summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2025-03-18ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDsNiklas Cassel
Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") the ATI AHCI controllers specified board type 'board_ahci' rather than board type 'board_ahci'. This means that LPM was historically not enabled for the ATI AHCI controllers. By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason, that Samsung SSDs do not play nice with ATI AHCI controllers. (When using other AHCI controllers, NCQ can be enabled on these Samsung SSDs without issues.) In a similar way, from user reports, it is clear the ATI AHCI controllers can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected by the ATI AHCI controller even after a COMRESET.) Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g. Intel AHCI controllers, these Samsung drives appear to work perfectly fine. Considering that the combination of ATI + Samsung, for some unknown reason, does not seem to work well, disable LPM when detecting an ATI AHCI controller with a problematic Samsung SSD. Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Suggested-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Eric <eric.4.debian@grabatoulnz.fr> Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/ Tested-by: Eric <eric.4.debian@grabatoulnz.fr> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-03-18net: phy: drop phy_settings and the associated lookup helpersMaxime Chevallier
The phy_settings array is no longer relevant as it has now been replaced by the link_caps array and associated phy_caps helpers. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250307173611.129125-11-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18net: phy: phy_caps: Move phy_speeds to phy_capsMaxime Chevallier
Use the newly introduced link_capabilities array to derive the list of possible speeds when given a combination of linkmodes. As link_capabilities is indexed by speed, we don't have to iterate the whole phy_settings array. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250307173611.129125-4-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18net: ethtool: Export the link_mode_params definitionsMaxime Chevallier
link_mode_params contains a lookup table of all 802.3 link modes that are currently supported with structured data about each mode's speed, duplex, number of lanes and mediums. As a preparation for a port representation, export that table for the rest of the net stack to use. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250307173611.129125-2-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17Merge tag 'mm-hotfixes-stable-2025-03-17-20-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "15 hotfixes. 7 are cc:stable and the remainder address post-6.13 issues or aren't considered necessary for -stable kernels. 13 are for MM and the other two are for squashfs and procfs. All are singletons. Please see the individual changelogs for details" * tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/page_alloc: fix memory accept before watermarks gets initialized mm: decline to manipulate the refcount on a slab page memcg: drain obj stock on cpu hotplug teardown mm/huge_memory: drop beyond-EOF folios with the right number of refs selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT mm: memcontrol: fix swap counter leak from offline cgroup mm/vma: do not register private-anon mappings with khugepaged during mmap squashfs: fix invalid pointer dereference in squashfs_cache_delete mm/migrate: fix shmem xarray update during migration mm/hugetlb: fix surplus pages in dissolve_free_huge_page() mm/damon/core: initialize damos->walk_completed in damon_new_scheme() mm/damon: respect core layer filters' allowance decision on ops layer filemap: move prefaulting out of hot write path proc: fix UAF in proc_get_inode()
2025-03-17mm: page_alloc: defrag_mode kswapd/kcompactd watermarksJohannes Weiner
