| Age | Commit message (Collapse) | Author |
|---|
|
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f5f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
|
|
With bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address
space qualifier") the normal compilers start caring about the __percpu
annotation, as such f67d1ffd841f ("perf/core: Detach 'struct
perf_cpu_pmu_context' and 'struct pmu' lifetimes") needs a fixup.
Fixes: f67d1ffd841f ("perf/core: Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes")
Fixes: bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address space qualifier")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: jirislaby@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The pmu specific data is saved in task_struct now. Remove it from event
context structure.
Remove swap_task_ctx() as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-7-kan.liang@linux.intel.com
|
|
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
|
|
The LBR call stack data has to be saved/restored during context switch
to fix the shorter LBRs call stacks issue in the system-wide mode.
Allocate PMU specific data and attach them to the corresponding
task_struct during LBR call stack monitoring.
When a LBR call stack event is accounted, the perf_ctx_data for the
related tasks will be allocated/attached by attach_perf_ctx_data().
When a LBR call stack event is unaccounted, the perf_ctx_data for
related tasks will be detached/freed by detach_perf_ctx_data().
The LBR call stack event could be a per-task event or a system-wide
event.
- For a per-task event, perf only allocates the perf_ctx_data for the
current task. If the allocation fails, perf will error out.
- For a system-wide event, perf has to allocate the perf_ctx_data for
both the existing tasks and the upcoming tasks.
The allocation for the existing tasks is done in perf_event_alloc().
If any allocation fails, perf will error out.
The allocation for the new tasks will be done in perf_event_fork().
A global reader/writer semaphore, global_ctx_data_rwsem, is added to
address the global race.
- The perf_ctx_data only be freed by the last LBR call stack event.
The number of the per-task events is tracked by refcount of each task.
Since the system-wide events impact all tasks, it's not practical to
go through the whole task list to update the refcount for each
system-wide event. The number of system-wide events is tracked by a
global variable global_ctx_data_ref.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-3-kan.liang@linux.intel.com
|
|
Some PMU specific data has to be saved/restored during context switch,
e.g. LBR call stack data. Currently, the data is saved in event context
structure, but only for per-process event. For system-wide event,
because of missing the LBR call stack data after context switch, LBR
callstacks are always shorter in comparison to per-process mode.
For example,
Per-process mode:
$perf record --call-graph lbr -- taskset -c 0 ./tchain_edit
- 99.90% 99.86% tchain_edit tchain_edit [.] f3
99.86% _start
__libc_start_main
generic_start_main
main
f1
- f2
f3
System-wide mode:
$perf record --call-graph lbr -a -- taskset -c 0 ./tchain_edit
- 99.88% 99.82% tchain_edit tchain_edit [.] f3
- 62.02% main
f1
f2
f3
- 28.83% f1
- f2
f3
- 28.83% f1
- f2
f3
- 8.88% generic_start_main
main
f1
f2
f3
It isn't practical to simply allocate the data for system-wide event in
CPU context structure for all tasks. We have no idea which CPU a task
will be scheduled to. The duplicated LBR data has to be maintained on
every CPU context structure. That's a huge waste. Otherwise, the LBR
data still lost if the task is scheduled to another CPU.
Save the pmu specific data in task_struct. The size of pmu specific data
is 788 bytes for LBR call stack. Usually, the overall amount of threads
doesn't exceed a few thousands. For 10K threads, keeping LBR data would
consume additional ~8MB. The additional space will only be allocated
during LBR call stack monitoring. It will be released when the
monitoring is finished.
Furthermore, moving task_ctx_data from perf_event_context to task_struct
can reduce complexity and make things clearer. E.g. perf doesn't need to
swap task_ctx_data on optimized context switch path.
This patch set is just the first step. There could be other
optimization/extension on top of this patch set. E.g. for cgroup
profiling, perf just needs to save/store the LBR call stack information
for tasks in specific cgroup. That could reduce the additional space.
Also, the LBR call stack can be available for software events, or allow
even debugging use cases, like LBRs on crash later.
Because of the alignment requirement of Intel Arch LBR, the Kmem cache
is used to allocate the PMU specific data. It's required when child task
allocates the space. Save it in struct perf_ctx_data.
