| Age | Commit message (Collapse) | Author |
|---|
|
To get it out from under the cil spinlock.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that we have the CIL percpu structures in place, implement the
space used counter as a per-cpu counter.
We have to be really careful now about ensuring that the checks and
updates run without arbitrary delays, which means they need to run
with pre-emption disabled. We do this by careful placement of
the get_cpu_ptr/put_cpu_ptr calls to access the per-cpu structures
for that CPU.
We need to be able to reliably detect that the CIL has reached
the hard limit threshold so we can take extra reservations for the
iclog headers when the space used overruns the original reservation.
hence we factor out xlog_cil_over_hard_limit() from
xlog_cil_push_background().
The global CIL space used is an atomic variable that is backed by
per-cpu aggregation to minimise the number of atomic updates we do
to the global state in the fast path. While we are under the soft
limit, we aggregate only when the per-cpu aggregation is over the
proportion of the soft limit assigned to that CPU. This means that
all CPUs can use all but one byte of their aggregation threshold
and we will not go over the soft limit.
Hence once we detect that we've gone over both a per-cpu aggregation
threshold and the soft limit, we know that we have only
exceeded the soft limit by one per-cpu aggregation threshold. Even
if all CPUs hit this at the same time, we can't be over the hard
limit, so we can run an aggregation back into the atomic counter
at this point and still be under the hard limit.
At this point, we will be over the soft limit and hence we'll
aggregate into the global atomic used space directly rather than the
per-cpu counters, hence providing accurate detection of hard limit
excursion for accounting and reservation purposes.
Hence we get the best of both worlds - lockless, scalable per-cpu
fast path plus accurate, atomic detection of hard limit excursion.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
zonefs_read_super() acquires a page with alloc_page(GFP_KERNEL). That
page cannot come from ZONE_HIGHMEM, thus there's no need to map it with
kmap().
Therefore, use a plain page_address() on that page.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
... and lose messing with it in __follow_mount_rcu()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Note that validation of ->d_seq after ->d_inode fetch is gone, along
with fetching of ->d_inode itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
step_into() will fetch it, TYVM.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
make handle_mounts() always fetch it. This is just the first step -
the callers of step_into() will stop trying to calculate the sucker,
etc.
The passed value should be equal to dentry->d_inode in all cases;
in RCU mode - fetched after we'd sampled ->d_seq. Might as well
fetch it here. We do need to validate ->d_seq, which duplicates
the check currently done in lookup_fast(); that duplication will
go away shortly.
After that change handle_mounts() always ignores the initial value of
*inode and always sets it on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
New field: nd->next_seq. Set to 0 outside of RCU mode, holds the sampled
value for the next dentry to be considered. Used instead of an arseload
of local variables, arguments, etc.
step_into() has lost seq argument; nd->next_seq is used, so dentry passed
to it must be the one ->next_seq is about.
There are two requirements for RCU pathwalk:
1) it should not give a hard failure (other than -ECHILD) unless
non-RCU pathwalk might fail that way given suitable timings.
2) it should not succeed unless non-RCU pathwalk might succeed
with the same end location given suitable timings.
The use of seq numbers is the way we achieve that. Invariant we want
to maintain is:
if RCU pathwalk can reach the state with given nd->path, nd->inode
and nd->seq after having traversed some part of pathname, it must be possible
for non-RCU pathwalk to reach the same nd->path and nd->inode after having
traversed the same part of pathname, and observe the nd->path.dentry->d_seq
equal to what RCU pathwalk has in nd->seq
For transition from parent to child, we sample child's ->d_seq
and verify that parent's ->d_seq remains unchanged. Anything that
disrupts parent-child relationship would've bumped ->d_seq on both.
For transitions from child to parent we sample parent's ->d_seq
and verify that child's ->d_seq has not changed. Same reasoning as
for the previous case applies.
