| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds uptr support in the map_value of the task local storage.
struct map_value {
struct user_data __uptr *uptr;
};
struct {
__uint(type, BPF_MAP_TYPE_TASK_STORAGE);
__uint(map_flags, BPF_F_NO_PREALLOC);
__type(key, int);
__type(value, struct value_type);
} datamap SEC(".maps");
A new bpf_obj_pin_uptrs() is added to pin the user page and
also stores the kernel address back to the uptr for the
bpf prog to use later. It currently does not support
the uptr pointing to a user struct across two pages.
It also excludes PageHighMem support to keep it simple.
As of now, the 32bit bpf jit is missing other more crucial bpf
features. For example, many important bpf features depend on
bpf kfunc now but so far only one arch (x86-32) supports it
which was added by me as an example when kfunc was first
introduced to bpf.
The uptr can only be stored to the task local storage by the
syscall update_elem. Meaning the uptr will not be considered
if it is provided by the bpf prog through
bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE).
This is enforced by only calling
bpf_local_storage_update(swap_uptrs==true) in
bpf_pid_task_storage_update_elem. Everywhere else will
have swap_uptrs==false.
This will pump down to bpf_selem_alloc(swap_uptrs==true). It is
the only case that bpf_selem_alloc() will take the uptr value when
updating the newly allocated selem. bpf_obj_swap_uptrs() is added
to swap the uptr between the SDATA(selem)->data and the user provided
map_value in "void *value". bpf_obj_swap_uptrs() makes the
SDATA(selem)->data takes the ownership of the uptr and the user space
provided map_value will have NULL in the uptr.
The bpf_obj_unpin_uptrs() is called after map->ops->map_update_elem()
returning error. If the map->ops->map_update_elem has reached
a state that the local storage has taken the uptr ownership,
the bpf_obj_unpin_uptrs() will be a no op because the uptr
is NULL. A "__"bpf_obj_unpin_uptrs is added to make this
error path unpin easier such that it does not have to check
the map->record is NULL or not.
BPF_F_LOCK is not supported when the map_value has uptr.
This can be revisited later if there is a use case. A similar
swap_uptrs idea can be considered.
The final bit is to do unpin_user_page in the bpf_obj_free_fields().
The earlier patch has ensured that the bpf_obj_free_fields() has
gone through the rcu gp when needed.
Cc: linux-mm@kvack.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241023234759.860539-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a later patch, bpf_selem_free() will call unpin_user_page()
through bpf_obj_free_fields(). unpin_user_page() may take spin_lock.
However, some bpf_selem_free() call paths have held a raw_spin_lock.
Like this:
raw_spin_lock_irqsave()
bpf_selem_unlink_storage_nolock()
bpf_selem_free()
unpin_user_page()
spin_lock()
To avoid spinlock nested in raw_spinlock, bpf_selem_free() should be
done after releasing the raw_spinlock. The "bool reuse_now" arg is
replaced with "struct hlist_head *free_selem_list" in
bpf_selem_unlink_storage_nolock(). The bpf_selem_unlink_storage_nolock()
will append the to-be-free selem at the free_selem_list. The caller of
bpf_selem_unlink_storage_nolock() will need to call the new
bpf_selem_free_list(free_selem_list, reuse_now) to free the selem
after releasing the raw_spinlock.
Note that the selem->snode cannot be reused for linking to
the free_selem_list because the selem->snode is protected by the
raw_spinlock that we want to avoid holding. A new
"struct hlist_node free_node;" is union-ized with
the rcu_head. Only the first one successfully
hlist_del_init_rcu(&selem->snode) will be able
to use the free_node. After succeeding hlist_del_init_rcu(&selem->snode),
the free_node and rcu_head usage is serialized such that they
can share the 16 bytes in a union.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_selem_alloc()
In a later patch, the task local storage will only accept uptr
from the syscall update_elem and will not accept uptr from
the bpf prog. The reason is the bpf prog does not have a way
to provide a valid user space address.
bpf_local_storage_update() and bpf_selem_alloc() are used by
both bpf prog bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE)
and bpf syscall update_elem. "bool swap_uptrs" arg is added
to bpf_local_storage_update() and bpf_selem_alloc() to tell if
it is called by the bpf prog or by the bpf syscall. When
swap_uptrs==true, it is called by the syscall.
