| Age | Commit message (Collapse) | Author |
|---|
|
'devmodel' hasn't actually been used since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The attach function pointers haven't actually been called since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
topped adding entries to the drivers list.
If you're converting a driver, look at the 'match_port' function
pointer instead.
(There are lots of comment references to 'attach' all over, but they
probably need some deeper understanding to check the semantics
to see if they can be replaced by match_port).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The list has been empty since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
This also means we can remove the 'list_head' from
struct parport_driver.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This add the support to set the optional connector orientation bit which
is part of the optional CONFIG_STANDARD_OUTPUT register 0x18 [1]. This
allows system designers to connect the tcpc orientation pin directly to
the 2:1 ss-mux.
[1] https://www.usb.org/sites/default/files/documents/usb-port_controller_specification_rev2.0_v1.0_0.pdf
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240701132133.3054394-1-m.felsch@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.11
Just two cleanups for W1 core code.
* tag 'w1-drv-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: Drop allocation error message
w1: Add missing newline and fix typos in w1_bus_master comment
|
|
MHI devices usually have a product/device name to identify each device
uniquely. So let's specify that name in 'struct mhi_controller' so that the
client drivers can use this name to uniquely identify the devices and apply
any device specific quirks.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240701021216.17734-2-slark_xiao@163.com
[mani: reworked subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The arm64 asm/arm_pmuv3.h depends on defines from
linux/perf/arm_pmuv3.h. Rather than depend on include order, follow the
usual pattern of "linux" headers including "asm" headers of the same
name.
With this change, the include of linux/kvm_host.h is problematic due to
circular includes:
In file included from ../arch/arm64/include/asm/arm_pmuv3.h:9,
from ../include/linux/perf/arm_pmuv3.h:312,
from ../include/kvm/arm_pmu.h:11,
from ../arch/arm64/include/asm/kvm_host.h:38,
from ../arch/arm64/mm/init.c:41:
../include/linux/kvm_host.h:383:30: error: field 'arch' has incomplete type
Switching to asm/kvm_host.h solves the issue.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-5-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Dedicated caches are available for fixed size allocations via
kmem_cache_alloc(), but for dynamically sized allocations there is only
the global kmalloc API's set of buckets available. This means it isn't
possible to separate specific sets of dynamically sized allocations into
a separate collection of caches.
This leads to a use-after-free exploitation weakness in the Linux
kernel since many heap memory spraying/grooming attacks depend on using
userspace-controllable dynamically sized allocations to collide with
fixed size allocations that end up in same cache.
While CONFIG_RANDOM_KMALLOC_CACHES provides a probabilistic defense
against these kinds of "type confusion" attacks, including for fixed
same-size heap objects, we can create a complementary deterministic
defense for dynamically sized allocations that are directly user
controlled. Addressing these cases is limited in scope, so isolating these
kinds of interfaces will not become an unbounded game of whack-a-mole. For
example, many pass through memdup_user(), making isolation there very
effective.
In order to isolate user-controllable dynamically-sized
allocations from the common system kmalloc allocations, introduce
kmem_buckets_create(), which behaves like kmem_cache_create(). Introduce
kmem_buckets_alloc(), which behaves like kmem_cache_alloc(). Introduce
kmem_buckets_alloc_track_caller() for where caller tracking is
needed. Introduce kmem_buckets_valloc() for cases where vmalloc fallback
is needed. Note that these caches are specifically flagged with
SLAB_NO_MERGE, since merging would defeat the entire purpose of the
mitigation.
This can also be used in the future to extend allocation profiling's use
of code tagging to implement per-caller allocation cache isolation[1]
even for dynamic allocations.
Memory allocation pinning[2] is still needed to plug the Use-After-Free
cross-allocator weakness (where attackers can arrange to free an
entire slab page and have it reallocated to a different cache),
but that is an existing and separate issue which is complementary
to this improvement. Development continues for that feature via the
SLAB_VIRTUAL[3] series (which could also provide guard pages -- another
complementary improvement).
