| Age | Commit message (Collapse) | Author |
|---|
|
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.
Move the check for ls_layouts before setting ls_recalled.
Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.
What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.
Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.
The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.
This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This file is no longer built at all.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.
Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is wrapper is pointless, and just obscures what's going on.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We really don't need an accessor function here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We're not doing any blocking operations for OP_OFFLOAD_STATUS, so taking
and putting a reference is a waste of effort. Take the client lock,
search for the copy and fetch the wr_bytes_written field and return.
Also, make find_async_copy a static function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that I've added a file under /proc/net/rpc that is managed by
the SunRPC's Kerberos mechanism, replace NFSD's
supported_krb5_enctypes file with a symlink to the new SunRPC proc
file, which contains exactly the same content.
Remarkably, commit b0b0c0a26e84 ("nfsd: add proc file listing
kernel's gss_krb5 enctypes") added the nfsd_supported_krb5_enctypes
file in 2011, but this file has never been documented in nfsd(7).
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
- Improves counting accuracy
- Reduces cross-CPU memory traffic
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There's no need to start the reply cache before nfsd is up and running,
and doing so means that we register a shrinker for every net namespace
instead of just the ones where nfsd is running.
Move it to the per-net nfsd startup instead.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, svcauth_gss_accept() pre-reserves response buffer space
for the RPC payload length and GSS sequence number before returning
to the dispatcher, which then adds the header's accept_stat field.
The problem is the accept_stat field is supposed to go before the
length and seq_num fields. So svcauth_gss_release() has to relocate
the accept_stat value (see svcauth_gss_prepare_to_wrap()).
To enable these fields to be added to the response buffer in the
correct (final) order, the pointer to the accept_stat has to be made
available to svcauth_gss_accept() so that it can set it before
reserving space for the length and seq_num fields.
As a first step, move the pointer to the location of the accept_stat
field into struct svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The WARN_ON_ONCE check is not terribly useful. It also seems possible
for nfs4_find_file to race with the destruction of an fi_deleg_file
while trying to take a reference to it.
Now that it's safe to pass nfs_get_file a NULL pointer, remove the WARN
and NULL pointer check. Take the fi_lock when fetching fi_deleg_file.
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
...and remove some now-useless NULL pointer checks in its callers.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now with NFSD being able to cross into auto mounts,
the check can be removed.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This function is only used by NFSD to cross mount points.
If a mount point is of type auto mount, follow_down() will
not uncover it. Add LOOKUP_AUTOMOUNT to the lookup flags
to have ->d_automount() called when NFSD walks down the
mount tree.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd_mountpoint() tests for mount points using d_mountpoint(),
this works only when a mount point is already uncovered.
In our case the mount point is of type auto mount and can be coverted.
i.e. ->d_automount() was not called.
Using d_managed() nfsd_mountpoint() can test whether a mount point is
either already uncovered or can be uncovered later.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Stephen Rothwell reported htmldocs warning when merging driver-core tree
for linux-next:
Documentation/filesystems/api-summary:146: fs/debugfs/inode.c:804: WARNING: Inline literal start-string without end-string.
The warning is due to inline constant formatting (``%CONST``) doesn't play
nice with complex-name constants like ERR_PTR(-ERROR).
Drop the formatting for that constant above to be consistent with similar
error constants and also to fix the above warning.
Link: https://lore.kernel.org/lkml/20230220163133.481e43d8@canb.auug.org.au/
Fixes: d3002468cb5d5d ("debugfs: update comment of debugfs_rename()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230220124721.11657-1-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
argv needs to be free when setup_async_work fails or when the current
process is woken up.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5244 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6555
schedule+0xcb/0x190 kernel/sched/core.c:6631
__wait_on_freeing_inode fs/inode.c:2196 [inline]
find_inode_fast+0x35a/0x4c0 fs/inode.c:950
iget_locked+0xb1/0x830 fs/inode.c:1273
__ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
evict+0x2a4/0x620 fs/inode.c:664
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
</TASK>
==================================================================
The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode.
Link: https://syzkaller.appspot.com/bug?extid=77d6fcc37bbb92f26048
Reported-by: syzbot+77d6fcc37bbb92f26048@syzkaller.appspotmail.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110133436.996350-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Following process will make data lost and could lead to a filesystem
corrupted problem:
1. jh(bh) is inserted into T1->t_checkpoint_list, bh is dirty, and
jh->b_transaction = NULL
2. T1 is added into journal->j_checkpoint_transactions.
3. Get bh prepare to write while doing checkpoing:
PA PB
do_get_write_access jbd2_log_do_checkpoint
spin_lock(&jh->b_state_lock)
if (buffer_dirty(bh))
clear_buffer_dirty(bh) // clear buffer dirty
set_buffer_jbddirty(bh)
transaction =
journal->j_checkpoint_transactions
jh = transaction->t_checkpoint_list
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
// bh won't be flushed
jbd2_cleanup_journal_tail
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved)
4. Aborting journal/Power-cut before writing latest bh on journal area.
In this way we get a corrupted filesystem with bh's data lost.
