| Age | Commit message (Collapse) | Author |
|---|
|
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson <sadolfsson@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This parameter enables capturing region snapshot of the crspace
during critical errors. The default value of this parameter is
disabled, it can be enabled using devlink param commands.
It is possible to configure during runtime and also driver init.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Crdump allows the driver to create a snapshot of the FW PCI
crspace and health buffer during a critical FW issue.
In case of a FW command timeout, FW getting stuck or a non zero
value on the catastrophic buffer, a snapshot will be taken.
The snapshot is exposed using devlink, cr-space, fw-health
address regions are registered on init and snapshots are attached
once a new snapshot is collected by the driver.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Health buffer address is a 32 bit PCI address offset provided by
the FW. This offset is used for reading FW health debug data
located on the shared CR space. Cr space is accessible in both
driver and FW and allows for different queries and configurations.
Health buffer size is always 64B of readable data followed by a
lock which is used to block volatile CR space access.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fixes1.2018.07.12b: Post-gp_seq miscellaneous fixes
torture1.2018.07.12b: Post-gp_seq torture-test updates
|
|
Currently, the rcu_torture_timer() function uses a single global
torture_random_state structure protected by a single global lock.
This conflicts to some extent with performance and scalability,
but even more with the goal of consolidating read-side testing
with rcu_torture_reader(). This commit therefore creates a per-CPU
torture_random_state structure for use by rcu_torture_timer() and
eliminates the lock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Make rcu_torture_timer_rand static, per 0day Test Robot report. ]
|
|
Unfortunately the patch for adding list_for_each_entry_from_rcu()
wasn't the final patch after all review. It is functionally
correct but the documentation was incomplete.
This patch adds this missing documentation which includes an update to
the documentation for list_for_each_entry_continue_rcu() to match the
documentation for the new list_for_each_entry_from_rcu(), and adds
list_for_each_entry_from_rcu() and the already existing
hlist_for_each_entry_from_rcu() to section 7 of whatisRCU.txt.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The naming and comments associated with some RCU-tasks code make
the faulty assumption that context switches due to cond_resched()
are voluntary. As several people pointed out, this is not the case.
This commit therefore updates function names and comments to better
reflect current reality.
Reported-by: Byungchul Park <byungchul.park@lge.com>
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The code example at rcupdate.h currently produce lots of warnings:
./include/linux/rcupdate.h:572: WARNING: Unexpected indentation.
./include/linux/rcupdate.h:576: WARNING: Unexpected indentation.
./include/linux/rcupdate.h:580: WARNING: Block quote ends without a blank line; unexpected unindent.
./include/linux/rcupdate.h:582: WARNING: Block quote ends without a blank line; unexpected unindent.
./include/linux/rcupdate.h:582: WARNING: Inline literal start-string without end-string.
This commit therefore changes it to a code-block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
We expect a quiescent state of TASKS_RCU when cond_resched_tasks_rcu_qs()
is called, no matter whether it actually be scheduled or not. However,
it currently doesn't report the quiescent state when the task enters
into __schedule() as it's called with preempt = true. So make it report
the quiescent state unconditionally when cond_resched_tasks_rcu_qs() is
called.
And in TINY_RCU, even though the quiescent state of rcu_bh also should
be reported when the tick interrupt comes from user, it doesn't. So make
it reported.
Lastly in TREE_RCU, rcu_note_voluntary_context_switch() should be
reported when the tick interrupt comes from not only user but also idle,
as an extended quiescent state.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Simplify rcutiny portion given no RCU-tasks for !PREEMPT. ]
|
|
Because rcu_read_unlock_special() is no longer used outside of
kernel/rcu/tree_plugin.h, this commit makes it static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The pfmemalloc flag indicates that the skb was allocated from
the PFMEMALLOC reserves, and the flag is currently copied on skb
copy and clone.
However, an skb copied from an skb flagged with pfmemalloc
wasn't necessarily allocated from PFMEMALLOC reserves, and on
the other hand an skb allocated that way might be copied from an
skb that wasn't.
So we should not copy the flag on skb copy, and rather decide
whether to allow an skb to be associated with sockets unrelated
to page reclaim depending only on how it was allocated.
Move the pfmemalloc flag before headers_start[0] using an
existing 1-bit hole, so that __copy_skb_header() doesn't copy
it.
When cloning, we'll now take care of this flag explicitly,
contravening to the warning comment of __skb_clone().
