| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
"Silence a GCC value-range warning that is being ironically triggered
by bounds checking"
* tag 'hardening-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Hide run-time copy size from value range tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fix xen netfront crash (XSA-465) and avoid using the hypercall page
that doesn't do speculation mitigations (XSA-466)"
* tag 'xsa465+xsa466-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove hypercall page
x86/xen: use new hypercall functions instead of hypercall page
x86/xen: add central hypercall functions
x86/xen: don't do PV iret hypercall through hypercall page
x86/static-call: provide a way to do very early static-call updates
objtool/x86: allow syscall instruction
x86: make get_cpu_vendor() accessible from Xen code
xen/netfront: fix crash when removing device
|
|
GCC performs value range tracking for variables as a way to provide better
diagnostics. One place this is regularly seen is with warnings associated
with bounds-checking, e.g. -Wstringop-overflow, -Wstringop-overread,
-Warray-bounds, etc. In order to keep the signal-to-noise ratio high,
warnings aren't emitted when a value range spans the entire value range
representable by a given variable. For example:
unsigned int len;
char dst[8];
...
memcpy(dst, src, len);
If len's value is unknown, it has the full "unsigned int" range of [0,
UINT_MAX], and GCC's compile-time bounds checks against memcpy() will
be ignored. However, when a code path has been able to narrow the range:
if (len > 16)
return;
memcpy(dst, src, len);
Then the range will be updated for the execution path. Above, len is
now [0, 16] when reading memcpy(), so depending on other optimizations,
we might see a -Wstringop-overflow warning like:
error: '__builtin_memcpy' writing between 9 and 16 bytes into region of size 8 [-Werror=stringop-overflow]
When building with CONFIG_FORTIFY_SOURCE, the fortified run-time bounds
checking can appear to narrow value ranges of lengths for memcpy(),
depending on how the compiler constructs the execution paths during
optimization passes, due to the checks against the field sizes. For
example:
if (p_size_field != SIZE_MAX &&
p_size != p_size_field && p_size_field < size)
As intentionally designed, these checks only affect the kernel warnings
emitted at run-time and do not block the potentially overflowing memcpy(),
so GCC thinks it needs to produce a warning about the resulting value
range that might be reaching the memcpy().
We have seen this manifest a few times now, with the most recent being
with cpumasks:
In function ‘bitmap_copy’,
inlined from ‘cpumask_copy’ at ./include/linux/cpumask.h:839:2,
inlined from ‘__padata_set_cpumasks’ at kernel/padata.c:730:2:
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ reading between 257 and 536870904 bytes from a region of size 256 [-Werror=stringop-overread]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:633:9: note: in expansion of macro ‘__underlying_memcpy’
633 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:678:26: note: in expansion of macro ‘__fortify_memcpy_chk’
678 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/bitmap.h:259:17: note: in expansion of macro ‘memcpy’
259 | memcpy(dst, src, len);
| ^~~~~~
kernel/padata.c: In function ‘__padata_set_cpumasks’:
kernel/padata.c:713:48: note: source object ‘pcpumask’ of size [0, 256]
713 | cpumask_var_t pcpumask,
| ~~~~~~~~~~~~~~^~~~~~~~
This warning is _not_ emitted when CONFIG_FORTIFY_SOURCE is disabled,
and with the recent -fdiagnostics-details we can confirm the origin of
the warning is due to FORTIFY's bounds checking:
../include/linux/bitmap.h:259:17: note: in expansion of macro 'memcpy'
259 | memcpy(dst, src, len);
| ^~~~~~
'__padata_set_cpumasks': events 1-2
../include/linux/fortify-string.h:613:36:
612 | if (p_size_field != SIZE_MAX &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
613 | p_size != p_size_field && p_size_field < size)
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
| |
| (1) when the condition is evaluated to false
| (2) when the condition is evaluated to true
'__padata_set_cpumasks': event 3
114 | #define __underlying_memcpy __builtin_memcpy
| ^
| |
| (3) out of array bounds here
Note that the cpumask warning started appearing since bitmap functions
were recently marked __always_inline in commit ed8cd2b3bd9f ("bitmap:
Switch from inline to __always_inline"), which allowed GCC to gain
visibility into the variables as they passed through the FORTIFY
implementation.
In order to silence these false positives but keep otherwise deterministic
compile-time warnings intact, hide the length variable from GCC with
OPTIMIZE_HIDE_VAR() before calling the builtin memcpy.
Additionally add a comment about why all the macro args have copies with
const storage.
