summaryrefslogtreecommitdiff
path: root/include/linux/mlx5/driver.h
AgeCommit message (Collapse)Author
2021-12-02net/mlx5: Dynamically resize flow counters query bufferAvihai Horon
The flow counters bulk query buffer is allocated once during mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little more than 512KB of memory, which is aligned to the next power of 2, to 1MB. For SFs, this buffer is reduced and takes around 128 Bytes. The buffer size determines the maximum number of flow counters that can be queried at a time. Thus, having a bigger buffer can improve performance for users that need to query many flow counters. There are cases that don't use many flow counters and don't need a big buffer (e.g. SFs, VFs). Since this size is critical with large scale, in these cases the buffer size should be reduced. In order to reduce memory consumption while maintaining query performance, change the query buffer's allocation scheme to the following: - First allocate the buffer with small initial size. - If the number of counters surpasses the initial size, resize the buffer to the maximum size. The buffer only grows and isn't shrank, because users with many flow counters don't care about the buffer size and we don't want to add resize overhead if the current number of counters drops. This solution is preferable to the current one, which is less accurate and only addresses SFs. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-27Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into net-next Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5: remove the recent devlink paramsJakub Kicinski
revert commit 46ae40b94d88 ("net/mlx5: Let user configure io_eq_size param") revert commit a6cb08daa3b4 ("net/mlx5: Let user configure event_eq_size param") revert commit 554604061979 ("net/mlx5: Let user configure max_macs param") The EQE parameters are applicable to more drivers, they should be configured via standard API, probably ethtool. Example of another driver needing something similar: https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/ The last param for "max_macs" is probably fine but the documentation is severely lacking. The meaning and implications for changing the param need to be stated. Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net/mlx5: Let user configure io_eq_size paramShay Drory
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Add periodic update of host time to firmwareAya Levin
Firmware logs its asserts also to non-volatile memory. In order to reduce drift between the NIC and the host, the driver sets the host epoch-time to the firmware every hour. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge brank 'mlx5_mkey' into rdma.git for-nextLeon Romanovsky
A small series to clean up the mlx5 mkey code across the mlx5_core and InfiniBand. * branch 'mlx5_mkey': RDMA/mlx5: Attach ndescs to mlx5_ib_mkey RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key RDMA/mlx5: Remove pd from struct mlx5_core_mkey RDMA/mlx5: Remove size from struct mlx5_core_mkey RDMA/mlx5: Remove iova from struct mlx5_core_mkey Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-20net/mlx5: Lag, change multipath and bonding to be mutually exclusiveMaor Dickman
Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-19RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ibAharon Landau
Move mlx5_core_mkey struct to mlx5_ib, as the mlx5_core doesn't use it at this point. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-19RDMA/mlx5: Replace struct mlx5_core_mkey by u32 keyAharon Landau
In mlx5_core and vdpa there is no use of mlx5_core_mkey members except for the key itself. As preparation for moving mlx5_core_mkey to mlx5_ib, the occurrences of struct mlx5_core_mkey in all modules except for mlx5_ib are replaced by a u32 key. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-19RDMA/mlx5: Remove pd from struct mlx5_core_mkeyAharon Landau
There is no read of mkey->pd, only write. Remove it. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-19RDMA/mlx5: Remove size from struct mlx5_core_mkeyAharon Landau
mkey->size is already stored in ibmr->length, no need to store it here. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-19RDMA/mlx5: Remove iova from struct mlx5_core_mkeyAharon Landau
iova is already stored in ibmr->iova, no need to store it here. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-10-15net/mlx5: Use native_port_num as 1st option of device indexRongwei Liu
Using "native_port_num" can support more NICs. Fallback to PCIe IDs if "native_port_num" query fails. Signed-off-by: Rongwei Liu <rongweil@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15net/mlx5: Introduce new device index wrapperRongwei Liu