The arg is named (swap_)uptrs because the later patch will swap
the uptrs between the newly allocated selem and the user space
provided map_value. It will make error handling easier in case
map->ops->map_update_elem() fails and the caller can decide
if it needs to unpin the uptr in the user space provided
map_value or the bpf_local_storage_update() has already
taken the uptr ownership and will take care of unpinning it also.
Only swap_uptrs==false is passed now. The logic to handle
the true case will be added in a later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch introduces the "__uptr" type tag to BTF. It is to define
a pointer pointing to the user space memory. This patch adds BTF
logic to pass the "__uptr" type tag.
btf_find_kptr() is reused for the "__uptr" tag. The "__uptr" will only
be supported in the map_value of the task storage map. However,
btf_parse_struct_meta() also uses btf_find_kptr() but it is not
interested in "__uptr". This patch adds a "field_mask" argument
to btf_find_kptr() which will return BTF_FIELD_IGNORE if the
caller is not interested in a “__uptr” field.
btf_parse_kptr() is also reused to parse the uptr.
The btf_check_and_fixup_fields() is changed to do extra
checks on the uptr to ensure that its struct size is not larger
than PAGE_SIZE. It is not clear how a uptr pointing to a CO-RE
supported kernel struct will be used, so it is also not allowed now.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
|
|
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add and use a special guard for cooling devices.
This allows quite a few error code paths to be simplified among
other things and brings in code size reduction for a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5837621.DvuYhMxLoT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Embed UHS-II access/control functionality into the MMC request
processing flow.
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com>
[Ulf: A couple of cleanups and fixed sd_uhs2_power_off()]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
spin_trylock_irqsave() has a __cond_lock() wrapper which points to
__spin_trylock_irqsave(). The function then invokes spin_trylock() which
has another __cond_lock() finally pointing to rt_spin_trylock().
The compiler has no problem to parse this but sparse does not recognise
that users of spin_trylock_irqsave() acquire a conditional lock and
complains.
Remove one layer of __cond_lock() so that sparse recognises conditional
locking.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812104200.2239232-3-bigeasy@linutronix.de
|
|
The sleeping locks on PREEMPT_RT (rt_spin_lock() and friends) lack
sparse annotation. Therefore a missing spin_unlock() won't be spotted by
sparse in a PREEMPT_RT build while it is noticed on a !PREEMPT_RT build.
Add the __acquires/__releases macros to the lock/ unlock functions. The
trylock functions already use the __cond_lock() wrapper.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812104200.2239232-2-bigeasy@linutronix.de
|
|
The PCIe Bandwidth Controller performs RMW accesses the Link Control 2
Register which can occur concurrently to other sources of Link Control 2
Register writes. Therefore, add Link Control 2 Register among the PCI
Express Capability Registers that need RMW locking.
Link: https://lore.kernel.org/r/20241018144755.7875-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Whether a cgroup is frozen is determined solely by whether it is set to
to be frozen and whether its parent is frozen. Currently, when is cgroup
is frozen or unfrozen, it iterates through the entire subtree to freeze
or unfreeze its descentdants. However, this is unesessary for a cgroup
that does not change its effective frozen status. This path aims to skip
the subtree if its parent does not have a change in effective freeze.
For an example, subtree like, a-b-c-d-e-f-g, when a is frozen, the
entire tree is frozen. If we freeze b and c again, it is unesessary to
iterate d, e, f and g. So does that If we unfreeze b/c.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This change allows the uprobe consumer to behave as session which
means that 'handler' and 'ret_handler' callbacks are connected in
a way that allows to:
- control execution of 'ret_handler' from 'handler' callback
- share data between 'handler' and 'ret_handler' callbacks
The session concept fits to our common use case where we do filtering
on entry uprobe and based on the result we decide to run the return
uprobe (or not).
It's also convenient to share the data between session callbacks.
To achive this we are adding new return value the uprobe consumer
can return from 'handler' callback:
UPROBE_HANDLER_IGNORE
- Ignore 'ret_handler' callback for this consumer.
And store cookie and pass it to 'ret_handler' when consumer has both
'handler' and 'ret_handler' callbacks defined.
We store shared data in the return_consumer object array as part of
the return_instance object. This way the handle_uretprobe_chain can
find related return_consumer and its shared data.
We also store entry handler return value, for cases when there are
multiple consumers on single uprobe and some of them are ignored and
some of them not, in which case the return probe gets installed and
we need to have a way to find out which consumer needs to be ignored.
