summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2017-06-02i2c: sh_mobile: remove platform_dataWolfram Sang
No platform currently upstream makes use of this platform_data anymore. The ones that did are converted to DT meanwhile. So, remove it. The old platforms likely don't have the 'clks_per_cnt' feature, otherwise it would have been implemented by now. And in the unlikely case they need to setup a different bus speed, we should rather go for a generic i2c platform data just for that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02clk: Provide dummy of_clk_get_from_provider() for compile-testingGeert Uytterhoeven
When CONFIG_ON=n, dummies are provided for of_clk_get() and of_clk_get_by_name(), but not for of_clk_get_from_provider(). Provide a dummy for the latter, to improve the ability to do compile-testing. This requires removing the existing dummy in the Lantiq clock code. Fixes: 766e6a4ec602d0c1 ("clk: add DT clock binding support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-06-01 This series contains updates to i40e, i40evf and the "new" AVF virtchnl. This is the introduction of the Intel(R) Ethernet Adaptive Virtual Function driver code and device ID, as presented at the NetDEV 1.2 conference in 2016. http://netdevconf.org/1.2/session.html?anjali-singhai The idea is to convert the interface between the i40evf driver and the parent i40e PF driver to be generic, as the i40evf driver should in the future be able to run on top of other Intel PF drivers, and negotiate any features beyond a "base expected" set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Add support for changing iSCSI macMintz, Yuval
Enhance API between qedi and qed, allowing qedi to inform device's firmware when the iSCSI mac is to be changed. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Support NVM-image reading APIMintz, Yuval
Storage drivers require images from the nvram in boot-from-SAN scenarios. This provides the necessary API between qed and the protocol drivers to perform such reads. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Share additional information with qedfMintz, Yuval
Share several new tidbits with qedf: - wwpn & wwnn - Absolute pf-id [this one is actually meant for qedi as well] - Number of available CQs While we're at it, now that qedf will be aware of the available CQs we can add some validation on the inputs it provides. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02team: add macro MODULE_ALIAS_TEAM_MODE for team mode aliasZhang Shengju
Add a new macro MODULE_ALIAS_TEAM_MODE to unify and simplify the declaration of team mode alias. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02usb: gadget: Allow a non-SuperSpeed gadget to support LPMJohn Youn
This commit allows a gadget that does not support SuperSpeed to indicate that it supports LPM. It does this by setting the 'lpm_capable' flag in the gadget structure. If a gadget sets this, the composite gadget framework will set the bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and also return a USB 2.0 Extension descriptor as part of the BOS descriptor set. See USB 2.0 LPM ECN Section 3. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02drm: omapdrm: Remove unused default display name supportLaurent Pinchart
The default display name is both unused and never set by platform data. Remove default display name module parameter, platform data field and runtime infrastructure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-06-01Merge tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Revert patch accidentally included in the merge window pull request, and fix a crash that was likely a result of buggy client behavior" * tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linux: nfsd4: fix null dereference on replay nfsd: Revert "nfsd: check for oversized NFSv2/v3 arguments"
2017-06-01virtchnl: Add compile time static asserts to validate structure sizesSridhar Samudrala
This uses preprocessor tricks to make sure that a divide by zero occurs if a struct changes size outside the expected number of bytes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: Add pad fields to a couple of structuresSridhar Samudrala
This removes holes and makes structure sizes consistent across 32 and 64 bit builds. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40e/virtchnl: move function to virtchnlJesse Brandeburg
This moves a function that is needed for the virtchnl interface from the i40e PF driver over to the virtchnl.h file. It was manually verified that the function in question is unchanged except for the function name and function header, which explains the slight difference in the number of lines removed/added. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: finish conversion to virtchnl interfaceJesse Brandeburg