Downstream patches. Signed-off-by: Rongwei Liu <rongweil@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15net/mlx5: Disable roce at HCA levelShay Drory
Currently, when a user disables roce via the devlink param, this change isn't passed down to the device. If device allows disabling RoCE at device level, make use of it. This instructs the device to skip memory allocations related to RoCE functionality which otherwise is done by the device. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15net/mlx5: Read timeout values from init segmentAmir Tzin
Replace hard coded timeouts with values stored in firmware's init segment. Timeouts are read from init segment during driver load. If init segment timeouts are not supported then fallback to hard coded defaults instead. Also move pre initialization timeouts which cannot be read from firmware to the new mechanism. Signed-off-by: Amir Tzin <amirtz@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15net/mlx5: Add layout to support default timeouts registerAmir Tzin
Add needed structures and defines for DTOR (default timeouts register). This will be used to get timeouts values from FW instead of hard coded values in the driver code thus enabling support for slower devices which need longer timeouts. Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-04net/mlx5: Shift control IRQ to the last indexShay Drory
Control IRQ is the first IRQ vector. This complicates handling of completion irqs as we need to offset them by one. in the next patch, there are scenarios where completion and control EQs will share the same irq. for example: functions with single IRQ. To ease such scenarios, we shift control IRQ to the end of the irq array. Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-28IB/mlx5: Enable UAR to have DevX UIDMeir Lichtinger
UID field was added to alloc_uar and dealloc_uar PRM command, to specify DevX UID for UAR. This change enables firmware validating user access to its own UAR resources. For the kernel allocated UARs the UID will stay 0 as of today. Signed-off-by: Meir Lichtinger <meirl@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11net/mlx5: Allocate individual capabilityParav Pandit
Currently mlx5_core_dev contains array of capabilities. It contains 19 valid capabilities of the device, 2 reserved entries and 12 holes. Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K bytes of memory which is never used. Due to this mlx5_core_dev structure size is 270Kbytes odd. This allocation further aligns to next power of 2 to 512Kbytes. By skipping non-existent entries, (a) 112Kbyte is saved, (b) mlx5_core_dev reduces to 8KB with alignment (c) 350KB saved in alignment In future individual capability allocation can be used to skip its allocation when such capability is disabled at the device level. This patch prepares mlx5_core_dev to hold capability using a pointer instead of inline array. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Reorganize current and maximal capabilities to be per-typeParav Pandit
In the current code, the current and maximal capabilities are maintained in separate arrays which are both per type. In order to allow the creation of such a basic structure as a dynamically allocated array, we move curr and max fields to a unified structure so that specific capabilities can be allocated as one unit. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Delete impossible dev->state checksLeon Romanovsky
New mlx5_core device structure is allocated through devlink_alloc with\ kzalloc and that ensures that all fields are equal to zero and it includes ->state too. That means that checks of that field in the mlx5_init_one() is completely redundant, because that function is called only once in the begging of mlx5_core_dev lifetime. PCI: .probe() -> probe_one() -> mlx5_init_one() The recovery flow can't run at that time or before it, because relevant work initialized later in mlx5_init_once(). Such initialization flow ensures that dev->state can't be MLX5_DEVICE_STATE_UNINITIALIZED at all, so remove such impossible checks. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Fix typo in commentsCai Huoqing
Fix typo: *vectores ==> vectors *realeased ==> released *erros ==> errors *namepsace ==> namespace *trafic ==> traffic *proccessed ==> processed *retore ==> restore *Currenlty ==> Currently *crated ==> created *chane ==> change *cannnot ==> cannot *usuallly ==> usually *failes ==> fails *importent ==> important *reenabled ==> re-enabled *alocation ==> allocation *recived ==> received *tanslation ==> translation Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-09net/mlx5: Synchronize correct IRQ when destroying CQShay Drory
The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Lag, add initial logic for shared FDBMark Bloch
