| Age | Commit message (Collapse) | Author |
|---|
|
Support for configuring TRISTATE parameter is added in ZYNQMP PMUFW(Xilinx
ZynqMP Platform Management Firmware) Configuration Param Set version 2.0.
If the requested configuration is TRISTATE and platform is ZYNQMP then
check the version before requesting Xilinx firmware to set the
configuration.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230731095026.3766675-3-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add function to get family code and sub family code from the idcode. This
family code and sub family code helps to identify the platform.
Family code of any platform is on bits 21 to 27 and Sub family code is on
bits 19 and 20.
Signed-off-by: Dhaval Shah <dhaval.r.shah@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230731095026.3766675-2-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
icsk->icsk_user_timeout can be set locklessly,
if all read sides use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit f7f497cb7024 ("jbd2: kill t_handle_lock
transaction spinlock"), this lock has been no use.
Fixes: f7f497cb7024 ("jbd2: kill t_handle_lock transaction spinlock")
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/tencent_8477CBE568348A1862C64E393D587B342008@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In some randconfig builds, kernfs ends up being disabled, so there is no prototype
for kernfs_generic_poll()
In file included from kernel/sched/build_utility.c:97:
kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
kernfs_generic_poll(t->of, wait);
^
Add a stub helper for it, as we have it for other kernfs functions.
Fixes: aff037078ecae ("sched/psi: use kernfs polling functions for PSI trigger polling")
Fixes: 147e1a97c4a0b ("fs: kernfs: add poll file operation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230724121823.1357562-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620183141.681353-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev_err_probe() belongs to the printing API, hence
move the definition from device.h to dev_printk.h.
There is no change to the callers at all, since:
1) implementation is located in the same core.c;
2) dev_printk.h is guaranteed to be included by device.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230721131309.16821-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct kobject' from 256 to 244 bytes.
This structure is often included in some other structures. So these other
structures will also benefit from this 8 bytes saving.
This is especially nice for structure like 'cma_kobject' or 'class_dir'
that are now 256 bytes long. When they are kzalloc()'ed, 256 bytes are
allocated, instead of 512.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6c7d1e3005dbec5483bdb9b7b60071175bf7bf70.1688811201.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Duplicate a NULL-terminated string and replace all occurrences of
the old character with a new one. In other words, provide functionality
of kstrdup() + strreplace().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230804143910.15504-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The COMMON_CLK config is not enabled in some of the architectures.
This causes below build issues:
pwm-rz-mtu3.c:(.text+0x114):
undefined reference to `clk_rate_exclusive_put'
pwm-rz-mtu3.c:(.text+0x32c):
undefined reference to `clk_rate_exclusive_get'
Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK
code block, as clk.c is enabled by COMMON_CLK.
Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix a bug in a python script for Hyper-V (Ani Sinha)
- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)
- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
Sengar)
- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
ZhiHu)
* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
x86/hyperv: add noop functions to x86_init mpparse functions
vmbus_testing: fix wrong python syntax for integer value comparison
x86/hyperv: fix a warning in mshyperv.h
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a sparse warning triggered by the TPMI interface recently added to
the Intel RAPL power capping driver (Zhang Rui)"
* tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix a sparse warning in TPMI interface
|
|
Fix inconsistent return types in two implementations of bpf_xdp_copy_buf().
