summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2017-04-27mfd: axp20x: Correct name of temperature data ADC registersQuentin Schulz
The registers 0x56 and 0x57 of AXP22X PMIC store the value of the internal temperature of the PMIC. This patch modifies the name of these registers from AXP22X_PMIC_ADC_H/L to AXP22X_PMIC_TEMP_H/L so their purpose is clearer. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: Add TI LMU driverMilo Kim
TI LMU (Lighting Management Unit) driver supports lighting devices below. LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. LMU devices have common features. - I2C interface for accessing device registers - Hardware enable pin control - Backlight brightness control - Notifier for hardware fault monitoring - Regulators for LCD display bias It contains fault monitor, backlight, LED and regulator driver. LMU fault monitor ----------------- LM3633 and LM3697 provide hardware monitoring feature. It enables open or short circuit detection. After monitoring is done, each device should be re-initialized. Notifier is used for this case. Separate patch for 'ti-lmu-fault-monitor' will be sent later. Backlight --------- It's handled by TI LMU backlight consolidated driver and chip dependent data. Separate patchset will be sent later. LED indicator ------------- LM3633 has 6 indicator LEDs. Programmable dimming pattern is also supported. Separate patch for 'leds-lm3633' will be sent later. Regulator --------- LM3631 has 5 regulators for the display bias. LM3632 supports 3 regulators. One consolidated driver enables it. The lm363x regulator driver is already upstreamed. Signed-off-by: Milo Kim <milo.kim@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: cros_ec: Add ACPI GPE handler for LID0 devicesArchana Patni
This patch installs an ACPI GPE handler for LID0 ACPI device to indicate ACPI core that this GPE should stay enabled for lid to work in suspend to idle path. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27Merge branches 'ib-mfd-gpio-4.12', 'ib-mfd-iio-input-4.12', ↵Lee Jones
'ib-mfd-input-4.12', 'ib-mfd-leds-4.12', 'ib-mfd-phy-4.12' and 'ib-mfd-pinctrl-samsung-4.12' into ibs-for-mfd-merged
2017-04-25regulator: arizona-ldo1: Move pdata into a separate structureRichard Fitzgerald
In preparation for sharing this driver with Madera, move the pdata for the LDO1 regulator out of struct arizona_pdata into a dedicated pdata struct for this driver. As a result the code in arizona_ldo1_of_get_pdata() can be made independent of struct arizona. This patch also updates the definition of struct arizona_pdata and the use of this pdata in mach-crag6410-module.c Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25regulator: arizona-micsupp: Move pdata into a separate structureRichard Fitzgerald
In preparation for sharing this driver with Madera, move the pdata for the micsupp regulator out of struct arizona_pdata into a dedicated pdata struct for this driver. As a result the code in arizona_micsupp_of_get_pdata() can be made independent of struct arizona. This patch also updates the definition of struct arizona_pdata and the use of this pdata in mach-crag6410-module.c Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18Merge tag 'iio-for-4.12d' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fourth set of IIO new device support, features and cleanups for the 4.12 cycle New device support * max1117, 1118 and 1119 - new ADC driver * max9611 - new ADC driver * pm8xxx hk/xoadc - new driver with some shared features broken out from the SPMI vadc. * sun4i-gpadc - A33 thermal sensor support (with associated rework) * stm32-dac - new driver and bindings * stm32 trigger - enable support of quadrature encoder device and counter modes Features * apds9960 - use the runtime pm for normal suspend * stm32-adc - add opition to sest resolution via devicetree * xoadc - augment DT bindings to deal with some weird mux cases Cleanups * ad5933 - protect direct mode using claim and release helpers * ade7759 - S_IRUGO and friends to octal in two goes * adis16203 - drop unnecessary brackets * hid-sensor - fix unbalanced pm_runtieme_enable error when probing after remove * lsm6dsx - use actual part numbers for device name when known - simplify data read pin parsing * mpu3050 - avoid double reporting errors