As shared FDB requires changes in two subsystems first expose the needed core functions so the RDMA side can be changed. mlx5_lag_is_master(): return true if a given mlx5 device is the lag master. mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB. mlx5_lag_get_peer_mdev(): Return the peer mdev in lag. The mentioned functions will be used by downstream patches in order to add support for shared FDB for the RDMA side. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16net/mlx5e: Don't create devices during unload flowDmytro Linkin
Running devlink reload command for port in switchdev mode cause resources to corrupt: driver can't release allocated EQ and reclaim memory pages, because "rdma" auxiliary device had add CQs which blocks EQ from deletion. Erroneous sequence happens during reload-down phase, and is following: 1. detach device - suspends auxiliary devices which support it, destroys others. During this step "eth-rep" and "rdma-rep" are destroyed, "eth" - suspended. 2. disable SRIOV - moves device to legacy mode; as part of disablement - rescans drivers. This step adds "rdma" auxiliary device. 3. destroy EQ table - <failure>. Driver shouldn't create any device during unload flows. To handle that implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset on device attach. If flag is set do no-op on drivers rescan. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27Merge tag 'mlx5-updates-2021-05-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-05-26 Misc update for mlx5 driver, 1) Clean up patches for lag and SF 2) Reserve bit 31 in steering register C1 for IPSec offload usage 3) Move steering tables pool logic into the steering core and increase the maximum table size to 2G entries when software steering is enabled. * tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix lag port remapping logic net/mlx5: Use boolean arithmetic to evaluate roce_lag net/mlx5: Remove unnecessary spin lock protection net/mlx5: Cap the maximum flow group size to 16M entries net/mlx5: DR, Set max table size to 2G entries net/mlx5: Move chains ft pool to be used by all firmware steering net/mlx5: Move table size calculation to steering cmd layer net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE net/mlx5: DR, Remove unused field of send_ring struct net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload net/mlx5e: TC: Use bit counts for register mapping net/mlx5: CT: Avoid reusing modify header context for natted entries net/mlx5e: CT, Remove newline from ct_dbg call ==================== Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27net/mlx5: Move chains ft pool to be used by all firmware steeringPaul Blakey
Firmware FT pool is per device, but the software tracking of this pool only services fs_chains users, and if another layer takes a flow table, the pool will not be updated, and fs_chains will fail creating a flow table, with no recovery till the flow table is returned. Move FT pool to be global per device, and stored at the cmd level, so all layers can use it. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18{net, RDMA}/mlx5: Fix override of log_max_qp by other deviceMaor Gottlieb
mlx5_core_dev holds pointer to static profile, hence when the log_max_qp of the profile is override by some device, then it effect all other mlx5 devices that share the same profile. Fix it by having a profile instance for every mlx5 device. Fixes: 883371c453b9 ("net/mlx5: Check FW limitations on log_max_qp before setting it") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...
2021-04-16net/mlx5: Add register layout to support extended link stateMoshe Tal
Add needed structure layouts and defines for pddr register (Port Diagnostics Database Register) and the troublshooting page. This will be used to get extended link state from the monitor opcode bits. Signed-off-by: Moshe Tal <moshet@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-12Merge branch 'mlx5-next' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== This pr contains changes from mlx5-next branch, already reviewed on netdev and rdma mailing lists, links below. 1) From Leon, Dynamically assign MSI-X vectors count Already Acked by Bjorn Helgaas. https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/ 2) Cleanup series: https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/ From Mark, E-Switch cleanups and refactoring, and the addition of single FDB mode needed HW bits. From Mikhael, Remove unused struct field From Saeed, Cleanup W=1 prototype warning From Zheng, Esw related cleanup From Tariq, User order-0 page allocation for EQs ==================== * mlx5-next: net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks net/mlx5: Dynamically assign MSI-X vectors count net/mlx5: Add dynamic MSI-X capabilities bits PCI/IOV: Add sysfs MSI-X vector assignment interface net/mlx5: Use order-0 allocations