There are two implementations: one is an empty implementation whose return
type does not match the actual implementation.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230804005101.1534505-1-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Raw NAND fixes:
- fsl_upm: Fix an off-by one test in fun_exec_op()
- Rockchip:
- Align hwecc vs. raw page helper layouts
- Fix oobfree offset and description
- Meson: Fix OOB available bytes for ECC
- Omap ELM: Fix incorrect type in assignment
SPI-NOR fix:
- Avoid holes in struct spi_mem_op
Hyperbus fix:
- Add Tudor as reviewer in MAINTAINERS
SPI-NAND fixes:
- Winbond and Toshiba: Fix ecc_get_status"
* tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()
mtd: spi-nor: avoid holes in struct spi_mem_op
MAINTAINERS: Add myself as reviewer for HYPERBUS
mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts
mtd: rawnand: rockchip: fix oobfree offset and description
mtd: rawnand: meson: fix OOB available bytes for ECC
mtd: rawnand: omap_elm: Fix incorrect type in assignment
mtd: spinand: winbond: Fix ecc_get_status
mtd: spinand: toshiba: Fix ecc_get_status
|
|
There's no reason the generic platform bus code needs to call
of_platform_register_reconfig_notifier(). The notifier can be setup
before the platform bus is. Let's move it into of_core_init() which is
called just before platform_bus_init() instead to keep more of the DT
bits in the DT code.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230717143718.1715773-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.
Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add generic mailbox command that can support SDM command. User can use this
command to send SDM mailbox command. User have to specified an input file
which contain the command data and an output file for SDM response to be
copied over.
Signed-off-by: Teh Wen Ping <wen.ping.teh@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727192907.982070-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As with most ops structs, we never modify it at runtime, and keeping
function pointers in read-only memory is generally a good thing
security-wise.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20230327224315.11135-1-zev@bewilderbeest.net
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230623142805.577612-1-iwona.winiarska@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Printing the line number without the file is of limited usefulness.
Knowing the filename also makes it also easier to relate the logged
information to the controlfile.
Example:
# modprobe test_dynamic_debug
# echo 'file test_dynamic_debug.c =pfsl' > /proc/dynamic_debug/control
# echo 1 > /sys/module/test_dynamic_debug/parameters/do_prints
# dmesg | tail -2
[ 71.802212] do_cats:lib/test_dynamic_debug.c:103: test_dd: doing categories
[ 71.802227] do_levels:lib/test_dynamic_debug.c:123: test_dd: doing levels
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230709-dyndbg-filename-v2-3-fd83beef0925@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
linux/fs_uart_pd.h is not used anymore. Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f2cb444fa2b5776c9c51b5e46ea85edab62d1524.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add part ID to common include file
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
vlan_insert_tag() and friends do not allocate a new skb.
However they might allocate a new skb->head.
Update their comments to better describe their behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently MHI loads the firmware image from the path provided by client
devices. ath11k needs to support firmware image embedded along with meta
data (named as firmware-2.bin). So allow the client driver to request the
firmware file from user space on it's own and provide the firmware image
data and size to MHI via a pointer struct mhi_controller::fw_data.
This is an optional feature, if fw_data is NULL MHI load the firmware using
the name from struct mhi_controller::fw_image string as before.
Tested with ath11k and WCN6855 hw2.0.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230727100430.3603551-2-kvalo@kernel.org
[mani: wrapped commit message to 75 columns]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c
9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink")
a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/
net/xdp/xsk.c
3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
37b61cda9c16 ("bnxt: don't handle XDP in netpoll")
2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector")
fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c
55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest")
ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
module_init_layout_section() choses whether the core module loader
considers a section as init or not. This affects the placement of the
exit section when module unloading is disabled. This code will never run,
so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying
relocations based on the section name. The init PLTs are stored separately
so they can be free()d. arm and arm64 both use within_module_init() to
decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading
is disabled, both architecture would need to take this into account when
counting the PLTs.
Today neither architecture does this, meaning when module unloading is
disabled there are insufficient PLTs in the init section to load some
modules, resulting in warnings:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
xdp.h is far more specific and is included in only 67 other
files vs netdevice.h's 1538 include sites.
Make xdp.h include netdevice.h, instead of the other way around.
This decreases the incremental allmodconfig builds size when
xdp.h is touched from 5947 to 662 objects.
Move bpf_prog_run_xdp() to xdp.h, seems appropriate and filter.h
is a mega-header in its own right so it's nice to avoid xdp.h
getting included there as well.
