| Age | Commit message (Collapse) | Author |
|---|
|
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/20240702063444.105814-1-baolu.lu@linux.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.
User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.
A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.
Link: https://lore.kernel.org/r/20240702063444.105814-7-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Adding spi_optimize_message() broke the spi-mux driver because it
calls spi_async() from it's transfer_one_message() callback. This
resulted in passing an incorrectly optimized message to the controller.
For example, if the underlying controller has an optimize_message()
callback, this would have not been called and can cause a crash when
the underlying controller driver tries to transfer the message.
Also, since the spi-mux driver swaps out the controller pointer by
replacing msg->spi, __spi_unoptimize_message() was being called with a
different controller than the one used in __spi_optimize_message(). This
could cause a crash when attempting to free the message resources when
__spi_unoptimize_message() is called in spi_finalize_current_message()
since it is being called with a controller that did not allocate the
resources.
This is fixed by adding a defer_optimize_message flag for controllers.
This flag causes all of the spi_[maybe_][un]optimize_message() calls to
be a no-op (other than attaching a pointer to the spi device to the
message).
This allows the spi-mux driver to pass an unmodified message to
spi_async() in spi_mux_transfer_one_message() after the spi device has
been swapped out. This causes __spi_optimize_message() and
__spi_unoptimize_message() to be called only once per message and with
the correct/same controller in each case.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/
Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some drivers will need to store integers in the priv field of struct
thermal_trip, so add conversion macros for doing this in a consistent
way and switch over the int340x_thermal driver that already does it and
uses custom conversion functions to using the new macros.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3297884.aeNJFYEL58@rjwysocki.net
|
|
Introduce a new helper function thermal_trip_is_bound_to_cdev() for
checking whether or not a given trip point has been bound to a given
cooling device.
The primary user of it will be the Tegra thermal driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13545762.uLZWGnKmhe@rjwysocki.net
|
|
It is better to use unsigned int as the data type for the passive_delay
and polling_delay arguments of thermal_zone_device_register_with_trips()
because they are implicitly cast to unsigned int anyway in
thermal_set_delay_jiffies() and if they happen to be negative at that
point, the resulting behavior may not be as desired.
Update the thermal_zone_device_register_with_trips() definition
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5803791.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Merge OPP Updates for 6.11 from Viresh Kumar:
"- Introduce an OF helper function to inform if required-opps is
used (Ulf Hansson).
- Generic cleanups (Ulf Hansson and Viresh Kumar)."
* tag 'opp-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.11 from Viresh Kumar:
"- cpufreq: Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Make exit() callback return void (Lizhe and Viresh Kumar).
- Minor cleanups and fixes in several drivers (Bryan Brattlof,
Javier Carrasco, Jagadeesh Kona, Jeff Johnson, Nícolas F. R. A. Prado,
Primoz Fiser, Raphael Gallais-Pou, and Riwen Lu)."
* tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (21 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: ti: update OPP table for AM62Px SoCs
cpufreq: ti: update OPP table for AM62Ax SoCs
cpufreq: sun50i: add Allwinner H700 speed bin
cpufreq/cppc: Don't compare desired_perf in target()
OPP: ti: Fix ti_opp_supply_probe wrong return values
cpufreq: ti-cpufreq: Handle deferred probe with dev_err_probe()
cpufreq: dt-platdev: add missing MODULE_DESCRIPTION() macro
cpufreq: longhaul: Fix kernel-doc param for longhaul_setstate
cpufreq: qcom-nvmem: eliminate uses of of_node_put()
cpufreq: qcom-nvmem: fix memory leaks in probe error paths
cpufreq: scmi: Avoid overflow of target_freq in fast switch
cpufreq: sun50i: replace of_node_put() with automatic cleanup handler
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
into soc/drivers
arm64: Xilinx SoC changes for 6.11
Timer
- Fix u32 overflow issue in 32-bit width PWM mode.
Event manager:
- rename cpu_number1 to dummy_cpu_number
Power:
- Add cb event for subsystem restart
- check return status of get_api_version()
Firmware:
- Move FIRMWARE_VERSION_MASK to xlnx-zynqmp.h
* tag 'zynqmp-soc2-for-6.11' of https://github.com/Xilinx/linux-xlnx:
drivers: soc: xilinx: check return status of get_api_version()
firmware: xilinx: Move FIRMWARE_VERSION_MASK to xlnx-zynqmp.h
soc: xilinx: Add cb event for subsystem restart
soc: xilinx: rename cpu_number1 to dummy_cpu_number
pwm: xilinx: Fix u32 overflow issue in 32-bit width PWM mode.
