| Age | Commit message (Collapse) | Author |
|---|
|
Add a new ioctl KVM_PRE_FAULT_MEMORY in the KVM common code. It iterates on the
memory range and calls the arch-specific function. The implementation is
optional and enabled by a Kconfig symbol.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <819322b8f25971f2b9933bfa4506e618508ad782.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The flags AS_UNMOVABLE and AS_INACCESSIBLE were both added just for guest_memfd;
AS_UNMOVABLE is already in existing versions of Linux, while AS_INACCESSIBLE was
acked for inclusion in 6.11.
But really, they are the same thing: only guest_memfd uses them, at least for
now, and guest_memfd pages are unmovable because they should not be
accessed by the CPU.
So merge them into one; use the AS_INACCESSIBLE name which is more comprehensive.
At the same time, this fixes an embarrassing bug where AS_INACCESSIBLE was used
as a bit mask, despite it being just a bit index.
The bug was mostly benign, because AS_INACCESSIBLE's bit representation (1010)
corresponded to setting AS_UNEVICTABLE (which is already set) and AS_ENOSPC
(except no async writes can happen on the guest_memfd). So the AS_INACCESSIBLE
flag simply had no effect.
Fixes: 1d23040caa8b ("KVM: guest_memfd: Use AS_INACCESSIBLE when creating guest_memfd inode")
Fixes: c72ceafbd12c ("mm: Introduce AS_INACCESSIBLE for encrypted/confidential memory")
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The timer/counter block on the Realtek SoCs provides up to 5 timers. It
also includes a watchdog timer which is handled by the
realtek_otto_wdt.c driver.
One timer will be used per CPU as a local clock event generator. An
additional timer will be used as an overal stable clocksource.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240710043524.1535151-8-chris.packham@alliedtelesis.co.nz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
|
|
Out of several drivers implementing the .set_trip_temp() thermal zone
operation, three don't actually use the trip ID argument passed to it,
two call __thermal_zone_get_trip() to get a struct thermal_trip
corresponding to the given trip ID, and the other use the trip ID as an
index into their own data structures with the assumption that it will
always match the ordering of entries in the trips table passed to the
core during thermal zone registration, which is fragile and not really
guaranteed.
Even though the trip IDs used by the core are in fact their indices in the
trips table passed to it by the thermal zone creator, that is purely a
matter of convenience and should not be relied on for correctness.
For this reason, modify trip_point_temp_store() to pass a (const) trip
pointer to .set_trip_temp() and adjust the drivers implementing it
accordingly.
This helps to simplify the drivers invoking __thermal_zone_get_trip()
from their .set_trip_temp() callback functions because they will not
need to do it now and the other drivers can store their internal
trip indices in the priv field in struct thermal_trip and their
.set_trip_temp() callback functions can get those indices from there.
The intel_quark_dts thermal driver can instead use the trip type to
determine the requisite trip index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8392906.T7Z3S40VBb@rjwysocki.net
[ rjw: Add missing colon and 2 empty code lines ]
[ rjw: Add missing change in imx_thermal.c and adjust the changelog ]
[ rjw: Drop an unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The "early" part of the helper's name isn't accurate[1]. Drop it in
preparation for adding a new (not early) usage.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In fact, this structure contains a flexible array at the end, but
historically its size, alignment etc., is calculated manually.
There are several instances of the structure embedded into other
structures, but also there's ongoing effort to remove them and we
could in the meantime declare &net_device properly.
Declare the array explicitly, use struct_size() and store the array
size inside the structure, so that __counted_by() can be applied.
Don't use PTR_ALIGN(), as SLUB itself tries its best to ensure the
allocated buffer is aligned to what the user expects.
Also, change its alignment from %NETDEV_ALIGN to the cacheline size
as per several suggestions on the netdev ML.
bloat-o-meter for vmlinux:
free_netdev 445 440 -5
netdev_freemem 24 - -24
alloc_netdev_mqs 1481 1450 -31
On x86_64 with several NICs of different vendors, I was never able to
get a &net_device pointer not aligned to the cacheline size after the
change.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240710113036.2125584-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The only managed mapping function currently is pcim_iomap() which doesn't
allow for mapping an area starting at a certain offset, which many drivers
want.
Add pcim_iomap_range() as an exported function.
