summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)Author
2014-11-30Merge 3.18-rc7 into usb-nextGreg Kroah-Hartman
We need the xhci fixes here and this resolves a merge issue with drivers/usb/dwc3/ep0.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-28Merge tag 'v3.19-rockchip-clk2' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next - clock phase setting capability for the rk3288 mmc clocks - pll init to allow syncing to actual rate table values - some more exported clocks - fixes for some clocks (typos etc) all of them not yet used in actual drivers
2014-11-28Merge tag 'imx-dt-3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "The i.MX device tree changes for 3.19" from Shawn Guo: - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, ADC etc. - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support - Improve SSI clocks description for i.MX5 platforms - Add ENET2 support for imx6sx-sdb board - Add device tree source for LS1021A SoC, board QDS and TWR - Enable cpufreq support for i.MX53 - Enable VPU device support for i.MX6QDL - Enable poweroff support for i.MX6 SoCs - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q - Create generic base device trees for Vybrid and add support for Colibri VF50 Note: the change set is built on top of imx-soc-3.19 to resolve the dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM clock". * tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits) ARM: dts: imx6q-tbs2910: Enable snvs-poweroff ARM: dts: imx6: add pm_power_off support for i.mx6 chips ARM: dts: vf-colibri: add USB regulators ARM: dts: imx6: phyFLEX: Add CAN support ARM: dts: imx6: phyFLEX: Add PCIe ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic ARM: dts: imx6: phyFLEX: Enable gpmi in module file ARM: dts: imx6: phyFLEX: set nodes in alphabetical order ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC ARM: dts: vf-colibri: Add I2C support ARM: dts: imx6qdl: Enable CODA960 VPU ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property ARM: dts: vf610: enable USB misc/phy nodes where necessary ARM: dts: vf610: use new GPIO support ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 ARM: dts: vf500-colibri: add Colibri VF50 support ARM: dts: vf610: create generic base device trees ARM: dts: vf610: assign oscillator to clock module dt-bindings: arm: add Freescale LS1021A SoC device tree binding ... Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-11-28Merge tag 'imx-soc-3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc Pull "The i.MX SoC update for 3.19" from Shawn Guo - Update i.MX6 suspend code to check DDR instead of CPU type, as the difference we need to handle is between LPDDR2 and DDR3, not SoCs. - Set anatop properly for LPDDR2 in DSM mode - Add support for new SoC LS1021A which integrates dual Cortex-A7 - Add ENET initialization for i.MX6SX platform - Add cpufreq support for i.MX53 platform - Add a SNVS based poweroff driver for i.MX6 platforms - Use ARM Global Timer as clocksource on VF610 Note: the change set is built on top of tag imx-fixes-3.18-2 to resolve a conflict on file arch/arm/mach-imx/clk-vf610.c. * tag 'imx-soc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ARM: imx: clk-vf610: get input clocks from assigned clocks ARM: imx: Add Freescale LS1021A SMP support ARM: imx: Add initial support for Freescale LS1021A ARM: imx53: add cpufreq support ARM: imx53: clk: add ARM clock ARM: imx: add CPU clock type ARM: imx5: add step clock, used when reprogramming PLL1 ARM: imx: add enet init for i.mx6sx ARM: imx6sx: add imx6sx iomux-gpr field define ARM: vf610: Add ARM Global Timer clocksource option ARM: imx: add anatop settings for LPDDR2 when enter DSM mode ARM: imx: replace cpu type check with ddr type check ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-11-28clk: rockchip: add bindings for the mmc clocksAlexandru M Stan
These clocks represent the physical clocks (including phases) and they will later be used for clock phase tuning. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-28clk: rockchip: rk3288 export i2s0_clkout for use in DTSonny Rao
This exposes the clock that comes out of the i2s block which generally goes to the audio codec. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> [removed CLK_SET_RATE_PARENT from original patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-26Merge tag 'v3.18-rc4' into regulator-max77802Mark Brown
Linux 3.18-rc4
2014-11-26clk: rockchip: add binding ID for DMC (memory controller) clocks on rk3288Jeff Chen