The refcount in struct perf_ctx_data is used to track the users of pmu
specific data.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: https://lore.kernel.org/r/20250314172700.438923-1-kan.liang@linux.intel.com
|
|
The commit 97c79a38cd45 ("perf core: Per event callchain limit")
introduced a per-event term to allow finer tuning of the depth of
callchains to save space.
It should be applied to the branch stack as well. For example, autoFDO
collections require maximum LBR entries. In the meantime, other
system-wide LBR users may only be interested in the latest a few number
of LBRs. A per-event LBR depth would save the perf output buffer.
The patch simply drops the uninterested branches, but HW still collects
the maximum branches. There may be a model-specific optimization that
can reduce the HW depth for some cases to reduce the overhead further.
But it isn't included in the patch set. Because it's not useful for all
cases. For example, ARCH LBR can utilize the PEBS and XSAVE to collect
LBRs. The depth should have less impact on the collecting overhead.
The model-specific optimization may be implemented later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310181536.3645382-1-kan.liang@linux.intel.com
|
|
In prepration for being able to unregister a PMU with existing events,
it becomes important to detach struct perf_cpu_pmu_context lifetimes
from that of struct pmu.
Notably struct perf_cpu_pmu_context embeds a struct perf_event_pmu_context
that can stay referenced until the last event goes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.760214287@infradead.org
|
|
perf_cpu_pmu_context::pmu_disable_count
Because it makes no sense to have two per-cpu allocations per pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.518730578@infradead.org
|
|
The error cleanup sequence in perf_event_alloc() is a subset of the
existing _free_event() function (it must of course be).
Split this out into __free_event() and simplify the error path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135517.967889521@infradead.org
|
|
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Move ctl tables to two files:
- perf_event_{paranoid,mlock_kb,max_sample_rate} and
perf_cpu_time_max_percent into kernel/events/core.c
- perf_event_max_{stack,context_per_stack} into
kernel/events/callchain.c
Make static variables and functions that are fully contained in core.c
and callchain.cand remove them from include/linux/perf_event.h.
Additionally six_hundred_forty_kb is moved to callchain.c.
Two new sysctl tables are added ({callchain,events_core}_sysctl_table)
with their respective sysctl registration functions.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-5-cd3698ab8d29@kernel.org
|
|
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
|
|
While at it, rename the same function in s390 cpum_sf PMU.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20241203180441.1634709-2-namhyung@kernel.org
|
|
Check sample_type in perf_sample_save_brstack() to prevent
saving branch stack data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-4-yabinc@google.com
|
|
Check sample_type in perf_sample_save_callchain() to prevent
saving callchain data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-3-yabinc@google.com
|
|
Currently, space for raw sample data is always allocated within sample
records for both BPF output and tracepoint events. This leads to unused
space in sample records when raw sample data is not requested.
This patch enforces checking sample type of an event in
perf_sample_save_raw_data(). So raw sample data will only be saved if
explicitly requested, reducing overhead when it is not needed.
Fixes: 0a9081cf0a11 ("perf/core: Add perf_sample_save_raw_data() helper")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-2-yabinc@google.com
|
|
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
Hardware traces, such as instruction traces, can produce a vast amount of
trace data, so being able to reduce tracing to more specific circumstances
can be useful.
The ability to pause or resume tracing when another event happens, can do
that.
Add ability for an event to "pause" or "resume" AUX area tracing.
Add aux_pause bit to perf_event_attr to indicate that, if the event
happens, the associated AUX area tracing should be paused. Ditto
aux_resume. Do not allow aux_pause and aux_resume to be set together.
Add aux_start_paused bit to perf_event_attr to indicate to an AUX area
event that it should start in a "paused" state.
Add aux_paused to struct hw_perf_event for AUX area events to keep track of
the "paused" state. aux_paused is initialized to aux_start_paused.
Add PERF_EF_PAUSE and PERF_EF_RESUME modes for ->stop() and ->start()
callbacks. Call as needed, during __perf_event_output(). Add
aux_in_pause_resume to struct perf_buffer to prevent races with the NMI
handler. Pause/resume in NMI context will miss out if it coincides with
another pause/resume.
To use aux_pause or aux_resume, an event must be in a group with the AUX
area event as the group leader.
