have
in-memory xfs_perag structurea associated with them.
This will result in an oops when the first metadata buffer from a
new AG is looked up in the buffer cache, as the block lies within
the new geometry but then fails to find a perag structure on lookup.
This is easily fixed by simply re-initialising the perag structure
after re-reading the superblock at the conclusion of the first pahse
of log recovery.
This, however, does not fix the case of log recovery requiring
access to metadata in the newly grown space. Fortunately for us,
because the in-core superblock has not been updated, this will
result in detection of access beyond the end of the filesystem
and so recovery will fail at that point. If this proves to be
a problem, then we can address it separately to the current
reported issue.
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Tested-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
|
|
XFS uses CRC verification over a sub-range of the head of the log to
detect and handle torn writes. This torn log write detection currently
runs unconditionally at mount time, regardless of whether the log is
dirty or clean. This is problematic in cases where a filesystem might
end up being moved across different, incompatible (i.e., opposite
byte-endianness) architectures.
The problem lies in the fact that log data is not necessarily written in
an architecture independent format. For example, certain bits of data
are written in native endian format. Further, the size of certain log
data structures differs (i.e., struct xlog_rec_header) depending on the
word size of the cpu. This leads to false positive crc verification
errors and ultimately failed mounts when a cleanly unmounted filesystem
is mounted on a system with an incompatible architecture from data that
was written near the head of the log.
Update the log head/tail discovery code to run torn write detection only
when the log is not clean. This means something other than an unmount
record resides at the head of the log and log recovery is imminent. It
is a requirement to run log recovery on the same type of host that had
written the content of the dirty log and therefore CRC failures are
legitimate corruptions in that scenario.
Reported-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Once the record at the head of the log is identified and verified, the
in-core log state is updated based on the record. This includes
information such as the current head block and cycle, the start block of
the last record written to the log, the tail lsn, etc.
Once torn write detection is conditional, this logic will need to be
reused. Factor the code to update the in-core log data structures into a
new helper function. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Once the mount sequence has identified the head and tail blocks of the
physical log, the record at the head of the log is located and examined
for an unmount record to determine if the log is clean. This currently
occurs after torn write verification of the head region of the log.
This must ultimately be separated from torn write verification and may
need to be called again if the log head is walked back due to a torn
write (to determine whether the new head record is an unmount record).
Separate this logic into a new helper function. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The code that locates the log record at the head of the log is buried in
the log head verification function. This is fine when torn write
verification occurs unconditionally, but this behavior is problematic
for filesystems that might be moved across systems with different
architectures.
In preparation for separating examination of the log head for unmount
records from torn write detection, lift the record location logic out of
the log verification function and into the caller. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph fix from Sage Weil:
"This is a final commit we missed to align the protocol compatibility
with the feature bits.
It decodes a few extra fields in two different messages and reports
EIO when they are used (not yet supported)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
|
|
Replace the current NULL-terminated array of default groups with a linked
list. This gets rid of lots of nasty code to size and/or dynamically
allocate the array.
While we're at it also provide a conveniant helper to remove the default
groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget]
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
|
|
... and kill need_lookup thing
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
bugger off on negatives a bit earlier, simplify the tests
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
for the sake of namei.c fixes
|
|
Pull block fixes from Jens Axboe:
"Round 2 of this. I cut back to the bare necessities, the patch is
still larger than it usually would be at this time, due to the number
of NVMe fixes in there. This pull request contains:
- The 4 core fixes from Ming, that fix both problems with exceeding
the virtual boundary limit in case of merging, and the gap checking
for cloned bio's.
- NVMe fixes from Keith and Christoph:
- Regression on larger user commands, causing problems with
reading log pages (for instance). This touches both NVMe,
and the block core since that is now generally utilized also
for these types of commands.
- Hot removal fixes.
- User exploitable issue with passthrough IO commands, if !length
is given, causing us to fault on writing to the zero
page.
- Fix for a hang under error conditions
- And finally, the current series regression for umount with cgroup
writeback, where the final flush would happen async and hence open
up window after umount where the device wasn't consistent. fsck
right after umount would show this. From Tejun"
* 'for-linus2' of git://git.kernel.dk/linux-block:
block: support large requests in blk_rq_map_user_iov
block: fix blk_rq_get_max_sectors for driver private requests
nvme: fix max_segments integer truncation
nvme: set queue limits for the admin queue
writeback: flush inode cgroup wb switches instead of pinning super_block
NVMe: Fix 0-length integrity payload
NVMe: Don't allow unsupported flags
NVMe: Move error handling to failed reset handler
NVMe: Simplify device reset failure
NVMe: Fix namespace removal deadlock
NVMe: Use IDA for namespace disk naming
NVMe: Don't unmap controller registers on reset
block: merge: get the 1st and last bvec via helpers
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
block: bio: introduce helpers to get the 1st and last bvec
|
|
Pull jffs2 fixes from David Woodhouse:
"This contains two important JFFS2 fixes marked for stable:
- a lock ordering problem between the page lock and the internal
f->sem mutex, which was causing occasional deadlocks in garbage
collection
- a scan failure causing moved directories to sometimes end up
appearing to have hard links.
There are also a couple of trivial MAINTAINERS file updates"
* tag 'for-linus-20160304' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
MAINTAINERS: update Han's email
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"Filipe nailed down a problem where tree log replay would do some work
that orphan code wasn't expecting to be done yet, leading to BUG_ON"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix loading of orphan roots leading to BUG_ON
|
|
Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This adds a flag that tells the file system that this is a high priority
request for which it's worth to poll the hardware. The flag is purely
advisory and can be ignored if not supported.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
New syscalls that take an flag argument. No flags are added yet in this
patch.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This way we can set kiocb flags also from the sync read/write path for
the read_iter/write_iter operations. For now there is no way to pass
flags to plain read/write operations as there is no real need for that,
and all flags passed are explicitly rejected for these files.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