The previous patch added pageblock_order reclaim to kswapd/kcompactd, which helps, but produces only one block at a time. Allocation stalls and THP failure rates are still higher than they could be. To adequately reflect ALLOC_NOFRAGMENT demand for pageblocks, change the watermarking for kswapd & kcompactd: instead of targeting the high watermark in order-0 pages and checking for one suitable block, simply require that the high watermark is entirely met in pageblocks. To this end, track the number of free pages within contiguous pageblocks, then change pgdat_balanced() and compact_finished() to check watermarks against this new value. This further reduces THP latencies and allocation stalls, and improves THP success rates against the previous patch: DEFRAGMODE-ASYNC DEFRAGMODE-ASYNC-WMARKS Hugealloc Time mean 34300.36 ( +0.00%) 28904.00 ( -15.73%) Hugealloc Time stddev 36390.42 ( +0.00%) 33464.37 ( -8.04%) Kbuild Real time 196.13 ( +0.00%) 196.59 ( +0.23%) Kbuild User time 1234.74 ( +0.00%) 1231.67 ( -0.25%) Kbuild System time 62.62 ( +0.00%) 59.10 ( -5.54%) THP fault alloc 57054.53 ( +0.00%) 63223.67 ( +10.81%) THP fault fallback 11581.40 ( +0.00%) 5412.47 ( -53.26%) Direct compact fail 107.80 ( +0.00%) 59.07 ( -44.79%) Direct compact success 4.53 ( +0.00%) 2.80 ( -31.33%) Direct compact success rate % 3.20 ( +0.00%) 3.99 ( +18.66%) Compact daemon scanned migrate 5461033.93 ( +0.00%) 2267500.33 ( -58.48%) Compact daemon scanned free 5824897.93 ( +0.00%) 2339773.00 ( -59.83%) Compact direct scanned migrate 58336.93 ( +0.00%) 47659.93 ( -18.30%) Compact direct scanned free 32791.87 ( +0.00%) 40729.67 ( +24.21%) Compact total migrate scanned 5519370.87 ( +0.00%) 2315160.27 ( -58.05%) Compact total free scanned 5857689.80 ( +0.00%) 2380502.67 ( -59.36%) Alloc stall 2424.60 ( +0.00%) 638.87 ( -73.62%) Pages kswapd scanned 2657018.33 ( +0.00%) 4002186.33 ( +50.63%) Pages kswapd reclaimed 559583.07 ( +0.00%) 718577.80 ( +28.41%) Pages direct scanned 722094.07 ( +0.00%) 355172.73 ( -50.81%) Pages direct reclaimed 107257.80 ( +0.00%) 31162.80 ( -70.95%) Pages total scanned 3379112.40 ( +0.00%) 4357359.07 ( +28.95%) Pages total reclaimed 666840.87 ( +0.00%) 749740.60 ( +12.43%) Swap out 77238.20 ( +0.00%) 110084.33 ( +42.53%) Swap in 11712.80 ( +0.00%) 24457.00 ( +108.80%) File refaults 143438.80 ( +0.00%) 188226.93 ( +31.22%) Also of note is that compaction work overall is reduced. The reason for this is that when free pageblocks are more readily available, allocations are also much more likely to get physically placed in LRU order, instead of being forced to scavenge free space here and there. This means that reclaim by itself has better chances of freeing up whole blocks, and the system relies less on compaction. Comparing all changes to the vanilla kernel: VANILLA DEFRAGMODE-ASYNC-WMARKS Hugealloc Time mean 52739.45 ( +0.00%) 28904.00 ( -45.19%) Hugealloc Time stddev 56541.26 ( +0.00%) 33464.37 ( -40.81%) Kbuild Real time 197.47 ( +0.00%) 196.59 ( -0.44%) Kbuild User time 1240.49 ( +0.00%) 1231.67 ( -0.71%) Kbuild System time 70.08 ( +0.00%) 59.10 ( -15.45%) THP fault alloc 46727.07 ( +0.00%) 63223.67 ( +35.30%) THP fault fallback 21910.60 ( +0.00%) 5412.47 ( -75.29%) Direct compact fail 195.80 ( +0.00%) 59.07 ( -69.48%) Direct compact success 7.93 ( +0.00%) 2.80 ( -57.46%) Direct compact success rate % 3.51 ( +0.00%) 3.99 ( +10.49%) Compact daemon scanned migrate 3369601.27 ( +0.00%) 2267500.33 ( -32.71%) Compact daemon scanned free 5075474.47 ( +0.00%) 2339773.00 ( -53.90%) Compact direct scanned migrate 161787.27 ( +0.00%) 47659.93 ( -70.54%) Compact direct scanned free 163467.53 ( +0.00%) 40729.67 ( -75.08%) Compact total migrate scanned 3531388.53 ( +0.00%) 2315160.27 ( -34.44%) Compact total free scanned 5238942.00 ( +0.00%) 2380502.67 ( -54.56%) Alloc stall 2371.07 ( +0.00%) 638.87 ( -73.02%) Pages kswapd scanned 2160926.73 ( +0.00%) 4002186.33 ( +85.21%) Pages kswapd reclaimed 533191.07 ( +0.00%) 718577.80 ( +34.77%) Pages direct scanned 400450.33 ( +0.00%) 355172.73 ( -11.31%) Pages direct reclaimed 94441.73 ( +0.00%) 31162.80 ( -67.00%) Pages total scanned 2561377.07 ( +0.00%) 4357359.07 ( +70.12%) Pages total reclaimed 627632.80 ( +0.00%) 749740.60 ( +19.46%) Swap out 47959.53 ( +0.00%) 110084.33 ( +129.53%) Swap in 7276.00 ( +0.00%) 24457.00 ( +236.10%) File refaults 138043.00 ( +0.00%) 188226.93 ( +36.35%) THP allocation latencies and %sys time are down dramatically. THP allocation failures are down from nearly 50% to 8.5%. And to recall previous data points, the