| Age | Commit message (Collapse) | Author |
|---|
|
Both AER and DPC RP PIO provide TLP Header Log registers (PCIe r6.1 secs
7.8.4 & 7.9.14) to convey error diagnostics but the struct is named after
AER as the struct aer_header_log_regs. Also, not all places that handle TLP
Header Log use the struct and the struct members are named individually.
Generalize the struct name and members, and use it consistently where TLP
Header Log is being handled so that a pcie_read_tlp_log() helper can be
easily added.
Link: https://lore.kernel.org/r/20240206135717.8565-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop ixgbe changes for now, tidy whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Similar to skb_unref(), add skb_data_unref() to save an expensive
atomic operation (and cache line dirtying) when last reference
on shinfo->dataref is released.
I saw this opportunity on hosts with RAW sockets accidentally
bound to UDP protocol, forcing an skb_clone() on all received packets.
These RAW sockets had their receive queue full, so all clone
packets were immediately dropped.
When UDP recvmsg() consumes later the original skb, skb_release_data()
is hitting atomic_sub_return() quite badly, because skb->clone
has been set permanently.
Note that this patch helps TCP TX performance, because
TCP stack also use (fast) clones.
This means that at least one of the two packets (the main skb or
its clone) will no longer have to perform this atomic operation
in skb_release_data().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240307123446.2302230-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When enabling CONFIG_OF on a platform where 'of_root' is not populated
by firmware, we end up without a root node. In order to apply overlays
and create subnodes of the root node, we need one. Create this root node
by unflattening an empty builtin dtb.
If firmware provides a flattened device tree (FDT) then the FDT is
unflattened via setup_arch(). Otherwise, the call to
unflatten(_and_copy)?_device_tree() will create an empty root node.
We make of_have_populated_dt() return true only if the DTB was loaded by
firmware so that existing callers don't change behavior after this
patch. The call in the of platform code is removed because it prevents
overlays from creating platform devices when the empty root node is
used.
[sboyd@kernel.org: Update of_have_populated_dt() to treat this empty dtb
as not populated. Drop setup_of() initcall]
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230317053415.2254616-2-frowand.list@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-3-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We only use the flag for this purpose, so rename it accordingly. This
further prevents various other use cases of it, keeping it clean and
consistent. Then we can also check it in one spot, when it's being
attempted recycled, and remove some dead code in io_kbuf_recycle_ring().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rtc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-abelloni-v1-1-944c026137c8@marliere.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'x86/amd' and 'core' into next
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_rx_weight is read from process_backlog().
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_tx_weight is used in tx fast path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptype_all is used in rx/tx fast paths.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.
In this first patch, move :
- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
Subsequent patches introduce bpf_arena that imposes special alignment
requirements on address selection.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-4-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow the callers to set fwnode link flags when adding fwnode links.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct fwnode_operations defines one of the callback to return
enum dev_dma_attr. But this currently is defined in property.h.
Move it to the correct location.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A few APIs, i.e. fwnode_is_ancestor_of(), fwnode_get_next_parent_dev(),
and get_dev_from_fwnode(), that belong specifically to the fw_devlink APIs,
may be static, but they are not.
Resolve this mess by moving them to the driver/base/core where the all
users are being resided and make static.
No functional changes intended.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do not use 'extern' keyword with functions. Remove the last one
mistakenly added to fwnode.h.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Define cleanup handler using facilities from linux/cleanup.h to simplify
error handling in code using firmware loader. This will allow writing code
like this:
int driver_update_firmware(...)
{
const struct firmware *fw_entry __free(firmware) = NULL;
int error;
...
error = request_firmware(&fw_entry, fw_name, dev);
if (error) {
dev_err(dev, "failed to request firmware %s: %d",
fw_name, error);
return error;
}
error = check_firmware_valid(fw_entry);
if (error)
return error;
guard(mutex)(&instance->lock);
error = use_firmware(instance, fw);
if (error)
return error;
return 0;
}
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Luis Chamberalin <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/ZaeQw7VXhnirX4pQ@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a UIO memtype specifically for sharing dma_alloc_coherent
memory with userspace, backed by dma_mmap_coherent.