for EQs net/mlx5: Add IFC bits needed for single FDB mode net/mlx5: E-Switch, Refactor send to vport to be more generic RDMA/mlx5: Use representor E-Switch when getting netdev and metadata net/mlx5: E-Switch, Add eswitch pointer to each representor net/mlx5: E-Switch, Add match on vhca id to default send rules net/mlx5: Remove unused mlx5_core_health member recover_work net/mlx5: simplify the return expression of mlx5_esw_offloads_pair() net/mlx5: Cleanup prototype warning Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-09Merge branch 'mlx5-next' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-next 2021-04-09 This pr contains changes from mlx5-next branch, already reviewed on netdev and rdma mailing lists, links below. 1) From Leon, Dynamically assign MSI-X vectors count Already Acked by Bjorn Helgaas. https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/ 2) Cleanup series: https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/ From Mark, E-Switch cleanups and refactoring, and the addition of single FDB mode needed HW bits. From Mikhael, Remove unused struct field From Saeed, Cleanup W=1 prototype warning From Zheng, Esw related cleanup From Tariq, User order-0 page allocation for EQs * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks net/mlx5: Dynamically assign MSI-X vectors count net/mlx5: Add dynamic MSI-X capabilities bits PCI/IOV: Add sysfs MSI-X vector assignment interface net/mlx5: Use order-0 allocations for EQs net/mlx5: Add IFC bits needed for single FDB mode net/mlx5: E-Switch, Refactor send to vport to be more generic RDMA/mlx5: Use representor E-Switch when getting netdev and metadata net/mlx5: E-Switch, Add eswitch pointer to each representor net/mlx5: E-Switch, Add match on vhca id to default send rules net/mlx5: Remove unused mlx5_core_health member recover_work net/mlx5: simplify the return expression of mlx5_esw_offloads_pair() net/mlx5: Cleanup prototype warning ==================== Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-02net/mlx5: Allocate rate limit table when rate is configuredParav Pandit
A device supports 128 rate limiters. A static table allocation consumes 8KB of memory even when rate is not configured. Instead, allocate the table when at least one rate is configured. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-02net/mlx5: Pack mlx5_rl_entry structureParav Pandit
mlx5_rl_entry structure is not properly packed as shown below. Due to this an array of size 9144 bytes allocated which is aligned to 16Kbytes. Hence, pack the structure and avoid the wastage. This offers 8Kbytes of saving per mlx5_core_dev struct. pahole -C mlx5_rl_entry drivers/net/ethernet/mellanox/mlx5/core/en_main.o Existing layout: struct mlx5_rl_entry { u8 rl_raw[48]; /* 0 48 */ u16 index; /* 48 2 */ /* XXX 6 bytes hole, try to pack */ u64 refcount; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u16 uid; /* 64 2 */ u8 dedicated:1; /* 66: 0 1 */ /* size: 72, cachelines: 2, members: 5 */ /* sum members: 60, holes: 1, sum holes: 6 */ /* sum bitfield members: 1 bits (0 bytes) */ /* padding: 5 */ /* bit_padding: 7 bits */ /* last cacheline: 8 bytes */ }; After alignment: struct mlx5_rl_entry { u8 rl_raw[48]; /* 0 48 */ u64 refcount; /* 48 8 */ u16 index; /* 56 2 */ u16 uid; /* 58 2 */ u8 dedicated:1; /* 60: 0 1 */ /* size: 64, cachelines: 1, members: 5 */ /* padding: 3 */ /* bit_padding: 7 bits */ }; Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-16net/mlx5e: Do not reload ethernet ports when changing eswitch modeRoi Dayan
When switching modes between legacy and switchdev and back, do not reload ethernet interfaces. just change the profile from nic profile to uplink rep profile in switchdev mode. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-16net/mlx5: Move devlink port from mlx5e priv to mlx5e resourcesRoi Dayan
We re-use the native NIC port net device instance for the Uplink representor, and the devlink port. When changing profiles we reset the mlx5e priv but we should still use the devlink port so move it to mlx5e resources. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-16net/mlx5: Move mlx5e hw resources into a sub objectRoi Dayan
This is to separate between resources attributes and other attributes we will want to use. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-12net/mlx5: Use order-0 allocations for EQsTariq Toukan
Currently we are allocating high-order page for EQs. In case of fragmented system, VF hot remove/add in VMs for example, there isn't enough contiguous memory for EQs allocation, which results in crashing of the VM. Therefore, use order-0 fragments for the EQ allocations instead. Performance tests: ConnectX-5 100Gbps, CPU: Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz Performance tests show no sensible degradation. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-12net/mlx5: Remove unused mlx5_core_health member recover_workMikhael Goikhman