Link: https://lore.kernel.org/r/20240613115032.29098-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCI subfunctions (SF) are anchored on the auxiliary bus. PCI physical
and virtual functions are anchored on the PCI bus. The irq information
of each such function is visible to users via sysfs directory "msi_irqs"
containing files for each irq entry. However, for PCI SFs such
information is unavailable. Due to this users have no visibility on IRQs
used by the SFs.
Secondly, an SF can be multi function device supporting rdma, netdevice
and more. Without irq information at the bus level, the user is unable
to view or use the affinity of the SF IRQs.
Hence to match to the equivalent PCI PFs and VFs, add "irqs" directory,
for supporting auxiliary devices, containing file for each irq entry.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
v9-v10:
- remove Przemek RB
- add name field to auxiliary_irq_info (Greg and Przemek)
- handle bogus IRQ in auxiliary_device_sysfs_irq_remove (Greg)
v8-v9:
- add Przemek RB
- use guard() in auxiliary_irq_dir_prepare (Paolo)
v7-v8:
- use cleanup.h for info and name fields (Greg)
- correct error flow in auxiliary_irq_dir_prepare (Przemek)
- add documentation for new fields of auxiliary_device (Simon)
v6-v7:
- dynamically creating irqs directory when first irq file created (Greg)
- removed irqs flag and simplified the dev_add() API (Greg)
- move sysfs related new code to a new auxiliary_sysfs.c file (Greg)
v5-v6:
- removed concept of shared and exclusive and hence global xarray (Greg)
v4-v5:
- restore global mutex and replace refcount_t with simple integer (Greg)
v3->4:
- remove global mutex (Przemek)
v2->v3:
- fix function declaration in case SYSFS isn't defined
v1->v2:
- move #ifdefs from drivers/base/auxiliary.c to
include/linux/auxiliary_bus.h (Greg)
- use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL (Greg)
- Fix kzalloc(ref) to kzalloc(*ref) (Simon)
- Add return description in auxiliary_device_sysfs_irq_add() kdoc (Simon)
- Fix auxiliary_irq_mode_show doc (kernel test boot)
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This fixes two regressions that have been bubbling along for a large
part of this release.
One is a revert of the multi mode support for the OMAP SPI controller,
this introduced regressions on a number of systems and while there has
been progress on fixing those we've not got something that works for
everyone yet so let's just drop the change for now.
The other is a series of fixes from David Lechner for his recent
message optimisation work, this interacted badly with spi-mux which
is altogether too clever with recursive use of the bus and creates
situations that hadn't been considered.
There are also a couple of small driver specific fixes, including one
more patch from David for sleep duration calculations in the AXI
driver"
* tag 'spi-fix-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mux: set ctlr->bits_per_word_mask
spi: add defer_optimize_message controller flag
spi: don't unoptimize message in spi_async()
spi: omap2-mcspi: Revert multi mode support
spi: davinci: Unset POWERDOWN bit when releasing resources
spi: axi-spi-engine: fix sleep calculation
spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices
|
|
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
|
|
'for-next/mte', 'for-next/errata', 'for-next/acpi', 'for-next/gic-v3-pmr' and 'for-next/doc', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: add missing MODULE_DESCRIPTION() macros
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible
perf: pmuv3: Add new Cortex and Neoverse PMUs
dt-bindings: arm: pmu: Add new Cortex and Neoverse cores
perf/arm-cmn: Enable support for tertiary match group
perf/arm-cmn: Decouple wp_config registers from filter group number
* for-next/cpufeature:
: Various cpufeature infrastructure patches
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
arm64/cpufeatures/kvm: Add ARMv8.9 FEAT_ECBHB bits in ID_AA64MMFR1 register
* for-next/misc:
: Miscellaneous patches
arm64: smp: Fix missing IPI statistics
arm64: Cleanup __cpu_set_tcr_t0sz()
arm64/mm: Stop using ESR_ELx_FSC_TYPE during fault
arm64: Kconfig: fix typo in __builtin_return_adddress
ARM64: reloc_test: add missing MODULE_DESCRIPTION() macro
arm64: implement raw_smp_processor_id() using thread_info
arm64/arch_timer: include <linux/percpu.h>
* for-next/kselftest:
: arm64 kselftest updates
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
kselftest/arm64: Fix a couple of spelling mistakes