For transition from mountpoint to root of mounted we sample
the ->d_seq of root and verify that nobody has touched mount_lock since
the beginning of pathwalk. That guarantees that mount we'd found had
been there all along, with these mountpoint and root of the mounted.
It would be possible for a non-RCU pathwalk to reach the previous state,
find the same mount and observe its root at the moment we'd sampled
->d_seq of that
For transitions from root of mounted to mountpoint we sample
->d_seq of mountpoint and verify that mount_lock had not been touched
since the beginning of pathwalk. The same reasoning as in the
previous case applies.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
try_to_unlazy()/try_to_unlazy_next() drop LOOKUP_RCU in the
very beginning and do rcu_read_unlock() only at the very end.
However, nothing done in between even looks at the flag in
question; might as well clear it at the same time we unlock.
Note that try_to_unlazy_next() used to call legitimize_mnt(),
which might drop/regain rcu_read_lock() in some cases. This
is no longer true, so we really have rcu_read_lock() held
all along until the end.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is no need to initialize with NULL as it'll be rewritten later.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Pass a block_device instead of a request_queue as that is what most
callers have at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit b8f35fa1188b84035c59d4842826c4e93a1b1c9f.
This is causing regression due to same kernfs_node getting
added multiple times in kernfs_notify_list so revert it until
safe way of using llist in this context is found.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Michael Walle <michael@walle.cc>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220705201026.2487665-1-imran.f.khan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The tricky case (__legitimize_mnt() failing after having grabbed
a reference) can be trivially dealt with by leaving nd->path.mnt
non-NULL, for terminate_walk() to drop it.
legitimize_mnt() becomes static after that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of returning NULL when we are in root, just make it return
the current position (and set *seqp and *inodep accordingly).
That collapses the calls of step_into() in handle_dots()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
read_seqcount_retry() et.al. are inlined and there's enough annotations
for compiler to figure out that those are unlikely to return non-zero.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Validate mount_lock seqcount as soon as we cross into mount in RCU
mode. Sure, ->mnt_root is pinned and will remain so until we
do rcu_read_unlock() anyway, and we will eventually fail to unlazy if
the mount_lock had been touched, but we might run into a hard error
(e.g. -ENOENT) before trying to unlazy. And it's possible to end
up with RCU pathwalk racing with rename() and umount() in a way
that would fail with -ENOENT while non-RCU pathwalk would've
succeeded with any timings.
Once upon a time we hadn't needed that, but analysis had been subtle,
brittle and went out of window as soon as RENAME_EXCHANGE had been
added.
It's narrow, hard to hit and won't get you anything other than
stray -ENOENT that could be arranged in much easier way with the
same priveleges, but it's a bug all the same.
Cc: stable@kernel.org
X-sky-is-falling: unlikely
Fixes: da1ce0670c14 "vfs: add cross-rename"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If an NFS file is opened for writing and closed, fscache_invalidate() will
be asked to invalidate the file - however, if the cookie is in the
LOOKING_UP state (or the CREATING state), then request to invalidate
doesn't get recorded for fscache_cookie_state_machine() to do something
with.
Fix this by making __fscache_invalidate() set a flag if it sees the cookie
is in the LOOKING_UP state to indicate that we need to go to invalidation.
Note that this requires a count on the n_accesses counter for the state
machine, which that will release when it's done.
fscache_cookie_state_machine() then shifts to the INVALIDATING state if it
sees the flag.
Without this, an nfs file can get corrupted if it gets modified locally and
then read locally as the cache contents may not get updated.
Fixes: d24af13e2e23 ("fscache: Implement cookie invalidation")
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Max Kellermann <mk@cm4all.com>
Link: https://lore.kernel.org/r/YlWWbpW5Foynjllo@rabbit.intern.cm-ag [1]
|
|
When an anonymous fd is released, only flush the requests
associated with it, rather than all of requests in xarray.