Link: https://lore.kernel.org/lkml/202402211449.401382D2AF@keescook [1]
Link: https://googleprojectzero.blogspot.com/2021/10/how-simple-linux-kernel-memory.html [2]
Link: https://lore.kernel.org/lkml/20230915105933.495735-1-matteorizzo@google.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Plumb kmem_buckets arguments through kvmalloc_node_noprof() so it is
possible to provide an API to perform kvmalloc-style allocations with
a particular set of buckets. Introduce kvmalloc_buckets_node() that takes a
kmem_buckets argument.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Encapsulate the concept of a single set of kmem_caches that are used
for the kmalloc size buckets. Redefine kmalloc_caches as an array
of these buckets (for the different global cache buckets).
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Slab allocators have been guaranteeing natural alignment for
power-of-two sizes since commit 59bb47985c1d ("mm, sl[aou]b: guarantee
natural alignment for kmalloc(power-of-two)"), while any other sizes are
guaranteed to be aligned only to ARCH_KMALLOC_MINALIGN bytes (although
in practice are aligned more than that in non-debug scenarios).
Rust's allocator API specifies size and alignment per allocation, which
have to satisfy the following rules, per Alice Ryhl [1]:
1. The alignment is a power of two.
2. The size is non-zero.
3. When you round up the size to the next multiple of the alignment,
then it must not overflow the signed type isize / ssize_t.
In order to map this to kmalloc()'s guarantees, some requested
allocation sizes have to be padded to the next power-of-two size [2].
For example, an allocation of size 96 and alignment of 32 will be padded
to an allocation of size 128, because the existing kmalloc-96 bucket
doesn't guarantee alignent above ARCH_KMALLOC_MINALIGN. Without slab
debugging active, the layout of the kmalloc-96 slabs however naturally
align the objects to 32 bytes, so extending the size to 128 bytes is
wasteful.
To improve the situation we can extend the kmalloc() alignment
guarantees in a way that
1) doesn't change the current slab layout (and thus does not increase
internal fragmentation) when slab debugging is not active
2) reduces waste in the Rust allocator use case
3) is a superset of the current guarantee for power-of-two sizes.
The extended guarantee is that alignment is at least the largest
power-of-two divisor of the requested size. For power-of-two sizes the
largest divisor is the size itself, but let's keep this case documented
separately for clarity.
For current kmalloc size buckets, it means kmalloc-96 will guarantee
alignment of 32 bytes and kmalloc-196 will guarantee 64 bytes.
This covers the rules 1 and 2 above of Rust's API as long as the size is
a multiple of the alignment. The Rust layer should now only need to
round up the size to the next multiple if it isn't, while enforcing the
rule 3.
Implementation-wise, this changes the alignment calculation in
create_boot_cache(). While at it also do the calulation only for caches
with the SLAB_KMALLOC flag, because the function is also used to create
the initial kmem_cache and kmem_cache_node caches, where no alignment
guarantee is necessary.
In the Rust allocator's krealloc_aligned(), remove the code that padded
sizes to the next power of two (suggested by Alice Ryhl) as it's no
longer necessary with the new guarantees.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/all/CAH5fLggjrbdUuT-H-5vbQfMazjRDpp2%2Bk3%3DYhPyS17ezEqxwcw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAH5fLghsZRemYUwVvhk77o6y1foqnCeDzW4WZv6ScEWna2+_jw@mail.gmail.com/ [2]
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Export fscache_put_volume() and add fscache_try_get_volume()
helper function to allow cachefiles to get/put fscache_volume
via linux/fscache-cache.h.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240628062930.2467993-2-libaokun@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On CONFIG_SMP=y and on 32bit we need to decrease DNAME_INLINE_LEN to 36
btyes to end up with 128 bytes in total.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Links: https://lore.kernel.org/r/CAHk-=whtoqTSCcAvV-X-KPqoDWxS4vxmWpuKLB+Vv8=FtUd5vA@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Stock kernel scales worse than FreeBSD when doing a 20-way stat(2) on
the same tmpfs-backed file.
According to perf top:
38.09% lockref_put_return
26.08% lockref_get_not_dead
25.60% __d_lookup_rcu
0.89% clear_bhb_loop
__d_lookup_rcu is participating in cacheline ping pong due to the
embedded name sharing a cacheline with lockref.