The DMC clocks need to be turned off at runtime, so we should have IDs so we can export them. Signed-off-by: Jeff Chen <cym@rock-chips.com> [dianders: split into two patches; adjusted commit msg] Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-26clk: tegra: Implement memory-controller clockThierry Reding
The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26phy: add support for USB cluster on the Armada 375 SoCGregory CLEMENT
The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
https://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "The fixes for the clock framework are all regressions in drivers, plus a single fix in one of the basic clock templates. No fixes to the core this time around. As with most clock driver fixes these run the gamut from fixing a build warning to fixing wrecked memory timings, with a little USB tossed in for fun" * tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux: clk: pxa: fix pxa27x CCCR bit usage clk-divider: Fix READ_ONLY when divider > 1 clk: qcom: Fix duplicate rbcpr clock name clk: at91: usb: fix at91sam9x5 recalc, round and set rate clk: at91: usb: fix at91rm9200 round and set rate
2014-11-24Merge branch 'clk-fixes' into clk-nextMichael Turquette
2014-11-24of: Add binding document for MIPS GICAndrew Bresticker
The Global Interrupt Controller (GIC) present on certain MIPS systems can be used to route external interrupts to individual VPEs and CPU interrupt vectors. It also supports a timer and software-generated interrupts. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8420/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-23ARM: imx53: clk: add ARM clockLucas Stach
The ARM clock is a virtual clock feeding the ARM partition of the SoC. It controls multiple other clocks to ensure the right sequencing when cpufreq changes the CPU clock rate. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-11-23ARM: imx5: add step clock, used when reprogramming PLL1Lucas Stach
This is the bypass clock used to feed the ARM partition while we reprogram PLL1 to another rate. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-11-21Merge tag 'renesas-dt2-for-v3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman: * Add labels for LEDs on kzm9g-reference and koelsch * Add Sound support to r8a7790/lager and r8a7791/koelsch * Add IIC DMA nodes to r8a7790 and r8a7791 * Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4 * Add SGX, MMP and VSP1 clocks to r8a7794 * Add USBDMAC{0,1} clocks to r8a7790 and r8a7791 * tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits) ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree ARM: shmobile: r8a7794: Add SGX clock to device tree ARM: shmobile: koelsch: add Volume Ramp usage on comment ARM: shmobile: lager: add Volume Ramp usage on comment ARM: shmobile: r8a7791: add DMA nodes for IIC ARM: shmobile: r8a7790: add DMA nodes for IIC ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs ARM: shmobile: koelsch dts: Add labels for the LEDs ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties ARM: shmobile: koelsch: Sound DMA support via DVC on DTS ARM: shmobile: koelsch: Sound DMA support via SRC on DTS ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS ARM: shmobile: koelsch: Sound DMA support on DTS ARM: shmobile: koelsch: Sound PIO support on DTS ARM: shmobile: koelsch: fixup I2C2 clock frequency ARM: shmobile: lager: Sound DMA support via DVC on DTS ARM: shmobile: lager: Sound DMA support via SRC on DTS ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20Merge tag 'sti-dt-for-v3.19-2' of ↵Arnd Bergmann
git://git.stlinux.com/devel/kernel/linux-sti into next/dt Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin: Highlights: ----------- - Refactor STiH407 SoC and board to add STiH410 SoC support - Add USB support to STiH416 SoC * tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000 ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support. ARM: STi: DT: STih407: Abstract common dt nodes into shared files. ARM: STi: DT: STiH410: Add pinctl config for usb controllers. ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers. ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy ARM: STi: DT: STiH416: Add pinctl setup for usb controllers. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-20of: Add bindings for nvidia,tegra124-socthermMikko Perttunen