2017-04-14iio: stm32 trigger: Add quadrature encoder deviceBenjamin Gaignard
One of the features of STM32 trigger hardware block is a quadrature encoder that can counts up/down depending of the levels and edges of the selected external pins. This patch allow to read/write the counter, get it direction, set/get quadrature modes and get scale factor. When counting up preset value is the limit of the counter. When counting down the counter start from preset value down to 0. This preset value could be set/get by using /sys/bus/iio/devices/iio:deviceX/in_count0_preset attribute. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-11mfd: cpcap: Implement IRQ sense helperSebastian Reichel
CPCAP can sense if IRQ is currently set or not. This functionality is required for a few subdevices, such as the power button and usb phy modules. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-10Merge 4.11-rc6 into staging-nextGreg Kroah-Hartman
We want the staging and iio fixes in here to handle merging easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-10phy: exynos5: Remove duplicated defines of PHY register definesKrzysztof Kozlowski
Phy drivers access PMU region through regmap provided by exynos-pmu driver. However there is no need to duplicate defines for PMU registers. Instead just use whatever is defined in exynos-regs-pmu.h. This reduces number of defines. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10phy: exynos4: Remove duplicated defines of PHY register definesKrzysztof Kozlowski
Phy drivers access PMU region through regmap provided by exynos-pmu driver. However there is no need to duplicate defines for PMU registers. Instead just use whatever is defined in exynos-regs-pmu.h. Additionally MIPI PHY registers for Exynos5433 start from the same address as Exynos4 and Exynos5250 so re-use existing defines. This reduces number of defines and allows removal of one header file. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-08iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensorQuentin Schulz
This adds support for the Allwinner A33 thermal sensor. Unlike the A10, A13 and A31, the Allwinner A33 only has one channel which is dedicated to the thermal sensor. Moreover, its thermal sensor does not generate interruptions, thus we only need to directly read the register storing the temperature value. The MFD used by the A10, A13 and A31, was created to avoid breaking the DT binding, but since the nodes for the ADC weren't there for the A33, it is not needed. Though the A33 does not have an internal ADC, it has a thermal sensor which shares the same registers with GPADC of the already supported SoCs and almost the same bits, for the same purpose (thermal sensor). The thermal sensor behaves exactly the same (except the presence of interrupts or not) on the different SoCs. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-05mfd: cros-ec: Fix host command buffer sizeVic Yang
For SPI, we can get up to 32 additional bytes for response preamble. The current overhead (2 bytes) may cause problems when we try to receive a big response. Update it to 32 bytes. Without this fix we could see a kernel BUG when we receive a big response from the Chrome EC when is connected via SPI. Signed-off-by: Vic Yang <victoryang@google.com> Tested-by: Enric Balletbo i Serra <enric.balletbo.collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-04PCI: imx6: Add code to support i.MX7DAndrey Smirnov
Add various bits of code needed to support i.MX7D variant of the IP. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Cc: yurovsky@gmail.com Cc: Mark Rutland <mark.rutland@arm.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dong Aisheng <dongas86@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org
2017-04-03Merge tag 'v4.11-rc5' into nextDmitry Torokhov
Sync up with mainline to bring in changes to input subsystem merged through other trees.