success rates are steady and reliable without the cumulative deterioration of fragmentation events. Compaction work is down overall. Direct compaction work especially is drastically reduced. As an aside, its success rate of 4% indicates there is room for improvement. For now it's good to rely on it less. Reclaim work is up overall, however direct reclaim work is down. Part of the increase can be attributed to a higher use of THPs, which due to internal fragmentation increase the memory footprint. This is not necessarily an unexpected side-effect for users of THP. However, taken both points together, there may well be some opportunities for fine tuning in the reclaim/compaction coordination. [hannes@cmpxchg.org: fix squawks from rebasing] Link: https://lkml.kernel.org/r/20250314210558.GD1316033@cmpxchg.org Link: https://lkml.kernel.org/r/20250313210647.1314586-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: compaction: push watermark into compaction_suitable() callersJohannes Weiner
Patch series "mm: reliable huge page allocator". This series makes changes to the allocator and reclaim/compaction code to try harder to avoid fragmentation. As a result, this makes huge page allocations cheaper, more reliable and more sustainable. It's a subset of the huge page allocator RFC initially proposed here: https://lore.kernel.org/lkml/20230418191313.268131-1-hannes@cmpxchg.org/ The following results are from a kernel build test, with additional concurrent bursts of THP allocations on a memory-constrained system. Comparing before and after the changes over 15 runs: before after Hugealloc Time mean 52739.45 ( +0.00%) 28904.00 ( -45.19%) Hugealloc Time stddev 56541.26 ( +0.00%) 33464.37 ( -40.81%) Kbuild Real time 197.47 ( +0.00%) 196.59 ( -0.44%) Kbuild User time 1240.49 ( +0.00%) 1231.67 ( -0.71%) Kbuild System time 70.08 ( +0.00%) 59.10 ( -15.45%) THP fault alloc 46727.07 ( +0.00%) 63223.67 ( +35.30%) THP fault fallback 21910.60 ( +0.00%) 5412.47 ( -75.29%) Direct compact fail 195.80 ( +0.00%) 59.07 ( -69.48%) Direct compact success 7.93 ( +0.00%) 2.80 ( -57.46%) Direct compact success rate % 3.51 ( +0.00%) 3.99 ( +10.49%) Compact daemon scanned migrate 3369601.27 ( +0.00%) 2267500.33 ( -32.71%) Compact daemon scanned free 5075474.47 ( +0.00%) 2339773.00 ( -53.90%) Compact direct scanned migrate 161787.27 ( +0.00%) 47659.93 ( -70.54%) Compact direct scanned free 163467.53 ( +0.00%) 40729.67 ( -75.08%) Compact total migrate scanned 3531388.53 ( +0.00%) 2315160.27 ( -34.44%) Compact total free scanned 5238942.00 ( +0.00%) 2380502.67 ( -54.56%) Alloc stall 2371.07 ( +0.00%) 638.87 ( -73.02%) Pages kswapd scanned 2160926.73 ( +0.00%) 4002186.33 ( +85.21%) Pages kswapd reclaimed 533191.07 ( +0.00%) 718577.80 ( +34.77%) Pages direct scanned 400450.33 ( +0.00%) 355172.73 ( -11.31%) Pages direct reclaimed 94441.73 ( +0.00%) 31162.80 ( -67.00%) Pages total scanned 2561377.07 ( +0.00%) 4357359.07 ( +70.12%) Pages total reclaimed 627632.80 ( +0.00%) 749740.60 ( +19.46%) Swap out 47959.53 ( +0.00%) 110084.33 ( +129.53%) Swap in 7276.00 ( +0.00%) 24457.00 ( +236.10%) File refaults 138043.00 ( +0.00%) 188226.93 ( +36.35%) THP latencies are cut in half, and failure rates are cut by 75%. These metrics also hold up over time, while the vanilla kernel sees a steady downward trend in success rates with each subsequent run, owed to the cumulative effects of fragmentation. A more detailed discussion of results is in the patch changelogs. The patches first introduce a vm.defrag_mode sysctl, which enforces the existing ALLOC_NOFRAGMENT alloc flag until after reclaim and compaction have run. They then change kswapd and kcompactd to target pageblocks, which boosts success in the ALLOC_NOFRAGMENT hotpaths. Patches #1 and #2 are somewhat unrelated cleanups, but touch the same code and so are included here to avoid conflicts from re-ordering. This patch (of 5): compaction_suitable() hardcodes the min watermark, with a boost to the low watermark for costly orders. However, compaction_ready() requires order-0 at the high watermark. It currently checks the marks twice. Make the watermark a parameter to compaction_suitable() and have the callers pass in what they require: - compaction_zonelist_suitable() is