This adds binding documentation and headers for the Tegra124 SOCTHERM device tree node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-19Merge tag 'renesas-dt-for-v3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman: * Add Add SoC-specific SATA compatible property to r8a7779 * Enable DMA for MMCIF on r8a7791 and r8a7790 * Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790 * Enable TMU timer via DT on r8a7778 * Enable CMT timer via DT on r8a73a4 * Add MMP and {SR}GX clocks to r8a7791 and r8a7790 * Correct scifa2 clock index on r8a7740 * Add missing INTCA for irqpin on r8a7740 * tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits) ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes ARM: shmobile: r8a7791: Add MMCIF0 DT node ARM: shmobile: r8a7790: Rename mmcif node to mmc ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property ARM: shmobile: henninger: enable HS-USB ARM: shmobile: koelsch: enable HS-USB ARM: shmobile: r8a7791: add HS-USB device node ARM: shmobile: lager: enable HS-USB ARM: shmobile: r8a7790: add HS-USB device node ARM: shmobile: r8a7791: add USB3.0 device node ARM: shmobile: lager: enable USB3.0 ARM: shmobile: r8a7790: add USB3.0 device node ARM: shmobile: r8a7794: Add arch_timer to device tree ARM: shmobile: bockw-reference: Initialise TMU device using DT ARM: shmobile: r8a7778: Add TMU nodes ARM: shmobile: armadillo800eva dts: Enable TMU0 ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge branch 'for-v3.19/exynos-clk' of git://linuxtv.org/snawrocki/samsung ↵Michael Turquette
into clk-next-exynos
2014-11-19ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device treeYoshifumi Hosoya
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7794: Add SGX clock to device treeKouei Abe
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-18ARM: STi: DT: STiH410: Add defines for STiH410 DT clocksPeter Griffin
Although most clock outputs are the same as stih407 SoC, stih410 also has some additional new clock outputs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-17clk: qcom: Fix duplicate rbcpr clock nameGeorgi Djakov
There is a duplication in a clock name for apq8084 platform that causes the following warning: "RBCPR_CLK_SRC" redefined Resolve this by adding a MMSS_ prefix to this clock and making its name coherent with msm8974 platform. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-16Merge tag 'omap-fixes-against-v3.18-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc4" from Tony Lindgren: Few omap fixes for hangs and wrong pinctrl defines, and update MAINTAINERS file to avoid missing PMIC and SoC related patches: - Fix random hangs on am437x because of incorrect default value for the DDR regulator - Fix wrong partition name for NAND on am335x-evm - Fix wrong pinctrl defines for dra7xx - Update maintainers entries for PMICs and SoCs * tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-12clk: mmp: add mmp2 DT support for clock driverChao Xie
It adds the DT support for mmp2 clock subsystem. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-12clk: mmp: add pxa910 DT support for clock driverChao Xie
It adds the DT support for pxa910 clock subsystem. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-12clk: mmp: add pxa168 DT support for clock driverChao Xie
It adds the DT support for pxa168 clock subsystem. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-11phy: Add PHY header file for DT x Driver definesGabriel FERNANDEZ
This provides the shared header file which will be reference from both PHY driver and its associated Device Tree node(s). Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
2014-11-10pinctrl: dra: dt-bindings: Fix output pull up/downRoger Quadros
For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the PULL_DIS bit which disables the PULLs. PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't use it in the PIN_OUTPUT_PULLUP/DOWN macros. Fixes: 23d9cec07c58 ("pinctrl: dra: dt-bindings: Fix pull enable/disable") Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: shmobile: r8a7791: Add Audio DMAC devices to DTKuninori Morimoto
Instantiate the two Audio DMA controllers in the r8a7791 device tree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [geert: corrected spelling of audmac1] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: shmobile: r8a7790: Add Audio DMAC devices to DTKuninori Morimoto
Instantiate the two Audio DMA controllers in the r8a7790 device tree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [geert: corrected spelling of audmac1] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-08Merge tag 'sti-dt-for-v3.19-1' of ↵Olof Johansson