2017-04-03Input: cros_ec_keyb - add an EC event for sysrqRajat Jain
Some form factors (detachables/tablets) may not have a keyboard and thus user may have to resort to using a defined EC UI to send sysrq(s) to the kernel in order to collect crash info etc. This UI typically is in the form of user pressing volume / power buttons in some specific sequence and for some specific time. Add a new EC event that allows EC to communicate the sysrq to the AP. (We're skipping event number 5 because it has been reserved for something else) Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-28mfd: cpcap: Add missing include dependenciesSebastian Reichel
This fixes compilation for files, that try to include the cpcap header in alphabetically sorted #include lists. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-03-23mfd: mxs-lradc: Add support for mxs-lradcKsenija Stanojevic
Add core files for low resolution analog-to-digital converter (mxs-lradc) MFD driver. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-03-23mfd: wm831x: Add basic device tree bindingCharles Keepax
Add the basic ability to register the device through device tree, more work is needed to get each individual sub-driver functioning correctly but this is enough to get the device to probe from device tree. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-03-08iio: adc: add support for Allwinner SoCs ADCQuentin Schulz
The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. This patch adds the ADC driver which is based on the MFD for the same SoCs ADC. This also registers the thermal adc channel in the iio map array so iio_hwmon could use it without modifying the Device Tree. This registers the driver in the thermal framework. The thermal sensor requires the IP to be in touchscreen mode to return correct values. Therefore, if the user is continuously reading the ADC channel(s), the thermal framework in which the thermal sensor is registered will switch the IP in touchscreen mode to get a temperature value and requires a delay of 100ms (because of the mode switching), then the ADC will switch back to ADC mode and requires also a delay of 100ms. If the ADC readings are critical to user and the SoC temperature is not, this driver is capable of not registering the thermal sensor in the thermal framework and thus, "quicken" the ADC readings. This driver probes on three different platform_device_id to take into account slight differences (registers bit and temperature computation) between Allwinner SoCs ADCs. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-27Merge tag 'rtc-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - constify rtc_class_ops structures New driver: - STM32 Drivers: - armada38x: fix errata, Armada 7K/8K support - ds3232: fix wakeup support - gemini: DT support - m48t86: huge cleanup and platform_data removal - mcp795: alarm support - sun6i: proper oscillator handling - tegra: proper clock handling - tps65910: calibration support" * tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits) rtc: ds3232: Call device_init_wakeup before device_register rtc: pcf2127: bulk read only date and time registers. rtc: armada38x: Add support for Armada 7K/8K rtc: armada38x: Prepare driver to manage different versions rtc: ds3232: Add regmap max_register definition. rtc: ds3232: Cleanup whitespace around register and bit definitions. rtc: m48t86: remove unused platform_data ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources ARM: Orion5x: ts78xx: remove RTC detection ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources rtc: m48t86: verify that the RTC is actually present rtc: m48t86: add NVRAM support rtc: m48t86: allow driver to manage its resources rtc: m48t86: shorten register name defines bindings: rtc: correct wrong reference in required properties rtc: sun6i: Fix return value check in sun6i_rtc_clk_init() rtc: sun6i: extend test coverage rtc: sun6i: Fix compatibility with old DT binding rtc: snvs: add a missing write sync rtc: bq32000: add support to enable disable the trickle charge FET bypass ...
2017-02-23Merge tag 'mfd-for-linus-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC - List include/dt-bindings/mfd/* to files supported in MAINTAINERS New Drivers: - Intel Apollo Lake SPI NOR - ST STM32 Timers (Advanced, Basic and PWM) - Motorola 6556002 CPCAP (PMIC) New Device Support: - Add support for AXP221 to axp20x - Add support for Intel Gemini Lake to intel-lpss-pci - Add support for MT6323 LED to mt6397-core - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6, COMe-cAL6 and COMe-cKL6 to kempld-core New Functionality: - Add support for Analog CODAC to sun6i-prcm - Add support for Watchdog to lpc_ich Fix-ups: - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl - Adapt platform data handling; axp20x - IRQ handling improvements; arizona, axp20x - Remove superfluous code; arizona, axp20x, lpc_ich - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt - Regmap fix-ups; axp20x - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912, mt6397 - Use new I2C probing mechanism; max77686 - Constification; rk808 Bug Fixes: - Stop data transfer whilst suspended; cros_ec" * tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (43 commits) mfd: lpc_ich: Enable watchdog on Intel Apollo Lake PCH mfd: lpc_ich: Remove useless comments in core part mfd: Add support for several boards to Kontron PLD driver mfd: constify regmap_irq_chip structures MAINTAINERS: Add include/dt-bindings/mfd to MFD entry mfd: cpcap: Add minimal support mfd: mt6397: Add MT6323 LED support into MT6397 driver Documentation: devicetree: Add LED subnode binding for MT6323 PMIC mfd: tps65912: Export OF device ID table as module aliases mfd: ab8500-core: Rename clock device and compatible mfd: cros_ec: Send correct suspend/resume event to EC mfd: max77686: Remove I2C device ID table mfd: max77686: Use the struct i2c_driver .probe_new instead of .probe mfd: max77686: Use of_device_get_match_data() helper mfd: max77686: Don't attempt to get i2c_device_id .data mfd: ab8500-sysctrl: Handle probe deferral mfd: intel-lpss: Add Intel Gemini Lake PCI IDs mfd: axp20x: Fix AXP806 access errors on cold boot mfd: cros_ec: Send suspend state notification to EC mfd: cros_ec: Prevent data transfer while device is suspended ...