This patch implements the complete version of the virtchnl.h file with final renames, and fixes the related code in i40e and i40evf. It also expands comments, and adds details on the usage of certain fields. In addition, due to the changes a couple of casts are needed to prevent errors found by sparse after renaming some fields. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40evf/virtchnl: whitespace cleanupsJesse Brandeburg
This patch fixes up a bunch of whitespace issues introduced by the previous automated change of name from i40e to virtchnl. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40e/virtchnl: refactor code for validate checksJesse Brandeburg
This change updates the arguments passed to the validate function and fixes the caller, as well as uses the new return values added to virtchnl.h One other minor tweak, remove a duplicate set to zero of valid_len. This is in preparation for moving the function to virtchnl.h. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: convert to new macrosJesse Brandeburg
As part of the conversion, change the arguments to VF_IS_V1[01] macros and move them to virtchnl.h Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: rename i40e to generic virtchnlJesse Brandeburg
This morphs all the i40e and i40evf references to/in virtchnl.h to be generic, using only automated methods. Updates all the callers to use the new names. A followup patch provides separate clean ups for messy line conversions from these "automatic" changes, to make them more reviewable. Was executed with the following sed script: sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_client.c sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_prototype.h sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40e_common.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40e_prototype.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_client.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_main.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c sed -i -f transform_script include/linux/avf/virtchnl.h transform_script: ----8<---- s/I40E_VIRTCHNL_SUPPORTED_QTYPES/SAVE_ME_SUPPORTED_QTYPES/g s/I40E_VIRTCHNL_VF_CAP/SAVE_ME_VF_CAP/g s/I40E_VIRTCHNL_/VIRTCHNL_/g s/i40e_virtchnl_/virtchnl_/g s/i40e_vfr_/virtchnl_vfr_/g s/I40E_VFR_/VIRTCHNL_VFR_/g s/VIRTCHNL_OP_ADD_ETHER_ADDRESS/VIRTCHNL_OP_ADD_ETH_ADDR/g s/VIRTCHNL_OP_DEL_ETHER_ADDRESS/VIRTCHNL_OP_DEL_ETH_ADDR/g s/VIRTCHNL_OP_FCOE/VIRTCHNL_OP_RSVD/g s/SAVE_ME_SUPPORTED_QTYPES/I40E_VIRTCHNL_SUPPORTED_QTYPES/g s/SAVE_ME_VF_CAP/I40E_VIRTCHNL_VF_CAP/g ----8<---- Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01net/mlx5: Define interface bits for fencing UMR wqeMax Gurtovoy
HW can implement UMR wqe re-transmission in various ways. Thus, add HCA cap to distinguish the needed fence for UMR to make sure that the wqe wouldn't fail on mkey checks. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01i40e/i40evf: create and use new unified header fileJesse Brandeburg
This moves a header for i40evf to include/linux/avf/virtchnl.h. The directory name AVF is an acronym for the Intel(R) Adaptive Virtual Function. This first step creates the new file, which is a rename of drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h to include/linux/avf/virtchnl.h, and should show up in git as a rename when using git log --follow. To keep things building after the move, the changes to the i40evf driver are made to point to the new include file location. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01block: Introduce queue flag QUEUE_FLAG_SCSI_PASSTHROUGHBart Van Assche
From the context where a SCSI command is submitted it is not always possible to figure out whether or not the queue the command is submitted to has struct scsi_request as the first member of its private data. Hence introduce the flag QUEUE_FLAG_SCSI_PASSTHROUGH. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Don Brace <don.brace@microsemi.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01net-next: stmmac: Add dwmac-sun8iLABBE Corentin
The dwmac-sun8i is a heavy hacked version of stmmac hardware by allwinner. In fact the only common part is the descriptor management and the first register function. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net-next: stmmac: add optional setup functionLABBE Corentin
Instead of adding more ifthen logic for adding a new mac_device_info setup function, it is easier to add a function pointer to the function needed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Encapsulate interrupt counters in structMintz, Yuval