Link: https://lore.kernel.org/r/CAHTX3dKMtqgNpkEvrw0p2w+SPN83Ai1_kzhefUGOO5rMkPaH_w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert Spitz to use software nodes for specifying GPIOs for the MMC.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240628180852.1738922-9-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is done in preparation for the pre-creation of hardware virtqueues
at device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-11-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is done in preparation for the pre-creation of hardware virtqueues
at device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-10-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
perf_pending_irq() invokes perf_event_wakeup() and __perf_pending_irq().
The former is in charge of waking any tasks which waits to be woken up
while the latter disables perf-events.
The irq_work perf_pending_irq(), while this an irq_work, the callback
is invoked in thread context on PREEMPT_RT. This is needed because all
the waking functions (wake_up_all(), kill_fasync()) acquire sleep locks
which must not be used with disabled interrupts.
Disabling events, as done by __perf_pending_irq(), expects a hardirq
context and disabled interrupts. This requirement is not fulfilled on
PREEMPT_RT.
Split functionality based on perf_event::pending_disable into irq_work
named `pending_disable_irq' and invoke it in hardirq context on
PREEMPT_RT. Rename the split out callback to perf_pending_disable().
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-8-bigeasy@linutronix.de
|
|
The swevent_htable::recursion counter is used to avoid creating an
swevent while an event is processed to avoid recursion. The counter is
per-CPU and preemption must be disabled to have a stable counter.
perf_pending_task() disables preemption to access the counter and then
signal. This is problematic on PREEMPT_RT because sending a signal uses
a spinlock_t which must not be acquired in atomic on PREEMPT_RT because
it becomes a sleeping lock.
The atomic context can be avoided by moving the counter into the
task_struct. There is a 4 byte hole between futex_state (usually always
on) and the following perf pointer (perf_event_ctxp). After the
recursion lost some weight it fits perfectly.
Move swevent_htable::recursion into task_struct.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-6-bigeasy@linutronix.de
|
|
A signal is delivered by raising irq_work() which works from any context
including NMI. irq_work() can be delayed if the architecture does not
provide an interrupt vector. In order not to lose a signal, the signal
is injected via task_work during event_sched_out().
Instead going via irq_work, the signal could be added directly via
task_work. The signal is sent to current and can be enqueued on its
return path to userland.
Queue signal via task_work and consider possible NMI context. Remove
perf_event::pending_sigtrap and and use perf_event::pending_work
instead.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-4-bigeasy@linutronix.de
|
|
Adding task_work from NMI context requires the following:
- The kasan_record_aux_stack() is not NMU safe and must be avoided.
- Using TWA_RESUME is NMI safe. If the NMI occurs while the CPU is in
userland then it will continue in userland and not invoke the `work'
callback.
Add TWA_NMI_CURRENT as an additional notify mode. In this mode skip
kasan and use irq_work in hardirq-mode to for needed interrupt. Set
TIF_NOTIFY_RESUME within the irq_work callback due to k[ac]san
instrumentation in test_and_set_bit() which does not look NMI safe in
case of a report.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240704170424.1466941-3-bigeasy@linutronix.de
|
|
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org
|
|
Re-introduce task_work_cancel(), this time to cancel an actual callback
and not *any* callback pointing to a given function. This is going to be
needed for perf events event freeing.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-3-frederic@kernel.org
|
|
A proper task_work_cancel() API that actually cancels a callback and not
*any* callback pointing to a given function is going to be needed for
perf events event freeing. Do the appropriate rename to prepare for
that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-2-frederic@kernel.org
|
|
Some power-domains may be capable of relying on the HW to control the power
for a device that's hooked up to it. Typically, for these kinds of
configurations the consumer driver should be able to change the behavior of
power domain at runtime, control the power domain in SW mode for certain
configurations and handover the control to HW mode for other usecases.