kselftest/arm64: Fix redundancy of a testcase
kselftest/arm64: Include kernel mode NEON in fp-stress
* for-next/mte:
: MTE updates
arm64: mte: Make mte_check_tfsr_*() conditional on KASAN instead of MTE
* for-next/errata:
: Arm CPU errata workarounds
arm64: errata: Expand speculative SSBS workaround
arm64: errata: Unify speculative SSBS errata logic
arm64: cputype: Add Cortex-X925 definitions
arm64: cputype: Add Cortex-A720 definitions
arm64: cputype: Add Cortex-X3 definitions
* for-next/acpi:
: arm64 ACPI patches
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
ACPI / amba: Drop unnecessary check for registered amba_dummy_clk
arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/
arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/
ACPI: arm64: Sort entries alphabetically
* for-next/gic-v3-pmr:
: arm64: irqchip/gic-v3: Use compiletime constant PMR values
arm64: irqchip/gic-v3: Select priorities at boot time
irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier
irqchip/gic-v3: Make distributor priorities variables
irqchip/gic-common: Remove sync_access callback
wordpart.h: Add REPEAT_BYTE_U32()
* for-next/doc:
: arm64 documentation updates
Documentation: arm64: Update memory.rst for TBI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"cachefiles:
- Export an existing and add a new cachefile helper to be used in
filesystems to fix reference count bugs
- Use the newly added fscache_ty_get_volume() helper to get a
reference count on an fscache_volume to handle volumes that are
about to be removed cleanly
- After withdrawing a fscache_cache via FSCACHE_CACHE_IS_WITHDRAWN
wait for all ongoing cookie lookups to complete and for the object
count to reach zero
- Propagate errors from vfs_getxattr() to avoid an infinite loop in
cachefiles_check_volume_xattr() because it keeps seeing ESTALE
- Don't send new requests when an object is dropped by raising
CACHEFILES_ONDEMAND_OJBSTATE_DROPPING
- Cancel all requests for an object that is about to be dropped
- Wait for the ondemand_boject_worker to finish before dropping a
cachefiles object to prevent use-after-free
- Use cyclic allocation for message ids to better handle id recycling
- Add missing lock protection when iterating through the xarray when
polling
netfs:
- Use standard logging helpers for debug logging
VFS:
- Fix potential use-after-free in file locks during
trace_posix_lock_inode(). The tracepoint could fire while another
task raced it and freed the lock that was requested to be traced
- Only increment the nr_dentry_negative counter for dentries that are
present on the superblock LRU. Currently, DCACHE_LRU_LIST list is
used to detect this case. However, the flag is also raised in
combination with DCACHE_SHRINK_LIST to indicate that dentry->d_lru
is used. So checking only DCACHE_LRU_LIST will lead to wrong
nr_dentry_negative count. Fix the check to not count dentries that
are on a shrink related list
Misc:
- hfsplus: fix an uninitialized value issue in copy_name
- minix: fix minixfs_rename with HIGHMEM. It still uses kunmap() even
though we switched it to kmap_local_page() a while ago"
* tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minixfs: Fix minixfs_rename with HIGHMEM
hfsplus: fix uninit-value in copy_name
vfs: don't mod negative dentry count when on shrinker list
filelock: fix potential use-after-free in posix_lock_inode
cachefiles: add missing lock protection when polling
cachefiles: cyclic allocation of msg_id to avoid reuse
cachefiles: wait for ondemand_object_worker to finish when dropping object
cachefiles: cancel all requests for the object that is being dropped
cachefiles: stop sending new request when dropping object
cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
netfs: Switch debug logging to pr_debug()
|
|
Start changing the wording of the I2C main header wrt. the newest I2C
v7 and SMBus 3.2 specifications and replace "master/slave" with more
appropriate terms. The first step renames the members of struct
i2c_algorithm. Once all in-tree users are converted, the anonymous union
will go away again. All this work will also pave the way for finally
seperating the monolithic header into more fine-grained headers like
"i2c/clients.h" etc.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Commit series that makes some small improvements to code and the
kernel log messages.
|
|
Introduce a new help addrs_per_page() to wrap common code
from addrs_per_inode() and addrs_per_block() for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 15 of which are cc:stable.