Moving it out resolves the problem:
41.50% lockref_put_return
41.03% lockref_get_not_dead
1.54% clear_bhb_loop
benchmark (will-it-scale, Sapphire Rapids, tmpfs, ops/s):
FreeBSD:7219334
before: 5038006
after: 7842883 (+55%)
One minor remark: the 'after' result is unstable, fluctuating in the
range ~7.8 mln to ~9 mln during different runs.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240613001215.648829-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Abstract the memory type from the page_pool so we can later add support
for new memory types. Convert the page_pool to use the new netmem type
abstraction, rather than use struct page directly.
As of this patch the netmem type is a no-op abstraction: it's always a
struct page underneath. All the page pool internals are converted to
use struct netmem instead of struct page, and the page pool now exports
2 APIs:
1. The existing struct page API.
2. The new struct netmem API.
Keeping the existing API is transitional; we do not want to refactor all
the current drivers using the page pool at once.
The netmem abstraction is currently a no-op. The page_pool uses
page_to_netmem() to convert allocated pages to netmem, and uses
netmem_to_page() to convert the netmem back to pages to pass to mm APIs,
Follow up patches to this series add non-paged netmem support to the
page_pool. This change is factored out on its own to limit the code
churn to this 1 patch, for ease of code review.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20240628003253.1694510-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxl_event_common was an unfortunate naming choice and caused confusion with
the existing Common Event Record. Furthermore, its fields didn't map all
the common information between DRAM and General Media Events.
Remove cxl_event_common and introduce cxl_event_media_hdr to record common
information between DRAM and General Media events.
cxl_event_media_hdr, which is embedded in both cxl_event_gen_media and
cxl_event_dram, leverages the commonalities between the two events to
simplify their respective handling.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240607144423.48681-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
When SNC is enabled, monitoring data is collected at the SNC node granularity,
but must be reported at L3-cache granularity for backwards compatibility in
addition to reporting at the node level.
Add a "ci" field to the rdt_mon_domain structure to save the cache information
about the enclosing L3 cache for the domain. This provides:
1) The cache id which is needed to compose the name of the legacy monitoring
directory, and to determine which domains should be summed to provide
L3-scoped data.
2) The shared_cpu_map which is needed to determine which CPUs can be used to
read the RMID counters with the MSR interface.
This is the first step to an eventual goal of monitor reporting files like this
(for a system with two SNC nodes per L3):
$ cd /sys/fs/resctrl/mon_data
$ tree mon_L3_00
mon_L3_00 <- 00 here is L3 cache id
├── llc_occupancy \ These files provide legacy support
├── mbm_local_bytes > for non-SNC aware monitor apps
├── mbm_total_bytes / that expect data at L3 cache level
├── mon_sub_L3_00 <- 00 here is SNC node id
│ ├── llc_occupancy \ These files are finer grained
│ ├── mbm_local_bytes > data from each SNC node
│ └── mbm_total_bytes /
└── mon_sub_L3_01
├── llc_occupancy \
├── mbm_local_bytes > As above, but for node 1.
└── mbm_total_bytes /
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-9-tony.luck@intel.com
|
|
Currently supported resctrl features are all domain scoped the same as the
scope of the L2 or L3 caches.
Add RESCTRL_L3_NODE as a new option for features that are scoped at the
same granularity as NUMA nodes. This is needed for Intel's Sub-NUMA
Cluster (SNC) feature where monitoring features are divided between
nodes that share an L3 cache.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-6-tony.luck@intel.com
|
|
The same rdt_domain structure is used for both control and monitor
functions. But this results in wasted memory as some of the fields are
only used by control functions, while most are only used for monitor
functions.
Split into separate rdt_ctrl_domain and rdt_mon_domain structures with
just the fields required for control and monitoring respectively.
Similar split of the rdt_hw_domain structure into rdt_hw_ctrl_domain
and rdt_hw_mon_domain.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-5-tony.luck@intel.com
|
|
Resctrl assumes that control and monitor operations on a resource are
performed at the same scope.
Prepare for systems that use different scope (specifically Intel needs
to split the RDT_RESOURCE_L3 resource to use L3 scope for cache control
and NODE scope for cache occupancy and memory bandwidth monitoring).