We already have an API struct that contains interrupt-related numbers. Use it to encapsulate all information relating to the status of SBs as (used|free). Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01of: Support const and non-const use for to_of_node()Sakari Ailus
Turn to_of_node() into a macro in order to support both const and non-const use. Additionally make the fwnode argument to is_of_node() const as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01of: Make of_fwnode_handle() saferSakari Ailus
On the expense of a little bit more complexity in the of_fwnode_handle() macro, make the macro result in NULL in case its argument is NULL while still referencing it only once. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01phy: Move ULPI phy header out of drivers to include pathVivek Gautam
Although ULPI phy is currently being used by tusb1210, there can be other consumers too in future. So move this to the includes path for phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01mtd: nand: Drop the ->errstat() hookBoris Brezillon
The ->errstat() hook is no longer implemented NAND controller drivers. Get rid of it before someone starts abusing it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-06-01mtd: nand: Pass the CS line to ->setup_data_interface()Boris Brezillon
Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface() request. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-06-01mtd: nand: add support for Micron on-die ECCThomas Petazzoni
Now that the core NAND subsystem has support for on-die ECC, this commit brings the necessary code to support on-die ECC on Micron NANDs. In micron_nand_init(), we detect if the Micron NAND chip supports on-die ECC mode, by checking a number of conditions: - It must be an ONFI NAND - It must be a SLC NAND - Enabling *and* disabling on-die ECC must work - The on-die ECC must be correcting 4 bits per 512 bytes of data. Some Micron NAND chips have an on-die ECC able to correct 8 bits per 512 bytes of data, but they work slightly differently and therefore we don't support them in this patch. Then, if the on-die ECC cannot be disabled (some Micron NAND have on-die ECC forcefully enabled), we bail out, as we don't support such NANDs. Indeed, the implementation of raw_read()/raw_write() make the assumption that on-die ECC can be disabled. Support for Micron NANDs with on-die ECC forcefully enabled can easily be added, but in the absence of such HW for testing, we preferred to simply bail out. If the on-die ECC is supported, and requested in the Device Tree, then it is indeed enabled, by using custom implementations of the ->read_page(), ->read_page_raw(), ->write_page() and ->write_page_raw() operation to properly handle the on-die ECC. In the non-raw functions, we need to enable the internal ECC engine before issuing the NAND_CMD_READ0 or NAND_CMD_SEQIN commands, which is why we set the NAND_ECC_CUSTOM_PAGE_ACCESS option at initialization time (it asks the NAND core to let the NAND driver issue those commands). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-06-01hw_random: timeriomem_rng: Allow setting RNG quality from platform dataRick Altherr
When a hw_random device's quality is non-zero, it will automatically be used to fill the kernel's entropy pool. Since timeriomem_rng is used by many different devices, the quality needs to be provided by platform data or device tree. Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-05-31dsa: add DSA switch driver for Microchip KSZ9477Woojung Huh
The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs. The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY. The SGMII port may interface to a fiber optic transceiver. This driver currently supports vlan, fdb, mdb & mirror dsa switch operations. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31phy: micrel: add Microchip KSZ 9477 Switch PHY supportWoojung Huh
Adding Microchip 9477 Phy included in KSZ9477 Switch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31bpf: teach verifier to track stack depthAlexei Starovoitov
teach verifier to track bpf program stack depth Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31bpf: free up BPF_JMP | BPF_CALL | BPF_X opcodeAlexei Starovoitov
free up BPF_JMP | BPF_CALL | BPF_X opcode to be used by actual indirect call by register and use kernel internal opcode to mark call instruction into bpf_tail_call() helper. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31pstore: Populate pstore record->time fieldKees Cook