The only unfortunate part is that the typedef for xdp_features_t
has to move to netdevice.h, since its embedded in struct netdevice.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-4-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
struct netdev_rx_queue is touched in only a few places
and having it defined in netdevice.h brings in the dependency
on xdp.h, because struct xdp_rxq_info gets embedded in
struct netdev_rx_queue.
In prep for removal of xdp.h from netdevice.h move all
the netdev_rx_queue stuff to a new header.
We could technically break the new header up to avoid
the sysfs.h include but it's so rarely included it
doesn't seem to be worth it at this point.
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-3-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Since commit 50a0cb565246 ("x86/efi-bgrt: Fix kernel panic when mapping BGRT data")
this extern declaration is not used anymore.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit d5410ac7b0ba ("net:bonding:support balance-alb interface with
vlan to bridge") introduced a support for balance-alb mode for
interfaces connected to the linux bridge by fixing missing matching of
MAC entry in FDB. In our testing we discovered that it still does not
work when the bond is connected to the OVS bridge as show in diagram
below:
eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac)
|
bond0.150(mac:eth0_mac)
|
ovs_bridge(ip:bridge_ip,mac:eth0_mac)
This patch fixes it by checking not only if the device is a bridge but
also if it is an openvswitch.
Signed-off-by: Mateusz Kowalski <mko@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/9fe7297c-609e-208b-c77b-3ceef6eb51a4@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
drivers
It is desirable that the new .ndo_hwtstamp_set() API gives more
uniformity, less overhead and future flexibility w.r.t. the PHY
timestamping behavior.
Currently there are some drivers which allow PHY timestamping through
the procedure mentioned in Documentation/networking/timestamping.rst.
They don't do anything locally if phy_has_hwtstamp() is set, except for
lan966x which installs PTP packet traps.
Centralize that behavior in a new dev_set_hwtstamp_phylib() code
function, which calls either phy_mii_ioctl() for the phylib PHY,
or .ndo_hwtstamp_set() of the netdev, based on a single policy
(currently simplistic: phy_has_hwtstamp()).
Any driver converted to .ndo_hwtstamp_set() will automatically opt into
the centralized phylib timestamping policy. Unconverted drivers still
get to choose whether they let the PHY handle timestamping or not.
Netdev drivers with integrated PHY drivers that don't use phylib
presumably don't set dev->phydev, and those will always see
HWTSTAMP_SOURCE_NETDEV requests even when converted. The timestamping
policy will remain 100% up to them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl()
for hardware timestamping purposes. This is not directly possible,
because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB.
Do something similar to what was done in DSA in commit 5a17818682cf
("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"),
and arrange some indirect calls to phy_mii_ioctl() through a stub
structure containing function pointers, that's provided by phylib as
built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at
runtime (module insertion).
Note: maybe the ownership of the ethtool_phy_ops singleton is backwards,
and the methods exposed by that should be later merged into phylib_stubs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stackable net devices with hwtstamping support (vlan, macvlan,
bonding) only pass the hwtstamping ops to the lower (real) device.
These drivers are the first that need to be converted to the new
timestamping API, because if they aren't prepared to handle that,
then no real device driver cannot be converted to the new API either.
After studying what vlan_dev_ioctl(), macvlan_eth_ioctl() and
bond_eth_ioctl() have in common, here we propose two generic
implementations of ndo_hwtstamp_get() and ndo_hwtstamp_set() which
can be called by those 3 drivers, with "dev" being their lower device.
These helpers cover both cases, when the lower driver is converted to
the new API or unconverted.
We need some hacks in case of an unconverted driver, namely to stuff
some pointers in struct kernel_hwtstamp_config which shouldn't have
been there (since the new API isn't supposed to need it). These will
be removed when all drivers will have been converted to the new API.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current hardware timestamping API for NICs requires implementing
.ndo_eth_ioctl() for SIOCGHWTSTAMP and SIOCSHWTSTAMP.
That API has some boilerplate such as request parameter translation
between user and kernel address spaces, handling possible translation
failures correctly, etc. Since it is the same all across the board, it
would be desirable to handle it through generic code.