Create separate domain lists for control and monitor operations.
Note that errors during initialization of either control or monitor
functions on a domain would previously result in that domain being
excluded from both control and monitor operations. Now the domains are
allocated independently it is no longer required to disable both control
and monitor operations if either fail.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-4-tony.luck@intel.com
|
|
The rdt_domain structure is used for both control and monitor features.
It is about to be split into separate structures for these two usages
because the scope for control and monitoring features for a resource
will be different for future resources.
To allow for common code that scans a list of domains looking for a
specific domain id, move all the common fields ("list", "id", "cpu_mask")
into their own structure within the rdt_domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-3-tony.luck@intel.com
|
|
Resctrl resources operate on subsets of CPUs in the system with the
defining attribute of each subset being an instance of a particular
level of cache. E.g. all CPUs sharing an L3 cache would be part of the
same domain.
In preparation for features that are scoped at the NUMA node level,
change the code from explicit references to "cache_level" to a more
generic scope. At this point the only options for this scope are groups
of CPUs that share an L2 cache or L3 cache.
Clean up the error handling when looking up domains. Report invalid ids
before calling rdt_find_domain() in preparation for better messages when
scope can be other than cache scope. This means that rdt_find_domain()
will never return an error. So remove checks for error from the call sites.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-2-tony.luck@intel.com
|
|
Fully document enum misc_res_type with kernel-doc comments to prevent
kernel-doc warnings:
misc_cgroup.h:12: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Types of misc cgroup entries supported by the host.
misc_cgroup.h:12: warning: missing initial short description on line:
* Types of misc cgroup entries supported by the host.
Fixes: a72232eabdfc ("cgroup: Add misc cgroup controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the Exynos USB 3.1 DRD combo phy, as found in Exynos 9
SoCs like Google GS101. It supports USB SS, HS and DisplayPort.
In terms of UTMI+, this is very similar to the existing Exynos850
support in this driver. The difference is that this combo phy supports
both UTMI+ (HS) and PIPE3 (SS). It also supports DP alt mode.
The number of ports for UTMI+ and PIPE3 can be determined using the
LINKPORT register (which also exists on Exynos E850).
For SuperSpeed (SS) a new SS phy is in use and its PIPE3 interface is
new compared to Exynos E850, and also very different from the existing
support for older Exynos SoCs in this driver.
The SS phy needs a bit more configuration work and register tuning for
signal quality to work reliably, presumably due to the higher
frequency, e.g. to account for different board layouts. Additionally,
power needs to be enabled before writing to the SS phy registers.
This commit adds the necessary changes for USB HS and SS to work.
DisplayPort is out of scope in this commit.
Notes:
* For the register tuning, exynos5_usbdrd_apply_phy_tunes() has been
added with the appropriate data structures to support tuning at
various stages during initialisation. Since these are hardware
specific, the platform data is supposed to be populated accordingly.
The implementation is loosely modelled after the Samsung UFS PHY
driver.
There is one tuning state for UTMI+, PTS_UTMI_POSTINIT, to execute
after init and generally intended for HS signal tuning, as done in
this commit.
PTS_PIPE3_PREINIT PTS_PIPE3_INIT PTS_PIPE3_POSTINIT
PTS_PIPE3_POSTLOCK are tuning states for PIPE3. In the downstream
driver, preinit differs by Exynos SoC, and postinit and postlock
are different per board. The latter haven't been implemented for
gs101 here, because downstream doesn't use them on gs101 either.
* Signal lock acquisition for SS depends on the orientation of the
USB-C plug. Since there currently is no infrastructure to chain
connector events to both the USB DWC3 driver and this phy driver, a
work-around has been added in
exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock() to check both
registers if it failed in one of the orientations.
* Equally, we can only establish SS speed in one of the connector
orientations due to programming differences when selecting the lane
mux in exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(), which really
needs to be dynamic, based on the orientation of the connector.
