summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2012-03-06mfd: Add pdata to set mc13783-ts conversion delayMichael Thalmeier
MC13783 can be programmed to wait some clock cycles between the touchscreen polarization and the resistance conversion. This is needed to adjust for touchscreens with high capacitance between plates. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add new mfd device for TPS65217AnilKumar Ch
The TPS65217 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators - White LED - USB battery charger This patch adds support for tps65217 mfd device. At this time only the regulator functionality is made available. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-28Merge branch 'irqdomain/next' into gpio/nextGrant Likely
2012-02-22Merge branch 'for_3.4/gpio/runtime-pm-cleanup' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2012-02-21ASoC: wm8994: Support external capacitors on MICBIAS2 with jack detectionMark Brown
When an external capacitor is connected to MICBIAS2 on devices with jack detection (which is not required but may be done in some systems) then the loading may mean that better performance is obtained when the microphone bias is enabled normally rather than using the low power mode. Provide platform data allowing systems to indicate if they require this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-18MFD: ucb1x00-core: add wakeup supportRussell King
Add genirq wakeup support for the ucb1x00 device. This allows an attached gpio_keys driver to wakeup the system. Touchscreen is also possible. When there are no wakeup sources, ask the platform to assert the reset signal to avoid any unexpected behaviour; this also puts the reset signal at the right level when power is removed from the device. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00: convert to use genirqRussell King
Convert the ucb1x00 driver to use genirq's interrupt services, rather than its own private implementation. This allows a wider range of drivers to use the GPIO interrupts (such as the gpio_keys driver) without being aware of the UCB1x00's private IRQ system. This prevents the UCB1x00 core driver from being built as a module, so adjust the configuration to add that restriction. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: mcp-core: remove legacy driver suspend/resume methodsRussell King
The legacy driver suspend/resume methods are no longer used, so get rid of them. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: convert to use dev_pm_opsRussell King
Convert the ucb1x00-core driver to use dev_pm_ops rather than the legacy members in the mcp driver. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: use mutexes instead of semaphoresRussell King
Convert the ucb1x00 driver to use mutexes rather than the depreciated semaphores for exclusive access to the ADC. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: ucb1x00-core: add handling for ucb1x00 resetRussell King
Provide a way to handle the software controlled ucb1x00 reset signal from the ucb1x00-core driver without having to code platform specifics into these drivers. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18MFD: mcp/ucb1x00: separate ucb1x00 driver data from the MCP dataRussell King
Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.) by Jochen Friedrich <jochen@scram.de>. This adds just the codec data part of the patch. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-05gpio: tps65910: Add sleep control supportLaxman Dewangan
The device tps65910/tps65911 supports the sleep functionality in some of gpios. If gpio is configured in output mode and sleep is enabled then during device sleep state, the output of gpio becomes LOW regardless of non-sleep output value. Such gpio can be used to control regulator switch such that output of regulator is off in device sleep state. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-03mfd: Store twl6040-codec mclk configurationPeter Ujfalusi
Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-03MFD: mcp-sa11x0: remove DMA initializers and variablesRussell King
The dma_device_t variables are only ever written to by mcp-sa11x0 and never read. As the old SA11x0 DMA support will be removed, remove these so that it no longer depends on the old SA11x0 DMA definitions. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-03MFD: mcp-core: sanitize host creation/removalRussell King
host_unregister() gives us no chance between removing the device and the mcp data structure being freed to access the data inbetween, which drivers may need to do if they need to iounmap() pointers in their private data structures. Therefore, re-jig the interfaces, which are now, on creation: mcp = mcp_host_alloc() if (mcp) { ret = mcp_host_add(mcp, data); if (!ret) mcp_host_free(mcp); } and on removal: mcp_host_del(mcp); ... access mcp ... mcp_host_free(mcp); The free does the final put_device() on the struct device as one would expect. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-30regulator: tps65910: Sleep control through external inputsLaxman Dewangan
Add support for sleep controls of different regulator through external inputs EN1, EN2 or EN3. Each regulator's output will be active when its external input is high and turns to OFF/Low power mode when its external input is low. The configuration parameters for sleep control is provided through board specific platform data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21MFD: mcp-core: fix mcp_priv() to be more type safeRussell King