Fixes: 9032b6e8589f ("cachefiles: implement on-demand read")
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://listman.redhat.com/archives/linux-cachefs/2022-June/006937.html
|
|
FSCACHE_COOKIE_STATE_DROPPED will be read more than once, so let's add a
helper to avoid code duplication.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://listman.redhat.com/archives/linux-cachefs/2022-May/006919.html
|
|
After waiting for the volume to complete the acquisition with timeout,
the if condition under which potential volume collision occurs should be
acquire the volume is still pending rather than not pending so that we
will continue to wait until the pending flag is cleared. Also, use the
existing test pending wrapper directly instead of test_bit().
Fixes: 62ab63352350 ("fscache: Implement volume registration")
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://listman.redhat.com/archives/linux-cachefs/2022-May/006918.html
|
|
The assignment to variable r is duplicated, the second assignment
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This error path needs to call up_write(&ni->file.run_lock) and do some
other clean up before returning.
Fixes: aa30eccb24e5 ("fs/ntfs3: Fallocate (FALLOC_FL_INSERT_RANGE) implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
None of callers check the return value of ntfs_update_mftmirr(), so make
it return void to make code simpler.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL.
Code should check this ptr before dereferencing. Syzbot hit this issue
via passing wrong mount param as can be seen from log below
Fail log:
ntfs3: Unknown parameter 'iochvrset'
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0
...
Call Trace:
<TASK>
put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463
ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363
put_fs_context+0x119/0x7a0 fs/fs_context.c:469
do_new_mount+0x2b4/0xad0 fs/namespace.c:3044
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-and-tested-by: syzbot+c95173762127ad76a824@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Pss is the sum of the sizes of clean and dirty private pages, and the
proportional sizes of clean and dirty shared pages:
Private = Private_Dirty + Private_Clean
Shared_Proportional = Shared_Dirty_Proportional + Shared_Clean_Proportional
Pss = Private + Shared_Proportional
The Shared*Proportional fields are not present in smaps, so it is not
always possible to determine how much of the Pss is from dirty pages and
how much is from clean pages. This information can be useful for
measuring memory usage for the purpose of optimisation, since clean pages
can usually be discarded by the kernel immediately while dirty pages
cannot.
The smaps routines in the kernel already have access to this data, so add
a Pss_Dirty to show it to userspace. Pss_Clean is not added since it can
be calculated from Pss and Pss_Dirty.
Link: https://lkml.kernel.org/r/20220620081251.2928103-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:
$ umask
0022
$ touch file && ln -s file symlink; ls -l file symlink
-rw-r--r--. 1 root root 0 Jun 23 16:29 file
lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file
This fixes the bug by inserting a missing check that excludes
symlinks.
Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull xfs fixes from Darrick Wong:
"This fixes some stalling problems and corrects the last of the
problems (I hope) observed during testing of the new atomic xattr
update feature.
- Fix statfs blocking on background inode gc workers
- Fix some broken inode lock assertion code
- Fix xattr leaf buffer leaks when cancelling a deferred xattr update
operation
- Clean up xattr recovery to make it easier to understand.
- Fix xattr leaf block verifiers tripping over empty blocks.
- Remove complicated and error prone xattr leaf block bholding mess.
- Fix a bug where an rt extent crossing EOF was treated as "posteof"
blocks and cleaned unnecessarily.