No identifiable theme here - all are singleton patches, 19 are for MM"
* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
filemap: replace pte_offset_map() with pte_offset_map_nolock()
arch/xtensa: always_inline get_current() and current_thread_info()
sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
mm: fix crashes from deferred split racing folio migration
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
mm: gup: stop abusing try_grab_folio
nilfs2: fix kernel bug on rename operation of broken directory
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
cachestat: do not flush stats in recency check
mm/shmem: disable PMD-sized page cache if needed
mm/filemap: skip to create PMD-sized page cache if needed
mm/readahead: limit page cache size in page_cache_ra_order()
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
Fix userfaultfd_api to return EINVAL as expected
mm: vmalloc: check if a hash-index is in cpu_possible_mask
mm: prevent derefencing NULL ptr in pfn_section_valid()
...
|
|
As suggested by the B-ext spec, the Zbc (carry-less multiplication)
instructions can be used to accelerate CRC calculations. Currently, the
crc32 is the most widely used crc function inside kernel, so this patch
focuses on the optimization of just the crc32 APIs.
Compared with the current table-lookup based optimization, Zbc based
optimization can also achieve large stride during CRC calculation loop,
meantime, it avoids the memory access latency of the table-lookup based
implementation and it reduces memory footprint.
If Zbc feature is not supported in a runtime environment, then the
table-lookup based implementation would serve as fallback via alternative
mechanism.
By inspecting the vmlinux built by gcc v12.2.0 with default optimization
level (-O2), we can see below instruction count change for each 8-byte
stride in the CRC32 loop:
rv64: crc32_be (54->31), crc32_le (54->13), __crc32c_le (54->13)
rv32: crc32_be (50->32), crc32_le (50->16), __crc32c_le (50->16)
The compile target CPU is little endian, extra effort is needed for byte
swapping for the crc32_be API, thus, the instruction count change is not
as significant as that in the *_le cases.
This patch is tested on QEMU VM with the kernel CRC32 selftest for both
rv64 and rv32. Running the CRC32 selftest on a real hardware (SpacemiT K1)
with Zbc extension shows 65% and 125% performance improvement respectively
on crc32_test() and crc32c_test().
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240621054707.1847548-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If CONFIG_ZSWAP is set to N, it means zswap cannot be enabled.
zswap_never_enabled() should return true.
The only effect of this issue is that with Barry's latest large folio
swapin patches for zram ("mm: support mTHP swap-in for zRAM-like
swapfile"), we will always fallback to order-0 swapin, even mistakenly
when !CONFIG_ZSWAP.
Basically this bug makes Barry's in progress patches not work at all.
The API was created to inform the mm core that zswap has never been
enabled, allowing the mm core to perform mTHP swap-in. This is a
transitional solution until zswap supports mTHP. If zswap has been
enabled, performing mTHP swap-in will result in corrupted data. You
may find the answer in the mTHP swap-in series:
https://lore.kernel.org/linux-mm/CAJD7tkZ4FQr6HZpduOdvmqgg_-whuZYE-Bz5O2t6yzw6Yg+v1A@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240629232231.42394-1-21cnbao@gmail.com
Fixes: 0300e17d67c3 ("mm: zswap: add zswap_never_enabled()")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab
tracking is enabled. It has been default-enabled and equivalent to
CONFIG_MEMCG for almost a decade. We've only grown more kernel memory
accounting sites since, and there is no imaginable cgroup usecase going
forward that wants to track user pages but not the multitude of
user-drivable kernel allocations.
Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memcg v1-specific fields serve a buffer function between read-mostly and
update often parts of the mem_cgroup_per_node structure. If
CONFIG_MEMCG_V1 is not set and these fields are not present, an explicit
cacheline padding is needed.
Link: https://lkml.kernel.org/r/20240701185932.704807-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the grouping of the cgroup v1-related fields and the corresponding
reorganization of the struct mem_cgroup, the existing cache line padding
doesn't make much sense anymore. Let's drop it for now and put back to
new places, if necessary.