Example (requires Intel PT and tools patches also):
$ perf record --kcore -e intel_pt/aux-action=start-paused/k,syscalls:sys_enter_newuname/aux-action=resume/,syscalls:sys_exit_newuname/aux-action=pause/ uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.043 MB perf.data ]
$ perf script --call-trace
uname 30805 [000] 24001.058782799: name: 0x7ffc9c1865b0
uname 30805 [000] 24001.058784424: psb offs: 0
uname 30805 [000] 24001.058784424: cbr: 39 freq: 3904 MHz (139%)
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __x64_sys_newuname
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) down_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __cond_resched
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) up_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) _copy_to_user
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_to_user_mode
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_work
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) perf_syscall_exit
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_alloc
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_get_recursion_context
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_tp_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_update
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) tracing_gen_ctx_irq_test
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __perf_event_account_interrupt
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __this_cpu_preempt_check
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_output_forward
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_aux_pause
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) ring_buffer_get
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_lock
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_unlock
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) pt_event_stop
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785463: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785639: 0x0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-3-adrian.hunter@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
|
|
Usually, an event can be read from any CPU of the scope. It doesn't need
to be read from the advertised CPU.
Add a new event cap, PERF_EV_CAP_READ_SCOPE. An event of a PMU with
scope can be read from any active CPU in the scope.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-3-kan.liang@linux.intel.com
|
|
The perf subsystem assumes that the counters of a PMU are per-CPU. So
the user space tool reads a counter from each CPU in the system wide
mode. However, many PMUs don't have a per-CPU counter. The counter is
effective for a scope, e.g., a die or a socket. To address this, a
cpumask is exposed by the kernel driver to restrict to one CPU to stand
for a specific scope. In case the given CPU is removed,
the hotplug support has to be implemented for each such driver.
The codes to support the cpumask and hotplug are very similar.
- Expose a cpumask into sysfs
- Pickup another CPU in the same scope if the given CPU is removed.
- Invoke the perf_pmu_migrate_context() to migrate to a new CPU.
- In event init, always set the CPU in the cpumask to event->cpu
Similar duplicated codes are implemented for each such PMU driver. It
would be good to introduce a generic infrastructure to avoid such
duplication.
5 popular scopes are implemented here, core, die, cluster, pkg, and
the system-wide. The scope can be set when a PMU is registered. If so, a
"cpumask" is automatically exposed for the PMU.
The "cpumask" is from the perf_online_<scope>_mask, which is to track
the active CPU for each scope. They are set when the first CPU of the
scope is online via the generic perf hotplug support. When a
corresponding CPU is removed, the perf_online_<scope>_mask is updated
accordingly and the PMU will be moved to a new CPU from the same scope
if possible.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-2-kan.liang@linux.intel.com
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This change allows events to use PERF_SAMPLE_READ with inherit
so long as PERF_SAMPLE_TID is also set. This enables sample based
profiling of a group of counters over a hierarchy of processes or
threads. This is useful, for example, for collecting per-thread
counters/metrics, event based sampling of multiple counters as a unit,
access to the enabled and running time when using multiplexing and so
on.
Prior to this, users were restricted to either collecting aggregate
statistics for a multi-threaded/-process application (e.g. with
"perf stat"), or to sample individual threads, or to profile the entire
system (which requires root or CAP_PERFMON, and may produce much more
data than is required). Theoretically a tool could poll for or otherwise
monitor thread/process creation and construct whatever events the user
is interested in using perf_event_open, for each new thread or process,
but this is racy, can lead to file-descriptor exhaustion, and ultimately
just replicates the behaviour of inherit, but in userspace.
This configuration differs from inherit without PERF_SAMPLE_READ in that
the accumulated event count, and consequently any sample (such as if
triggered by overflow of sample_period) will be on a per-thread rather
than on an aggregate basis.
The meaning of read_format::value field of both PERF_RECORD_READ and
PERF_RECORD_SAMPLE is changed such that if the sampled event uses this
new configuration then the values reported will be per-thread rather
than the global aggregate value. This is a change from the existing
semantics of read_format (where PERF_SAMPLE_READ is used without
inherit), but it is necessary to expose the per-thread counter values,
and it avoids reinventing a separate "read_format_thread" field that
otherwise replicates the same behaviour. This change should not break
existing tools, since this configuration was not previously valid and
was rejected by the kernel. Tools that opt into this new mode will need
to account for this when calculating the counter delta for a given
sample. Tools that wish to have both the per-thread and aggregate value
can perform the global aggregation themselves from the per-thread
values.