Here we introduce .ndo_hwtstamp_get() and .ndo_hwtstamp_set(), which
implement that boilerplate and allow drivers to just act upon requests.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For IPsec packet offload mode, the order of TC offload and IPsec
offload on the same netdevice is not aligned with the order in the
non-offload software. For example, for RX, the software performs TC
first and then IPsec transformation, but the implementation for
offload does that in the opposite way.
To resolve the difference for now, either IPsec offload or TC offload,
not both, is allowed for a specific interface.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/8e2e5e3b0984d785066e8663aaf97b3ba1bb873f.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IPsec encryption is done at the last, so add new prio for IPsec
offload in FDB, and put it just lower than the slow path prio and
higher than the per-vport prio.
Three levels are added for TX. The first one is for ip xfrm policy.
The sa table is created in the second level for ip xfrm state. The
status table is created at the last to count the number of packets
encrypted.
The rules, which forward packets to uplink, are changed to forward
them to IPsec TX tables first. These rules are restored after those
tables are destroyed, which is done immediately when there is no
reference to them, just as what does in legacy mode. The support for
slow path is added here, by refreshing uplink's channels. But, the
handling for TC fast path, which is more complicated, will be added
later. Besides, reg c4 is used instead to match reqid.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/cfd0e6ffaf0b8c55ebaa9fb0649b7c504b6b8ec6.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reuse tun opts bits in reg c1, to pass IPsec obj id to datapath.
As this is only for RX SA and there are only 11 bits, xarray is used
to map IPsec obj id to an index, which is between 1 and 0x7ff, and
replace obj id to write to reg c1.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/43d60fbcc9cd672a97d7e2a2f7fe6a3d9e9a776d.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As decryption must be done first, add new prio for IPsec offload in
FDB, and put it just lower than BYPASS prio and higher than TC prio.
Three levels are added for RX. The first one is for ip xfrm policy. SA
table is created in the second level for ip xfrm state. The status
table is created in the last to check the decryption result. If
success, packets continue with the next process, or dropped otherwise.
For now, the set of reg c1 is removed for swtichdev mode, and the
datapath process will be added in the next patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/c91063554cf643fb50b99cf093e8a9bf11729de5.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:
- SoCFPGA: Fix incorrect I2C property for SCL signal
- Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
RZ/V2L.
- Juno/Vexpress: remove a dangling symlink
- at91: sam9x60 SoC detection compatible strings
- nspire: Fix arm primecell compatible string
On the NXP i.MX platform, there multiple issues that get addressed:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable
disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
bus_power_dev child, so that runtime PM can translate into the
necessary GPC power domain action
On the driver side, there are two fixes for tegra memory controller
drivers addressing regressions from the merge window, a couple of
minor correctness fixes for SCMI and SMCCC firmware, as well as a
build fix for an lcd backlight driver"
* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
backlight: corgi_lcd: fix missing prototype
memory: tegra: make icc_set_bw return zero if BWMGR not supported
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
ARM: dts: at91: sam9x60: fix the SOC detection
ARM: dts: nspire: Fix arm primecell compatible string
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
...
|
|
Pull bitmap fixes from Yury Norov:
- Fix for bitmap documentation
- Fix for kernel build under certain configurations
* tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux:
lib/bitmap: workaround const_eval test build failure
cpumask: eliminate kernel-doc warnings
|
|
Since commit 30fbee49b071 ("Staging: hv: vmbus: Get rid of the unused function vmbus_ontimer()")
this is not used anymore, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230725142108.27280-1-yuehaibing@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The comment around VM_SHADOW_STACK in mm.h refers to a lot of x86
specific details that don't belong in a cross arch file. Remove these
out of core mm, and just leave the non-arch details.