used by the direct reclaim path, so use the min watermark. - compact_suit_allocation_order() has a watermark in context derived from cc->alloc_flags. The only quirk is that kcompactd doesn't initialize cc->alloc_flags explicitly. There is a direct check in kcompactd_do_work() that passes ALLOC_WMARK_MIN, but there is another check downstack in compact_zone() that ends up passing the unset alloc_flags. Since they default to 0, and that coincides with ALLOC_WMARK_MIN, it is correct. But it's subtle. Set cc->alloc_flags explicitly. - should_continue_reclaim() is direct reclaim, use the min watermark. - Finally, consolidate the two checks in compaction_ready() to a single compaction_suitable() call passing the high watermark. There is a tiny change in behavior: before, compaction_suitable() would check order-0 against min or low, depending on costly order. Then there'd be another high watermark check. Now, the high watermark is passed to compaction_suitable(), and the costly order-boost (low - min) is added on top. This means compaction_ready() sets a marginally higher target for free pages. In a kernelbuild + THP pressure test, though, this didn't show any measurable negative effects on memory pressure or reclaim rates. As the comment above the check says, reclaim is usually stopped short on should_continue_reclaim(), and this just defines the worst-case reclaim cutoff in case compaction is not making any headway. [hughd@google.com: stop oops on out-of-range highest_zoneidx] Link: https://lkml.kernel.org/r/005ace8b-07fa-01d4-b54b-394a3e029c07@google.com Link: https://lkml.kernel.org/r/20250313210647.1314586-1-hannes@cmpxchg.org Link: https://lkml.kernel.org/r/20250313210647.1314586-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17drivers/base/memory: correct the field name in the headerGavin Shan
Replace @blocks with @memory_blocks to match with the definition of struct memory_group. Link: https://lkml.kernel.org/r/20250311233045.148943-3-gshan@redhat.com Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17drivers/base/memory: improve add_boot_memory_block()Gavin Shan
Patch series "drivers/base/memory: Two cleanups", v3. Two cleanups to drivers/base/memory. This patch (of 2)L It's unnecessary to count the present sections for the specified block since the block will be added if any section in the block is present. Besides, for_each_present_section_nr() can be reused as Andrew Morton suggested. Improve by using for_each_present_section_nr() and dropping the unnecessary @section_count. No functional changes intended. Link: https://lkml.kernel.org/r/20250311233045.148943-1-gshan@redhat.com Link: https://lkml.kernel.org/r/20250311233045.148943-2-gshan@redhat.com Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/filemap: use xas_try_split() in __filemap_add_folio()Zi Yan
Patch series "Minimize xa_node allocation during xarry split", v3. When splitting a multi-index entry in XArray from order-n to order-m, existing xas_split_alloc()+xas_split() approach requires 2^(n % XA_CHUNK_SHIFT) xa_node allocations. But its callers, __filemap_add_folio() and shmem_split_large_entry(), use at most 1 xa_node. To minimize xa_node allocation and remove the limitation of no split from order-12 (or above) to order-0 (or anything between 0 and 5)[1], xas_try_split() was added[2], which allocates (n / XA_CHUNK_SHIFT - m / XA_CHUNK_SHIFT) xa_node. It is used for non-uniform folio split, but can be used by __filemap_add_folio() and shmem_split_large_entry(). xas_split_alloc() and xas_split() split an order-9 to order-0: --------------------------------- | | | | | | | | | | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | | | | | | | | | | --------------------------------- | | | | ------- --- --- ------- | | ... | | V V V V ----------- ----------- ----------- ----------- | xa_node | | xa_node | ... | xa_node | | xa_node | ----------- ----------- ----------- ----------- xas_try_split() splits an order-9 to order-0: --------------------------------- | | | | | | | | | | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | | | | | | | | | | --------------------------------- | | V ----------- | xa_node | ----------- xas_try_split() is designed to be called iteratively with n = m + 