| Age | Commit message (Collapse) | Author |
|---|
|
Per page request event, FW request to allocated or release pages for a
single function. Driver maintains FW pages object per function, so there
is no need to hold one global page data-base. Instead, have a page
data-base per function, which will improve performance release flow in all
cases, especially for "release all pages".
As the range of function IDs is large and not sequential, use xarray to
store a per function ID page data-base, where the function ID is the key.
Upon first allocation of a page to a function ID, create the page
data-base per function. This data-base will be released only at pagealloc
mechanism cleanup.
NIC: ConnectX-4 Lx
CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
Test case: 32 VFs, measure release pages on one VF as part of FLR
Before: 0.021 Sec
After: 0.014 Sec
The improvement depends on amount of VFs and memory utilization
by them. Time measurements above were taken from idle system.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently lockdep_types.h includes list.h without actually using any
of its macros or functions. All it needs are the type definitions
which were moved into types.h long ago. This potentially causes
inclusion loops because both are included by many core header
files.
This patch moves the list.h inclusion into lockdep.h. Note that
we could probably remove it completely but that could potentially
result in compile failures should any end users not include list.h
directly and also be unlucky enough to not get list.h via some other
header file.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
|
|
The glue layer may need to know current available role to do some
setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role
for that.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
Provide DIV_S64_ROUND_CLOSEST helper which uses div_s64 to perform
division rounded to the closest integer using signed 64bit
dividend and signed 32bit divisor.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Change the comment typo: "direcly" -> "directly".
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/AAcAXwBTDSpsKN-5iyIOtaqk.1.1595857191899.Hmail.wenhu.wang@vivo.com
|
|
The method handle_event() grew a lot of complexity due to the design of
fanotify and merging of ignore masks.
Most backends do not care about this complex functionality, so we can hide
this complexity from them.
Introduce a method handle_inode_event() that serves those backends and
passes a single inode mark and less arguments.
This change converts all backends except fanotify and inotify to use the
simplified handle_inode_event() method. In pricipal, inotify could have
also used the new method, but that would require passing more arguments
on the simple helper (data, data_type, cookie), so we leave it with the
handle_event() method.
Link: https://lore.kernel.org/r/20200722125849.17418-9-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Introduce a new fanotify_init() flag FAN_REPORT_NAME. It requires the
flag FAN_REPORT_DIR_FID and there is a constant for setting both flags
named FAN_REPORT_DFID_NAME.
For a group with flag FAN_REPORT_NAME, the parent fid and name are
reported for directory entry modification events (create/detete/move)
and for events on non-directory objects.
Events on directories themselves are reported with their own fid and
"." as the name.
The parent fid and name are reported with an info record of type
FAN_EVENT_INFO_TYPE_DFID_NAME, similar to the way that parent fid is
reported with into type FAN_EVENT_INFO_TYPE_DFID, but with an appended
null terminated name string.
Link: https://lore.kernel.org/r/20200716084230.30611-21-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For now, the flag is mutually exclusive with FAN_REPORT_FID.
Events include a single info record of type FAN_EVENT_INFO_TYPE_DFID
with a directory file handle.
For now, events are only reported for:
- Directory modification events
- Events on children of a watching directory
- Events on directory objects
Soon, we will add support for reporting the parent directory fid
for events on non-directories with filesystem/mount mark and
support for reporting both parent directory fid and child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-19-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Remove the unneeded check for positive source dentry in
fsnotify_move().
fsnotify_move() hook is mostly called from vfs_rename() under
lock_rename() and vfs_rename() starts with may_delete() test that
verifies positive source dentry. The only other caller of
fsnotify_move() - debugfs_rename() also verifies positive source.
Link: https://lore.kernel.org/r/20200716084230.30611-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Similar to events "on child" to watching directory, send event
with parent/name info if sb/mount/non-dir marks are interested in
parent/name info.
The FS_EVENT_ON_CHILD flag can be set on sb/mount/non-dir marks to specify
interest in parent/name info for events on non-directory inodes.