The current time will be initially available in the record->time field for all pstore_read() and pstore_write() calls. Backends can either update the field during read(), or use the field during write() instead of fetching time themselves. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-05-30PCI: Restore PRI and PASID state after Function-Level ResetCQ Tang
After a Function-Level Reset, PCI states need to be restored. Save PASID features and PRI reqs cached. [bhelgaas: search for capability only if PRI/PASID were enabled] Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jean-Phillipe Brucker <jean-philippe.brucker@arm.com> Cc: David Woodhouse <dwmw2@infradead.org>
2017-05-30PCI: Cache PRI and PASID bits in pci_devJean-Philippe Brucker
Device drivers need to check if an IOMMU enabled ATS, PRI and PASID in order to know when they can use the SVM API. Cache PRI and PASID bits in the pci_dev structure, similarly to what is currently done for ATS. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-30net: add extack arg to lwtunnel build stateDavid Ahern
Pass extack arg down to lwtunnel_build_state and the build_state callbacks. Add messages for failures in lwtunnel_build_state, and add the extarg to nla_parse where possible in the build_state callbacks. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30iommu/dma: Fix function declarationArnd Bergmann
Newly added code in the ipmmu-vmsa driver showed a small mistake in a header file that can't be included by itself without CONFIG_IOMMU_DMA enabled: In file included from drivers/iommu/ipmmu-vmsa.c:13:0: include/linux/dma-iommu.h:105:94: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] This adds a forward declaration for 'struct device', similar to how we treat the other struct types in this case. Fixes: 3ae47292024f ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops") Fixes: 273df9635385 ("iommu/dma: Make PCI window reservation generic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-30skbuff/mac80211: introduce and use skb_put_zero()Johannes Berg
This pattern was introduced a number of times in mac80211 just now, and since it's present in a number of other places it makes sense to add a little helper for it. This just adds the helper and transforms the mac80211 code, a later patch will transform other places. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-30mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPPBoris Brezillon
A lot of drivers are providing their own ->cmdfunc(), and most of the time this implementation does not support all possible NAND operations. But since ->cmdfunc() cannot return an error code, the core has no way to know that the operation it requested is not supported. This is a problem we cannot address for all kind of operations with the current design, but we can prevent these silent failures for the GET/SET FEATURES operation by overloading the default ->onfi_{set,get}_features() methods with one returning -ENOTSUPP. Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
2017-05-30Backmerge tag 'v4.12-rc3' into drm-nextDave Airlie
Linux 4.12-rc3 Daniel has requested this for some drm-intel-next work.
2017-05-29Input: sparse-keymap - remove sparse_keymap_free()Dmitry Torokhov
Now that all users of sparse_keymap_free() are gone we can remove the stub. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-29Merge tag 'v4.12-rc3' into nextDmitry Torokhov
Sync with mainline to bring in changes in platform drovers dropping calls to sparse_keymap_free() so that we can remove it for good.
2017-05-29Merge tag 'pinctrl-v4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is an overdue pull request for pin control fixes, the most prominent feature is to make Intel Chromebooks (and I suspect any other Cherryview-based Intel thing) happy again, which we really want to see. There is a patch hitting drivers/firmware/* that I was uncertain to who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's review tags on it and I trust them both 100% to do the right thing for Intel platform drivers. Summary: - Make a few Intel Chromebooks with Cherryview DMI firmware work smoothly. - A fix for some bogus allocations in the generic group management code. - Some GPIO descriptor lookup table stubs. Merged through the pin control tree for administrative reasons. - Revert the "bi-directional" and "output-enable" generic properties: we need more discussions around this. It seems other SoCs are using input/output gate enablement and these terms are not correct. - Fix mux and drive strength atomically in the MXS driver. - Fix the SPDIF function on sunxi A83T. - OF table terminators and other small fixes" * tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Fix SPDIF function name for A83T pinctrl: mxs: atomically switch mux and drive strength config pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems firmware: dmi: Add DMI_PRODUCT_FAMILY identification string pinctrl: core: Fix warning by removing bogus code gpiolib: Add stubs for gpiod lookup table interface Revert "pinctrl: generic: Add bi-directional and output-enable" pinctrl: cherryview: Add terminate entry for dmi_system_id tables