1. xas_try_split_mini_order() is added to minmize the number of calls to xas_try_split() by telling the caller the next minimal order to split to instead of n - 1. Splitting order-n to order-m when m= l * XA_CHUNK_SHIFT does not require xa_node allocation and requires 1 xa_node when n=l * XA_CHUNK_SHIFT and m = n - 1, so it is OK to use xas_try_split() with n > m + 1 when no new xa_node is needed. xfstests quick group test passed on xfs and tmpfs. [1] https://lore.kernel.org/linux-mm/Z6YX3RznGLUD07Ao@casper.infradead.org/ [2] https://lore.kernel.org/linux-mm/20250226210032.2044041-1-ziy@nvidia.com/ This patch (of 2): During __filemap_add_folio(), a shadow entry is covering n slots and a folio covers m slots with m < n is to be added. Instead of splitting all n slots, only the m slots covered by the folio need to be split and the remaining n-m shadow entries can be retained with orders ranging from m to n-1. This method only requires (n/XA_CHUNK_SHIFT) - (m/XA_CHUNK_SHIFT) new xa_nodes instead of (n % XA_CHUNK_SHIFT) * ((n/XA_CHUNK_SHIFT) - (m/XA_CHUNK_SHIFT)) new xa_nodes, compared to the original xas_split_alloc() + xas_split() one. For example, to insert an order-0 folio when an order-9 shadow entry is present (assuming XA_CHUNK_SHIFT is 6), 1 xa_node is needed instead of 8. xas_try_split_min_order() is introduced to reduce the number of calls to xas_try_split() during split. Link: https://lkml.kernel.org/r/20250314222113.711703-1-ziy@nvidia.com Link: https://lkml.kernel.org/r/20250314222113.711703-2-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mattew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/truncate: use folio_split() in truncate operationZi Yan
Instead of splitting the large folio uniformly during truncation, try to use buddy allocator like folio_split() at the start and the end of a truncation range to minimize the number of resulting folios if it is supported. try_folio_split() is introduced to use folio_split() if supported and it falls back to uniform split otherwise. For example, to truncate a order-4 folio [0, 1, 2, 3, 4, 5, ..., 15] between [3, 10] (inclusive), folio_split() splits the folio at 3 to [0,1], [2], [3], [4..7], [8..15] and [3], [4..7] can be dropped and [8..15] is kept with zeros in [8..10], then another folio_split() is done at 10, so [8..10] can be dropped. One possible optimization is to make folio_split() to split a folio based on a given range, like [3..10] above. But that complicates folio_split(), so it will be investigated when necessary. Link: https://lkml.kernel.org/r/20250226210032.2044041-8-ziy@nvidia.com Link: https://lkml.kernel.org/r/20250307174001.242794-8-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Kairui Song <kasong@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17xarray: add xas_try_split() to split a multi-index entryZi Yan
Patch series "Buddy allocator like (or non-uniform) folio split", v10. This patchset adds a new buddy allocator like (or non-uniform) large folio split from a order-n folio to order-m with m < n. It reduces 1. the total number of after-split folios from 2^(n-m) to n-m+1; 2. the amount of memory needed for multi-index xarray split from 2^(n/6-m/6) to n/6-m/6, assuming XA_CHUNK_SHIFT=6; 3. keep more large folios after a split from all order-m folios to order-(n-1) to order-m folios. For example, to split an order-9 to order-0, folio split generates 10 (or 11 for anonymous memory) folios instead of 512, allocates 1 xa_node instead of 8, and leaves 1 order-8, 1 order-7, ..., 1 order-1 and 2 order-0 folios (or 4 order-0 for anonymous memory) instead of 512 order-0 folios. Instead of duplicating existing split_huge_page*() code, __folio_split() is introduced as the shared backend code for both split_huge_page_to_list_to_order() and folio_split(). __folio_split() can support both uniform split and buddy allocator like (or non-uniform) split. All existing split_huge_page*() users can be gradually converted to use folio_split() if possible. In this patchset, I converted truncate_inode_partial_folio() to use folio_split(). xfstests quick group passed for both tmpfs and xfs. I also semi-replicated Hugh's test[12] and ran it without any issue for almost 24 hours. This patch (of 8): A preparation