mcp_priv() does unexpected things when passed a void pointer. Make it a typed inline function, which ensures that it works correctly in these cases. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King
bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-11Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config regulator: max8925: fix enabled/disabled judgement mistake regulator: add regulator_bulk_force_disable function regulator: pass regulator_register of_node in fixed voltage driver regulator: add regulator_force_disable() definition for !CONFIG_REGULATOR regulator: Enable supply regulator if child rail is enabled. regulator: mc13892: Convert to devm_kzalloc() regulator: mc13783: Convert to devm_kzalloc() regulator: Fix checking return value of create_regulator regulator: Fix the error handling if create_regulator fails regulator: Export regulator_is_supported_voltage() regulator: mc13892: add device tree probe support regulator: mc13892: remove the unnecessary prefix from regulator name regulator: Convert wm831x regulator drivers to devm_kzalloc() regulator: da9052: Staticize non-exported symbols regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case for da9052-regulator regulator: Update da9052-regulator for DT changes regulator: DA9052/53 Regulator support regulator: pass device_node to of_get_regulator_init_data() regulator: If a single voltage is set with device tree then set apply_uV ...
2012-01-10Merge git://git.infradead.org/users/cbou/battery-urgentAnton Vorontsov
2012-01-09mfd: Add pm ops to max8925Kevin Liu
Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add S5M core driverSangbeom Kim
S5M series are pmic including mutiple functional devices. It can support PMIC, RTC, Battery charger, codec. This patch implement core driver for s5m series. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 801Viresh Kumar
STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 610Viresh Kumar
STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Separate out STMPE controller and interface specific codeViresh Kumar
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data and devices for MAX8997 LED controlDonggeun Kim
MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add missing mutex.h inclusion to WM8994 core.hMark Brown
struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Constify WM8994 regulator_init_dataMark Brown
The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.Jochen Friedrich
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fixed unconditional reset of the mc13xxx ADC reading enable bitsRobin van der Gracht
When the ADC is being prepared for a single or multiple channel reading, the adc0 register is reconfigured without taking the lithium cell, charge current and battery current reading enable bits into account. Which results in clearing the bits. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data for MAX8997 MUIC driverDonggeun Kim
Currently, MAX8997 device does not support MUIC function of it. To add MAX8997 MUIC driver, header file should be updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert 88pm860x to use regmap apiJett.Zhou
Convert the 88pm860x normal bank register read/write to use the register map API. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Disable more pulls on WM8994Mark Brown
Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for irq over gpio pin to stmpeViresh Kumar
On many boards, stmpe is present as an separate device (not as part of SoC). Here gpio lines are mostly used for getting interrupts. This patch adds in support to handle irq over gpio pin. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-04Merge branch 'power-supply-scope' of ↵Anton Vorontsov
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
2011-12-22regulator: mc13892: add device tree probe supportShawn Guo
It adds device tree probe support for mc13892-regulator driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15mfd: Declare da9052_regmap_config for the bus driversMark Brown
Fixes build failures. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14MFD: DA9052/53 MFD core moduleAshish Jangam
The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13Merge branch 'mfd/wm8994' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
2011-12-13mfd: Convert wm8994 to use generic regmap irq_chipMark Brown
Factor out the irq_chip implementation, substantially reducing the code size for the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Mark WM1811 GPIO6 register volatile for later revisionsMark Brown
For later chip revisions the WM1811 GPIO6 register is always volatile so store the device revision when initialising the driver and then check at runtime if we're running on a newer device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Add missing mutex.h inclusion to WM8994 core.hMark Brown
struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Constify WM8994 regulator_init_dataMark Brown
The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Enable register cache for wm8994 devicesMark Brown
As part of this we provide information about the registers that exist in the device to the regmap core, drop the small amount of cache that the core had been using and let regmap do the sync. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Define some additional wm8994 registersMark Brown
Add a bunch of definitions for wm8994 registers that are not currently used by software. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 12:11:00 +0000