* As is, we can establish a HS link using any cable, and an SS link in
one orientation of the plug, falling back to HS if the orientation is
reversed to the expectation.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-6-b66de9ae7424@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, io_uring's io_sg_from_iter() duplicates the part of
__zerocopy_sg_from_iter() charging pages to the socket. It'd be too easy
to miss while changing it in net/, the chunk is not the most
straightforward for outside users and full of internal implementation
details. io_uring is not a good place to keep it, deduplicate it by
moving out of the callback into __zerocopy_sg_from_iter().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This function has been deprecated for some time and is now only used
within the GPIOLIB core. Remove it from the public header and unexport
it as all current users are linked against the compilation unit where
it is defined.
Link: https://lore.kernel.org/r/20240625073815.12376-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Multiple filesystems take uid and gid as options, and the code to
create the ID from an integer and validate it is standard boilerplate
that can be moved into common helper functions, so do that for
consistency and less cut&paste.
This also helps avoid the buggy pattern noted by Seth Jenkins at
https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com/
because uid/gid parsing will fail before any assignment in most
filesystems.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Link: https://lore.kernel.org/r/de859d0a-feb9-473d-a5e2-c195a3d47abb@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some users may be requiring only rather small numbers as both
numerator and denominator: add signed and unsigned 8 bits
structs {s8,u8}_fract.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ACPI battery driver can handle the "charge limiting" state
of the battery, so the platform can advertise this state.
Indicate this by setting bit 19 ("Battery Charge Limiting Support")
when evaluating _OSC.
Tested on a Lenovo Ideapad S145-14IWL.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20240620191410.3646-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"This fixes up a last minute build regression from the previous set of
bug fixes"
* tag 'asm-generic-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix sys_fanotify_mark prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Don't misleadingly warn during filesystem thaw operations.
It's possible that a block device which was frozen before it was
mounted can cause a failing thaw operation if someone concurrently
tried to mount it while that thaw operation was issued and the
device had already been temporarily claimed for the mount (The
mount will of course be aborted because the device is frozen).
netfs:
- Fix io_uring based write-through. Make sure that the total request
length is correctly set.
- Fix partial writes to folio tail.
- Remove some xarray helpers that were intended for bounce buffers
which got defered to a later patch series.
- Make netfs_page_mkwrite() whether folio->mapping is vallid after
acquiring the folio lock.
- Make netfs_page_mkrite() flush conflicting data instead of waiting.
fsnotify:
- Ensure that fsnotify creation events are generated before fsnotify
open events when a file is created via ->atomic_open(). The
ordering was broken before.
- Ensure that no fsnotify events are generated for O_PATH file
descriptors. While no fsnotify open events were generated, fsnotify
close events were. Make it consistent and don't produce any"
* tag 'vfs-6.10-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix netfs_page_mkwrite() to flush conflicting data, not wait
netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid
netfs: Delete some xarray-wangling functions that aren't used
netfs: Fix early issue of write op on partial write to folio tail
netfs: Fix io_uring based write-through
vfs: generate FS_CREATE before FS_OPEN when ->atomic_open used.
fsnotify: Do not generate events for O_PATH file descriptors
fs: don't misleadingly warn during thaw operations
|
|
Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Retrieving the supported versions of a command is a fairly common
operation. Provide a helper for it.
If the command is not supported at all the EC returns
-EINVAL/EC_RES_INVALID_PARAMS.
This error is translated into an empty version mask as that is easier to
handle for callers and they don't need to know about the error details.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-3-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The charge-control command v2/v3 is more featureful than v1, it
additionally supports charge thresholds.
The definitions were imported from ChromeOS EC commit
32870d602317 ("squirtle: modify motionsense rotation matrix")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-2-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
My earlier fix missed an incorrect function prototype that shows up on
native 32-bit builds:
In file included from fs/notify/fanotify/fanotify_user.c:14:
include/linux/syscalls.h:248:25: error: conflicting types for 'sys_fanotify_mark'; have 'long int(int, unsigned int, u32, u32, int, const char *)' {aka 'long int(int, unsigned int, unsigned int, unsigned int, int, const char *)'}
1924 | SYSCALL32_DEFINE6(fanotify_mark,
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:862:17: note: previous declaration of 'sys_fanotify_mark' with type 'long int(int, unsigned int, u64, int, const char *)' {aka 'long int(int, unsigned int, long long unsigned int, int, const char *)'}
On x86 and powerpc, the prototype is also wrong but hidden in an #ifdef,
so it never caused problems.