To allow a consumer driver to change the behaviour of the PM domain for its
device, let's provide a new function, dev_pm_genpd_set_hwmode(). Moreover,
let's add a corresponding optional genpd callback, ->set_hwmode_dev(),
which the genpd provider should implement if it can support switching
between HW controlled mode and SW controlled mode. Similarly, add the
dev_pm_genpd_get_hwmode() to allow consumers to read the current mode and
its corresponding optional genpd callback, ->get_hwmode_dev(), which the
genpd provider can also implement to synchronize the initial HW mode
state in genpd_add_device() by reading back the mode from the hardware.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240624044809.17751-2-quic_jkona@quicinc.com
|
|
All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Reformat the comments to utilize the maximum line length and use single
line comments where appropriate. Remove superfluous comments, too.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-13-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove meanwhile unneeded includes, only add types.h for dma_addr_t.
Also, remove an obsolete forward declaration while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-12-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit 568494db6809 ("mtd: remove tmio_nand driver") and commit
aceae7848624 ("fbdev: remove tmiofb driver"), these accessors have no
users anymore. Remove them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-10-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With commit 8971bb812e3c ("mfd: remove toshiba tmio drivers"), all users
of platform data for NAND and framebuffers are gone. So, remove
definitions from the header, too.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-9-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Not all registers in PMU_ALIVE block support atomic set/clear operations.
GS101_SYSIP_DAT0 and GS101_SYSTEM_CONFIGURATION registers are two regs
where attempting atomic access fails.
As documentation on exactly which registers support atomic operations is
not forthcoming. We default to atomic access, unless the register is
explicitly added to the tensor_is_atomic() function. Update the comment
to reflect this as well.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702063514.6215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.11, part 2
This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs,
which also touches PHY driver and device tree, and pulls in a new
regulator_hardware_enable() helper.
The Tegra BPMP reset driver can be compiled under COMPILE_TEST now.
* tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux:
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs
reset: renesas: Add USB VBUS regulator device as child
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document USB VBUS regulator
reset: tegra-bpmp: allow building under COMPILE_TEST
regulator: core: Add helper for allow HW access to enable/disable regulator
Link: https://lore.kernel.org/r/20240703100809.2773890-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
for-6.11/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.11
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)"
* tag 'nvme-6.11-2024-07-08' of git://git.infradead.org/nvme: (21 commits)
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
nvme-multipath: implement "queue-depth" iopolicy
nvme-multipath: prepare for "queue-depth" iopolicy
nvme-pci: do not directly handle subsys reset fallout
lpfc_nvmet: implement 'host_traddr'
nvme-fcloop: implement 'host_traddr'
nvmet-fc: implement host_traddr()
nvmet-rdma: implement host_traddr()
nvmet-tcp: implement host_traddr()
nvmet: add 'host_traddr' callback for debugfs
nvmet: add debugfs support
mailmap: add entry for Weiwen Hu
nvme: rename CDR/MORE/DNR to NVME_STATUS_*
nvme: fix status magic numbers
nvme: rename nvme_sc_to_pr_err to nvme_status_to_pr_err
nvme: split device add from initialization
nvme: fc: split controller bringup handling
nvme: rdma: split controller bringup handling
nvme: tcp: split controller bringup handling
...
|
|
Instead of computing the number of descriptor blocks a transaction can
have each time we need it (which is currently when starting each
transaction but will become more frequent later) precompute the number
once during journal initialization together with maximum transaction
size. We perform the precomputation whenever journal feature set is
updated similarly as for computation of
journal->j_revoke_records_per_block.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There's no reason to have jbd2_journal_get_max_txn_bufs() public
function. Currently all users are internal and can use
journal->j_max_transaction_buffers instead. This saves some unnecessary
recomputations of the limit as a bonus which becomes important as this
function gets more complex in the following patch.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the returned value and make it return void.
Signed-off-by: Lizhe <sensor1010@163.com>
[ Viresh: Reworked the patches to fix all missing changes together. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Mediatek
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # scpi, scmi, vexpress
Acked-by: Mario Limonciello <mario.limonciello@amd.com> # amd
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # bmips
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com> # omap
|
|
APIs to add some properties in a changeset exist but nothing to add a DT
boolean property (i.e. a property without any values).
Fill this lack with of_changeset_add_prop_bool().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-16-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The str_array parameter has no reason to be an un-const array.
Indeed, elements of the 'str_array' array are not changed by the code.
Constify the 'str_array' array parameter.
