| Age | Commit message (Collapse) | Author |
|---|
|
Upon NOCB deoffloading, the rcuo kthread must be forced to sleep
until the corresponding rdp is ever offloaded again. The deoffloader
clears the SEGCBLIST_OFFLOADED flag, wakes up the rcuo kthread which
then notices that change and clears in turn its SEGCBLIST_KTHREAD_CB
flag before going to sleep, until it ever sees the SEGCBLIST_OFFLOADED
flag again, should a re-offloading happen.
Upon NOCB offloading, the rcuo kthread must be forced to wake up and
handle callbacks until the corresponding rdp is ever deoffloaded again.
The offloader sets the SEGCBLIST_OFFLOADED flag, wakes up the rcuo
kthread which then notices that change and sets in turn its
SEGCBLIST_KTHREAD_CB flag before going to check callbacks, until it
ever sees the SEGCBLIST_OFFLOADED flag cleared again, should a
de-offloading happen again.
This is all a crude ad-hoc and error-prone kthread (un-)parking
re-implementation.
Consolidate the behaviour with the appropriate API instead.
[ paulmck: Apply Qiang Zhang feedback provided in Link: below. ]
Link: https://lore.kernel.org/all/20240509074046.15629-1-qiang.zhang1211@gmail.com/
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The (de-)offloading process used to take care about the NOCB timer when
it depended on the per-rdp NOCB locking. However this isn't the case
anymore for a long while. It can now safely be armed and run during the
(de-)offloading process, which doesn't care about it anymore.
Update the comments accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The parts explaining the bypass lifecycle in (de-)offloading are out
of date and/or wrong. Bypass is simply enabled whenever SEGCBLIST_RCU_CORE
flag is off.
Fix the comments accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is no direct RCU counterpart to lockdep_assert_irqs_disabled()
and friends. Although it is possible to construct them, it would
be more convenient to have the following lockdep assertions:
lockdep_assert_in_rcu_read_lock()
lockdep_assert_in_rcu_read_lock_bh()
lockdep_assert_in_rcu_read_lock_sched()
lockdep_assert_in_rcu_reader()
This commit therefore creates them.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The current security_inode_setxattr() and security_inode_removexattr()
hooks rely on individual LSMs to either call into the associated
capability hooks (cap_inode_setxattr() or cap_inode_removexattr()), or
return a magic value of 1 to indicate that the LSM layer itself should
perform the capability checks. Unfortunately, with the default return
value for these LSM hooks being 0, an individual LSM hook returning a
1 will cause the LSM hook processing to exit early, potentially
skipping a LSM. Thankfully, with the exception of the BPF LSM, none
of the LSMs which currently register inode xattr hooks should end up
returning a value of 1, and in the BPF LSM case, with the BPF LSM hooks
executing last there should be no real harm in stopping processing of
the LSM hooks. However, the reliance on the individual LSMs to either
call the capability hooks themselves, or signal the LSM with a return
value of 1, is fragile and relies on a specific set of LSMs being
enabled. This patch is an effort to resolve, or minimize, these
issues.
Before we discuss the solution, there are a few observations and
considerations that we need to take into account:
* BPF LSM registers an implementation for every LSM hook, and that
implementation simply returns the hook's default return value, a
0 in this case. We want to ensure that the default BPF LSM behavior
results in the capability checks being called.
* SELinux and Smack do not expect the traditional capability checks
to be applied to the xattrs that they "own".
* SELinux and Smack are currently written in such a way that the
xattr capability checks happen before any additional LSM specific
access control checks. SELinux does apply SELinux specific access
controls to all xattrs, even those not "owned" by SELinux.
* IMA and EVM also register xattr hooks but assume that the LSM layer
and specific LSMs have already authorized the basic xattr operation.
In order to ensure we perform the capability based access controls
before the individual LSM access controls, perform only one capability
access control check for each operation, and clarify the logic around
applying the capability controls, we need a mechanism to determine if
any of the enabled LSMs "own" a particular xattr and want to take
responsibility for controlling access to that xattr. The solution in
this patch is to create a new LSM hook, 'inode_xattr_skipcap', that is
not exported to the rest of the kernel via a security_XXX() function,
but is used by the LSM layer to determine if a LSM wants to control
access to a given xattr and avoid the traditional capability controls.
Registering an inode_xattr_skipcap hook is optional, if a LSM declines
to register an implementation, or uses an implementation that simply
returns the default value (0), there is no effect as the LSM continues
to enforce the capability based controls (unless another LSM takes
ownership of the xattr). If none of the LSMs signal that the
capability checks should be skipped, the capability check is performed
and if access is granted the individual LSM xattr access control hooks
are executed, keeping with the DAC-before-LSM convention.