2017-02-22Merge tag 'staging-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio driver updates from Greg KH: "Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits) Staging: vc04_services: Fix the "space prohibited" code style errors Staging: vc04_services: Fix the "wrong indent" code style errors staging: octeon: Use net_device_stats from struct net_device Staging: rtl8192u: ieee80211: ieee80211.h - style fix Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix Staging: rtl8192u: r8192U.h - style fix Staging: rtl8192u: r8192U_core.c - style fix Staging: rtl8192u: r819xU_cmdpkt.c - style fix staging: rtl8192u: blank lines aren't necessary before a close brace '}' staging: rtl8192u: Adding space after enum and struct definition staging: rtl8192u: Adding space after struct definition Staging: ks7010: Add required and preferred spaces around operators Staging: ks7010: ks*: Remove redundant blank lines Staging: ks7010: ks*: Add missing blank lines after declarations staging: visorbus, replace init_timer with setup_timer staging: vt6656: rxtx.c Removed multiple dereferencing staging: vt6656: Alignment match open parenthesis ...
2017-02-21Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Marvell SD8787 Wifi/BT chip - Improve UHS support for SDIO - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode - Detect Auto BKOPS enable bit - Export eMMC device lifetime information through sysfs - First take to slim down the public mmc headers to avoid abuse - Re-factoring of the mmc block device driver to prepare for blkmq - Cleanup code for the mmc block device driver - Clarify and cleanup code dealing with data requests - Cleanup some code by converting to ida_simple_ functions - Cleanup code dealing with card quirks - Cleanup private and public mmc header files MMC host: - Don't rely on public mmc headers to include non-mmc related headers - meson: Add support for eMMC HS400 mode - meson: Various cleanups and improvements - omap_hsmmc: Use the proper provided busy timeout from the core - sunxi: Enable new timings for the A64 MMC controllers - sunxi: Improvements for clock management - tmio: Improvements for SDIO interrupts - mxs-mmc: Add CMD23 support - sdhci-msm: Enable HS400 enhanced strobe mode support - sdhci-msm: Correct HS400 tuning sequence - sdhci-acpi: Support deferred probe - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD - mediatek: Correct the implementation of card busy detection - dw_mmc: Initial support for ZX mmc controller - sh_mobile_sdhi: Enable support for eMMC HS200 mode - sh_mmcif: Various cleanups and improvements" * tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits) mmc: core: add mmc prefix for blk_fixups mmc: core: move all quirks together into quirks.h mmc: core: improve the quirks for sdio devices mmc: core: move some sdio IDs out of quirks file mmc: core: change quirks.c to be a header file mmc: sdhci-cadence: fix bit shift of read data from PHY port mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support mmc: MAN_BKOPS_EN inverse debug message logic mmc: meson-gx: add support for HS400 mode mmc: meson-gx: remove unneeded checks in remove mmc: meson-gx: reduce bounce buffer size mmc: meson-gx: set max block count and request size mmc: meson-gx: improve interrupt handling mmc: meson-gx: improve meson_mmc_irq_thread mmc: meson-gx: improve meson_mmc_clk_set mmc: meson-gx: minor improvements in meson_mmc_set_ios mmc: meson: Assign the minimum clk rate as close to 400KHz as possible mmc: core: start to break apart mmc_start_areq() mmc: block: respect bool returned from blk_end_request() mmc: block: return errorcode from mmc_sd_num_wr_blocks() ...