patch for non-uniform folio split, which always split a folio into half iteratively, and minimal xarray entry split. Currently, xas_split_alloc() and xas_split() always split all slots from a multi-index entry. They cost the same number of xa_node as the to-be-split slots. For example, to split an order-9 entry, which takes 2^(9-6)=8 slots, assuming XA_CHUNK_SHIFT is 6 (!CONFIG_BASE_SMALL), 8 xa_node are needed. Instead xas_try_split() is intended to be used iteratively to split the order-9 entry into 2 order-8 entries, then split one order-8 entry, based on the given index, to 2 order-7 entries, ..., and split one order-1 entry to 2 order-0 entries. When splitting the order-6 entry and a new xa_node is needed, xas_try_split() will try to allocate one if possible. As a result, xas_try_split() would only need 1 xa_node instead of 8. When a new xa_node is needed during the split, xas_try_split() can try to allocate one but no more. -ENOMEM will be return if a node cannot be allocated. -EINVAL will be return if a sibling node is split or cascade split happens, where two or more new nodes are needed, and these are not supported by xas_try_split(). xas_split_alloc() and xas_split() split an order-9 to order-0: --------------------------------- | | | | | | | | | | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | | | | | | | | | | --------------------------------- | | | | ------- --- --- ------- | | ... | | V V V V ----------- ----------- ----------- ----------- | xa_node | | xa_node | ... | xa_node | | xa_node | ----------- ----------- ----------- ----------- xas_try_split() splits an order-9 to order-0: --------------------------------- | | | | | | | | | | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | | | | | | | | | | --------------------------------- | | V ----------- | xa_node | ----------- Link: https://lkml.kernel.org/r/20250307174001.242794-1-ziy@nvidia.com Link: https://lkml.kernel.org/r/20250307174001.242794-2-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Kairui Song <kasong@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: page_ext: add an iteration API for page extensionsLuiz Capitulino
Patch series "mm: page_ext: Introduce new iteration API", v3. Introduction ============ [ Thanks to David Hildenbrand for identifying the root cause of this issue and proving guidance on how to fix it. The new API idea, bugs and misconceptions are all mine though ] Currently, trying to reserve 1G pages with page_owner=on and sparsemem causes a crash. The reproducer is very simple: 1. Build the kernel with CONFIG_SPARSEMEM=y and the table extensions 2. Pass 'default_hugepagesz=1 page_owner=on' in the kernel command-line 3. Reserve one 1G page at run-time, this should crash (see patch 1 for backtrace) [ A crash with page_table_check is also possible, but harder to trigger ] Apparently, starting with commit cf54f310d0d3 ("mm/hugetlb: use __GFP_COMP for gigantic folios") we now pass the full allocation order to page extension clients and the page extension implementation assumes that all PFNs of an allocation range will be stored in the same memory section (which is not true for 1G pages). To fix this, this series introduces a new iteration API for page extension objects. The API checks if the next page extension object can be retrieved from the current section or if it needs to look up for it in another section. Please, find all details in patch 1. I tested this series on arm64 and x86 by reserving 1G pages at run-time and doing kernel builds (always with page_owner=on and page_table_check=on). This patch (of 3): The page extension implementation assumes that all page extensions of a given page order are stored in the same memory section. The function page_ext_next() relies on this assumption by adding an offset to the current object to return the next adjacent page extension. This behavior works as expected for flatmem but fails for sparsemem when using 1G pages. The commit cf54f310d0d3 ("mm/hugetlb: use __GFP_COMP for gigantic folios") exposes this issue, making it possible for a crash when using page_owner or page_table_check page extensions. The problem is that for 1G pages, the page extensions may span memory section boundaries and be stored in different