Link: https://lkml.kernel.org/r/20240701185932.704807-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Switch some asserts to WARN()
- Fix a few "transaction not locked" asserts in the data read retry
paths and backpointers gc
- Fix a race that would cause the journal to get stuck on a flush
commit
- Add missing fsck checks for the fragmentation LRU
- The usual assorted ssorted syzbot fixes
* tag 'bcachefs-2024-07-10' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Add missing bch2_trans_begin()
bcachefs: Fix missing error check in journal_entry_btree_keys_validate()
bcachefs: Warn on attempting a move with no replicas
bcachefs: bch2_data_update_to_text()
bcachefs: Log mount failure error code
bcachefs: Fix undefined behaviour in eytzinger1_first()
bcachefs: Mark bch_inode_info as SLAB_ACCOUNT
bcachefs: Fix bch2_inode_insert() race path for tmpfiles
closures: fix closure_sync + closure debugging
bcachefs: Fix journal getting stuck on a flush commit
bcachefs: io clock: run timer fns under clock lock
bcachefs: Repair fragmentation_lru in alloc_write_key()
bcachefs: add check for missing fragmentation in check_alloc_to_lru_ref()
bcachefs: bch2_btree_write_buffer_maybe_flush()
bcachefs: Add missing printbuf_tabstops_reset() calls
bcachefs: Fix loop restart in bch2_btree_transactions_read()
bcachefs: Fix bch2_read_retry_nodecode()
bcachefs: Don't use the new_fs() bucket alloc path on an initialized fs
bcachefs: Fix shift greater than integer size
bcachefs: Change bch2_fs_journal_stop() BUG_ON() to warning
...
|
|
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
__cacheline_group_begin(), unfortunately, doesn't align the group
anyhow. If it is wanted, then you need to do something like
__cacheline_group_begin(grp) __aligned(ALIGN)
which isn't really convenient nor compact.
Add the _aligned() counterparts to align the groups automatically to
either the specified alignment (optional) or ``SMP_CACHE_BYTES``.
Note that the actual struct layout will then be (on x64 with 64-byte CL):
struct x {
u32 y; // offset 0, size 4, padding 56
__cacheline_group_begin__grp; // offset 64, size 0
u32 z; // offset 64, size 4, padding 4
__cacheline_group_end__grp; // offset 72, size 0
__cacheline_group_pad__grp; // offset 72, size 0, padding 56
u32 w; // offset 128
};
The end marker is aligned to long, so that you can assert the struct
size more strictly, but the offset of the next field in the structure
will be aligned to the group alignment, so that the next field won't
fall into the group it's not intended to.
Add __LARGEST_ALIGN definition and LARGEST_ALIGN() macro.
__LARGEST_ALIGN is the value to which the compilers align fields when
__aligned_largest is specified. Sometimes, it might be needed to get
this value outside of variable definitions. LARGEST_ALIGN() is macro
which just aligns a value to __LARGEST_ALIGN.
Also add SMP_CACHE_ALIGN(), similar to L1_CACHE_ALIGN(), but using
``SMP_CACHE_BYTES`` instead of ``L1_CACHE_BYTES`` as the former
also accounts L2, needed in some cases.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into HEAD
Immutable branch between MFD and Counter due for the v5.11 merge window
|
|
This function is not supposed to be used any more since commit
c748a6d77c06 ("pwm: Rename pwm_apply_state() to
pwm_apply_might_sleep()") that is included in v6.8-rc1. Two kernel
releases should be enough for everyone to adapt, so drop the old
function that was introduced as a compatibility stub for the transition.
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
When .get_state() is called is an implementation detail that
implementors and users shouldn't care about and rely on. Additionally
it's wrong, because with PWM_DEBUG enabled it is called more often.
Just drop the wrong statement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/611ba758d7e9fb2695e96b23cb7ceeefb6ba8513.1717756902.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The last user of this function outside of core.c is gone, so it can be
made static.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240607084416.897777-8-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Define all pwm core's symbols in the namespace "PWM". The necessary
module import statement is just added to the main header, this way every
file that knows about the public functions automatically has this
namespace available.