2017-02-20Merge tag 'for-v4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - sbs-charger driver - max14656_charger_detector - axp20x_ac_power New chip/feature support" - axp20x_usb_power: add AXP223 support - tps65217: add usb charger support - qcom_smbb: support otg regulator - at91-reset: add samx7 support Dropped drivers: - intel_mid_battery (platform was dropped) Fixes: - at91-poweroff: avoid wearing off LPDDR memory - replace deprecated extcon API - lots of cleanup and style fixes - misc minor functionality fixes" * tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits) power: supply: add AC power supply driver for AXP20X and AXP22X PMICs dt-bindings: power: supply: add AXP20X/AXP22X AC power supply power: supply: axp20x_usb_power: use IIO channels when available power: supply: max14656: Export I2C and OF device ID as module aliases power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference power: supply: bq24190_charger: Adjust formatting power: supply: bq24190_charger: Handle fault before status on interrupt power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread() power: supply: bq24190_charger: Call power_supply_changed() for relevant component power: supply: bq24190_charger: Install irq_handler_thread() at end of probe() power: supply: bq24190_charger: Call set_mode_host() on pm_resume() power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING power: supply: qcom_smbb: add regulator dependency power: reset: at91-reset: remove leftover platform_device_id power: reset: at91-reset: add samx7 support power: supply: max14656: fix platform_no_drv_owner.cocci warnings power: supply: pcf50633-charger: Compress return logic into one line. power: supply: ab8500_btemp: Compress return logic into one line. power: reset: at91-poweroff: timely shutdown LPDDR memories ARM: at91: define LPDDR types ...
2017-02-13mmc: host: tmio: SDIO_STATUS_QUIRK is rather SDIO_STATUS_SETBITSWolfram Sang
QUIRK sounds like there is something wrong, but actually there are just some bits which need to be 1. Rename it to be more clear. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mfd: cpcap: Add minimal supportTony Lindgren
Many Motorola phones like droid 4 are using a custom PMIC called CPCAP or 6556002. We can support it's core features quite easily with regmap_spi and regmap_irq. The children of cpcap, such as regulators, ADC and USB, can be just regular device drivers and defined in the dts file. They get probed as we call of_platform_populate() at the end of our probe, and then the children can just call dev_get_regmap(dev.parent, NULL) to get the regmap. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Scott <michael.scott@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: cros_ec: Send suspend state notification to ECShawn Nematbakhsh
Notify EC when going to or returning from suspend so that proper actions related to wake events can be taken. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: cros_ec: Prevent data transfer while device is suspendedJoseph Lo
The cros_ec driver is still active while the device is suspended. Besides that, it also tries to transfer data even after the I2C host had been suspended. This patch uses a simple flag to prevent this. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: abx500: Fix spelling mistake: "Celcius" -> "Celsius"Colin Ian King
Trivial fix to spelling mistake in MFD headers. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: axp20x: Add a few missing defines for AXP288 specific registersHans de Goede
Add defines for the AXP288_POWER_REASON and AXP288_RT_BATT_V_H and AXP288_RT_BATT_V_L and AXP288_BC_* registers. While at it also move the AXP288_TS_ADC_H-AXP288_GP_ADC_L defines, which for some reason where in a different place, together with the rest of the AXP288 specific defines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: axp20x: Drop wrong AXP288_PMIC_ADC_EN defineHans de Goede
The adc-enable register for the axp288 is 0x82, not 0x84. 0x82 is already defined as AXP20X_ADC_EN1 and that is what the axp288_adc driver is actually using, so simply drop the wrong AXP288_PMIC_ADC_EN define. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: axp20x: Use IRQF_TRIGGER_LOW on the axp288Hans de Goede
The interrupt line of the entire family of axp2xx pmics is active-low, for devicetree enumerated irqs, this is dealt with in the devicetree. ACPI irq resources have a flag field for this too, I tried using this on my CUBE iwork8 Air tablet, but it does not contain the right data. The dstd shows the irq listed as either ActiveLow or ActiveHigh, depending on the OSID variable, which seems to be set by the "OS IMAGE ID" in the BIOS/EFI setup screen. Since the acpi-resource info is no good, simply pass in IRQF_TRIGGER_LOW on the axp288. Together with the other axp288 fixes in this series, this fixes the axp288 irq contineously triggering. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: axp20x: Correct a typo in axp20x_device_remove documentationCorentin Labbe
The documentation of axp20x_device_remove() have a typo and use axp20x_device_probe() as name. This patch fix this typo. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13Merge branches 'ib-mfd-arm-iio-pwm-4.11', 'ib-mfd-input-4.11-1', ↵Lee Jones
'ib-mfd-mtd-4.11' and 'ib-mfd-power-supply-4.11' into ibs-for-mfd-merged
2017-02-13input: cros_ec_keyb: Add Tablet Mode switchGwendal Grignou
Add switch to report tablet mode. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-08mfd: cros-ec: Update cros_ec_commands.h for buttons and switchesDouglas Anderson
Add the defines for the new buttons and switches connected to the CrosEC. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-28Merge tag 'ib-mfd-iio-pwm-4.11' into testJonathan Cameron
Immutable branch between MFD, IIO and PWM due for the v4.11 merge window Pulled into IIO to allow follow up series of triggered capture for the STM32 ADCs.