memory sections. This issue was not visible before commit cf54f310d0d3 ("mm/hugetlb: use __GFP_COMP for gigantic folios") because alloc_contig_pages() never passed more than MAX_PAGE_ORDER to post_alloc_hook(). However, the series introducing mentioned commit changed this behavior allowing the full 1G page order to be passed. Reproducer: 1. Build the kernel with CONFIG_SPARSEMEM=y and table extensions support 2. Pass 'default_hugepagesz=1 page_owner=on' in the kernel command-line 3. Reserve one 1G page at run-time, this should crash (backtrace below) To address this issue, this commit introduces a new API for iterating through page extensions. The main iteration macro is for_each_page_ext() and it must be called with the RCU read lock taken. Here's an usage example: """ struct page_ext_iter iter; struct page_ext *page_ext; ... rcu_read_lock(); for_each_page_ext(page, 1 << order, page_ext, iter) { struct my_page_ext *obj = get_my_page_ext_obj(page_ext); ... } rcu_read_unlock(); """ The loop construct uses page_ext_iter_next() which checks to see if we have crossed sections in the iteration. In this case, page_ext_iter_next() retrieves the next page_ext object from another section. Thanks to David Hildenbrand for helping identify the root cause and providing suggestions on how to fix and optmize the solution (final implementation and bugs are all mine through). Lastly, here's the backtrace, without kasan you can get random crashes: [ 76.052526] BUG: KASAN: slab-out-of-bounds in __update_page_owner_handle+0x238/0x298 [ 76.060283] Write of size 4 at addr ffff07ff96240038 by task tee/3598 [ 76.066714] [ 76.068203] CPU: 88 UID: 0 PID: 3598 Comm: tee Kdump: loaded Not tainted 6.13.0-rep1 #3 [ 76.076202] Hardware name: WIWYNN Mt.Jade Server System B81.030Z1.0007/Mt.Jade Motherboard, BIOS 2.10.20220810 (SCP: 2.10.20220810) 2022/08/10 [ 76.088972] Call trace: [ 76.091411] show_stack+0x20/0x38 (C) [ 76.095073] dump_stack_lvl+0x80/0xf8 [ 76.098733] print_address_description.constprop.0+0x88/0x398 [ 76.104476] print_report+0xa8/0x278 [ 76.108041] kasan_report+0xa8/0xf8 [ 76.111520] __asan_report_store4_noabort+0x20/0x30 [ 76.116391] __update_page_owner_handle+0x238/0x298 [ 76.121259] __set_page_owner+0xdc/0x140 [ 76.125173] post_alloc_hook+0x190/0x1d8 [ 76.129090] alloc_contig_range_noprof+0x54c/0x890 [ 76.133874] alloc_contig_pages_noprof+0x35c/0x4a8 [ 76.138656] alloc_gigantic_folio.isra.0+0x2c0/0x368 [ 76.143616] only_alloc_fresh_hugetlb_folio.isra.0+0x24/0x150 [ 76.149353] alloc_pool_huge_folio+0x11c/0x1f8 [ 76.153787] set_max_huge_pages+0x364/0xca8 [ 76.157961] __nr_hugepages_store_common+0xb0/0x1a0 [ 76.162829] nr_hugepages_store+0x108/0x118 [ 76.167003] kobj_attr_store+0x3c/0x70 [ 76.170745] sysfs_kf_write+0xfc/0x188 [ 76.174492] kernfs_fop_write_iter+0x274/0x3e0 [ 76.178927] vfs_write+0x64c/0x8e0 [ 76.182323] ksys_write+0xf8/0x1f0 [ 76.185716] __arm64_sys_write+0x74/0xb0 [ 76.189630] invoke_syscall.constprop.0+0xd8/0x1e0 [ 76.194412] do_el0_svc+0x164/0x1e0 [ 76.197891] el0_svc+0x40/0xe0 [ 76.200939] el0t_64_sync_handler+0x144/0x168 [ 76.205287] el0t_64_sync+0x1ac/0x1b0 Link: https://lkml.kernel.org/r/cover.1741301089.git.luizcap@redhat.com Link: https://lkml.kernel.org/r/a45893880b7e1601082d39d2c5c8b50bcc096305.1741301089.git.luizcap@redhat.com Fixes: cf54f310d0d3 ("mm/hugetlb: use __GFP_COMP for gigantic folios") Signed-off-by: Luiz Capitulino <luizcap@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Luiz Capitulino <luizcap@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon: remove damon_operations->reset_aggregatedSeongJae Park
The operations layer hook was introduced to let operations set do any aggregation data reset if needed. But it is not really be used now. Remove it. Link: https://lkml.kernel.org/r/20250306175908.66300-14-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon: remove damon_callback->before_damos_applySeongJae Park
The hook was introduced to let DAMON kernel API users access DAMOS schemes-eligible regions in a safe way. Now it is no more used by anyone, and the functionality is provided in a better way by damos_walk(). Remove it. Link: https://lkml.kernel.org/r/20250306175908.66300-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon: remove damon_callback->after_samplingSeongJae Park