With this const qualifier added, the following construction is allowed:
static const char * const tab_str[] = { "string1", "string2" };
of_changeset_add_prop_string_array(..., tab_str, ARRAY_SIZE(tab_str));
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-14-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In preparation to consolidating filtering and event processing in the
input core change events() method to return number of events processed
by it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Rust code needs to be able to access _copy_from_user and _copy_to_user
so that it can skip the check_copy_size check in cases where the length
is known at compile-time, mirroring the logic for when C code will skip
check_copy_size. To do this, we ensure that exported versions of these
methods are available when CONFIG_RUST is enabled.
Alice has verified that this patch passes the CONFIG_TEST_USER_COPY test
on x86 using the Android cuttlefish emulator.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240528-alice-mm-v7-2-78222c31b8f4@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Allow the pool_mode setting code to be called from internal callers
so we can call it from a new netlink op. Add a new svc_pool_map_get
function to return the current setting. Change the existing module
parameter handling to use the new interfaces under the hood.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Only pooled services take a reference to the svc_pool_map. The sunrpc
code has always used the sv_nrpools value to detect whether the service
is pooled.
The problem there is that nfsd is a pooled service, but when it's
running in "global" pool_mode, it doesn't take a reference to the pool
map because it has a sv_nrpools value of 1. This means that we have
two separate codepaths for starting the server, depending on whether
it's pooled or not.
Fix this by adding a new flag to the svc_serv, that indicates whether
the serv is pooled. With this we can have the nfsd service
unconditionally take a reference, regardless of pool_mode.
Note that this is a behavior change for
/sys/module/sunrpc/parameters/pool_mode. Usually this file does not
allow you to change the pool-mode while there are nfsd threads running,
but if the pool-mode is "global" it's allowed. My assumption is that
this is a bug, since it probably should never have worked this way.
This patch changes the behavior such that you get back EBUSY even
when nfsd is running in global mode. I think this is more reasonable
behavior, and given that most people set this today using the module
parameter, it's doubtful anyone will notice.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfs_wait_on_request is now only used in write.c. Move it there
and mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests to
prepare for future changes to this code, and move the helpers to write.c
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
nfs_folio_find_and_lock_request and the nfs_page_group_lock_head helper
called by it spend quite some effort to deal with head vs subrequests.
But given that only the head request can be stashed in the folio private
data, non of that is required.
Fold the locking logic from nfs_page_group_lock_head into
nfs_folio_find_and_lock_request and simplify the result based on the
invariant that we always find the head request in the folio private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Remove the code testing folio_test_swapcache either explicitly or
implicitly in pagemap.h headers, as is now handled using the direct I/O
path and not the buffered I/O path that these helpers are located in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 6df25e58532b ("nfs: remove reliance on bdi congestion")
introduced NFS-private solution for limiting number of writes
outstanding against a particular server. Unlike previous bdi congestion
this algorithm actually works and limits number of outstanding writeback
pages to nfs_congestion_kb which scales with amount of client's memory
and is capped at 256 MB. As a result some workloads such as random
buffered writes over NFS got slower (from ~170 MB/s to ~126 MB/s). The
fio command to reproduce is:
fio --direct=0 --ioengine=sync --thread --invalidate=1 --group_reporting=1
--runtime=300 --fallocate=posix --ramp_time=10 --new_group --rw=randwrite
--size=64256m --numjobs=4 --bs=4k --fsync_on_close=1 --end_fsync=1
This happens because the client sends ~256 MB worth of dirty pages to
the server and any further background writeback request is ignored until
the number of writeback pages gets below the threshold of 192 MB. By the
time this happens and clients decides to trigger another round of
writeback, the server often has no pages to write and the disk is idle.
To fix this problem and make the client react faster to eased congestion
of the server by blocking waiting for congestion to resolve instead of
aborting writeback. This improves the random 4k buffered write
throughput to 184 MB/s.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Some pNFS implementations, such as flexible files, want the client to
send the layout stats and layout errors that may have incurred while the
metadata server was booting. To do so, the client sends a layoutreturn
with an all-zero stateid while the server is in grace during reboot
recovery.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add a callback to return the delegation in order to allow generic NFS
code to return the delegation when appropriate.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the server supports the NFSv4.2 protocol extension to optimise away
returning a stateid when it returns a delegation, then we cache that
information in another capability flag.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Query the server for the OPEN arguments that it supports so that
we can figure out which extensions we can use.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