- Fix a UAF when log shutdown races with unmount"
* tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent a UAF when log IO errors race with unmount
xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
xfs: don't hold xattr leaf buffers across transaction rolls
xfs: empty xattr leaf header blocks are not corruption
xfs: clean up the end of xfs_attri_item_recover
xfs: always free xattri_leaf_bp when cancelling a deferred op
xfs: use invalidate_lock to check the state of mmap_lock
xfs: factor out the common lock flags assert
xfs: introduce xfs_inodegc_push()
xfs: bound maximum wait time for inodegc work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Fix NFSD crash during NFSv4.2 READ_PLUS operation
- Fix incorrect status code returned by COMMIT operation"
* tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix READ_PLUS crasher
NFSD: restore EINVAL error translation in nfsd_commit()
|
|
Remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/9p/fid.c:35: warning: Function parameter or member 'pfid' not described in 'v9fs_fid_add'
fs/9p/fid.c:35: warning: Excess function parameter 'fid' description in 'v9fs_fid_add'
fs/9p/fid.c:80: warning: Function parameter or member 'pfid' not described in 'v9fs_open_fid_add'
fs/9p/fid.c:80: warning: Excess function parameter 'fid' description in 'v9fs_open_fid_add'
Link: https://lkml.kernel.org/r/20220615012039.43479-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[Dominique: further adjust comment]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Simplify p9_fid_put cleanup path in many 9p functions since the function
is noop on null or error fids.
Also make the *_add_fid() helpers "steal" the fid by nulling its
pointer, so put after them will be noop.
This should lead to no change of behaviour
Link: https://lkml.kernel.org/r/20220612085330.1451496-7-asmadeus@codewreck.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
I was recently reminded that it is not clear that p9_client_clunk()
was actually just decrementing refcount and clunking only when that
reaches zero: make it clear through a set of helpers.
This will also allow instrumenting refcounting better for debugging
next patch
Link: https://lkml.kernel.org/r/20220612085330.1451496-5-asmadeus@codewreck.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Fix s/patch/path/ typo and make it clear that we're talking about
multiple path components.
Link: https://lkml.kernel.org/r/20220527000003.355812-6-tyhicks@linux.microsoft.com
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Remove the ofid variable that's local to the conditional block in favor
of the old_fid variable that's local to the entire function.
Link: https://lkml.kernel.org/r/20220527000003.355812-5-tyhicks@linux.microsoft.com
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Cloning during a path component walk is only needed when the old fid
used for the walk operation is the root fid. Make that clear by
comparing the two fids rather than using an additional variable.
Link: https://lkml.kernel.org/r/20220527000003.355812-4-tyhicks@linux.microsoft.com
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Improve readability by using a new variable when dealing with the root
fid. The root fid requires special handling in comparison to other fids
used during fid lookup.
Link: https://lkml.kernel.org/r/20220527000003.355812-3-tyhicks@linux.microsoft.com
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Change 'wont't' to 'won't'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220629072932.27506-1-jiaming@nfschina.com
|
|
Pull NFS client fixes from Anna Schumaker:
- Allocate a fattr for _nfs4_discover_trunking()
- Fix module reference count leak in nfs4_run_state_manager()
* tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add an fattr allocation to _nfs4_discover_trunking()
NFS: restore module put when manager exits.
|
|
Pull ceph fix from Ilya Dryomov:
"A ceph filesystem fix, marked for stable.
There appears to be a deeper issue on the MDS side, but for now we are
going with this one-liner to avoid busy looping and potential soft
lockups"
* tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client:
ceph: wait on async create before checking caps for syncfs
|
|
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
|
|
The CIL push lock is highly contended on larger machines, becoming a
hard bottleneck that about 700,000 transaction commits/s on >16p
machines. To address this, start moving the CIL tracking
infrastructure to utilise per-CPU structures.
We need to track the space used, the amount of log reservation space
reserved to write the CIL, the log items in the CIL and the busy
extents that need to be completed by the CIL commit. This requires
a couple of per-cpu counters, an unordered per-cpu list and a
globally ordered per-cpu list.
Create a per-cpu structure to hold these and all the management
interfaces needed, as well as the hooks to handle hotplug CPUs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
For every iclog that a CIL push will use up, we need to ensure we
have space reserved for the iclog header in each iclog. It is
extremely difficult to do this accurately with a per-cpu counter
without expensive summing of the counter in every commit. However,
we know what the maximum CIL size is going to be because of the
hard space limit we have, and hence we know exactly how many iclogs
we are going to need to write out the CIL.
We are constrained by the requirement that small transactions only
have reservation space for a single iclog header built into them.