The change to read_format::value does not affect existing valid
perf_event_attr configurations, nor does it change the behaviour of
calls to "read" on an event descriptor. Both continue to report the
aggregate value for the entire thread/process hierarchy. The difference
between the results reported by "read" and PERF_RECORD_SAMPLE in this
new configuration is justified on the basis that it is not (easily)
possible for "read" to target a specific thread (the caller only has
the fd for the original parent event).
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-3-ben.gainey@arm.com
|
|
nr_pending counts the number of events in the context that
either pending_sigtrap or pending_work, but it is used
to prevent taking the fast path in perf_event_context_sched_out.
Renamed to reflect what it is used for, rather than what it
counts. This change allows using the field to track other
event properties that also require skipping the fast path
without possible confusion over the name.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-2-ben.gainey@arm.com
|
|
Start a new section for AUX PMUs in hw_perf_event.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
perf_pending_irq() invokes perf_event_wakeup() and __perf_pending_irq().
The former is in charge of waking any tasks which waits to be woken up
while the latter disables perf-events.
The irq_work perf_pending_irq(), while this an irq_work, the callback
is invoked in thread context on PREEMPT_RT. This is needed because all
the waking functions (wake_up_all(), kill_fasync()) acquire sleep locks
which must not be used with disabled interrupts.
Disabling events, as done by __perf_pending_irq(), expects a hardirq
context and disabled interrupts. This requirement is not fulfilled on
PREEMPT_RT.
Split functionality based on perf_event::pending_disable into irq_work
named `pending_disable_irq' and invoke it in hardirq context on
PREEMPT_RT. Rename the split out callback to perf_pending_disable().
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-8-bigeasy@linutronix.de
|
|
The swevent_htable::recursion counter is used to avoid creating an
swevent while an event is processed to avoid recursion. The counter is
per-CPU and preemption must be disabled to have a stable counter.
perf_pending_task() disables preemption to access the counter and then
signal. This is problematic on PREEMPT_RT because sending a signal uses
a spinlock_t which must not be acquired in atomic on PREEMPT_RT because
it becomes a sleeping lock.
The atomic context can be avoided by moving the counter into the
task_struct. There is a 4 byte hole between futex_state (usually always
on) and the following perf pointer (perf_event_ctxp). After the
recursion lost some weight it fits perfectly.
Move swevent_htable::recursion into task_struct.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-6-bigeasy@linutronix.de
|
|
A signal is delivered by raising irq_work() which works from any context
including NMI. irq_work() can be delayed if the architecture does not
provide an interrupt vector. In order not to lose a signal, the signal
is injected via task_work during event_sched_out().
Instead going via irq_work, the signal could be added directly via
task_work. The signal is sent to current and can be enqueued on its
return path to userland.
Queue signal via task_work and consider possible NMI context. Remove
perf_event::pending_sigtrap and and use perf_event::pending_work
instead.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-4-bigeasy@linutronix.de
|
|
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org
|
|
This will allow it to be called from perf_output_wakeup().
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240413141618.4160-2-khuey@kylehuey.com
|
|
Now that struct perf_event's orig_overflow_handler is gone, there's no need
for the functions and macros to support looking past overflow_handler to
orig_overflow_handler.
This patch is solely a refactoring and results in no behavior change.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-6-khuey@kylehuey.com
|
|
To ultimately allow BPF programs attached to perf events to completely
suppress all of the effects of a perf event overflow (rather than just the
sample output, as they do today), call bpf_overflow_handler() from
__perf_event_overflow() directly rather than modifying struct perf_event's
overflow_handler. Return the BPF program's return value from
bpf_overflow_handler() so that __perf_event_overflow() knows how to
proceed. Remove the now unnecessary orig_overflow_handler from struct
perf_event.
This patch is solely a refactoring and results in no behavior change.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-5-khuey@kylehuey.com
|
|
This will allow __perf_event_overflow() (which is independent of
CONFIG_BPF_SYSCALL) to use struct perf_event's prog to decide whether to
call bpf_overflow_handler().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-4-khuey@kylehuey.com
|
|
It was unnecessarily disabling and enabling PMUs for each event. It
should be done at PMU level. Add pmu_ctx->nr_freq counter to check it
at each PMU. As PMU context has separate active lists for pinned group
and flexible group, factor out a new function to do the job.