While at it, restore the newline usage introduced by commit
b19372273164 ("net: reorganize sk_buff for faster
__copy_skb_header()") to visually separate bytes used in
bitfields after headers_start[0], that was gone after commit
a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage
area"), and describe the pfmemalloc flag in the kernel-doc
structure comment.
This doesn't change the size of sk_buff or cacheline boundaries,
but consolidates the 15 bits hole before tc_index into a 2 bytes
hole before csum, that could now be filled more easily.
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
The i2c_lock_adapter name is ambiguous since it is unclear if it
refers to the root adapter or the adapter you name in the argument.
The natural interpretation is the adapter you name in the argument,
but there are historical reasons for that not being the case; it
in fact locks the root adapter. Just remove the function and force
users to spell out the I2C_LOCK_ROOT_ADAPTER name to indicate what
is really going on. Also remove i2c_unlock_adapter, of course.
This patch was generated with
git grep -l 'i2c_\(un\)\?lock_adapter' \
| xargs sed -i 's/i2c_\(un\)\?lock_adapter(\([^)]*\))/'\
'i2c_\1lock_bus(\2, I2C_LOCK_ROOT_ADAPTER)/g'
followed by white-space touch-up.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Using get_seconds() for timestamps is deprecated since it can lead
to overflows on 32-bit systems. While the interface generally doesn't
overflow until year 2106, the specific implementation of the TCP PAWS
algorithm breaks in 2038 when the intermediate signed 32-bit timestamps
overflow.
A related problem is that the local timestamps in CLOCK_REALTIME form
lead to unexpected behavior when settimeofday is called to set the system
clock backwards or forwards by more than 24 days.
While the first problem could be solved by using an overflow-safe method
of comparing the timestamps, a nicer solution is to use a monotonic
clocksource with ktime_get_seconds() that simply doesn't overflow (at
least not until 136 years after boot) and that doesn't change during
settimeofday().
To make 32-bit and 64-bit architectures behave the same way here, and
also save a few bytes in the tcp_options_received structure, I'm changing
the type to a 32-bit integer, which is now safe on all architectures.
Finally, the ts_recent_stamp field also (confusingly) gets used to store
a jiffies value in tcp_synq_overflow()/tcp_synq_no_recent_overflow().
This is currently safe, but changing the type to 32-bit requires
some small changes there to keep it working.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'srcu.2018.06.25b' and 'torture.2018.06.25b' into HEAD
expedited.2018.07.12a: Expedited grace-period updates.
fixes.2018.07.12a: Pre-gp_seq miscellaneous fixes.
srcu.2018.06.25b: SRCU updates.
torture.2018.06.25b: Pre-gp_seq torture-test updates.
|
|
https://git.linaro.org/people/john.stultz/linux into timers/core
Pull timekeeping updates from John Stultz:
- Make the timekeeping update more precise when NTP frequency is set
directly by updating the multiplier.
- Adjust selftests
|
|
Using ktime_to_ns() is nice to help backports to stable kernels.
Having a typesafe function instead of a macro avoid stupid typos
and waste of time tracking these typos.
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180711181641.10369-1-edumazet@google.com
|
|
open a file by given inode, faking ->f_path. Use with shitloads
of caution - at the very least you'd damn better make sure that
some dentry alias of that inode is pinned down by the path in
question. Again, this is no general-purpose interface and I hope
it will eventually go away. Right now overlayfs wants something
like that, but nothing else should.
Any out-of-tree code with bright idea of using this one *will*
eventually get hurt, with zero notice and great delight on my part.
I refuse to use EXPORT_SYMBOL_GPL(), especially in situations when
it's really EXPORT_SYMBOL_DONT_USE_IT(), but don't take that export
as "you are welcome to use it".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some drivers could call serial8250_do_set_divisor() to complete its
own set_divisor routine. Export this symbol for code reusing.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add these two hooks so that they can be overridden with driver specific
implementations.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
alloc_file_clone(old_file, mode, ops): create a new struct file with
->f_path equal to that of old_file. pipe converted.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
takes inode, vfsmount, name, O_... flags and file_operations and
either returns a new struct file (in which case inode reference we
held is consumed) or returns ERR_PTR(), in which case no refcounts
are altered.
converted aio_private_file() and sock_alloc_file() to it
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no users left
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
now it can be done...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
'opened' argument of finish_open() is unused. Kill it.
Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
|
|
just check ->f_mode in ima_appraise_measurement()
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...
Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just check FMODE_OPENED in __fput() and be done with that...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
basically, "is that instance set up enough for regular fput(), or
do we want put_filp() for that one".
NOTE: the only alloc_file() caller that could be followed by put_filp()
is in arch/ia64/kernel/perfmon.c, which is (Kconfig-level) broken.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... so that it could set both ->f_flags and ->f_mode, without callers
having to set ->f_flags manually.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Using this helper allows us to avoid the in-kernel calls to the
compat_sys_{f,}statfs64() sycalls, as are necessary for parameter
mangling in arm64's compat handling.
Following the example of ksys_* functions, kcompat_sys_* functions are
intended to be a drop-in replacement for their compat_sys_*
counterparts, with the same calling convention.
This is necessary to enable conversion of arm64's syscall handling to
use pt_regs wrappers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Using this helper allows us to avoid the in-kernel call to the
sys_personality() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_personality().
Since ksys_personality is trivial, it is implemented directly in
<linux/syscalls.h>, as we do for ksys_close() and friends.
This helper is necessary to enable conversion of arm64's syscall
handling to use pt_regs wrappers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
LAG devices (team or bond) recognize for each one of their slave devices
whether LAG traffic is going to be sent through that device. Bond calls
such devices "active", team calls them "txable". When this state
changes, a NETDEV_CHANGELOWERSTATE notification is distributed, together
with a netdev_notifier_changelowerstate_info structure that for LAG
devices includes a tx_enabled flag that refers to the new state. The
notification thus makes it possible to react to the changes in txability
in drivers.
However there's no way to query txability from the outside on demand.
That is problematic namely for mlxsw, which when resolving ERSPAN packet
path, may encounter a LAG device, and needs to determine which of the
slaves it should choose.
To that end, introduce a new function, net_lag_port_dev_txable(), which
determines whether a given slave device is "active" or
"txable" (depending on the flavor of the LAG device). That function then
dispatches to per-LAG-flavor helpers, bond_is_active_slave_dev() resp.
team_port_dev_txable().
Because there currently is no good place where net_lag_port_dev_txable()
should be added, introduce a new header file, lag.h, which should from
now on hold any logic common to both team and bond. (But keep
netif_is_lag_master() together with the rest of netif_is_*_master()
functions).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A follow-up patch adds a new entry point, team_port_dev_txable(). Making
it an ordinary exported function would mean that any module that may
need the service in one of the supported configurations also
unconditionally needs to pull in the team module, whether or not the
user actually intends to create team interfaces.
To prevent that, team_port_dev_txable() is defined in if_team.h, and
therefore all dependencies of that function also need to be
publicly-visible.
Therefore move team_port_get_rcu() from team.c to if_team.h.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
L2 Fwd Offload & 10GbE Intel Driver Updates 2018-07-09
This patch series is meant to allow support for the L2 forward offload, aka
MACVLAN offload without the need for using ndo_select_queue.
The existing solution currently requires that we use ndo_select_queue in
the transmit path if we want to associate specific Tx queues with a given
MACVLAN interface. In order to get away from this we need to repurpose the
tc_to_txq array and XPS pointer for the MACVLAN interface and use those as
a means of accessing the queues on the lower device. As a result we cannot
offload a device that is configured as multiqueue, however it doesn't
really make sense to configure a macvlan interfaced as being multiqueue
anyway since it doesn't really have a qdisc of its own in the first place.
The big changes in this set are:
Allow lower device to update tc_to_txq and XPS map of offloaded MACVLAN
Disable XPS for single queue devices
Replace accel_priv with sb_dev in ndo_select_queue
Add sb_dev parameter to fallback function for ndo_select_queue
Consolidated ndo_select_queue functions that appeared to be duplicates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After already supporting a simple implementation of buffered writes for
the blocksize == PAGE_SIZE case in the last commit this adds full support
even for smaller block sizes. There are three bits of per-block
information in the buffer_head structure that really matter for the iomap
read and write path:
- uptodate status (BH_uptodate)
- marked as currently under read I/O (BH_Async_Read)
- marked as currently under write I/O (BH_Async_Write)
Instead of having new per-block structures this now adds a per-page
structure called struct iomap_page to track this information in a slightly
different form:
- a bitmap for the per-block uptodate status. For worst case of a 64k
page size system this bitmap needs to contain 128 bits. For the
typical 4k page size case it only needs 8 bits, although we still
need a full unsigned long due to the way the atomic bitmap API works.