Events on "orphan" children (disconnected dentries) are sent without
parent/name info.
Events on directories are sent with parent/name info only if the parent
directory is watching.
After this change, even groups that do not subscribe to events on
children could get an event with mark iterator type TYPE_CHILD and
without mark iterator type TYPE_INODE if fanotify has marks on the same
objects.
dnotify and inotify event handlers can already cope with that situation.
audit does not subscribe to events that are possible on child, so won't
get to this situation. nfsd does not access the marks iterator from its
event handler at the moment, so it is not affected.
This is a bit too fragile, so we should prepare all groups to cope with
mark type TYPE_CHILD preferably using a generic helper.
Link: https://lore.kernel.org/r/20200716084230.30611-16-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The arguments of fsnotify() are overloaded and mean different things
for different event types.
Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child. Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.
Document the new fsnotify() function argumenets.
Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Simple helper to consolidate biolerplate code.
Link: https://lore.kernel.org/r/20200722125849.17418-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The object type iterator is used to collect all the marks of
a specific group that have interest in an event.
It is used by fanotify to get a single handle_event callback
when an event has a match to either of inode/sb/mount marks
of the group.
The nature of fsnotify events is that they are associated with
at most one sb at most one mount and at most one inode.
When a parent and child are both watching, two events are sent
to backend, one associated to parent inode and one associated
to the child inode.
This results in duplicate events in fanotify, which usually
get merged before user reads them, but this is sub-optimal.
It would be better if the same event is sent to backend with
an object type iterator that has both the child inode and its
parent, and let the backend decide if the event should be reported
once (fanotify) or twice (inotify).
Link: https://lore.kernel.org/r/20200716084230.30611-9-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
As preparation for new flags that report fids, define a bit set
of flags for a group reporting fids, currently containing the
only bit FAN_REPORT_FID.
Link: https://lore.kernel.org/r/20200716084230.30611-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
It was never enabled in uapi and its functionality is about to be
superseded by events FAN_CREATE, FAN_DELETE, FAN_MOVE with group
flag FAN_REPORT_NAME.
Keep a place holder variable name_event instead of removing the
name recording code since it will be used by the new events.
Link: https://lore.kernel.org/r/20200708111156.24659-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Define the VFS inode flags using bit numbers instead of hardcoding
powers of 2, which has become unwieldy now that we're up to 65536.
No change in the actual values.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no callers left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
not used anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no instances left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->regset_get() takes task+regset+buffer, returns the amount of free space
left in the buffer on success and -E... on error.
buffer is represented as struct membuf - a pair of (kernel) pointer
and amount of space left
Primitives for writing to such:
* membuf_write(buf, data, size)
* membuf_zero(buf, size)
* membuf_store(buf, value)
These are implemented as inlines (in case of membuf_store - a macro).
All writes are sequential; they become no-ops when there's no space
left. Return value of all primitives is the amount of space left
after the operation, so they can be used as return values of ->regset_get().
Example of use:
// stores pt_regs of task + 64 bytes worth of zeroes + 32bit PID of task
int foo_get(struct task_struct *task, const struct regset *regset,
struct membuf to)
{
membuf_write(&to, task_pt_regs(task), sizeof(struct pt_regs));
membuf_zero(&to, 64);
return membuf_store(&to, (u32)task_tgid_vnr(task));
}
regset_get()/regset_get_alloc() taught to use that thing if present.
By the end of the series all users of ->get() will be converted;
then ->get() and ->get_size() can go.
Note that unlike ->get() this thing always starts at offset 0 and,
since it only writes to kernel buffer, can't fail on copyout.
It can, of course, fail for other reasons, but those tend to
be less numerous.
The caller guarantees that the buffer size won't be bigger than
regset->n * regset->size. That simplifies life for quite a few
instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Turn copy_regset_to_user() into regset_get_alloc() + copy_to_user().
Now all ->get() calls have a kernel buffer as destination.