Another minor optimization is that it can skip PMUs w/ CAP_NO_INTERRUPT
even if it needs to unthrottle sampling events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240207050545.2727923-1-namhyung@kernel.org
|
|
Avoid conflicts, base on fixes.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Audit of the refcounting turned up that perf_pmu_migrate_context()
fails to migrate the ctx refcount.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20230612093539.085862001@infradead.org
Cc: <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
- Add AMD Unified Memory Controller (UMC) events introduced with Zen 4
- Simplify & clean up the uncore management code
- Fall back from RDPMC to RDMSR on certain uncore PMUs
- Improve per-package and cstate event reading
- Extend the Intel ref-cycles event to GP counters
- Fix Intel MTL event constraints
- Improve the Intel hybrid CPU handling code
- Micro-optimize the RAPL code
- Optimize perf_cgroup_switch()
- Improve large AUX area error handling
- Misc fixes and cleanups
* tag 'perf-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86/amd/uncore: Pass through error code for initialization failures, instead of -ENODEV
perf/x86/amd/uncore: Fix uninitialized return value in amd_uncore_init()
x86/cpu: Fix the AMD Fam 17h, Fam 19h, Zen2 and Zen4 MSR enumerations
perf: Optimize perf_cgroup_switch()
perf/x86/amd/uncore: Add memory controller support
perf/x86/amd/uncore: Add group exclusivity
perf/x86/amd/uncore: Use rdmsr if rdpmc is unavailable
perf/x86/amd/uncore: Move discovery and registration
perf/x86/amd/uncore: Refactor uncore management
perf/core: Allow reading package events from perf_event_read_local
perf/x86/cstate: Allow reading the package statistics from local CPU
perf/x86/intel/pt: Fix kernel-doc comments
perf/x86/rapl: Annotate 'struct rapl_pmus' with __counted_by
perf/core: Rename perf_proc_update_handler() -> perf_event_max_sample_rate_handler(), for readability
perf/x86/rapl: Fix "Using plain integer as NULL pointer" Sparse warning
perf/x86/rapl: Use local64_try_cmpxchg in rapl_event_update()
perf/x86/rapl: Stop doing cpu_relax() in the local64_cmpxchg() loop in rapl_event_update()
perf/core: Bail out early if the request AUX area is out of bound
perf/x86/intel: Extend the ref-cycles event to GP counters
perf/x86/intel: Fix broken fixed event constraints extension
...
|
|
Add a helper function to check call stack sample type.
The later patch will invoke the function in several places.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-3-kan.liang@linux.intel.com
|
|
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
|
|
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353d5 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353d5 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
|
|
Namhyung reported that bd2756811766 ("perf: Rewrite core context handling")
regresses context switch overhead when perf-cgroup is in use together
with 'slow' PMUs like uncore.
Specifically, perf_cgroup_switch()'s perf_ctx_disable() /
ctx_sched_out() etc.. all iterate the full list of active PMUs for
that CPU, even if they don't have cgroup events.
Previously there was cgrp_cpuctx_list which linked the relevant PMUs
together, but that got lost in the rework. Instead of re-instruducing
a similar list, let the perf_event_pmu_context iteration skip those
that do not have cgroup events. This avoids growing multiple versions
of the perf_event_pmu_context iteration.
Measured performance (on a slightly different patch):
Before)
$ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 10000 pipe operations between two processes
Total time: 0.901 [sec]
90.128700 usecs/op
11095 ops/sec
After)
$ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 10000 pipe operations between two processes
Total time: 0.065 [sec]
6.560100 usecs/op
152436 ops/sec
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Debugged-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231009210425.GC6307@noisy.programming.kicks-ass.net
|
|
perf_event_max_sample_rate_handler(), for readability
Follow the naming pattern of the other sysctl handlers in perf.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230721090607.172002-1-xiujianfeng@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
|
|
Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.
Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:
# bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
Attaching 1 probe...
hit
hit
[...]
^C
(./test performs a single 4-byte store to 0x10000)
This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.
Signed-off-by: Tomislav Novak <tnovak@meta.com>
Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit c719f56092ad ("perf: Fix and clean up initialization of
pmu::event_idx"), event_idx default implementation has returned 0, not
idx + 1, so fix the comment that can be misleading.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