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/all/db7190c8-d17f-4a0d-bc2f-5903c79f36c2@t-8ch.de/
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/all/20241112124127.1666300-1-nilay@linux.ibm.com/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Series from Damien fixing issues with the zoned write plugging
- Fix for a potential UAF in block cgroups
- Fix deadlock around queue freezing and the sysfs lock
- Various little cleanups and fixes
* tag 'block-6.13-20241213' of git://git.kernel.dk/linux:
block: Fix potential deadlock while freezing queue and acquiring sysfs_lock
block: Fix queue_iostats_passthrough_show()
blk-mq: Clean up blk_mq_requeue_work()
mq-deadline: Remove a local variable
blk-iocost: Avoid using clamp() on inuse in __propagate_weights()
block: Make bio_iov_bvec_set() accept pointer to const iov_iter
block: get wp_offset by bdev_offset_from_zone_start
blk-cgroup: Fix UAF in blkcg_unpin_online()
MAINTAINERS: update Coly Li's email address
block: Prevent potential deadlocks in zone write plug error recovery
dm: Fix dm-zoned-reclaim zone write pointer alignment
block: Ignore REQ_NOWAIT for zone reset and zone finish operations
block: Use a zone write plug BIO work for REQ_NOWAIT BIOs
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
current->state = TASK_INTERRUPTIBLE();
schedule();
deactivate_task()
dl_stop_server();
pick_next_task()
pick_next_task_fair()
sched_balance_newidle()
rq_unlock(this_rq)
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lkml.kernel.org/r/20241213032244.877029-1-vineeth@bitbyteword.org
|
|
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
|
|
Make bio_iov_bvec_set() accept a pointer to const iov_iter, which means
that we can drop the undesirable casting to struct iov_iter pointer in
blk_rq_map_user_bvec().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241202115727.2320401-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().
Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
|
|
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone reclaim processing of the dm-zoned device mapper uses
blkdev_issue_zeroout() to align the write pointer of a zone being used
for reclaiming another zone, to write the valid data blocks from the
zone being reclaimed at the same position relative to the zone start in
the reclaim target zone.
The first call to blkdev_issue_zeroout() will try to use hardware
offload using a REQ_OP_WRITE_ZEROES operation if the device reports a
non-zero max_write_zeroes_sectors queue limit. If this operation fails
because of the lack of hardware support, blkdev_issue_zeroout() falls
back to using a regular write operation with the zero-page as buffer.
Currently, such REQ_OP_WRITE_ZEROES failure is automatically handled by
the block layer zone write plugging code which will execute a report
zones operation to ensure that the write pointer of the target zone of
the failed operation has not changed and to "rewind" the zone write
pointer offset of the target zone as it was advanced when the write zero
operation was submitted. So the REQ_OP_WRITE_ZEROES failure does not
cause any issue and blkdev_issue_zeroout() works as expected.
However, since the automatic recovery of zone write pointers by the zone
write plugging code can potentially cause deadlocks with queue freeze
operations, a different recovery must be implemented in preparation for
the removal of zone write plugging report zones based recovery.
Do this by introducing the new function blk_zone_issue_zeroout(). This
function first calls blkdev_issue_zeroout() with the flag
BLKDEV_ZERO_NOFALLBACK to intercept failures on the first execution
which attempt to use the device hardware offload with the
REQ_OP_WRITE_ZEROES operation. If this attempt fails, a report zone
operation is issued to restore the zone write pointer offset of the
target zone to the correct position and blkdev_issue_zeroout() is called
again without the BLKDEV_ZERO_NOFALLBACK flag. The report zones
operation performing this recovery is implemented using the helper
function disk_zone_sync_wp_offset() which calls the gendisk report_zones
file operation with the callback disk_report_zones_cb(). This callback
updates the target write pointer offset of the target zone using the new
function disk_zone_wplug_sync_wp_offset().
dmz_reclaim_align_wp() is modified to change its call to
blkdev_issue_zeroout() to a call to blk_zone_issue_zeroout() without any
other change needed as the two functions are functionnally equivalent.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
The Felix DSA driver presents unique challenges that make the simplistic
ocelot PTP TX timestamping procedure unreliable: any transmitted packet
may be lost in hardware before it ever leaves our local system.
This may happen because there is congestion on the DSA conduit, the
switch CPU port or even user port (Qdiscs like taprio may delay packets
indefinitely by design).
The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(),
runs out of timestamp IDs eventually, because it never detects that
packets are lost, and keeps the IDs of the lost packets on hold
indefinitely. The manifestation of the issue once the entire timestamp
ID range becomes busy looks like this in dmesg:
mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp
mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp
At the surface level, we need a timeout timer so that the kernel knows a
timestamp ID is available again. But there is a deeper problem with the
implementation, which is the monotonically increasing ocelot_port->ts_id.
