| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
* tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Add ARCH_SOC_ID support
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
soc: ux500: Use custom soc attribute group instead of device_create_file
soc: ux500: Switch to use DEVICE_ATTR_RO()
soc: integrator: Use custom soc attribute group instead of device_create_file
soc: integrator: Switch to use DEVICE_ATTR_RO()
soc: realview: Use custom soc attribute group instead of device_create_file
soc: realview: Switch to use DEVICE_ATTR_RO()
Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add NXP pca9450 pmic driver.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/1593793178-9737-2-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add brackets to protect parameters of the recently added sg_table related
macros from side-effects.
Fixes: 709d6d73c756 ("scatterlist: add generic wrappers for iterating over sgtable objects")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a
SiP defined SoC identification value. Add support for the same.
Also using the SoC bus infrastructure, let us expose the platform
specific SoC atrributes under sysfs.
There are various ways in which it can be represented in shortened form
for efficiency and ease of parsing for userspace. The chosen form is
described in the ABI document.
Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Ping tested:
[ 11.808455] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 11.816497] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
[root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x4
[ 18.844591] mscc_felix 0000:00:00.5 swp0: Link is Down
[ 22.048337] mscc_felix 0000:00:00.5 swp0: Link is Up - 100Mbps/Half - flow control off
[root@LS1028ARDB ~] # ip addr add 192.168.1.1/24 dev swp0
[root@LS1028ARDB ~] # ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
(...)
^C--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.383/0.611/1.051 ms
[root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x10
[ 355.637747] mscc_felix 0000:00:00.5 swp0: Link is Down
[ 358.788034] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Half - flow control off
[root@LS1028ARDB ~] # ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
(...)
^C
--- 192.168.1.2 ping statistics ---
16 packets transmitted, 16 packets received, 0% packet loss
round-trip min/avg/max = 0.301/0.384/1.138 ms
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull in task_work changes from the 5.8 series, as we'll need to apply
the same kind of changes to other parts in the 5.9 branch.
* io_uring-5.8:
io_uring: fix regression with always ignoring signals in io_cqring_wait()
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Now that all architectures have been switched to use _do_fork() and the new
struct kernel_clone_args calling convention we can remove the legacy
do_fork() helper completely. The calling convention used to be brittle and
do_fork() didn't buy us anything. The only calling convention accepted
should be based on struct kernel_clone_args going forward. It's cleaner and
uniform.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Use struct pid instead of user space pid values that are prone to wrap
araound.
In addition track the entire thread group instead of just the first
thread that is started by exec. There are no multi-threaded user mode
drivers today but there is nothing preclucing user drivers from being
multi-threaded, so it is just a good idea to track the entire process.
Take a reference count on the tgid's in question to make it possible
to remove exit_umh in a future change.
As a struct pid is available directly use kill_pid_info.
The prior process signalling code was iffy in using a userspace pid
known to be in the initial pid namespace and then looking up it's task
in whatever the current pid namespace is. It worked only because
kernel threads always run in the initial pid namespace.
As the tgid is now refcounted verify the tgid is NULL at the start of
fork_usermode_driver to avoid the possibility of silent pid leaks.
v1: https://lkml.kernel.org/r/87mu4qdlv2.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/a70l4oy8.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-12-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now that the last callser has been removed remove this code from exec.
For anyone thinking of resurrecing do_execve_file please note that
the code was buggy in several fundamental ways.
- It did not ensure the file it was passed was read-only and that
deny_write_access had been called on it. Which subtlely breaks
invaniants in exec.
- The caller of do_execve_file was expected to hold and put a
reference to the file, but an extra reference for use by exec was
not taken so that when exec put it's reference to the file an
underflow occured on the file reference count.
- The point of the interface was so that a pathname did not need to
exist. Which breaks pathname based LSMs.
Tetsuo Handa originally reported these issues[1]. While it was clear
that deny_write_access was missing the fundamental incompatibility
with the passed in O_RDWR filehandle was not immediately recognized.
