| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
MT8195:
- add evaluation and demo board
MT8192:
- add new nodes: pwrap, PMIC, scp, USB, efuse, IOMMU, smi, DPI, PCIe,
SPMI, audio system, MMC and video enconder
- add evaluation board
MT8183:
- fix dtschema issues
- update compatible for the display ambient light processor (disp-aal)
- fix dtschema warning for the pumpki board
MT8173:
- add power domains to the video enconder nodes
- add GCE support to the display mutex node
MT7622:
- specify number of DMA requests explicitely
- specify level 2 cache topology
- add SPI-NAND flash device
- fix dtschema warnings for the System Companion Processor (SCP)
* tag 'v5.18-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (37 commits)
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
arm64: dts: mediatek: mt8195-demo: Remove input-name property
arm64: dts: mediatek: mt8183-pumpkin: fix bad thermistor node name
arm64: dts: mt7622: specify the L2 cache topology
arm64: dts: mt7622: specify the number of DMA requests
arm64: dts: mediatek: pumpkin: Remove input-name property
arm64: dts: mediatek: mt8173: Add gce-client-reg handle to disp-mutex
arm64: dts: mediatek: Add device-tree for MT8195 Demo board
dt-bindings: arm64: dts: mediatek: Add mt8195-demo board
arm64: dts: Add mediatek SoC mt8195 and evaluation board
arm64: dts: mt8192: Add mmc device nodes
arm64: dts: mt8183: Update disp_aal node compatible
arm64: dts: mt8192: Add audio-related nodes
arm64: dts: mt8192: Add spmi node
dt-bindings: arm: Add compatible for Mediatek MT8192
arm64: dts: mt6359: add PMIC MT6359 related nodes
arm64: dts: mediatek: mt8173: Add power domain to encoder nodes
arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes
...
Link: https://lore.kernel.org/r/2cd90ca7-7541-d47a-fec6-b0c64cf74fa3@gmail.com
Like the 32-bit branch, this contains an incompatible binding change
by removing the mediatek,larb properties from the dts files, so these
no longer work with kernels prior to 5.18.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.19
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
* tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits)
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
arm64: dts: qcom: sc7280: eDP for herobrine boards
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller
arm64: dts: qcom: sm8350-duo2: enable battery charger
arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
arm64: dts: qcom: pm8350c: Add pwm support
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7180: Remove ipa interconnect node
arm64: dts: qcom: sc7280-idp: Enable GPI DMAs
arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels
arm64: dts: qcom: sc7280: Add GPI DMAengines
arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)
arm64: dts: qcom: db845c: Add support for MCP2517FD
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd
arm64: dts: qcom: sm8250: camss: Add CCI definitions
...
Link: https://lore.kernel.org/r/20220509204451.325675-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.19:
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: fix semicolon.cocci warnings
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
soc: imx: imx8m-blk-ctrl: set power device name
soc: imx: gpcv2: add support for i.MX8MP power domains
soc: imx: gpcv2: add PGC control register indirection
Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.19:
- Various board compatible additions to fsl.yaml.
- Update fsl-imx-dma bindings to deprecate '#dma-channels' and
'#dma-requests'.
- Add bindings for i.MX8MP HDMI and media block control.
- Add vendor prefix for Storopack.
* tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add bosch acc board
dt-bindings: arm: fsl: Add Storopack i.MX7D SMEGW01 board
dt-bindings: vendor-prefixes: Add prefix for Storopack
dt-bindings: dmaengine: fsl-imx: deprecate '#dma-channels' and '#dma-requests'
dt-bindings: arm: fsl: add toradex,colibri-imx6ull
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
dt-bindings: arm: fsl: add ls1021a-iot board
dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
dt-bindings: arm: Add i.MX8M Plus Gateworks GW74xx board
dt-bindings: arm: fsl: add IMX8MN DDR3L eval board
dt-bindings: arm: fsl: Add carriers for toradex,colibri-imx6dl
dt-bindings: arm: fsl: imx6dl-colibri: Drop dedicated v1.1 bindings
dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
dt-bindings: arm: Add i.MX53 based Menlo board comment
dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
dt-bindings: arm: fsl: add TQ Systems boards based on i.MX6UL(L)
dt-bindings: arm: Add Data Modul i.MX8M Mini eDM SBC
dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
Link: https://lore.kernel.org/r/20220508033843.2773685-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add infracfg, toprgu, and ethsys reset-controller header file
for MT7986 platform.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220105100456.7126-2-sam.shih@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
1. Add toprgu reset-controller header file for MT8186.
2. Add DSI software reset bit which is controlled in MMSYS for MT8186.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220301054405.25021-3-rex-bc.chen@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.19-rc1
This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.
* tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add missing DFLL reset on Tegra210
arm64: tegra: Add memory controller channels
arm64: tegra: Enable ASRC on various platforms
arm64: tegra: Add ASRC device on Tegra186 and later
arm64: tegra: Update PWM fan node name
arm64: tegra: Add node for Tegra234 CCPLEX cluster
arm64: tegra: Add QSPI controllers on Tegra234
arm64: tegra: Update SDMMC1/3 clock source for Tegra194
Link: https://lore.kernel.org/r/20220506143005.3916655-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19 (take two)
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
ARM: dts: r9a06g032: Add USB PHY DT support
ARM: dts: r9a06g032: Add internal PCI bridge node
ARM: dts: r9a06g032: Describe the RTC
arm64: dts: renesas: Add interrupt-names to CANFD nodes
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g054: Fix external clk node names
arm64: dts: renesas: r9a07g044: Fix external clk node names
ARM: dts: r9a06g032: Fix the NAND controller node
ARM: dts: r9a06g032: Fill the UART DMA properties
ARM: dts: r9a06g032: Describe the DMA router
ARM: dts: r9a06g032: Add the two DMA nodes
arm64: dts: renesas: Remove empty rgb output endpoints
...
Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.19, part two
1. Cleanups: unused and undocumented dma-channels and dma-requests.
2. Add clock controllers to ExynosAutov9.
* tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: switch UFS clock node in ExynosAutov9
arm64: dts: exynos: switch USI clocks in ExynosAutov9
arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9
dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
dt-bindings: clock: add clock binding definitions for Exynos Auto v9
arm64: dts: fsd: drop useless 'dma-channels/requests' properties
arm64: dts: exynos: drop useless 'dma-channels/requests' properties
arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9
Link: https://lore.kernel.org/r/20220506081438.149192-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.19 (take two)
- Initial support for the R-Car V4H and RZ/V2M SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-drivers-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: R-Car V3U is R-Car Gen4
soc: renesas: rzn1: Select PM and PM_GENERIC_DOMAINS configs
soc: renesas: Add RZ/V2M (R9A09G011) config option
soc: renesas: rcar-rst: Add support for R-Car V4H
soc: renesas: Identify R-Car V4H
soc: renesas: r8a779g0-sysc: Add r8a779g0 support
dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779g0 SYSC power domain definitions
Link: https://lore.kernel.org/r/cover.1651828613.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The RTC section of the H616 manual mentions in a half-sentence the
existence of a clock "32K divided by PLL_PERI(2X)". This is used as
one of the possible inputs for the mux that selects the clock for the
32 KHz fanout pad. On the H616 this is routed to pin PG10, and some
boards use that clock output to compensate for a missing 32KHz crystal.
On the OrangePi Zero2 this is for instance connected to the LPO pin of
the WiFi/BT chip.
The new RTC clock binding requires this clock to be named as one input
clock, so we need to expose this to the DT. In contrast to the D1 SoC
there does not seem to be a gate for this clock, so just use a fixed
divider clock, using a newly assigned clock number.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-3-andre.przywara@arm.com
|
|
The H6 and H616 feature an (undocumented) bus clock gate for accessing
the RTC registers. This seems to be enabled at reset (or by the BootROM),
so we got away without it so far, but exists regardless.
Since the new RTC clock binding for the H616 requires this "bus" clock
to be specified in the DT, add this to R_CCU clock driver and expose it
on the DT side with a new number.
We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we
cannot reference it in any H6 DTs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-2-andre.przywara@arm.com
|
|
Renesas RZ/V2M DT Binding Definitions
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
|
|
Add modem reset for MSM8976.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220426073048.11509-3-a39.skl@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Renesas RZ/V2M DT Binding Definitions
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
|
|
Define RZ/V2M (R9A09G011) Clock Pulse Generator module clock outputs
(CPG_CLK_ON* registers), and reset definitions (CPG_RST_* registers)
in Section 48.5 ("Register Description") of the RZ/V2M Hardware User's
Manual (Rev. 1.10, Sep. 2021).
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_BUSMC
- CMU_CORE
- CMU_FYS2
- CMU_PERIC0 / C1
- CMU_PERIS
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-2-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This adds the defines for the power domains provided by the HDMI
blk-ctrl on the i.MX8MP.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.
There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.