Note that we'd already eliminated the callers of copy_regset_to_user()
with non-zero offset; now that argument is simply unused.
Uninlined, while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only architecture where we might end up using both is arm,
and there we definitely don't want fdpic-related fields in
elf_prstatus - coredump layout of ELF binaries should not
depend upon having the kernel built with the support of ELF_FDPIC
ones. Just move the fdpic-modified variant into binfmt_elf_fdpic.c
(and call it elf_prstatus_fdpic there)
[name stolen from nico]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It's unusable from userland - it uses elf_gregset_t, which is not
provided by exported headers. glibc has it in sys/procfs.h, but
the same file defines struct elf_prstatus, so linux/elfcore.h can't
be included once sys/procfs.h has been pulled. Same goes for uclibc
and dietlibc simply doesn't have elf_gregset_t defined anywhere.
IOW, no userland source is including that thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two new helpers: given a process and regset, dump into a buffer.
regset_get() takes a buffer and size, regset_get_alloc() takes size
and allocates a buffer.
Return value in both cases is the amount of data actually dumped in
case of success or -E... on error.
In both cases the size is capped by regset->n * regset->size, so
->get() is called with offset 0 and size no more than what regset
expects.
binfmt_elf.c callers of ->get() are switched to using those; the other
caller (copy_regset_to_user()) will need some preparations to switch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All i2c_new_device-alike functions return ERR_PTR these days, but this
fallback function was missed.
Fixes: 2dea645ffc21 ("i2c: acpi: Return error pointers from i2c_acpi_new_device()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: changed from 'ENOSYS' to 'ENODEV']
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The 'inode' argument to handle_event(), sometimes referred to as
'to_tell' is somewhat obsolete.
It is a remnant from the times when a group could only have an inode mark
associated with an event.
We now pass an iter_info array to the callback, with all marks associated
with an event.
Most backends ignore this argument, with two exceptions:
1. dnotify uses it for sanity check that event is on directory
2. fanotify uses it to report fid of directory on directory entry
modification events
Remove the 'inode' argument and add a 'dir' argument.
The callback function signature is deliberately changed, because
the meaning of the argument has changed and the arguments have
been documented.
The 'dir' argument is set to when 'file_name' is specified and it is
referring to the directory that the 'file_name' entry belongs to.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add a macro for aligning down a pointer. This is useful to get an
aligned register address when a device allows only word access and
doesn't allow half word or byte access.
Link: https://lore.kernel.org/r/20200722110317.4744-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:
"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while
the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
IRQF_NOBALANCING.
Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
irq_setup_affinity() which returns early because IRQF_PERCPU and
IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.
Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...
Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
|
|
Up to ConnectX-7 UMR is not used when user passes relaxed ordering access
flag. ConnectX-7 supports setting relaxed ordering read/write mkey
attribute by UMR, indicated by new HCA capabilities.
With ConnectX-7 driver uses UMR when user set relaxed ordering access
flag, in contrast to previous silicon models. Specifically it includes
setting relvant flags of mkey context mask in UMR control segment, and
relaxed ordering write and read flags in UMR mkey context segment.
Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX
device data structures instead of using structure defined specifically for
mlx5_ib module.
Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Silence documentation build warnings by correcting kernel-doc comment
for spi_transfer struct.
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200725050242.279548-1-colton.w.lewis@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the host command number 0x012B conflicts with other EC host
command, add one to all regulator control related host command.
Also fix a wrong alignment on struct and sync the comment with the one
in ChromeOS EC codebase.
Fixes: dff08caf35ec ("platform/chrome: cros_ec: Add command for regulator control.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200724080358.619245-1-pihsun@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Modern Intel Mobile platforms support power limit4 (PL4), which is
the SoC package level maximum power limit (in Watts). It can be used
to preemptively limits potential SoC power to prevent power spikes
from tripping the power adapter and battery over-current protection.
This patch enables this feature by exposing package level peak power
capping control to userspace via RAPL sysfs interface. With this,
application like DTPF can modify PL4 power limit, the similar way
of other package power limit (PL1).