All of these issues were fixed by modifying the usermode driver code
to have a path, so it did not need this hack.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
[1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/
v1: https://lkml.kernel.org/r/871rm2f0hi.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87lfk54p0m.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-10-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
With the user mode driver code changed to not set subprocess_info.file
there are no more users of subproces_info.file. Remove this field
from struct subprocess_info and remove the only user in
call_usermodehelper_exec_async that would call do_execve_file instead
of do_execve if file was set.
v1: https://lkml.kernel.org/r/877dvuf0i7.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87r1tx4p2a.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-9-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Instead of loading a binary blob into a temporary file with
shmem_kernel_file_setup load a binary blob into a temporary tmpfs
filesystem. This means that the blob can be stored in an init section
and discared, and it means the binary blob will have a filename so can
be executed normally.
The only tricky thing about this code is that in the helper function
blob_to_mnt __fput_sync is used. That is because a file can not be
executed if it is still open for write, and the ordinary delayed close
for kernel threads does not happen soon enough, which causes the
following exec to fail. The function umd_load_blob is not called with
any locks so this should be safe.
Executing the blob normally winds up correcting several problems with
the user mode driver code discovered by Tetsuo Handa[1]. By passing
an ordinary filename into the exec, it is no longer necessary to
figure out how to turn a O_RDWR file descriptor into a properly
referende counted O_EXEC file descriptor that forbids all writes. For
path based LSMs there are no new special cases.
[1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/
v1: https://lkml.kernel.org/r/87d05mf0j9.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87wo3p4p35.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-8-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The only thing supplied in the cmdline today is the driver name so
rename the field to clarify the code.
As this value is always supplied stop trying to handle the case of
a NULL cmdline.
Additionally since we now have a name we can count on use the
driver_name any place where the code is looking for a name
of the binary.
v1: https://lkml.kernel.org/r/87imfef0k3.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87366d63os.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-7-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This structure is only used for user mode drivers so change
the prefix from umh to umd to make that clear.
v1: https://lkml.kernel.org/r/87o8p6f0kw.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/878sg563po.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-6-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This makes it clear which code is part of the core user mode
helper support and which code is needed to implement user mode
drivers.
This makes the kernel smaller for everyone who does not use a usermode
driver.
v1: https://lkml.kernel.org/r/87tuyyf0ln.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87imf963s6.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-5-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The only caller of call_usermodehelper_setup_file is fork_usermode_blob.
In fork_usermode_blob replace call_usermodehelper_setup_file with
call_usermodehelper_setup and delete fork_usermodehelper_setup_file.
For this to work the argv_free is moved from umh_clean_and_save_pid
to fork_usermode_blob.
v1: https://lkml.kernel.org/r/87zh8qf0mp.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87o8p163u1.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-4-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The pid in struct subprocess_info is only used by umh_clean_and_save_pid to
write the pid into umh_info.
Instead always capture the pid on struct umh_info in umh_pipe_setup, removing
code that is specific to user mode drivers from the common user path of
user mode helpers.
v1: https://lkml.kernel.org/r/87h7uygf9i.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/875zb97iix.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-1-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the omap1_camera.c was removed from soc_camera).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
That was put in place for sparc64, and blackfin also used it for some time;
sparc64 no longer uses those, and blackfin is dead.
As there are no more users, remove preflow handlers.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200703155645.29703-3-valentin.schneider@arm.com
|
|
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix a pcie_find_root_port() simplification that broke power management
because it didn't handle the edge case of finding the Root Port of a
Root Port itself (Mika Westerberg)""
* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Make pcie_find_root_port() work for Root Ports
|
|
If in the process of creating the underlay QP for an IPoIB interface
the user has set the address and specifically the 1st-3rd bytes
representing the QP number, use the requested QP number when creating
the underlay QP.
For a user to be able to request a QP number on QP creation, the MKEY_BY_NAME
NVCONFIG should be set. As mkey_by_name and qp_by_name are coupled in FW.
This requires driver to query the mkey_by_name max cap during initialization
and set the current cap if it was enabled in FW.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Pull block fixes from Jens Axboe:
- Use kvfree_sensitive() for the block keyslot free (Eric)
- Sync blk-mq debugfs flags (Hou)
- Memory leak fix in virtio-blk error path (Hou)
* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
virtio-blk: free vblk-vqs in error path of virtblk_probe()
block/keyslot-manager: use kvfree_sensitive()
blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
|
|
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
|
|
USB is a HOST/DEVICE protocol, as per the specification and all
documentation. Fix up terms that are not applicable to make things
match up with the terms used through the rest of the USB stack.