Thanks to Biju Das for pointing out a cut'n'paste failure in my initial
patch.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240607160012.1206874-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
originally, stack closures were only used synchronously, and with the
original implementation of closure_sync() the ref never hit 0; thus,
closure_put_after_sub() assumes that if the ref hits 0 it's on the debug
list, in debug mode.
that's no longer true with the current implementation of closure_sync,
so we need a new magic so closure_debug_destroy() doesn't pop an assert.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
drivers/dio/dio-driver.c:128:11: error: initialization of ‘int (*)(struct device *, const struct device_driver *)’ from incompatible pointer type ‘int (*)(struct device *, struct device_driver *)’ [-Werror=incompatible-pointer-types]
128 | .match = dio_bus_match,
| ^~~~~~~~~~~~~
drivers/dio/dio-driver.c:128:11: note: (near initialization for ‘dio_bus_type.match’)
Reported-by: noreply@ellerman.id.au
Fixes: d69d804845985c29 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240710074452.2841173-1-geert@linux-m68k.org
[ added dio.h change - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently there is no standardized method for USB drivers to handle
shutdown events. This patch simplifies running code on shutdown for USB
devices by adding a shutdown callback to usb_driver.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/7AAC1BF4-8B60-448D-A3C1-B7E80330BE42@live.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the beginning of time, struct usb_ep::maxpacket was a bitfield,
and when new 16-bit members were added, the convention was followed:
1da177e4c3f41 (Linus Torvalds 2005-04-16 236) unsigned maxpacket:16;
e117e742d3106 (Robert Baldyga 2013-12-13 237) unsigned maxpacket_limit:16;
a59d6b91cbca5 (Tatyana Brokhman 2011-06-28 238) unsigned max_streams:16;
However, there is no need for this as a simple u16 can be used instead,
simplifying the struct and the resulting compiler binary output. Switch
to u16 for all three, and rearrange struct slightly to minimize holes.
No change in the final size of the struct results; the 2 byte gap is
just moved to the end, as seen with pahole:
- /* XXX 2 bytes hole, try to pack */
...
/* size: 72, cachelines: 2, members: 15 */
...
+ /* padding: 2 */
Changing this simplifies future introspection[1] of maxpacket's type during
allocations:
drivers/usb/gadget/function/f_tcm.c:330:24: error: 'typeof' applied to a bit-field
330 | fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL);
Link: https://lore.kernel.org/all/202407090928.6UaOAZAJ-lkp@intel.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240709154953.work.953-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out a helper function, dm_devt_from_path(), from dm_get_device()
for use in dm targets.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The max_secure_erase_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The max_write_zeroes_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match callback for busses was changed to
take a const pointer to struct device_driver. Unfortunately I missed
fixing up the zorro code, and was only noticed after-the-fact by the
kernel test robot. Resolve this issue by properly changing the
zorro_bus_match() function.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240710073413.495541-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function driver_find_device() does not modify the struct
device_driver structure directly, so it is safe to be marked as a
constant pointer type. As that is fixed up, also change the function
signature on the inline functions that call this, which are:
driver_find_device_by_name()
driver_find_device_by_of_node()
driver_find_device_by_devt()
driver_find_next_device()
driver_find_device_by_acpi_dev()
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070849-broken-front-9eb5@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions driver_create_file() and driver_remove_file() do not
modify the struct device_driver structure directly, so they are safe to
be marked as a constant pointer type.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070844-volley-hatchling-c812@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:
dma_direct_map_page:
1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce
dma_direct_unmap_page:
2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
swiotlb_bounce
4. is_swiotlb_buffer
5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
6. swiotlb_tbl_unmap_single -> swiotlb_release_slots
Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.
There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.
Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:
* swiotlb_find_pool() becomes __swiotlb_find_pool()
* is_swiotlb_buffer() becomes swiotlb_find_pool()
* is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()
With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):
dma_direct_unmap_page:
1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
2. swiotlb_tbl_unmap_single -> swiotlb_find_pool
These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.
No functional change is intended.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.
This will later permit simplifying pcim_enable_device().
Move the 'pinned' boolean bit to struct pci_dev.
Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.
Link: https://lore.kernel.org/r/20240613115032.29098-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Mark alloc_tag_{save|restore} as always_inline to fix the following
modpost warnings:
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_save+0x1c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_restore+0x3c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
The warnings happen when these functions are called from an __init
function and they don't get inlined (remain in the .text section) while
the value returned by get_current() points into .init.data section.
Assuming get_current() always returns a valid address, this situation can
happen only during init stage and accessing .init.data from .text section
during that stage should pose no issues.
Link: https://lkml.kernel.org/r/20240704132506.1011978-1-surenb@google.com
Fixes: 22d407b164ff ("lib: add allocation tagging support for memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407032306.gi9nZsBi-lkp@intel.com/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