2017-01-28iio: cros_ec: Add cros_ec barometer driverGwendal Grignou
Handle the barometer sensor presented by the ChromeOS EC Sensor hub. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-23mfd: Add STM32 Timers driverBenjamin Gaignard
This hardware block could at used at same time for PWM generation and IIO timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 7: - rebase on v4.10-rc2 version 6: - rename files to stm32-timers - rename functions to stm32_timers_xxx version 5: - fix Lee comments about detect function - add missing dependency on REGMAP_MMIO version 4: - add a function to detect Auto Reload Register (ARR) size - rename the structure shared with other drivers version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-12power: supply: axp20x_usb_power: fix warning on 64bitMichal Suchanek
Casting of_device_get_match_data return value to int causes warning on 64bit architectures. ../drivers/power/supply/axp20x_usb_power.c: In function 'axp20x_usb_power_probe': ../drivers/power/supply/axp20x_usb_power.c:297:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: 0dcc70ca8644 ("power: supply: axp20x_usb_power: use of_device_id data field instead of device_is_compatible") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-10rtc: tps65910: Add RTC calibration supportVesa Jääskeläinen
Texas Instrument's TPS65910 has support for compensating RTC crystal inaccuracies. When enabled every hour RTC counter value will be compensated with two's complement value. Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-04power: supply: axp288_fuel_gauge: Drop platform_data dependencyHans de Goede
When the axp288_faul_gauge driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, resulting in x86 tablets / laptops with an axp288 having no working battery monitor, as before this commit the driver would simply return -ENODEV if there is no platform data. This commit removes the dependency on the platform_data instead checking that the firmware has initialized the fuel-gauge and reading the info back from the pmic. What is missing from the read-back info is the table to map raw adc values to temperature, so this commit drops the temperature and temperature limits properties. The min voltage, charge design and model name info is also missing. Note that none of these are really important for userspace to have. All other functionality is preserved and actually made available by this commit. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=88471 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-04power: supply: axp288_charger: Drop platform_data dependencyHans de Goede
When the axp288_charger driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, so the axp288_charger as merged upstream has never worked, its probe method simply always returns -ENODEV. This commit removes the dependency on the platform_data instead reading back the charging current and charging voltage that the firmware has set and using those values as the maximum values the user may set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-03mfd: lpc_ich: Add support for SPI serial flash host controllerMika Westerberg
Many Intel CPUs including Haswell, Broadwell and Baytrail have SPI serial flash host controller as part of the LPC device. This will populate an MFD cell suitable for the SPI host controller driver if we know that the LPC device has one. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-12-19Merge tag 'mfd-for-linus-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Ricoh RC5T619 PMIC to rn5t618 - Add support for PM8821 PMIC to qcom-pm8xxx New Functionality: - Add support for GPIO to lpc_ich - Add support for GPADC to sun4i - Add ability for rk808 to shutdown Fix-ups: - Simplify/strip unnecessary code; tps65218, palmas, tps65217 - Device Tree binding updates; tps65218, altera-a10sr - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc - Use MFD API instead of of_platform_populate(); tps65218 - Generalise name-space; pm8xxx - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x - Enable compile testing; max77620, max77686, exynos-lpass, abx500-core - Coding style issues; wm8994-core, wm5102-tables - Supply endian support; syscon - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core Bug Fixes: - Fix ordering issues; wm8994 - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc - Fix compiler warnings; sun4i-gpadc - Fix leaks; mfd-core - Fix page fault during module unload; tps65217" * tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) mfd: tps65217: Support an interrupt pin as the system wakeup mfd: tps65217: Make an interrupt handler simpler mfd: tps65217: Update register interrupt mask bits instead of writing operation mfd: tps65217: Specify the IRQ name mfd: tps65217: Fix page fault on unloading modules mfd: palmas: Remove redundant check in palmas_power_off mfd: arizona: Disable IRQs during driver remove mfd: pm8xxx: add support to pm8821 mfd: intel-lpss: Try to enable Memory-Write-Invalidate mfd: rn5t618: Add Ricoh RC5T619 PMIC support mfd: axp20x: Add address extension registers for AXP806 regmap mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE() mfd: core: Fix device reference leak in mfd_clone_cell mfd: bcm590xx: Simplify a test mfd: sun4i-gpadc: Select regmap-irq mfd: abx500-core: drop unused MODULE_ tags from non-modular code mfd: ab8500: make sysctrl explicitly non-modular mfd: ab8500-gpadc: Make it explicitly non-modular mfd: ab8500-debugfs: Make it explicitly non-modular mfd: ab8500-core: Make it explicitly non-modular ...
2016-12-18Merge tag 'platform-drivers-x86-v4.10-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull more x86 platform driver updates from Darren Hart: "Move and add registration for the mlx-platform driver. Introduce button and lid drivers for the surface3 (different from the surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing ideapad-laptop quirk. Summary: ideapad-laptop: - Add Y700 15-ACZ to no_hw_rfkill DMI list surface3_button: - Introduce button support for the Surface 3 surface3-wmi: - Add custom surface3 platform device for controlling LID - Balance locking on error path mlx-platform: - Add mlxcpld-hotplug driver registration - Fix semicolon.cocci warnings - Move module from arch/x86 platform/x86: - Add Whiskey Cove PMIC TMU support" * tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: surface3-wmi: Balance locking on error path platform/x86: Add Whiskey Cove PMIC TMU support platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list platform/x86: Introduce button support for the Surface 3 platform/x86: Add custom surface3 platform device for controlling LID platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration platform/x86: mlx-platform: Fix semicolon.cocci warnings platform/x86: mlx-platform: Move module from arch/x86
2016-12-18platform/x86: Add Whiskey Cove PMIC TMU supportNilesh Bacchewar
This adds TMU (Time Management Unit) support for Intel BXT platform. It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove PMIC. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [andy: resolve merge conflict in Kconfig] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-15Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc, or that just came a little too late given their size. The zx fixes make the platform finally boot on real hardware, the davinci and imx31 get the DT support working better for some of the machines that are still normally used with classic board files. One tegra fix is important for new bootloader versions, but the bug has been around for a while without anyone noticing. The other changes are mostly cosmetic" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: tegra: Add missing Smaug revision arm64: tegra: Add VDD_GPU regulator to Jetson TX1 arm64: dts: zte: clean up gic-v3 redistributor properties arm64: dts: zx: Fix gic GICR property bus: vexpress-config: fix device reference leak soc: ti: qmss: fix the case when !SMP ARM: lpc32xx: drop duplicate header device.h ARM: ixp4xx: drop duplicate header gpio.h ARM: socfpga: fix spelling mistake in error message ARM: dts: imx6q-cm-fx6: fix fec pinctrl ARM: dts: imx7d-pinfunc: fix UART pinmux defines ARM: dts: imx6qp: correct LDB clock inputs ARM: OMAP2+: pm-debug: Use seq_putc() in two functions ARM: OMAP2+: Remove the omapdss_early_init_of() function mfd: tps65217: Fix mismatched interrupt number ARM: zx: Fix error handling ARM: spear: Fix error handling ARM: davinci: da850: Fix pwm name matching ARM: clk: imx31: properly init clocks for machines with DT clk: imx31: fix rewritten input argument of mx31_clocks_init() ...
generated by cgit (git 2.34.1) at 2025-09-13 06:03:49 +0000