Cc: stable@vger.kernel.org
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
|
|
After
faf01aef0570 ("KVM: PPC: Merge powerpc's debugfs entry content into generic entry")
kvm_debugfs_dir is not used anywhere else outside of kvm_main.c
Unexport it and make it static.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240515150804.9354-1-bp@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename console_replay_all() to console_try_replay_all() to make
clear that the implementation is best effort. Also, the function
should not be called in NMI context as it takes locks, so update
the comment in code.
Fixes: 693f75b91a91 ("printk: Add function to replay kernel log on consoles")
Fixes: 1b743485e27f ("tty/sysrq: Replay kernel log messages on consoles via sysrq")
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shimoyashiki Taichi <taichi.shimoyashiki@sony.com>
Signed-off-by: Sreenath Vijayan <sreenath.vijayan@sony.com>
Link: https://lore.kernel.org/r/Zlguq/wU21Z8MqI4@sreenath.vijayan@sony.com
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
In a future commit the proc_handlers themselves will change to
"const struct ctl_table". As a preparation for that adapt the internal
helper.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
The ACE3 IP used in PantherLake exposes new bitfields in the ACTMCTL
register to better control clocks/delays. These bitfields were
reserved/zero in the ACE2.x IP, to simplify the integration the new
bifields are added unconditionally. The behavior will only be impacted
when the firmware exposes DSD properties to set non-zero values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603070240.5165-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The notion of stream is by construction based on a multi-bus
capability, to allow for aggregation of Peripheral devices or
functions located on different segments. We currently count how many
master_rt contexts are used by a stream, but we don't have the dual
refcount of how many streams are allocated on a given bus. This
refcount will be useful to check if BTP/BRA streams can be allocated.
Note that the stream_refcount is modified in sdw_master_rt_alloc() and
sdw_master_rt_free() which are both called with the bus_lock mutex
held, so there's no need for refcount_ primitives for additional
protection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603065841.4860-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need these to get the i.MX8 boards working in CI again.
|
|
We need these to get the i.MX8 boards working in CI again.
|
|
Move FIRMWARE_VERSION_MASK macro to xlnx-zynqmp.h so that other
drivers can use it for verifying the supported firmware version.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240425095913.919390-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Add support to register subsystem restart events from firmware for Versal
and Versal NET platforms. This event is received when firmware requests
for subsystem restart. After receiving this event, the kernel needs to be
restarted.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20240424124900.29287-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
PPS (Pulse Per Second) generates a hardware pulse every second based on
CLOCK_REALTIME. This works fine when the pulse is generated in software
from a hrtimer callback function.
For hardware which generates the pulse by programming a timer it is
required to convert CLOCK_REALTIME to the underlying hardware clock.
The X86 Timed IO device is based on the Always Running Timer (ART), which
is the base clock of the TSC, which is usually the system clocksource on
X86.
The core code already has functionality to convert base clock timestamps to
system clocksource timestamps, but there is no support for converting the
other way around.
Provide the required functionality to support such devices in a generic
way to avoid code duplication in drivers:
1) ktime_real_to_base_clock() to convert a CLOCK_REALTIME timestamp to a
base clock timestamp
2) timekeeping_clocksource_has_base() to allow drivers to validate that
the system clocksource is based on a particular clocksource ID.
[ tglx: Simplify timekeeping_clocksource_has_base() and add missing READ_ONCE() ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-10-lakshmi.sowjanya.d@intel.com
|
|
The core code provides a new mechanism to allow conversion between ART and
TSC. This allows to replace the x86 specific ART/TSC conversion functions.
Prepare for removal by filling in the base clock conversion information for
ART and associating the base clock to the TSC clocksource.
The existing conversion functions will be removed once the usage sites are
converted over to the new model.
[ tglx: Massaged change log ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-3-lakshmi.sowjanya.d@intel.com
|
|
Hardware time stamps like provided by PTP clock implementations are based
on a clock which feeds both the PCIe device and the system clock. For
further processing the underlying hardwarre clock timestamp must be
converted to the system clock.
Right now this requires drivers to invoke an architecture specific
conversion function, e.g. to convert the ART (Always Running Timer)
timestamp to a TSC timestamp.
As the system clock is aware of the underlying base clock, this can be
moved to the core code by providing a base clock property for the system
clock which contains the conversion factors and assigning a clocksource ID
to the base clock.
Add the required data structures and the conversion infrastructure in the
core code to prepare for converting X86 and the related PTP drivers over.
[ tglx: Added a missing READ_ONCE(). Massaged change log ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-2-lakshmi.sowjanya.d@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Removed the SPD class of i2c devices from the device core.
Additionally, a cleanup in the Synquacer code removes the pclk
from the global structure, as it is used only in the probe.