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20200701171555.3198836-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Extend Intel Stratix10 service layer driver to support new RSU DCMF
versions and max retry parameter.
DCMF = Decision Configuration Management Firmware. The max retry parameter
is the maximum times the images is allowed to reload itself before giving
up and starting RSU failover flow.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct the incorrect flag value for COMMAND_RECONFIG_FLAG_PARTIAL and
increase FPGA reconfig timeout values so that Intel service layer and
FPGA manager drivers can work with all versions of firmware.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Functions are declared 'extern' implicitly by the compiler. There's no
reason to prepend every prototype with it. Remove the 'extern' keyword
from all function declarations in linux/device.h.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200629065008.27620-4-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some SPI controllers (like spi-geni-qcom) setting the chip select
is a heavy operation. For instance on spi-geni-qcom, with the current
code, is was measured as taking upwards of 20 us. Even on SPI
controllers that aren't as heavy, setting the chip select is at least
something like a MMIO operation over some peripheral bus which isn't
as fast as a RAM access.
While it would be good to find ways to mitigate problems like this in
the drivers for those SPI controllers, it can also be noted that the
SPI framework could also help out. Specifically, in some situations,
we can see the SPI framework calling the driver's set_cs() with the
same parameter several times in a row. This is specifically observed
when looking at the way the Chrome OS EC SPI driver (cros_ec_spi)
works but other drivers likely trip it to some extent.
Let's solve this by caching the chip select state in the core and only
calling into the controller if there was a change. We check not only
the "enable" state but also the chip select mode (active high or
active low) since controllers may care about both the mode and the
enable flag in their callback.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200629164103.1.Ied8e8ad8bbb2df7f947e3bc5ea1c315e041785a2@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added 14 years ago in commit 73241ccca0f7 ("[PATCH] Collect more inode
information during syscall processing.") but never used however
needlessly churned no less than 10 times since. Remove the unused
__audit_inode* stubs in the !CONFIG_AUDITSYSCALL case.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A common pattern for using plain DEVICE_ATTR() instead of
DEVICE_ATTR_RO() and DEVICE_ATTR_RW() is for attributes that want to
limit read to only root. I.e. many users of DEVICE_ATTR() are
specifying 0400 or 0600 for permissions.
Given the expectation that CAP_SYS_ADMIN is needed to access these
sensitive attributes and an explicit helper with the _ADMIN_ identifier
for DEVICE_ATTR_ADMIN_{RO,RW}.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159312906372.1850128.11611897078988158727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make SCMI base protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-10-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI reset protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-9-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI sensor protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-8-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI perf protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-7-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI power protocol register with the notification core.
Link: https://lore.kernel.org/r/20200701155348.52864-6-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add the core SCMI notifications callbacks-registration support: allow
users to register their own callbacks against the desired events.
Whenever a registration request is issued against a still non existent
event, mark such request as pending for later processing, in order to
account for possible late initializations of SCMI Protocols associated
to loadable drivers.
Link: https://lore.kernel.org/r/20200701155348.52864-3-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add the core SCMI notifications protocol-registration support: allow
protocols to register their own set of supported events, during their
initialization phase. Notification core can track multiple platform
instances by their handles.
Link: https://lore.kernel.org/r/20200701155348.52864-2-cristian.marussi@arm.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Introduce helper bpf_get_task_stack(), which dumps stack trace of given
task. This is different to bpf_get_stack(), which gets stack track of
current task. One potential use case of bpf_get_task_stack() is to call
it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file.
bpf_get_task_stack() uses stack_trace_save_tsk() instead of
get_perf_callchain() for kernel stack. The benefit of this choice is that
stack_trace_save_tsk() doesn't require changes in arch/. The downside of
using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the
stack trace to unsigned long array. For 32-bit systems, we need to
translate it to u64 array.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com
|
|
Sanitize and expose get/put_callchain_entry(). This would be used by bpf
stack map.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-2-songliubraving@fb.com
|
|
Instead just iterate over the inodes for the block device superblock.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use bd_disk->queue instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can trivially calculate the block size from the inodes i_blkbits
variable. Use that instead of keeping two redundant copies of the
information in slightly different formats.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