At commit time we don't know how much of the current transaction
reservation is made up of iclog header reservations as calculated by
xfs_log_calc_unit_res() when the ticket was reserved. As larger
reservations have multiple header spaces reserved, we can steal
more than one iclog header reservation at a time, but we only steal
the exact number needed for the given log vector size delta.
As a result, we don't know exactly when we are going to steal iclog
header reservations, nor do we know exactly how many we are going to
need for a given CIL.
To make things simple, start by calculating the worst case number of
iclog headers a full CIL push will require. Record this into an
atomic variable in the CIL. Then add a byte counter to the log
ticket that records exactly how much iclog header space has been
reserved in this ticket by xfs_log_calc_unit_res(). This tells us
exactly how much space we can steal from the ticket at transaction
commit time.
Now, at transaction commit time, we can check if the CIL has a full
iclog header reservation and, if not, steal the entire reservation
the current ticket holds for iclog headers. This minimises the
number of times we need to do atomic operations in the fast path,
but still guarantees we get all the reservations we need.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The xc_cil_lock is the most highly contended lock in XFS now. To
start the process of getting rid of it, lift the initial reservation
of the CIL log space out from under the xc_cil_lock.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
In the next patches we are going to make the CIL list itself
per-cpu, and so we cannot use list_empty() to check is the list is
empty. Replace the list_empty() checks with a flag in the CIL to
indicate we have committed at least one transaction to the CIL and
hence the CIL is not empty.
We need this flag to be an atomic so that we can clear it without
holding any locks in the commit fast path, but we also need to be
careful to avoid atomic operations in the fast path. Hence we use
the fact that test_bit() is not an atomic op to first check if the
flag is set and then run the atomic test_and_clear_bit() operation
to clear it and steal the initial unit reservation for the CIL
context checkpoint.
When we are switching to a new context in a push, we place the
setting of the XLOG_CIL_EMPTY flag under the xc_push_lock. THis
allows all the other places that need to check whether the CIL is
empty to use test_bit() and still be serialised correctly with the
CIL context swaps that set the bit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
KASAN reported the following use after free bug when running
generic/475:
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
Buffer I/O error on dev dm-0, logical block 20639616, async page read
Buffer I/O error on dev dm-0, logical block 20639617, async page read
XFS (dm-0): log I/O error -5
XFS (dm-0): Filesystem has been shut down due to log error (0x2).
XFS (dm-0): Unmounting Filesystem
XFS (dm-0): Please unmount the filesystem and rectify the problem(s).
==================================================================
BUG: KASAN: use-after-free in do_raw_spin_lock+0x246/0x270
Read of size 4 at addr ffff888109dd84c4 by task 3:1H/136
CPU: 3 PID: 136 Comm: 3:1H Not tainted 5.19.0-rc4-xfsx #rc4 8e53ab5ad0fddeb31cee5e7063ff9c361915a9c4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: xfs-log/dm-0 xlog_ioend_work [xfs]
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x2b8/0x661
? do_raw_spin_lock+0x246/0x270
kasan_report+0xab/0x120
? do_raw_spin_lock+0x246/0x270
do_raw_spin_lock+0x246/0x270
? rwlock_bug.part.0+0x90/0x90
xlog_force_shutdown+0xf6/0x370 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
xlog_ioend_work+0x100/0x190 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
process_one_work+0x672/0x1040
worker_thread+0x59b/0xec0
? __kthread_parkme+0xc6/0x1f0
? process_one_work+0x1040/0x1040
? process_one_work+0x1040/0x1040
kthread+0x29e/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 154099:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
kmem_alloc+0x8d/0x2e0 [xfs]