This is mainly for the bnx2/bnx2x/bnx2i "cnic" interface, although there
are a few other uio drivers which map dma_alloc_coherent memory and will
be converted to use dma_mmap_coherent as well.
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240205200137.138302-1-cleech@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.
In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices
Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.
Co-developed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Co-developed-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions below are only used within the context of
drivers/greybus/core.c, so move them all into core and drop their 'inline'
specifiers:
is_gb_host_device(), is_gb_module(), is_gb_interface(), is_gb_control(),
is_gb_bundle() and is_gb_svc().
Suggested-by: Alex Elder <elder@ieee.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240226-device_cleanup-greybus2-v1-1-5f7d1161e684@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a new API, tegra_xusb_padctl_get_port_number,
to the Tegra XUSB Pad Controller driver. This API is used to identify
the USB port that is associated with a given PHY.
The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input
and returns the corresponding port number. If the PHY pointer is invalid,
it returns -ENODEV.
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240307030328.1487748-2-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the dio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240212-bus_cleanup-dio-v2-1-3b1ba4c0547d@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add zynqmp_pm_efuse_access API in the ZynqMP
firmware for read/write access of efuse memory.
Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114516.86365-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the slimbus_bus variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114403.86230-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
for-6.9/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.9
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)"
* tag 'nvme-6.9-2024-03-07' of git://git.infradead.org/nvme: (31 commits)
nvme: clear caller pointer on identify failure
nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse()
nvme: fcloop: make fcloop_class constant
nvme: fabrics: make nvmf_class constant
nvme: core: constify struct class usage
nvme-fabrics: typo in nvmf_parse_key()
nvme-multipath: use atomic queue limits API for stacking limits
nvme-multipath: pass queue_limits to blk_alloc_disk
nvme: use the atomic queue limits update API
nvme: cleanup nvme_configure_metadata
nvme: don't query identify data in configure_metadata
nvme: split out a nvme_identify_ns_nvm helper
nvme: move common logic into nvme_update_ns_info
nvme: move setting the write cache flags out of nvme_set_queue_limits
nvme: move a few things out of nvme_update_disk_info
nvme: don't use nvme_update_disk_info for the multipath disk
nvme: move blk_integrity_unregister into nvme_init_integrity
nvme: cleanup the nvme_init_integrity calling conventions
nvme: move max_integrity_segments handling out of nvme_init_integrity
nvme: remove nvme_revalidate_zones
...
|
|
First of all, last_cs_index_mask should be aligned with the original
cs_index_mask, which is 16-bit (for now) wide. Use the same pattern
for the last_cs_index_mask.
Second, last_cs can be negative and since 'char' is equal to 'unsigned
char' in the kernel, it's incorrect, strictly speaking, to assign
signed number to it. Use s8 type as it's done for *_native_cs ones.
With this change, regroup a bit the ordering to avoid too much memory
space to be wasted due to paddings. Shuffle kernel documentation
accordignly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240307150256.3789138-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 4d72c3bb60dd ("net: phylink: strip out pre-March 2020 legacy code")
dropped the mac_pcs_get_state ops in phylink_mac_ops in favor of
dedicated PCS operation pcs_get_state. However, the documentation for
the pcs_get_state ops was incorrectly converted and now self-references.
Drop the extra comment.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The kerneldoc for struct cs_dsp refers to a fw_file_name member but
there's no such member.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240307105516.40250-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode into vfs.misc
Merge case-insensitive updates from Gabriel Krisman Bertazi:
- Patch case-insensitive lookup by trying the case-exact comparison
first, before falling back to costly utf8 casefolded comparison.
- Fix to forbid using a case-insensitive directory as part of an
overlayfs mount.
- Patchset to ensure d_op are set at d_alloc time for fscrypt and
casefold volumes, ensuring filesystem dentries will all have the
correct ops, whether they come from a lookup or not.