2017-05-29Merge tag 'iio-for-4.13a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.13 cycle Two entirely new drivers in here plus the usual range of cleanups and features. New device support * ad5064 - add ltc2631, ltc2633 and ltc2635 support. * bma180 - trivial support for bma250e (new id) * hid-sensor-rotation - add relative orientation and geometric orientation support. * isl29028 - add isl29030 support (its effectively the same part from a driver point of view) * maxim_thermocouple - add max31856 id. * meson-saradc - add meson8b SoC adc support. * ti-adc084s021 - new driver and bindings. * ti-adc108s102 - new driver and bindings. Staging graduations * isl29028 Features * bma180 - ACPI enumeration for BMA250E which is used in various x86 tablets. * hi8453 - add raw access rather than only events. * hid-sensor-hub - Implement batch mode in which we can set a threshold on the amount of time between data coming from the fifos. This is the first device to do this rather than use a watershed on the number of samples. * hts221 - power management support * lsm6dsx - add system power management support. * rpr0521 - sampling frequency read / write * stm32-trigger - add support for TRG02 triggers. * tsl2583 - runtime power management support. Cleanups * core - inkern: fix a double unlock in iio_read_available_channel_raw when raw value doesn't appear to be raw (error path). - fixup accidental sizeof pointer in iio_device_add_mask_type. * docs - fix an accidental duplicated line in sysfs-bus-iio-meas-spec. * tools - use local include/uapi headers to ensure always up to date. - increase length of allowed trigger names. * ad9834 - symbolic to octal permissions. * ade7753 - symbolic to octal permissions. - fix indentation * ade7754 - symbolic to octal permissions. * ade7758 - symbolic to octal permissions. - ade7854 - symbolic to octal permissions. * as3935 - move out of storm check to given consistent results for raw and processed values. * bmp280 - fix bme280 naming in Kconfig help. * hi8435 - avoid garbage on event after enable. - add missing in_voltage_sensing_mode_available to list possible enum options. - handle the reset gpio with the obvious polarity rather than relying on DT to provide it correctly. * hid-sensors - fix a wrong error path scrubbing of return values. * hid-sensors-accel - drop static on a local variable * hid-sensors-rotation - Add missing scale and offset property parsing support. * ina2xx - Fix a bad use of GENMASK and some typos and whitespace issues. * isl29018 - only declare the ACPI table when ACPI is enabled. * isl29028 - fix proximity sleep times. * lsm6dsx - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of dealing with the various PM config variables. * meson-saradc - mark meson_sar_adc_data static and const. * rcar-gyroadc - derive the interface clock speed from the fck clock on the basis they are the same actual clock. - drop the now unused if clock from the bindings. * rpr0521 - disable sensor when marked as such rather than always enabling it. - poweroff if probe fails and we can talk to device. - make sure device powered off when it doesn't need to be on. - use sizeof rather than hardcoded size on value read. - whitespace fixup. - reorder channel numbers ready for buffered support which didn't quite make this pull request. * st-accel - fix platform data initialization to allow remove and reprobe. * st-pressure - fix platform data initialization to allow remove and reprobe. * tsl2x7x - S_IRUGO, S_IWUSR to octal values - rename driver for consistency with more recent drivers - drop FSF mailing address - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and relevant function renames. * zpa2326 - report an error for consistency with other error paths.
2017-05-29gpio: adp5588: move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Split out acpi_gpio_get_irq_resource() helperAndy Shevchenko
The helper does retrieve pointer to struct acpi_resource_gpio from struct acpi_resource if it represents GpioInt() resource. It will be used by PNP code later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: Add new flags to control sleep status of GPIOsCharles Keepax
Add new flags to allow users to specify that they are not concerned with the status of GPIOs whilst in a sleep/low power state. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 14:05:15 +0000