The tricky part is when consumer is registered 'after' the uprobe
entry handler is hit. In such case this consumer's 'ret_handler' gets
executed as well, but it won't have the proper data pointer set,
so we can filter it out.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-3-jolsa@kernel.org
|
|
Adding data pointer to both entry and exit consumer handlers and all
its users. The functionality itself is coming in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-2-jolsa@kernel.org
|
|
The rcu_gp_might_be_stalled() function is no longer used, so this commit
removes it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Per [1], -fsanitize=kernel-hwaddress with GCC currently does not disable
instrumentation in functions with __attribute__((no_sanitize_address)).
However, __attribute__((no_sanitize("hwaddress"))) does correctly
disable instrumentation. Use it instead.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117196 [1]
Link: https://lore.kernel.org/r/000000000000f362e80620e27859@google.com
Link: https://lore.kernel.org/r/ZvFGwKfoC4yVjN_X@J2N7QTR9R3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218854
Reported-by: syzbot+908886656a02769af987@syzkaller.appspotmail.com
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrew Pinski <pinskia@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Fixes: 7b861a53e46b ("kasan: Bump required compiler version")
Link: https://lore.kernel.org/r/20241021120013.3209481-1-elver@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As struct file_operations is really big, but (most) debugfs
files only use simple_open, read, write and perhaps seek, and
don't need anything else, this wastes a lot of space for NULL
pointers.
Add a struct debugfs_short_fops and some bookkeeping code in
debugfs so that users can use that with debugfs_create_file()
using _Generic to figure out which function to use.
Converting mac80211 to use it where possible saves quite a
bit of space:
1010127 205064 1220 1216411 128f9b net/mac80211/mac80211.ko (before)
981199 205064 1220 1187483 121e9b net/mac80211/mac80211.ko (after)
-------
-28928 = ~28KiB
With a marginal space cost in debugfs:
8701 550 16 9267 2433 fs/debugfs/inode.o (before)
25233 325 32 25590 63f6 fs/debugfs/file.o (before)
8914 558 16 9488 2510 fs/debugfs/inode.o (after)
25380 325 32 25737 6489 fs/debugfs/file.o (after)
---------------
+360 +8
(All on x86-64)
A simple spatch suggests there are more than 300 instances,
not even counting the ones hidden in macros like in mac80211,
that could be trivially converted, for additional savings of
about 240 bytes for each.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241022151838.26f9925fb959.Ia80b55e934bbfc45ce0df42a3233d34b35508046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The sysctl registration APIs do not need a terminating table entry
anymore and with commit acc154691fc7 ("sysctl: Warn on an empty procname
element") even emit warnings if such a sentinel entry is supplied.
While at it also remove the mention of "table->de" which was removed in
commit 3fbfa98112fc ("[PATCH] sysctl: remove the proc_dir_entry member
for the sysctl tables") back in 2007.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Remove documentation comment related to regulator_init callback.
This solves the following warning when building the kernel documentation:
./include/linux/regulator/machine.h:290: warning: Excess struct member 'regulator_init' description in 'regulator_init_data'
Fixes: 602ff58ae4fe ("regulator: core: remove machine init callback from config")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20241023155257.0fa7211d@canb.auug.org.au/
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241023-regulator-doc-fixup-v1-2-ec018742ad73@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add comment documenting introduced init_cb.
This solves the following warning when building the kernel documentation:
./include/linux/regulator/driver.h:435: warning: Function parameter or struct member 'init_cb' not described in 'regulator_desc'
Fixes: cfcdf395c21e ("regulator: core: add callback to perform runtime init")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20241023155120.6c4fea20@canb.auug.org.au/
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241023-regulator-doc-fixup-v1-1-ec018742ad73@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change smp_mb() imediately following a set_bit()
with smp_mb__after_atomic().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241018052310.2612084-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
npinfo is not used in any of the ndo_netpoll_setup() methods.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241018052108.2610827-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Nothing in kfifo.h directly needs dma-mapping.h, only two macros
use DMA_MAPPING_ERROR when actually instantiated. Drop the
dma-mapping.h include to reduce include bloat.
Add an explicity <linux/io.h> include to drivers/mailbox/omap-mailbox.c
as that file uses __raw_readl and __raw_writel through a complicated
include chain involving <linux/dma-mapping.h>
Fixes: d52b761e4b1a ("kfifo: add kfifo_dma_out_prepare_mapped()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241023055317.313234-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.