Therefore, it is now declared locally.
|
|
To read from the EC memory different mechanism are possible.
ECs connected via LPC expose their memory via a ->cmd_readmem operation.
Other protocols require the usage of EC_CMD_READ_MEMMAP, which on the
other hand is not implemented by LPC ECs.
Provide a helper that automatically selects the correct mechanism.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-1-5cdf0c5db50a@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Either 5 different LED triggers are registered for battery power-supply
devices or a single online LED trigger is used for non battery power-supply
devices.
These 5 / 1 LED trigger(s) are never used at the same time. So there is
no need for a separate LED trigger pointer for the online trigger. Rename
the first battery trigger from charging_full_trig to just trig and use this
for the online trigger too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531134702.166145-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add power_supply_[un]register_led_trigger() helper functions.
The primary goal of this is as a preparation patch for adding an activate
callback to the power-supply LED triggers to ensure that power-supply
LEDs get the correct initial value when the LED gets registered after
the power_supply has been registered (this will use the psy back pointer).
There also is quite a lot of code duplication in the existing LED trigger
registration in the form of the kasprintf() for the name-template for each
trigger + related error handling. This duplication is removed by these
new helpers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531134702.166145-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Until SM8450, there was only one broadcast region (Broadcast_OR)
used to broadcast write and check for status bit 0.
>From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1. This hasn't been updated and
Broadcast_OR region was wrongly being used to check for status bit 1 all
along.
Hence define new regmap structure for Broadcast_AND region and initialize
this regmap when HW block version is greater than 4.1, otherwise
initialize as a NULL pointer for backwards compatibility.
Switch from broadcast_OR to broadcast_AND region (when defined in DT)
for checking status bit 1 as Broadcast_OR region checks only for bit 0.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/9cf19928a67eaa577ae0f02de5bf86276be34ea2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- Removing unused fields (Kanchan)
- Large folio offsets support (Kundan)
- Multipath NUMA node initialiazation fix (Nilay)
- Multipath IO stats accounting fixes (Keith)
- Circular lockdep fix (Keith)
- Target race condition fix (Sagi)
- Target memory leak fix (Sagi)
- bcache fixes
- null_blk fixes (Damien)
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
|
|
With the vfio device fd tied to the address space of the pseudo fs
inode, we can use the mm to track all vmas that might be mmap'ing
device BARs, which removes our vma_list and all the complicated lock
ordering necessary to manually zap each related vma.
Note that we can no longer store the pfn in vm_pgoff if we want to use
unmap_mapping_range() to zap a selective portion of the device fd
corresponding to BAR mappings.
This also converts our mmap fault handler to use vmf_insert_pfn()
because we no longer have a vma_list to avoid the concurrency problem
with io_remap_pfn_range(). The goal is to eventually use the vm_ops
huge_fault handler to avoid the additional faulting overhead, but
vmf_insert_pfn_{pmd,pud}() need to learn about pfnmaps first.
Also, Jason notes that a race exists between unmap_mapping_range() and
the fops mmap callback if we were to call io_remap_pfn_range() to
populate the vma on mmap. Specifically, mmap_region() does call_mmap()
before it does vma_link_file() which gives a window where the vma is
populated but invisible to unmap_mapping_range().
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240530045236.1005864-3-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
By linking all the device fds we provide to userspace to an
address space through a new pseudo fs, we can use tools like
unmap_mapping_range() to zap all vmas associated with a device.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240530045236.1005864-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark a few more folio functions as taking a const folio pointer, which
allows us to remove a few places in slab which cast away the const.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add new API to get the debugfs root directory for TPMI. This allows any
TPMI devices to add their own debugfs items under the same directory
structure.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-3-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TPMI ID 0x0C (Perf Limit Reasons) to the list of supported TPMI IDs.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Link: https://lore.kernel.org/r/20240527133400.483634-2-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
RGB LED
Add a charging_orange_full_green LED trigger and the trigger is based on
led_mc_trigger_event() which can set an RGB LED when the trigger is
triggered. The LED will show orange when the battery status is charging.
The LED will show green when the battery status is full.
Link: https://lore.kernel.org/linux-leds/f40a0b1a-ceac-e269-c2dd-0158c5b4a1ad@gmail.com/
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[hdegoede@redhat.com change color order to RGB]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-7-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a new led_mc_trigger_event() function for triggers which want to
change the color of a multi-color LED based on their trigger conditions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-6-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a new led_mc_set_brightness() function for in kernel color/brightness
changing of multi-color LEDs.
led-class-multicolor can be build as a module and led_mc_set_brightness()
will have the builtin callers, so put led_mc_set_brightness() inside
led-core instead, just like how led_set_brightness() is part of the core
and not of the led-class object.