This driver has been derived from the downstream Rockchip Kernel and
heavily modified:
- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs
The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Co-Developed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
[dt-binding-header:]
Acked-by: Rob Herring <robh@kernel.org>
[moved dt-binding header from dt-nodes patch to here
and made checkpatch --strict happier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-23-s.hauer@pengutronix.de
|
|
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add mt8186 iommu binding. "-mm" means the iommu is for Multimedia.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220503071427.2285-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In mt8195, we have a new IOMMU that is for INFRA IOMMU. its masters
mainly are PCIe and USB. Different with MM IOMMU, all these masters
connect with IOMMU directly, there is no mediatek,larbs property for
infra IOMMU.
Another thing is about PCIe ports. currently the function
"of_iommu_configure_dev_id" only support the id number is 1, But our
PCIe have two ports, one is for reading and the other is for writing.
see more about the PCIe patch in this patchset. Thus, I only list
the reading id here and add the other id in our driver.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This patch adds descriptions for mt8195 IOMMU which also use ARM
Short-Descriptor translation table format.
In mt8195, there are two smi-common HW and IOMMU, one is for vdo(video
output), the other is for vpp(video processing pipe). They connects
with different smi-larbs, then some setting(larbid_remap) is different.
Differentiate them with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
--------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
Another change is that we have a new IOMMU that is for infra master like
PCIe and USB. The infra master don't have the larb and ports, thus we
rename the port header file to mt8195-memory-port.h rather than
mt8195-larb-port.h.
Also, the IOMMU is not only for MM, thus, we don't call it "m4u" which
means "MultiMedia Memory Management UNIT". thus, use the "iommu" as the
compatiable string.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add DT bindings for the Meson-S4 SoC Reset Controller include file.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107023931.13251-3-zelong.dong@amlogic.com
|
|
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Renesas R-Car V4H DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
|
|
Renesas R-Car V4H DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
|
|
The sc8280xp has 13 power-domains controlled through the RPMh, document
the compatible and provide definitions for the power-domains - and their
active-only variants where applicable.
The SA8540p differs slightly in the power domains exposed, so add a
separate compatible for this, but reuse the constants to allow sharing
the DeviceTree source.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-2-bjorn.andersson@linaro.org
|
|
Add interconnect IDs for Qualcomm SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1649854415-11174-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This patch adds the new binding documentation for system clock
and functional clock on MediaTek MT8186.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220409132251.31725-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds device tree bindings for the externally routed clocks
CLKOUT1 and CLKOUT2 clocks found in the DB8500.
Cc: devicetree@vger.kernel.org
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-2-linus.walleij@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add all Clock Pulse Generator Core Clock Outputs for the Renesas
R-Car V4H (R8A779G0) SoC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20220425064201.459633-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add power domain indices for R-Car V4H (r8a779g0).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220425064201.459633-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Adds device tree binding documentation for clocks in the EN7523 SOC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220314084409.84394-2-nbd@nbd.name
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RTC reference and MSSPLL were previously not documented or defined,
as they were unused. Add their defines to the PolarFire SoC header.
Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-6-conor.dooley@microchip.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The Qualcomm SC8280XP platform has the usual set of busses, add a
binding for these interconnect providers and port definitions to allow
interconnect paths to be expressed in the sc8280xp DeviceTree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220408214835.624494-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
|
|
|
|
Add definitions of four clocks which need to be manipulated in order to
initialize the AHB bus which exposes the SCC block in the global address
space.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-2-michael.srba@seznam.cz
|
|
Add pixel clock for second LCDIFv3 interface. Both LCDIFv3 interfaces use
the same set of parent clock, so deduplicate imx8mp_media_disp1_pix_sels
into common imx8mp_media_disp_pix_sels and use it for both.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220313123949.207284-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Define RZ/G2UL (R9A07G043U) Clock Pulse Generator Core Clock and module
clock outputs, as listed in Table 7.1.4.2 ("Clock List r0.51") and also
add Reset definitions referring to registers CPG_RST_* in Section 7.2.3
("Register configuration") of the RZ/G2UL Hardware User's Manual (Rev.
0.51, Nov. 2021).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220402073037.23947-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for
LPASS core clocks and audio clock IDs for LPASS client to request for
the clocks.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220223172248.18877-1-tdas@codeaurora.org
|
|
The i.MX8MN has a General Purpose Timer (GPT) just like the i.MX8MM,
which already has such bindings. Add the relevant bindings for the Nano
SoC too.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220317223600.175894-1-alvin@pqrs.dk
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
|
|
Add RPM power domain bindings for the SDX65 SoC.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1647410837-22537-4-git-send-email-quic_rohiagar@quicinc.com
|
|
This adds the QSPI controllers on the Tegra234 SoC and populates the
SPI NOR flash device for the Jetson AGX Orin platform.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This adds the schema binding for the Cirrus Logic CS35L45 Smart Amp
and associated header file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220405135419.1230088-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