There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c539 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset groups the regulator patches around the init_data topic
discussed on pmbus write protect patchset [1]
[1]: https://lore.kernel.org/r/20240920-pmbus-wp-v1-0-d679ef31c483@baylibre.com
|
|
Commit 265b07df758a ("clk: Provide managed helper to get and enable bulk
clocks") added devm_clk_bulk_get_all_enable() function, but missed to
return the number of clocks stored in the clk_bulk_data table referenced
by the clks argument. Without knowing the number, it's not possible to
iterate these clocks when needed, hence the argument is useless and
could have been simply removed.
Introduce devm_clk_bulk_get_all_enabled() variant, which is consistent
with devm_clk_bulk_get_all() in terms of the returned value:
> 0 if one or more clocks have been stored
= 0 if there are no clocks
< 0 if an error occurred
Moreover, the naming is consistent with devm_clk_get_enabled(), i.e. use
the past form of 'enable'.
To reduce code duplication and improve patch readability, make
devm_clk_bulk_get_all_enable() use the new helper, as suggested by
Stephen Boyd.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241019-clk_bulk_ena_fix-v4-1-57f108f64e70@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The machine specific regulator_init() appears to be unused.
It does not allow a lot of interaction with the regulator framework,
since nothing from the framework is passed along (desc, config,
etc ...)
Machine specific init may also be done with the added init_cb() in
the regulator description, so remove regulator_init().
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-3-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide an initialisation callback to handle runtime parameters.
The idea is similar to the regulator_init() callback, but it provides
regulator specific structures, instead of just the driver specific data.
As an example, this allows the driver to amend the regulator constraints
based on runtime parameters if necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-2-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we have CONFIG_SECCOMP but not CONFIG_HAVE_ARCH_SECCOMP_FILTER
we get a compilation error:
../kernel/entry/common.c: In function 'syscall_trace_enter':
../kernel/entry/common.c:55:23: error: implicit declaration of function '__secure_computing' [-Werror=implicit-function-declaration]
55 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
This is because generic entry calls __secure_computing()
unconditionally.
Provide the needed stub similar to how current ARM does
this by calling secure_computing_strict() in the absence
of secure_computing(). This is similar to what is done for
ARM in arch/arm/kernel/ptrace.c.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241022-seccomp-compile-error-v2-1-c9f08a4f8ebb@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Merge in block/fs prep patches for the atomic write support.
* for-6.13/block-atomic:
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
|
|
After a SED drive is provisioned, there is no way to change the SID
password via the ioctl() interface. A new ioctl IOC_OPAL_SET_SID_PW
will allow the password to be changed. The valid current password is
required.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240829175639.6478-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Applications using the passthrough interfaces for IO want to continue
seeing the disk stats. These requests had been fenced off from this
block layer feature. While the block layer doesn't necessarily know what
a passthrough command does, we do know the data size and direction,
which is enough to account for the command's stats.
Since tracking these has the potential to produce unexpected results,
the passthrough stats are locked behind a new queue flag that needs to
be enabled with the /sys/block/<dev>/queue/iostats_passthrough
attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241007153236.2818562-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce add_disk_fwnode() as a replacement of device_add_disk() that
permits to pass and attach a fwnode to disk dev.
This variant can be useful for eMMC that might have the partition table
for the disk defined in DT. A parser can later make use of the attached
fwnode to parse the related table and init the hardcoded partition for
the disk.
device_add_disk() is converted to a simple wrapper of add_disk_fwnode()
with the fwnode entry set as NULL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-4-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simply checking the rq_flags is enough to determine if accounting is
being done for this request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kernel test robot reported a build failure on m68k in the intel
driver due to the recent shapers-related changes.
The mentioned arch has funny alignment properties, let's be explicit
about the binary layout expectation introducing a padding field.
Fixes: 608a5c05c39b ("virtchnl: support queue rate limit and quanta size configuration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410131710.71Wt6LKO-lkp@intel.com/
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/e45d1c9f17356d431b03b419f60b8b763d2ff768.1729000481.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for SCPSYS power domains of MT6735. All non-CPU power domains
are added except for MD2 (C2K modem), which is left out due to issues
with powering it on.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241017085136.68053-3-y.oudjana@protonmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the __counted_by compiler attribute to the flexible array member
a_entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Use struct_size() to calculate the number of bytes to allocate for new
and cloned acls and remove the local size variables.