Since the comment includes some useful details that would be good to
retain in the source somewhere, put the arch specifics parts in
arch/x86/shstk.c near alloc_shstk(), where memory of this type is
allocated. Include a reference to the existence of the x86 details near
the VM_SHADOW_STACK definition mm.h.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/20230706233248.445713-1-rick.p.edgecombe%40intel.com
|
|
Applications and loaders can have logic to decide whether to enable
shadow stack. They usually don't report whether shadow stack has been
enabled or not, so there is no way to verify whether an application
actually is protected by shadow stack.
Add two lines in /proc/$PID/status to report enabled and locked features.
Since, this involves referring to arch specific defines in asm/prctl.h,
implement an arch breakout to emit the feature lines.
[Switched to CET, added to commit log]
Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-37-rick.p.edgecombe%40intel.com
|
|
When operating with shadow stacks enabled, the kernel will automatically
allocate shadow stacks for new threads, however in some cases userspace
will need additional shadow stacks. The main example of this is the
ucontext family of functions, which require userspace allocating and
pivoting to userspace managed stacks.
Unlike most other user memory permissions, shadow stacks need to be
provisioned with special data in order to be useful. They need to be setup
with a restore token so that userspace can pivot to them via the RSTORSSP
instruction. But, the security design of shadow stacks is that they
should not be written to except in limited circumstances. This presents a
problem for userspace, as to how userspace can provision this special
data, without allowing for the shadow stack to be generally writable.
Previously, a new PROT_SHADOW_STACK was attempted, which could be
mprotect()ed from RW permissions after the data was provisioned. This was
found to not be secure enough, as other threads could write to the
shadow stack during the writable window.
The kernel can use a special instruction, WRUSS, to write directly to
userspace shadow stacks. So the solution can be that memory can be mapped
as shadow stack permissions from the beginning (never generally writable
in userspace), and the kernel itself can write the restore token.
First, a new madvise() flag was explored, which could operate on the
PROT_SHADOW_STACK memory. This had a couple of downsides:
1. Extra checks were needed in mprotect() to prevent writable memory from
ever becoming PROT_SHADOW_STACK.
2. Extra checks/vma state were needed in the new madvise() to prevent
restore tokens being written into the middle of pre-used shadow stacks.
It is ideal to prevent restore tokens being added at arbitrary
locations, so the check was to make sure the shadow stack had never been
written to.
3. It stood out from the rest of the madvise flags, as more of direct
action than a hint at future desired behavior.
So rather than repurpose two existing syscalls (mmap, madvise) that don't
quite fit, just implement a new map_shadow_stack syscall to allow
userspace to map and setup new shadow stacks in one step. While ucontext
is the primary motivator, userspace may have other unforeseen reasons to
setup its own shadow stacks using the WRSS instruction. Towards this
provide a flag so that stacks can be optionally setup securely for the
common case of ucontext without enabling WRSS. Or potentially have the
kernel set up the shadow stack in some new way.
The following example demonstrates how to create a new shadow stack with
map_shadow_stack:
void *shstk = map_shadow_stack(addr, stack_size, SHADOW_STACK_SET_TOKEN);
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-35-rick.p.edgecombe%40intel.com
|
|
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
block_page_mkwrite_return is neither block nor mkwrite specific, and
should not be under CONFIG_BLOCK. Move it to mm.h and rename it to
vmf_fs_error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prohibit probing on the compiler generated CFI typeid checking code
because it is used for decoding typeid when CFI error happens.
The compiler generates the following instruction sequence for indirect
call checks on x86;
movl -<id>, %r10d ; 6 bytes
addl -4(%reg), %r10d ; 4 bytes
je .Ltmp1 ; 2 bytes
ud2 ; <- regs->ip
And handle_cfi_failure() decodes these instructions (movl and addl)
for the typeid and the target address. Thus if we put a kprobe on
those instructions, the decode will fail and report a wrong typeid
and target address.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/168904025785.116016.12766408611437534723.stgit@devnote2
|
|
Now that all libata drivers have migrated to use the error_handler
callback, remove the deprecated phy_reset and eng_timeout callbacks.
Also remove references to non-existent functions sata_phy_reset and
ata_qc_timeout from Documentation/driver-api/libata.rst.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