* tag 'for-next-6.9' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
gpio_led_register_device() is built whenever CONFIG_LEDS_GPIO_REGISTER is
enabled, and this may be used even when CONFIG_NEW_LEDS is turned off.
However, the stub declaration in the header is provided for all configs
without CONFIG_NEW_LEDS, resulting in a build failure:
drivers/leds/leds-gpio-register.c:24:1: error: redefinition of 'gpio_led_register_device'
24 | gpio_led_register_device(int id, const struct gpio_led_platform_data *pdata)
| ^
include/linux/leds.h:646:39: note: previous definition is here
Change the #ifdef check to match the definition.
Note: this apparently took years of randconfig builds to hit, since
a number of other drivers just 'select NEW_LEDS' anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240228093834.2230004-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Along the same lines as making devm_led_classdev_register() declared
extern unconditional, do the same thing for the two sub-classes
that have similar stubs.
The users of these interfaces go to great lengths to allow building
with both the generic leds API and the extended version, but realistically
there is not much use in this, so just simplify it to always rely
on it and remove the confusing fallback logic.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240109090715.982332-2-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
devm_led_classdev_register_ext() stubs
These two functions have stub implementations that are called when
NEW_LEDS and/or LEDS_CLASS are disabled, theorerically allowing drivers
to optionally use the LED subsystem.
However, this has never really worked because a built-in driver is
unable to link against these functions if the LED class is in a loadable
module. Heiner ran into this problem with a driver that newly gained
a LEDS_CLASS dependency and suggested using an IS_REACHABLE() check.
This is the reverse approach, removing the stub entirely to acknowledge
that it is pointless in its current form, and that not having it avoids
misleading developers into thinking that they can rely on it.
This survived around 1000 randconfig builds to validate that any callers
of the interface already have the correct Kconfig dependency already,
with the exception of the one that Heiner just added.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/linux-leds/0f6f432b-c650-4bb8-a1b5-fe3372804d52@gmail.com/T/#u
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240109090715.982332-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ibs-for-leds-merged
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240223203010.881065-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ExpressWire protocol is shared between at least KTD2692 and KTD2801
with slight differences such as timings and the former not having a
defined set of pulses for enabling the protocol (possibly because it
does not support PWM unlike KTD2801). Despite these differences the
ExpressWire handling code can be shared between the two, so in
preparation for adding KTD2801 support introduce a library implementing
this protocol.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240125-ktd2801-v5-1-e22da232a825@skole.hr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Have an actual mlx5_sd instance in the core device, and fix the getter
accordingly. This allows SD stuff to flow, the feature becomes supported
only here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add a cap bit in mcam_access_reg to check for MPIR support.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
I2C_M_RD is defined as and guaranteed to be 1 and 'flag & I2C_M_RD' is
one or zero. No need for an additional condition to obtain the value.
Signed-off-by: Hsin-Yu.Chen <harry021633@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[wsa: slightly updated commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
* kvm-arm64/vfio-normal-nc:
: Normal-NC support for vfio-pci @ stage-2, courtesy of Ankit Agrawal
:
: KVM's policy to date has been that any and all MMIO mapping at stage-2
: is treated as Device-nGnRE. This is primarily done due to concerns of
: the guest triggering uncontainable failures in the system if they manage
: to tickle the device / memory system the wrong way, though this is
: unnecessarily restrictive for devices that can be reasoned as 'safe'.
:
: Unsurprisingly, the Device-* mapping can really hurt the performance of
: assigned devices that can handle Gathering, and can be an outright
: correctness issue if the guest driver does unaligned accesses.
:
: Rather than opening the floodgates to the full ecosystem of devices that
: can be exposed to VMs, take the conservative approach and allow PCI
: devices to be mapped as Normal-NC since it has been determined to be
: 'safe'.
vfio: Convey kvm that the vfio-pci device is wc safe
KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device
mm: Introduce new flag to indicate wc safe
KVM: arm64: Introduce new flag for non-cacheable IO memory
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
|