Change the posix_acl_alloc() function parameter count from int to
unsigned int to match posix_acl's a_count data type. Add identifier
names to the function definition to silence two checkpatch warnings.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241018121426.155247-2-thorsten.blum@linux.dev
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reduce posix_acl's struct size by 8 bytes by realigning its members.
Cc: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241015202158.2376-1-thorsten.blum@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now, the epoll only use wake_up() interface to wake up task.
However, sometimes, there are epoll users which want to use
the synchronous wakeup flag to hint the scheduler, such as
Android binder driver.
So add a wake_up_sync() define, and use the wake_up_sync()
when the sync is true in ep_poll_callback().
Co-developed-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20240426080548.8203-1-xuewen.yan@unisoc.com
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Reported-by: Benoit Lize <lizeb@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Epoll relies on a racy fastpath check during __fput() in
eventpoll_release() to avoid the hit of pointlessly acquiring a
semaphore. Annotate that race by using WRITE_ONCE() and READ_ONCE().
Link: https://lore.kernel.org/r/66edfb3c.050a0220.3195df.001a.GAE@google.com
Link: https://lore.kernel.org/r/20240925-fungieren-anbauen-79b334b00542@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+3b6b32dc50537a49bb4a@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
|
|
Since the DSA/IAA device IDs are only used by the IDXD driver, there is
no need to define them as public IDs. Move their definitions to the IDXD
driver to limit their scope. This change helps reduce unnecessary
exposure of the device IDs in the global space, making the codebase
cleaner and better encapsulated.
There is no functional change.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20241018213725.4167413-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
iomap_want_unshare_iter currently sits in fs/iomap/buffered-io.c, which
depends on CONFIG_BLOCK. It is also in used in fs/dax.c whіch has no
such dependency. Given that it is a trivial check turn it into an inline
in include/linux/iomap.h to fix the DAX && !BLOCK build.
Fixes: 6ef6a0e821d3 ("iomap: share iomap_unshare_iter predicate code with fsdax")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241015041350.118403-1-hch@lst.de
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is based on copy_struct_from_user(), but there is one additional
case to consider when creating a syscall that returns an
extensible-struct to userspace -- how should data in the struct that
cannot fit into the userspace struct be handled (ksize > usize)?
There are three possibilies:
1. The interface is like sched_getattr(2), where new information will
be silently not provided to userspace. This is probably what most
interfaces will want to do, as it provides the most possible
backwards-compatibility.
2. The interface is like lsm_list_modules(2), where you want to return
an error like -EMSGSIZE if not providing information could result in
the userspace program making a serious mistake (such as one that
could lead to a security problem) or if you want to provide some
flag to userspace so they know that they are missing some
information.
3. The interface is like statx(2), where there some kind of a request
mask that indicates what data userspace would like. One could
imagine that statx2(2) (using extensible structs) would want to
return -EMSGSIZE if the user explicitly requested a field that their
structure is too small to fit, but not return an error if the field
was not explicitly requested. This is kind of a mix between (1) and
(2) based on the requested mask.
The copy_struct_to_user() helper includes a an extra argument that is
used to return a boolean flag indicating whether there was a non-zero
byte in the trailing bytes that were not copied to userspace. This can
be used in the following ways to handle all three cases, respectively:
1. Just pass NULL, as you don't care about this case.
2. Return an error (say -EMSGSIZE) if the argument was set to true by
copy_struct_to_user().
3. If the argument was set to true by copy_struct_to_user(), check if
there is a flag that implies a field larger than usize.
This is the only case where callers of copy_struct_to_user() should
check usize themselves. This will probably require scanning an array
that specifies what flags were added for each version of the flags
struct and returning an error if the request mask matches any of the
flags that were added in versions of the struct that are larger than
usize.
At the moment we don't have any users of (3), so this patch doesn't
include any helpers to make the necessary scanning easier, but it should
be fairly easy to add some if necessary.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20241010-extensible-structs-check_fields-v3-1-d2833dfe6edd@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are two pages in one TLB entry on LoongArch system. For kernel
space, it requires both two pte entries (buddies) with PAGE_GLOBAL bit
set, otherwise HW treats it as non-global tlb, there will be potential
problems if tlb entry for kernel space is not global. Such as fail to
flush kernel tlb with the function local_flush_tlb_kernel_range() which
supposed only flush tlb with global bit.