git://git.stlinux.com/devel/kernel/linux-sti into next/dt Merge "STi DT updates for v3.19, round 1" from Maxime Coquelin: Highlights: ----------- - Add SDHCI support for STiH41x B2020 boards - Add reset controllers to STiH407 SoC - Add MiPHY & SATA support to STiH416 - Add Thermal supportto STiH416 - Add Clock support to STiH407 SoC This tag also includes STiH407 bindings definitions for reset controller. * tag 'sti-dt-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: DT: STiH407: Fix: clk-tmds-hdmi clock is missing ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9 ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3 ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0 ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0 ARM: DT: STi: STiH416: Add DT node for ST's SATA device ARM: DT: STi: STiH416: Add DT node for MiPHY365x ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards. ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs ARM: STi: DT: Add sdhci controller for stih415 ARM: STi: DT: Add sdhci pin configuration for stih415 ARM: STi: DT: Add sdhci controller for stih416 ARM: STi: DT: Add sdhci pins for stih416 ARM: sti: Add STiH407 reset controller support. ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase reset: stih407: Add reset controllers DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-06dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driverLudovic Desroches
New atmel DMA controller known as XDMAC, introduced with SAMA5D4 devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-04ARM: imx: clk-vf610: define PLL's clock treeStefan Agner
So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized by boot loader and the kernel code defined fixed rates according to those default configurations. Beginning with the USB PLL7 the code started to initialize the PLL's itself (using imx_clk_pllv3). However, since commit dc4805c2e78ba5a22ea1632f3e3e4ee601a1743b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver) imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits, hence the USB PLL were not configured correctly anymore. This patch not only fixes those USB PLL's, but also makes use of the imx_clk_pllv3 for all PLL's and alignes the code with the PLL support of the i.MX6 series. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-04ARM: shmobile: r8a7794: Add VIN clock to device treeKoji Matsuoka
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-31ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocksGabriel FERNANDEZ
This patch adds all clock defines for clockgen C0,D0,D2 and D3 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31clk: samsung: exynos7: add gate clock for ADC blockAbhilash Kesavan
Add clock support for the ADC interface in Exynos7. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31clk: samsung: exynos7: add gate clocks for WDT, TMU and PWM blocksNaveen Krishna Ch
Add clock support for the watchdog timer, pwm timer and thermal management unit IPs in Exynos7. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31clk: samsung: exynos7: add clocks for RTC blockNaveen Krishna Ch
Add clock support for the RTC block in Exynos7. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31clk: samsung: exynos7: add clocks for MMC blockNaveen Krishna Ch
Exynos7 supports 3 MMC channels, add the MMC gate clocks to support them. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31clk: samsung: exynos7: add clocks for I2C blockNaveen Krishna Ch
Exynos7 supports 12 I2C channels, add the I2C gate clocks to support them. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31clk: samsung: add initial clock support for Exynos7 SoCNaveen Krishna Ch
Add initial clock support for Exynos7 SoC which is required to bring up platforms based on Exynos7. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Reviewed-by: Thomas Abraham <thomas.ab@samsung.com> Tested-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0Gabriel FERNANDEZ
Patch adds DT entries for clockgen C0 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31reset: stih407: Add reset controllers DT bindingsMaxime Coquelin
This patch adds softreset, powerdown and picophy reset controllers DT bindings for the STiH407 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-30clk: samsung: exynos4415: Add clocks using common clock frameworkChanwoo Choi
This patch adds clock driver of Exynos4415 SoC based on Cortex-A9 using common clock framework. The CMU (Clock Management Unit) of Exynos4415 controls PLLs(Phase Locked Loops) and generates system clocks for CPU, busses and function clocks for individual IPs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-30ARM: shmobile: r8a7791: Add MMP clock to device treeYoshifumi Hosoya
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a7790: Add MMP clock to device treeYoshifumi Hosoya
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a7791: Add SGX clock to device treeKouei Abe
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a7790: Add RGX clock to device treeKouei Abe
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-13 00:43:11 +0000