xlog_cil_init+0x1f/0x540 [xfs]
xlog_alloc_log+0xd1e/0x1260 [xfs]
xfs_log_mount+0xba/0x640 [xfs]
xfs_mountfs+0xf2b/0x1d00 [xfs]
xfs_fs_fill_super+0x10af/0x1910 [xfs]
get_tree_bdev+0x383/0x670
vfs_get_tree+0x7d/0x240
path_mount+0xdb7/0x1890
__x64_sys_mount+0x1fa/0x270
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 154151:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x110/0x190
slab_free_freelist_hook+0xab/0x180
kfree+0xbc/0x310
xlog_dealloc_log+0x1b/0x2b0 [xfs]
xfs_unmountfs+0x119/0x200 [xfs]
xfs_fs_put_super+0x6e/0x2e0 [xfs]
generic_shutdown_super+0x12b/0x3a0
kill_block_super+0x95/0xd0
deactivate_locked_super+0x80/0x130
cleanup_mnt+0x329/0x4d0
task_work_run+0xc5/0x160
exit_to_user_mode_prepare+0xd4/0xe0
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This appears to be a race between the unmount process, which frees the
CIL and waits for in-flight iclog IO; and the iclog IO completion. When
generic/475 runs, it starts fsstress in the background, waits a few
seconds, and substitutes a dm-error device to simulate a disk falling
out of a machine. If the fsstress encounters EIO on a pure data write,
it will exit but the filesystem will still be online.
The next thing the test does is unmount the filesystem, which tries to
clean the log, free the CIL, and wait for iclog IO completion. If an
iclog was being written when the dm-error switch occurred, it can race
with log unmounting as follows:
Thread 1 Thread 2
xfs_log_unmount
xfs_log_clean
xfs_log_quiesce
xlog_ioend_work
<observe error>
xlog_force_shutdown
test_and_set_bit(XLOG_IOERROR)
xfs_log_force
<log is shut down, nop>
xfs_log_umount_write
<log is shut down, nop>
xlog_dealloc_log
xlog_cil_destroy
<wait for iclogs>
spin_lock(&log->l_cilp->xc_push_lock)
<KABOOM>
Therefore, free the CIL after waiting for the iclogs to complete. I
/think/ this race has existed for quite a few years now, though I don't
remember the ~2014 era logging code well enough to know if it was a real
threat then or if the actual race was exposed only more recently.
Fixes: ac983517ec59 ("xfs: don't sleep in xlog_cil_force_lsn on shutdown")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Link: https://lore.kernel.org/r/20220629144210.2983229-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Create helper fanotify_may_update_existing_mark() for checking for
conflicts between existing mark flags and fanotify_mark() flags.
Use variable mark_cmd to make the checks for mark command bits
cleaner.
Link: https://lore.kernel.org/r/20220629144210.2983229-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Setting flags FAN_ONDIR FAN_EVENT_ON_CHILD in ignore mask has no effect.
The FAN_EVENT_ON_CHILD flag in mask implicitly applies to ignore mask and
ignore mask is always implicitly applied to events on directories.
Define a mark flag that replaces this legacy behavior with logic of
applying the ignore mask according to event flags in ignore mask.
Implement the new logic to prepare for supporting an ignore mask that
ignores events on children and ignore mask that does not ignore events
on directories.
To emphasize the change in terminology, also rename ignored_mask mark
member to ignore_mask and use accessors to get only the effective
ignored events or the ignored events and flags.
This change in terminology finally aligns with the "ignore mask"
language in man pages and in most of the comments.
Link: https://lore.kernel.org/r/20220629144210.2983229-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Correct spelling in comment.
Signed-off-by: Oliver Ford <ojford@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518145959.41-1-ojford@gmail.com
|
|
When lockdep is enabled, lockdep_assert_held_write would
cause potential NULL pointer dereference.
Fix the following smatch warnings:
fs/kernfs/dir.c:1353 __kernfs_remove() warn: variable dereferenced before check 'kn' (see line 1346)
Fixes: 393c3714081a ("kernfs: switch global kernfs_rwsem lock to per-fs lock")
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Link: https://lore.kernel.org/r/20220630082512.3482581-1-zys.zljxml@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