In the presence of packet loss, it will be impossible to detect that and
reuse one of the holes created in the range of free timestamp IDs.
What we actually need is a bitmap of 63 timestamp IDs tracking which one
is available. That is able to use up holes caused by packet loss, but
also gives us a unique opportunity to not implement an actual timer_list
for the timeout timer (very complicated in terms of locking).
We could only declare a timestamp ID stale on demand (lazily), aka when
there's no other timestamp ID available. There are pros and cons to this
approach: the implementation is much more simple than per-packet timers
would be, but most of the stale packets would be quasi-leaked - not
really leaked, but blocked in driver memory, since this algorithm sees
no reason to free them.
An improved technique would be to check for stale timestamp IDs every
time we allocate a new one. Assuming a constant flux of PTP packets,
this avoids stale packets being blocked in memory, but of course,
packets lost at the end of the flux are still blocked until the flux
resumes (nobody left to kick them out).
Since implementing per-packet timers is way too complicated, this should
be good enough.
Testing procedure:
Persistently block traffic class 5 and try to run PTP on it:
$ tc qdisc replace dev swp3 parent root taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0xdf 100000 flags 0x2
[ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
$ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3
ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[70.406]: timed out while polling for tx timestamp
ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[70.406]: port 1 (swp3): send peer delay response failed
ptp4l[70.407]: port 1 (swp3): clearing fault immediately
ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1
ptp4l[71.400]: timed out while polling for tx timestamp
ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[71.401]: port 1 (swp3): send peer delay response failed
ptp4l[71.401]: port 1 (swp3): clearing fault immediately
[ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2
ptp4l[72.401]: timed out while polling for tx timestamp
ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[72.402]: port 1 (swp3): send peer delay response failed
ptp4l[72.402]: port 1 (swp3): clearing fault immediately
ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3
ptp4l[73.400]: timed out while polling for tx timestamp
ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[73.400]: port 1 (swp3): send peer delay response failed
ptp4l[73.400]: port 1 (swp3): clearing fault immediately
[ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4
ptp4l[74.400]: timed out while polling for tx timestamp
ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[74.401]: port 1 (swp3): send peer delay response failed
ptp4l[74.401]: port 1 (swp3): clearing fault immediately
ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[75.410]: timed out while polling for tx timestamp
ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[75.411]: port 1 (swp3): send peer delay response failed
ptp4l[75.411]: port 1 (swp3): clearing fault immediately
(...)
Remove the blocking condition and see that the port recovers:
$ same tc command as above, but use "sched-entry S 0xff" instead
$ same ptp4l command as above
ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost
[ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost
[ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost
[ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost
[ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d
ptp4l[104.966]: port 1 (swp3): assuming the grand master role
ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER
[ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0
(...)
Notice that in this new usage pattern, a non-congested port should
basically use timestamp ID 0 all the time, progressing to higher numbers
only if there are unacknowledged timestamps in flight. Compare this to
the old usage, where the timestamp ID used to monotonically increase
modulo OCELOT_MAX_PTP_ID.
In terms of implementation, this simplifies the bookkeeping of the
ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse
the list of two-step timestampable skbs for each new packet anyway, the
information can already be computed and does not need to be stored.
Also, ocelot_port->tx_skbs is always accessed under the switch-wide
ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's
lock and can use the unlocked primitives safely.
This problem was actually detected using the tc-taprio offload, and is
causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959)
supports but Ocelot (VSC7514) does not. Thus, I've selected the commit
to blame as the one adding initial timestamping support for the Felix
switch.
Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a parameter type which affects 32-bit"
* tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux:
io_uring: Change res2 parameter type in io_uring_cmd_done
|
|
Linus noticed that the new if_not_guard() definition is fragile:
"This macro generates actively wrong code if it happens to be inside an
if-statement or a loop without a block.
IOW, code like this:
for (iterate-over-something)
if_not_guard(a)
return -BUSY;
looks like will build fine, but will generate completely incorrect code."
The reason is that the __if_not_guard() macro is multi-statement, so
while most kernel developers expect macros to be simple or at least
compound statements - but for __if_not_guard() it is not so:
#define __if_not_guard(_name, _id, args...) \
BUILD_BUG_ON(!__is_cond_ptr(_name)); \
CLASS(_name, _id)(args); \
if (!__guard_ptr(_name)(&_id))
To add insult to injury, the placement of the BUILD_BUG_ON() line makes
the macro appear to compile fine, but it will generate incorrect code
as Linus reported, for example if used within iteration or conditional
statements that will use the first statement of a macro as a loop body
or conditional statement body.