Kernel address space areas include percpu, vmalloc, vmemmap, fixmap and
kasan areas. For these areas both two consecutive page table entries
should be enabled with PAGE_GLOBAL bit. So with function set_pte() and
pte_clear(), pte buddy entry is checked and set besides its own pte
entry. However it is not atomic operation to set both two pte entries,
there is problem with test_vmalloc test case.
So function kernel_pte_init() is added to init a pte table when it is
created for kernel address space, and the default initial pte value is
PAGE_GLOBAL rather than zero at beginning. Then only its own pte entry
need update with function set_pte() and pte_clear(), nothing to do with
the pte buddy entry.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a
Hardware module used to collect all the requests from both software and the
various remote processors embedded into the SoC and decide about a minimum
operating voltage and a minimum DRAM frequency to fulfill those requests in
an effort to provide the best achievable performance per watt.
This hardware IP is capable of transparently performing direct register R/W
on all of the DVFSRC-controlled regulators and SoC bandwidth knobs.
This driver includes support for MT8183, MT8192 and MT8195.
Co-Developed-by: Dawei Chien <dawei.chien@mediatek.com>
[Angelo: Partial refactoring and cleanups]
Reviewed-by: Georgi Djakov <djakov@kerenl.org>
Link: https://lore.kernel.org/r/20240610085735.147134-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
As Allison reported [1], currently get_tree_bdev() will store
"Can't lookup blockdev" error message. Although it makes sense for
pure bdev-based fses, this message may mislead users who try to use
EROFS file-backed mounts since get_tree_nodev() is used as a fallback
then.
Add get_tree_bdev_flags() to specify extensible flags [2] and
GET_TREE_BDEV_QUIET_LOOKUP to silence "Can't lookup blockdev" message
since it's misleading to EROFS file-backed mounts now.
[1] https://lore.kernel.org/r/CAOYeF9VQ8jKVmpy5Zy9DNhO6xmWSKMB-DO8yvBB0XvBE7=3Ugg@mail.gmail.com
[2] https://lore.kernel.org/r/ZwUkJEtwIpUA4qMz@infradead.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241009033151.2334888-1-hsiangkao@linux.alibaba.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some workloads hit the infamous dev_watchdog() message:
"NETDEV WATCHDOG: eth0 (xxxx): transmit queue XX timed out"
It seems possible to hit this even for perfectly normal
BQL enabled drivers:
1) Assume a TX queue was idle for more than dev->watchdog_timeo
(5 seconds unless changed by the driver)
2) Assume a big packet is sent, exceeding current BQL limit.
3) Driver ndo_start_xmit() puts the packet in TX ring,
and netdev_tx_sent_queue() is called.
4) QUEUE_STATE_STACK_XOFF could be set from netdev_tx_sent_queue()
before txq->trans_start has been written.
5) txq->trans_start is written later, from netdev_start_xmit()
if (rc == NETDEV_TX_OK)
txq_trans_update(txq)
dev_watchdog() running on another cpu could read the old
txq->trans_start, and then see QUEUE_STATE_STACK_XOFF, because 5)
did not happen yet.
To solve the issue, write txq->trans_start right before one XOFF bit
is set :
- _QUEUE_STATE_DRV_XOFF from netif_tx_stop_queue()
- __QUEUE_STATE_STACK_XOFF from netdev_tx_sent_queue()
From dev_watchdog(), we have to read txq->state before txq->trans_start.
Add memory barriers to enforce correct ordering.
In the future, we could avoid writing over txq->trans_start for normal
operations, and rename this field to txq->xoff_start_time.
Fixes: bec251bc8b6a ("net: no longer stop all TX queues in dev_watchdog()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241015194118.3951657-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'struct nand_ecc_engine_ops' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
Update the prototype of mxic_ecc_get_pipelined_ops() accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
16709 1374 16 18099 46b3 drivers/mtd/nand/ecc-mxic.o
After:
=====
text data bss dec hex filename
16789 1294 16 18099 46b3 drivers/mtd/nand/ecc-mxic.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/72597e9de2320a4109be2112e696399592edacd4.1729271136.git.christophe.jaillet@wanadoo.fr
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