- two atomic_t counters are used to track the outstanding read and write
counts
There is quite a bit of boilerplate code as the buffered I/O path uses
various helper methods, but the actual code is very straight forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
- Jens's patches to expand the usable command depth from 31 to 32 broke
sata_fsl due to a subtle command iteration bug. Fixed by introducing
explicit iteration helpers and using the correct variant.
- On some laptops, enabling LPM by default reportedly led to occasional
hard hangs. Blacklist the affected cases.
- Other misc fixes / changes.
* 'for-4.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: Remove depends on HAS_DMA in case of platform dependency
ata: Fix ZBC_OUT all bit handling
ata: Fix ZBC_OUT command block check
ahci: Add Intel Ice Lake LP PCI ID
ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS
sata_nv: remove redundant pointers sdev0 and sdev1
sata_fsl: remove dead code in tag retrieval
sata_fsl: convert to command iterator
libata: convert eh to command iterators
libata: add command iterator helpers
ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static
libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
|
|
ata_sff_data_xfer_noirq() is invoked via the ->sff_data_xfer hook. The
latter is invoked by ata_pio_sector(), atapi_send_cdb() and
__atapi_pio_bytes() which in turn is invoked by ata_sff_hsm_move().
The latter function requires that the "ap->lock" lock is held which
needs to be taken with disabled interrupts.
There is no need have to have ata_sff_data_xfer_noirq() which invokes
ata_sff_data_xfer32() with disabled interrupts because at this point the
interrupts are already disabled.
Remove the function and its references to it and replace all callers
with ata_sff_data_xfer32().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few char/misc driver fixes for 4.18-rc5.
The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
caused breakages for some people. Thanks to Xiubo Li for fixing them
quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
where Rafael is offering to help out with reviewing driver core
patches.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us
thunderbolt: Notify userspace when boot_acl is changed
uio: fix crash after the device is unregistered
uio: change to use the mutex lock instead of the spin lock
uio: use request_threaded_irq instead
fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()'
ibmasm: don't write out of bounds in read handler
MAINTAINERS: Add myself as driver core changes reviewer
mei: discard messages from not connected client during power down.
vmw_balloon: fix inflation with batching
|
|
Once a new slave device is detected, match it against all sub-nodes of the
master bus controller. If a match is found, set the slave device's of_node
pointer.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Failure of ->open() should *not* be followed by fput(). Fixed by
using filp_clone_open(), which gets the cleanups right.
Cc: stable@vger.kernel.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's exactly the same thing as
dentry_open(&file->f_path, file->f_flags, file->f_cred)
... and rename it to file_clone_open(), while we are at it.
'filp' naming convention is bogus; sure, it's "file pointer",
but we generally don't do that kind of Hungarian notation.
Some of the instances have too many callers to touch, but this
one has only two, so let's sanitize it while we can...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This adds a global netfilter function to extract a conntrack tuple from an
skb. The function uses a new function added to nf_ct_hook, which will try
to get the tuple from skb->_nfct, and do a full lookup if that fails. This
makes it possible to use the lookup function before the skb has passed
through the conntrack init hooks (e.g., in an ingress qdisc). The tuple is
copied to the caller to avoid issues with reference counting.
The function returns false if conntrack is not loaded, allowing it to be
used without incurring a module dependency on conntrack. This is used by
the NAT mode in sch_cake.
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The target core runs into a warning in the linux/sbitmap.h
file in some configurations:
In file included from include/target/target_core_base.h:7,
from drivers/target/target_core_fabric_lib.c:41:
include/linux/sbitmap.h:331:46: error: 'struct seq_file' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
void sbitmap_show(struct sbitmap *sb, struct seq_file *m);
^~~~~~~~
In general, headers should not depend on others being included first,
so this fixes it with a forward declaration for that struct name, but
we probably want to merge the patch through the scsi tree to help
bisection.
Fixes: 10e9cbb6b531 ("scsi: target: Convert target drivers to use sbitmap")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Each PMU has a set of 32bit event counters. But in some
special cases, the events could be counted using counters
which are effectively 64bit wide.
e.g, Arm V8 PMUv3 has a 64 bit cycle counter which can count
only the CPU cycles. Also, the PMU can chain the event counters
to effectively count as a 64bit counter.
Add support for tracking the events that uses 64bit counters.
This only affects the periods set for each counter in the core
driver.
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