[ I'd also like to note that the original submission by David Lechner did
not contain the BUILD_BUG_ON() line, so it was safer than what we ended
up committing. Mea culpa. ]
It doesn't appear to be possible to turn this macro into a robust
single or compound statement that could be used in single statements,
due to the necessity to define an auto scope variable with an open
scope and the necessity of it having to expand to a partial 'if'
statement with no body.
Instead of trying to work around this fragility, just remove the
construct before it gets used.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z1LBnX9TpZLR5Dkf@gmail.com
|
|
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org
Fixes: 42399301203e ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current solution to adjust codetag references during page migration is
done in 3 steps:
1. sets the codetag reference of the old page as empty (not pointing
to any codetag);
2. subtracts counters of the new page to compensate for its own
allocation;
3. sets codetag reference of the new page to point to the codetag of
the old page.
This does not work if CONFIG_MEM_ALLOC_PROFILING_DEBUG=n because
set_codetag_empty() becomes NOOP. Instead, let's simply swap codetag
references so that the new page is referencing the old codetag and the old
page is referencing the new codetag. This way accounting stays valid and
the logic makes more sense.
Link: https://lkml.kernel.org/r/20241129025213.34836-1-00107082@163.com
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Acked-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Per documentation, stack_depot_save_flags() was meant to be usable from
NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still
would try to take the pool_lock in an attempt to save a stack trace in the
current pool (if space is available).
This could result in deadlock if an NMI is handled while pool_lock is
already held. To avoid deadlock, only try to take the lock in NMI context
and give up if unsuccessful.
The documentation is fixed to clearly convey this.
Link: https://lkml.kernel.org/r/Z0CcyfbPqmxJ9uJH@elver.google.com
Link: https://lkml.kernel.org/r/20241122154051.3914732-1-elver@google.com
Fixes: 4434a56ec209 ("stackdepot: make fast paths lock-less again")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is unsafe to call PageTail() in dump_page() as page_is_fake_head() will
almost certainly return true when called on a head page that is copied to
the stack. That will cause the VM_BUG_ON_PGFLAGS() in const_folio_flags()
to trigger when it shouldn't. Fortunately, we don't need to call
PageTail() here; it's fine to have a pointer to a virtual alias of the
page's flag word rather than the real page's flag word.
Link: https://lkml.kernel.org/r/20241125201721.2963278-1-willy@infradead.org
Fixes: fae7d834c43c ("mm: add __dump_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
|
|
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the type of the res2 parameter in io_uring_cmd_done from ssize_t
to u64. This aligns the parameter type with io_req_set_cqe32_extra,
which expects u64 arguments.
The change eliminates potential issues on 32-bit architectures where
ssize_t might be 32-bit.
Only user of passing res2 is drivers/nvme/host/ioctl.c and it actually
passes u64.
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Cc: stable@vger.kernel.org
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Link: https://lore.kernel.org/r/20241203-io_uring_cmd_done-res2-as-u64-v2-1-5e59ae617151@ddn.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The below commit introduces a dummy lockdep map, but didn't get
the initialization quite right (it should mimic the initialization
of the real ww_mutex lockdep maps). It also introduced a separate
locking api selftest failure. Fix these.
Closes: https://lore.kernel.org/lkml/Zw19sMtnKdyOVQoh@boqun-archlinux/
Fixes: 823a566221a5 ("locking/ww_mutex: Adjust to lockdep nest_lock requirements")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241127085430.3045-1-thomas.hellstrom@linux.intel.com
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
|
|
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
|
|
Pull more io_uring updates from Jens Axboe:
- Remove a leftover struct from when the cqwait registered waiting was
transitioned to regions.
- Fix for an issue introduced in this merge window, where nop->fd might
be used uninitialized. Ensure it's always set.
- Add capping of the task_work run in local task_work mode, to prevent
bursty and long chains from adding too much latency.
- Work around xa_store() leaving ->head non-NULL if it encounters an
allocation error during storing. Just a debug trigger, and can go
away once xa_store() behaves in a more expected way for this
condition. Not a major thing as it basically requires fault injection
to trigger it.
- Fix a few mapping corner cases
- Fix KCSAN complaint on reading the table size post unlock. Again not
a "real" issue, but it's easy to silence by just keeping the reading
inside the lock that protects it.
* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
io_uring/tctx: work around xa_store() allocation error issue
io_uring: fix corner case forgetting to vunmap
io_uring: fix task_work cap overshooting
io_uring: check for overflows in io_pin_pages
io_uring/nop: ensure nop->fd is always initialized
io_uring: limit local tw done
io_uring: add io_local_work_pending()
io_uring/region: return negative -E2BIG in io_create_region()
io_uring: protect register tracing
io_uring: remove io_uring_cqwait_reg_arg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"New drivers:
- Amlogic A4 and A5 RTC
- Marvell 88PM886 PMIC RTC
- Renesas RTCA-3 for Renesas RZ/G3S
Driver updates:
- ab-eoz9: fix temperature and alarm support
- cmos: improve locking behaviour
- isl12022: add alarm support
- m48t59: improve epoch handling
- mt6359: add range
- rzn1: fix BCD conversions and simplify driver"
* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
rtc: rzn1: reduce register access
rtc: rzn1: drop superfluous wday calculation
m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
rtc: m48t59: Use platform_data struct for year offset value
rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
rtc: rv3028: fix RV3028_TS_COUNT type
rtc: rzn1: update Michel's email
rtc: rzn1: fix BCD to rtc_time conversion errors
rtc: amlogic-a4: fix compile error
rtc: amlogic-a4: drop error messages
MAINTAINERS: Add an entry for Amlogic RTC driver
rtc: support for the Amlogic on-chip RTC
dt-bindings: rtc: Add Amlogic A4 and A5 RTC
rtc: add driver for Marvell 88PM886 PMIC RTC
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
rtc: pcf8563: Switch to regmap
rtc: pcf8563: Sort headers alphabetically
rtc: abx80x: Fix WDT bit position of the status register
...
|
|
Pull ceph updates from Ilya Dryomov:
"A fix for the mount "device" string parser from Patrick and two cred
reference counting fixups from Max, marked for stable.
Also included a number of cleanups and a tweak to MAINTAINERS to avoid
unnecessarily CCing netdev list"
* tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client:
ceph: fix cred leak in ceph_mds_check_access()
ceph: pass cred pointer to ceph_mds_auth_match()
ceph: improve caps debugging output
ceph: correct ceph_mds_cap_peer field name
ceph: correct ceph_mds_cap_item field name
ceph: miscellaneous spelling fixes
ceph: Use strscpy() instead of strcpy() in __get_snap_name()
ceph: Use str_true_false() helper in status_show()
ceph: requalify some char pointers as const
ceph: extract entity name from device id
MAINTAINERS: exclude net/ceph from networking
ceph: Remove fs/ceph deadcode
libceph: Remove unused ceph_crypto_key_encode
libceph: Remove unused ceph_osdc_watch_check
libceph: Remove unused pagevec functions
libceph: Remove unused ceph_pagelist functions
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- nfs/localio: fix for a memory corruption in nfs_local_read_done
- Revert "nfs: don't reuse partially completed requests in
nfs_lock_and_join_requests"
- nfsv4:
- ignore SB_RDONLY when mounting nfs
- Fix a use-after-free problem in open()
- sunrpc:
- clear XPRT_SOCK_UPD_TIMEOUT when reseting the transport
- timeout and cancel TLS handshake with -ETIMEDOUT
- fix one UAF issue caused by sunrpc kernel tcp socket
- Fix a hang in TLS sock_close if sk_write_pending
- pNFS/blocklayout: Fix device registration issues
Features and cleanups:
- localio cleanups from Mike Snitzer
- Clean up refcounting on the nfs version modules
- __counted_by() annotations
- nfs: make processes that are waiting for an I/O lock killable"
* tag 'nfs-for-6.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
fs/nfs/io: make nfs_start_io_*() killable
nfs/blocklayout: Limit repeat device registration on failure
nfs/blocklayout: Don't attempt unregister for invalid block device
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
nfs: ignore SB_RDONLY when mounting nfs
Revert "nfs: don't reuse partially completed requests in nfs_lock_and_join_requests"
Revert "fs: nfs: fix missing refcnt by replacing folio_set_private by folio_attach_private"
nfs/localio: must clear res.replen in nfs_local_read_done
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
NFSv4.0: Fix the wake up of the next waiter in nfs_release_seqid()
SUNRPC: Fix a hang in TLS sock_close if sk_write_pending
sunrpc: remove newlines from tracepoints
nfs: Annotate struct pnfs_commit_array with __counted_by()
nfs/localio: eliminate need for nfs_local_fsync_work forward declaration
nfs/localio: remove extra indirect nfs_to call to check {read,write}_iter
nfs/localio: eliminate unnecessary kref in nfs_local_fsync_ctx
nfs/localio: remove redundant suid/sgid handling
NFS: Implement get_nfs_version()
...
|