This also adds a new LED_MULTI_COLOR led_classdev flag to allow
led_mc_set_brightness() to verify that it is operating on a multi-color
LED classdev, avoiding casting the passed in LED classdev to a multi-color
LED classdev, when it actually is not a multi-color LED.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-5-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Rename xpcs_an_inband to default_an_inband to reflect the change in
phylink and its changed functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/E1sCJN6-00EcrD-43@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since ovr_an_inband no longer overrides every MLO_AN_xxx mode, rename
it to reflect what it now does - it changes the default mode from
MLO_AN_PHY to MLO_AN_INBAND. Fix up the two users of this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/E1sCJMv-00Ecr1-Sk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpf_link_inc_not_zero() will be used by kernel modules. We will use it in
bpf_testmod.c later.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add epoll support to bpf struct_ops links to trigger EPOLLHUP event upon
detachment.
This patch implements the "poll" of the "struct file_operations" for BPF
links and introduces a new "poll" operator in the "struct bpf_link_ops". By
implementing "poll" of "struct bpf_link_ops" for the links of struct_ops,
the file descriptor of a struct_ops link can be added to an epoll file
descriptor to receive EPOLLHUP events.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pass an additional pointer of bpf_struct_ops_link to callback function reg,
unreg, and update provided by subsystems defined in bpf_struct_ops. A
bpf_struct_ops_map can be registered for multiple links. Passing a pointer
of bpf_struct_ops_link helps subsystems to distinguish them.
This pointer will be used in the later patches to let the subsystem
initiate a detachment on a link that was registered to it previously.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Although the data_race() kerneldoc header accurately states what it does,
some of the implications and usage patterns are non-obvious. Therefore,
add a brief locking example and also state how to have KCSAN ignore
accesses while also preventing the compiler from folding, spindling,
or otherwise mutilating the access.
[ paulmck: Apply Bart Van Assche feedback. ]
[ paulmck: Apply feedback from Marco Elver. ]
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Jens Axboe <axboe@kernel.dk>
|
|
A zoned device may have a last sequential write required zone that is
smaller than other zones. However, all tests to check if a zone write
plug write offset exceeds the zone capacity use the same capacity
value stored in the gendisk zone_capacity field. This is incorrect for a
zoned device with a last runt (smaller) zone.
Add the new field last_zone_capacity to struct gendisk to store the
capacity of the last zone of the device. blk_revalidate_seq_zone() and
blk_revalidate_conv_zone() are both modified to get this value when
disk_zone_is_last() returns true. Similarly to zone_capacity, the value
is first stored using the last_zone_capacity field of struct
blk_revalidate_zone_args. Once zone revalidation of all zones is done,
this is used to set the gendisk last_zone_capacity field.
The checks to determine if a zone is full or if a sector offset in a
zone exceeds the zone capacity in disk_should_remove_zone_wplug(),
disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(),
and blk_zone_wplug_prepare_bio() are modified to use the new helper
functions disk_zone_is_full() and disk_zone_wplug_is_full().
disk_zone_is_full() uses the zone index to determine if the zone being
tested is the last one of the disk and uses the either the disk
zone_capacity or last_zone_capacity accordingly.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240530054035.491497-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
|
|
The register address of the XLCDC IP used in SAM9X7 SoC family
are different from the previous HLCDC. Defining those address
space with valid macros.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
[manikandan.m@microchip.com: Remove unused macro definitions]
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240424053351.589830-3-manikandan.m@microchip.com
|
|
Add qcom_smem_bust_hwspin_lock_by_host to enable remoteproc to bust the
hwspin_lock owned by smem. In the event the remoteproc crashes
unexpectedly, the remoteproc driver can invoke this API to try and bust
the hwspin_lock and release the lock if still held by the remoteproc
device.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-3-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull in remaining commits from 6.10/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pnp_bus_type is defined only when CONFIG_PNP=y, while being
not guarded by ifdeffery in the header. Moreover, it's not used
outside of the PNP code. Move it to the internal header to make
sure no-one will try to (ab)use it.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since we have a dev_is_pnp() macro that utilises the address of the
pnp_bus_type variable, the users, which can be compiled as modules,
will fail to build. Convert the macro to be a function and export it
to the modules to prevent build breakage.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/cc8a93b2-2504-9754-e26c-5d5c3bd1265c@gmail.com
Fixes: 2a49b45cd0e7 ("PNP: Add dev_is_pnp() macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PCI bridge window logic needs to find out in advance to the actual
allocation if there is an empty space big enough to fit the window.
Export find_resource_space() for the purpose. Also move the struct
resource_constraint into generic header to be able to use the new
interface.
Link: https://lore.kernel.org/r/20240507102523.57320-7-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To make it simpler to declare resource constraint alignf callbacks, add
typedef for it and document it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240507102523.57320-5-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