As this feature is not tested on previous generations, here it is
enabled only for the platform that has been verified to work,
for safety concerns.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, acpi.info is an invalid link to access ACPI specification,
the new valid link is https://uefi.org/specifications.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This way, when the dev_pm_ops instance is not referenced anywhere, it
will simply be dropped by the compiler without a warning.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This macro is analogous to the infamous of_match_ptr(). If CONFIG_PM
is enabled, this macro will resolve to its argument, otherwise to NULL.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
we need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This reverts commit 2d38dbf89a06d0f689daec9842c5d3295c49777f as it broke
the build in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2d38dbf89a06 ("test_firmware: Test platform fw loading on non-EFI systems")
Cc: stable@vger.kernel.org
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727165539.0e8797ab@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This should resolve the merge/build issues reported when trying to
create linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including device.h is too much for the dma-dw.h platform data header.
Replace it with the headers of which dma-dw.h is direct user.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200721130844.64162-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
IP core of the DW DMA controller may be synthesized with different
max burst length of the transfers per each channel. According to Synopsis
having the fixed maximum burst transactions length may provide some
performance gain. At the same time setting up the source and destination
multi size exceeding the max burst length limitation may cause a serious
problems. In our case the DMA transaction just hangs up. In order to fix
this lets introduce the max burst length platform config of the DW DMA
controller device and don't let the DMA channels configuration code
exceed the burst length hardware limitation.
Note the maximum burst length parameter can be detected either in runtime
from the DWC parameter registers or from the dedicated DT property.
Depending on the IP core configuration the maximum value can vary from
channel to channel so by overriding the channel slave max_burst capability
we make sure a DMA consumer will get the channel-specific max burst
length.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to the DW APB DMAC data book the minimum burst transaction
length is 1 and it's true for any version of the controller since
isn't parametrised in the coreAssembler so can't be changed at the
IP-core synthesis stage. The maximum burst transaction can vary from
channel to channel and from controller to controller depending on a
IP-core parameter the system engineer activated during the IP-core
synthesis. Let's initialise both min_burst and max_burst members of the
DMA controller descriptor with extreme values so the DMA clients could
use them to properly optimize the DMA requests. The channels and
controller-specific max_burst length initialization will be introduced
by the follow-up patches.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are DMA devices (like ours version of Synopsys DW DMAC) which have
DMA capabilities non-uniformly redistributed between the device channels.
In order to provide a way of exposing the channel-specific parameters to
the DMA engine consumers, we introduce a new DMA-device callback. In case
if provided it gets called from the dma_get_slave_caps() method and is
able to override the generic DMA-device capabilities.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some devices may lack the support of the hardware accelerated SG list
entries automatic walking through and execution. In this case a burden of
the SG list traversal and DMA engine re-initialization lies on the
DMA engine driver (normally implemented by using a DMA transfer completion
IRQ to recharge the DMA device with a next SG list entry). But such
solution may not be suitable for some DMA consumers. In particular SPI
devices need both Tx and Rx DMA channels work synchronously in order
to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for
some time while the Tx DMA channel works implicitly pulling data into the
Rx FIFO, the later will be eventually overflown, which will cause the data
loss. So if SG list entries aren't automatically fetched by the DMA
engine, but are one-by-one manually selected for execution in the
ISRs/deferred work/etc., such problem will eventually happen due to the
non-deterministic latencies of the service execution.
In order to let the DMA consumer know about the DMA device capabilities
regarding the hardware accelerated SG list traversal we introduce the
max_sg_burst capability. It is supposed to be initialized by the DMA engine
driver with 0 if there is no limitation of the number of SG entries
atomically executed and with non-zero value if there is such constraints,
so the upper limit is determined by the number set to the property.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some hardware aside from default 0/1 may have greater minimum burst
transactions length constraints. Here we introduce the DMA device
and slave capability, which if required can be initialized by the DMA
engine driver with the device-specific value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