Fix it by moving the clearing of buffer_dirty bit just before the call
to __jbd2_journal_file_buffer(), both bit clearing and jh->b_transaction
assignment are under journal->j_list_lock locked, so that
jbd2_log_do_checkpoint() will wait until jh's new transaction fininshed
even bh is currently not dirty. And journal_shrink_one_cp_list() won't
remove jh from checkpoint list if the buffer head is reused in
do_get_write_access().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216898
Cc: <stable@kernel.org>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110015327.1181863-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When mounting a crafted ext4 image, s_journal_inum may change after journal
replay, which is obviously unreasonable because we have successfully loaded
and replayed the journal through the old s_journal_inum. And the new
s_journal_inum bypasses some of the checks in ext4_get_journal(), which
may trigger a null pointer dereference problem. So if s_journal_inum
changes after the journal replay, we ignore the change, and rewrite the
current journal_inum to the superblock.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Reported-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In ext4_fill_super(), EXT4_ORPHAN_FS flag is cleared after
ext4_orphan_cleanup() is executed. Therefore, when __ext4_iget() is
called to get an inode whose i_nlink is 0 when the flag exists, no error
is returned. If the inode is a special inode, a null pointer dereference
may occur. If the value of i_nlink is 0 for any inodes (except boot loader
inodes) got by using the EXT4_IGET_SPECIAL flag, the current file system
is corrupted. Therefore, make the ext4_iget() function return an error if
it gets such an abnormal special inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199179
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216539
Reported-by: Luís Henriques <lhenriques@suse.de>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
ext4_feat_ktype was setting the "release" handler to "kfree", which
doesn't have a matching function prototype. Add a simple wrapper
with the correct prototype.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Note that this code is only reached when ext4 is a loadable module and
it is being unloaded:
CFI failure at kobject_put+0xbb/0x1b0 (target: kfree+0x0/0x180; expected type: 0x7c4aa698)
...
RIP: 0010:kobject_put+0xbb/0x1b0
...
Call Trace:
<TASK>
ext4_exit_sysfs+0x14/0x60 [ext4]
cleanup_module+0x67/0xedb [ext4]
Fixes: b99fee58a20a ("ext4: create ext4_feat kobject dynamically")
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230103234616.never.915-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230104210908.gonna.388-kees@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Variables are assigned first and then used. Initialization is not required.
Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Link: https://lore.kernel.org/r/20230104055229.3663-1-xupengfei@nfschina.com
|
|
If ENOMEM fails when the extent is splitting, we need to restore the length
of the split extent.
In the ext4_split_extent_at function, only in ext4_ext_create_new_leaf will
it alloc memory and change the shape of the extent tree,even if an ENOMEM
is returned at this time, the extent tree is still self-consistent, Just
restore the split extent lens in the function ext4_split_extent_at.
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
1)ext4_ext_split
ext4_find_extent
2)ext4_ext_grow_indepth
ext4_find_extent
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103022812.130603-1-zhanchengbin1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-3-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Copy ea data from inode entry when expanding ea block if possible.
Then remove the ea entry if expansion success. Thus memcpy to a
temporary buffer may be avoided.
If the expansion fails, we do not need to recovery the removed ea
entry neither in this way.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-2-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead execution
of the code in question.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221230141858.3828-1-007047221b@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Five are cc:stable: four for MM, one for nilfs2.
Also a MAINTAINERS update"
* tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix underflow in second superblock position calculations
hugetlb: check for undefined shift on 32 bit architectures
mm/migrate: fix wrongly apply write bit after mkdirty on sparc64
MAINTAINERS: update FPU EMULATOR web page
mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount
mm/filemap: fix page end in filemap_get_read_batch
|
|
Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second
superblock, underflows when the argument device size is less than 4096
bytes. Therefore, when using this macro, it is necessary to check in
advance that the device size is not less than a lower limit, or at least
that underflow does not occur.
The current nilfs2 implementation lacks this check, causing out-of-bound
block access when mounting devices smaller than 4096 bytes:
I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0
phys_seg 1 prio class 2
NILFS (loop0): unable to read secondary superblock (blocksize = 1024)
In addition, when trying to resize the filesystem to a size below 4096
bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number
of segments to nilfs_sufile_resize(), corrupting parameters such as the
number of segments in superblocks. This causes excessive loop iterations
in nilfs_sufile_resize() during a subsequent resize ioctl, causing
semaphore ns_segctor_sem to block for a long time and hang the writer
thread:
INFO: task segctord:5067 blocked for more than 143 seconds.
Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:segctord state:D stack:23456 pid:5067 ppid:2
flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x1409/0x43f0 kernel/sched/core.c:6606
schedule+0xc3/0x190 kernel/sched/core.c:6682
rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190
nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline]
nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570
kthread+0x270/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
...
Call Trace:
<TASK>
folio_mark_accessed+0x51c/0xf00 mm/swap.c:515
__nilfs_get_page_block fs/nilfs2/page.c:42 [inline]
nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61
nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121
nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176
nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251
nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline]
nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline]
nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777
nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422
nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline]
nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301
...
This fixes these issues by inserting appropriate minimum device size
checks or anti-underflow checks, depending on where the macro is used.
Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com
Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 7fd461c47c6cfab4ca4d003790ec276209e52978.
Unfortunately, it has come to our attention that there is still a bug
somewhere in the READ_PLUS code that can result in nfsroot systems on
ARM to crash during boot.
Let's do the right thing and revert this change so we don't break
people's nfsroot setups.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return -ENOMEM if alloc_workqueue() fails. Don't return success.
Fixes: d8a650adf429 ("erofs: add per-cpu threads for decompression as an option")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/Y+4d0FRsUq8jPoOu@kili
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL")
changed return value of debugfs_rename() in error cases from %NULL to
%ERR_PTR(-ERROR), the comment of debugfs_rename should also be updated
so as not to mislead readers.
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Link: https://lore.kernel.org/r/20230208035634.58095-1-zhengqi.arch@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a teardown bug in the new nfs4_file hashtable
* tag 'nfsd-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't destroy global nfs4_file table in per-net shutdown
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The only user in the zoned remap code is gone now, so remove the argument.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_record_physical_zoned relies on a bio->bi_bdev samples in the
bio_end_io handler to find the reverse map for remapping the zone append
write, but stacked block device drivers can and usually do change bi_bdev
when sending on the bio to a lower device. This can happen e.g. with the
nvme-multipath driver when a NVMe SSD sets the shared namespace bit.
But there is no real need for the bdev in btrfs_record_physical_zoned,
as it is only passed to btrfs_rmap_block, which uses it to pick the
mapping to report if there are multiple reverse mappings. As zone
writes can only do simple non-mirror writes right now, and anything
more complex will use the stripe tree there is no chance of the multiple
mappings case actually happening.
Instead open code the subset of btrfs_rmap_block in
btrfs_record_physical_zoned, which also removes a memory allocation and
remove the bdev field in the ordered extent.
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using Zone Append only makes sense for writes to the device, so check
that in btrfs_use_zone_append. This avoids the possibility of
artificially limited read size on zoned file systems.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
struct btrfs_bio has all the information needed for btrfs_use_append, so
pass that instead of a btrfs_inode and file_offset.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of digging into the bio_vec in submit_one_bio, set file_offset at
bio allocation time from the provided parameter. This also ensures that
the file_offset is available all the time when building up the bio
payload.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_ordered_extent->disk_bytenr can be rewritten by the zoned I/O
completion handler, and thus in general is not a good idea to limit I/O
size. But the maximum bio size calculation can easily be done using the
file_offset fields in the btrfs_ordered_extent and btrfs_bio structures,
so switch to that instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the search loop of the binary search function, we are doing a division
by 2 of the sum of the high and low slots. Because the slots are integers,
the generated assembly code for it is the following on x86_64:
0x00000000000141f1 <+145>: mov %eax,%ebx
0x00000000000141f3 <+147>: shr $0x1f,%ebx
0x00000000000141f6 <+150>: add %eax,%ebx
0x00000000000141f8 <+152>: sar %ebx
It's a few more instructions than a simple right shift, because signed
integer division needs to round towards zero. However we know that slots
can never be negative (btrfs_header_nritems() returns an u32), so we
can instead use unsigned types for the low and high slots and therefore
use unsigned integer division, which results in a single instruction on
x86_64:
0x00000000000141f0 <+144>: shr %ebx
So use unsigned types for the slots and therefore unsigned division.
This is part of a small patchset comprised of the following two patches:
btrfs: eliminate extra call when doing binary search on extent buffer
btrfs: do unsigned integer division in the extent buffer binary search loop
The following fs_mark test was run on a non-debug kernel (Debian's default
kernel config) before and after applying the patchset:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
FILES=100000
THREADS=$(nproc --all)
FILE_SIZE=0
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Results before applying patchset:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 174472.0 11549868
4 2400000 0 253503.0 11694618
4 3600000 0 257833.1 11611508
6 4800000 0 247089.5 11665983
6 6000000 0 211296.1 12121244
10 7200000 0 187330.6 12548565
Results after applying patchset:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 207556.0 11393252
4 2400000 0 266751.1 11347909
4 3600000 0 274397.5 11270058
6 4800000 0 259608.4 11442250
6 6000000 0 238895.8 11635921
8 7200000 0 211942.2 11873825
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