The code related to health->recover_work was removed in commit 63cbc552eebf ("net/mlx5: Handle SW reset of FW in error flow") Fix struct mlx5_core_health accordingly. Signed-off-by: Mikhael Goikhman <migo@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-11RDMA/mlx5: Fix query RoCE portMaor Gottlieb
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it should be used only when driver is loaded. Instead we just need to read the roce_en field. In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled. Fixes: 7a58779edd75 ("IB/mlx5: Improve query port for representor port") Link: https://lore.kernel.org/r/20210304124517.1100608-2-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This is quite a small cycle, if not for Lee's 70 patches cleaning the kdocs it would be well below typical for patch count. Most of the interesting work here was in the HNS and rxe drivers which got fairly major internal changes. Summary: - Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa - Significant rework in rxe to get it ready to have XRC support added - Several rts bug fixes - Big series to get to 'make W=1' cleanness, primarily updating kdocs - Support for creating a RDMA MR from a DMABUF fd to allow PCI peer to peer transfers to GPU VRAM - Device disassociation now works properly with umad - Work to support more than 255 ports on a RDMA device - Further support for the new HNS HIP09 hardware - Coding style cleanups: comma to semicolon, unneded semicolon/blank lines, remove 'h' printk format, don't check for NULL before kfree, use true/false for bool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits) RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR() RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes RDMA/mlx5: Fail QP creation if the device can not support the CQE TS RDMA/mlx5: Allow CQ creation without attached EQs RDMA/rtrs-srv-sysfs: fix missing put_device RDMA/rtrs-srv: fix memory leak by missing kobject free RDMA/rtrs: Only allow addition of path to an already established session RDMA/rtrs-srv: Fix stack-out-of-bounds RDMA/rxe: Remove unused pkt->offset RDMA/ucma: Fix use-after-free bug in ucma_create_uevent RDMA/core: Fix kernel doc warnings for ib_port_immutable_read() RDMA/qedr: Use true and false for bool variable RDMA/hns: Adjust definition of FRMR fields RDMA/hns: Refactor process of posting CMDQ RDMA/hns: Adjust fields and variables about CMDQ tail/head RDMA/hns: Remove redundant operations on CMDQ RDMA/hns: Fixes missing error code of CMDQ RDMA/hns: Remove unused member and variable of CMDQ RDMA/ipoib: Remove racy Subnet Manager sendonly join checks RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver ...
2021-02-18Merge tag 'v5.11' into rdma.git for-nextJason Gunthorpe
Linux 5.11 Merged to resolve conflicts with RDMA rc commits - drivers/infiniband/sw/rxe/rxe_net.c The final logic is to call rxe_get_dev_from_net() again with the master netdev if the packet was rx'd on a vlan. To keep the elimination of the local variables requires a trivial edit to the code in -rc Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16Merge branch 'mlx5-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== pull-request: mlx5-next 2021-02-16 The patches in this pr are already submitted and reviewed through the netdev and rdma mailing lists. The series includes mlx5 HW bits and definitions for mlx5 real time clock translation and handling in the mlx5 driver clock module to enable and support such mode [1] [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210212223042.449816-7-saeed@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net/mlx5: Move all internal timer metadata into a dedicated structEran Ben Elisha
Internal timer mode (SW clock) requires some PTP clock related metadata structs. Real time mode (HW clock) will not need these metadata structs. This separation emphasize the different interfaces for HW clock and SW clock. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Add register layout to support real-time time-stampEran Ben Elisha
Add needed structure layouts and defines for MTUTC (Management UTC) register. MTUTC will be used for cyc2time HW translation. In addition, add cyc2time modify capability bit and init segment HCA real time address. Finally, add capability bits indicating which time-stamping format is supported per SQ and RQ. Add ts_format in the queue's context layout to allow configuration. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5: Delete device list leftoverLeon Romanovsky
Device list is not stored in mlx5_priv anymore, so delete it as it's not used. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-16 07:47:15 +0000