Add another alternative declaration that matches the conditional function
definition.
Fixes: 403f17a33073 ("parisc: use generic sys_fanotify_mark implementation")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We had the following errors while doing make htmldocs:
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:167:
ERROR: Unexpected indentation.
Also ensure consistency with the rest of the __u64 vs u64.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report")
Link: https://patch.msgid.link/20240701-fix-cki-v2-4-20564e2e1393@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We had the following errors while doing make htmldocs:
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:144:
ERROR: Unexpected indentation.
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:145:
WARNING: Block quote ends without a blank line;
unexpected unindent.
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:147:
ERROR: Unexpected indentation.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Link: https://patch.msgid.link/20240701-fix-cki-v2-3-20564e2e1393@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
I've got multiple reports of:
error: cast from pointer to integer of different size
[-Werror=pointer-to-int-cast].
Let's use the same trick than kernel/bpf/helpers.c to shut up that warning.
Even if we were on an architecture with addresses on more than 64 bits,
this isn't much of an issue as the address is not used as a pointer,
but as an hash and the caller is not supposed to go back to the kernel
address ever.
And while we change those, make sure we use u64 instead of __u64 for
consistency
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406280633.OPB5uIFj-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406282304.UydSVncq-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406282242.Fk738zzy-lkp@intel.com/
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Fixes: 67eccf151d76 ("HID: add source argument to HID low level functions")
Link: https://patch.msgid.link/20240701-fix-cki-v2-2-20564e2e1393@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Supports per-plane port counters by querying PPCNT register with the
"extended port counters" group, as the query_vport_counter command
doesn't support plane ports.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/06ffb582d67159b7def4654c8272d3d6e8bd2f2f.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This patch adds new fields to support multi-plane and the extend port
counters group. Actual support will be added in the next patch.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/70221cdd79aad0e21cbf385d9567e3ebffbc5137.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Support the new "plane_ind" field when querying port PTYS registers.
This is needed when querying the rate of a plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/1f703c36306aa46917fcd88eadbb23b3e380d526.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This resolves the merge issues in the 8250 code due to some reverts in
6.10-rc6 in the console changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When multi-plane is supported, a logical port, which is aggregation of
multiple physical plane ports, is exposed for data transmission.
Compared with a normal mlx5 IB port, this logical port supports all
functionalities except Subnet Management.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/7e37c06c9cb243be9ac79930cd17053903785b95.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add new fields to support mlx5 multi-plane feature. Actual support will
be added in following patches.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/36a74a1b1d2b7b59c99cda4abad1794ddde30230.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
We need the USB fixes in here as well for some follow-on patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char/misc/iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It has been seen that for some network mac drivers (i.e. lan78xx) the
related module for the phy is loaded dynamically depending on the current
hardware. In this case, the associated phy is read using mdio bus and then
the associated phy module is loaded during runtime (kernel function
phy_request_driver_module). However, no software dependency is defined, so
the user tools will no be able to get this dependency. For example, if
dracut is used and the hardware is present, lan78xx will be included but no
phy module will be added, and in the next restart the device will not work
from boot because no related phy will be found during initramfs stage.
In order to solve this, we could define a normal 'pre' software dependency
in lan78xx module with all the possible phy modules (there may be some),
but proceeding in that way, all the possible phy modules would be loaded
while only one is necessary.
The idea is to create a new type of dependency, that we are going to call
'weak' to be used only by the user tools that need to detect this situation.
In that way, for example, dracut could check the 'weak' dependency of the
modules involved in order to install these dependencies in initramfs too.
That is, for the commented lan78xx module, defining the 'weak' dependency
with the possible phy modules list, only the necessary phy would be loaded
on demand keeping the same behavior, but all the possible phy modules would
be available from initramfs.
The 'weak' dependency support has been included in kmod:
https://github.com/kmod-project/kmod/commit/05828b4a6e9327a63ef94df544a042b5e9ce4fe7
But, take into account that this can only be used if depmod is new enough.
If it isn't, depmod will have the same behavior as always (keeping backward
compatibility) and the information for the 'weak' dependency will not be
provided.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