The callback was used by DAMON sysfs interface for reading DAMON internal data. But it is no more being used, and damon_call() can do similar works in a better way. Remove it. Link: https://lkml.kernel.org/r/20250306175908.66300-12-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon: remove ->before_start of damon_callbackSeongJae Park
The function pointer field was added to be used as a place to do some initialization works just before DAMON starts working. However, nobody is using it now. Remove it. Link: https://lkml.kernel.org/r/20250306175908.66300-11-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon: remove damon_callback->privateSeongJae Park
The field was added to let users keep their personal data to use inside of the callbacks. However, no one is actively using that now. Remove it. Link: https://lkml.kernel.org/r/20250306175908.66300-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17arch, mm: make releasing of memory to page allocator more explicitMike Rapoport (Microsoft)
The point where the memory is released from memblock to the buddy allocator is hidden inside arch-specific mem_init()s and the call to memblock_free_all() is needlessly duplicated in every artiste cure and after introduction of arch_mm_preinit() hook, mem_init() implementation on many architecture only contains the call to memblock_free_all(). Pull memblock_free_all() call into mm_core_init() and drop mem_init() on relevant architectures to make it more explicit where the free memory is released from memblock to the buddy allocator and to reduce code duplication in architecture specific code. Link: https://lkml.kernel.org/r/20250313135003.836600-14-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17arch, mm: introduce arch_mm_preinitMike Rapoport (Microsoft)
Currently, implementation of mem_init() in every architecture consists of one or more of the following: * initializations that must run before page allocator is active, for instance swiotlb_init() * a call to memblock_free_all() to release all the memory to the buddy allocator * initializations that must run after page allocator is ready and there is no arch-specific hook other than mem_init() for that, like for example register_page_bootmem_info() in x86 and sparc64 or simple setting of mem_init_done = 1 in several architectures * a bunch of semi-related stuff that apparently had no better place to live, for example a ton of BUILD_BUG_ON()s in parisc. Introduce arch_mm_preinit() that will be the first thing called from mm_core_init(). On architectures that have initializations that must happen before the page allocator is ready, move those into arch_mm_preinit() along with the code that does not depend on ordering with page allocator setup. On several architectures this results in reduction of mem_init() to a single call to memblock_free_all() that allows its consolidation next. Link: https://lkml.kernel.org/r/20250313135003.836600-13-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17arch, mm: streamline HIGHMEM freeingMike Rapoport (Microsoft)
All architectures that support HIGHMEM have their code that frees high memory pages to the buddy allocator while __free_memory_core() is limited to freeing only low memory. There is no actual reason for that. The memory map is completely ready by the time memblock_free_all() is called and high pages can be released to the buddy allocator along with low memory. Remove low memory limit from __free_memory_core() and drop per-architecture code that frees high memory pages. Link: https://lkml.kernel.org/r/20250313135003.836600-12-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17arch, mm: set max_mapnr when allocating memory map for FLATMEMMike Rapoport (Microsoft)
max_mapnr is essentially the size of the memory map for systems that use FLATMEM. There is no reason to calculate it in each and every architecture when it's anyway calculated in alloc_node_mem_map(). Drop setting of max_mapnr from architecture code and set it once in alloc_node_mem_map(). While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so there won't be two copies for MMU and !MMU variants. Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17page_io: zswap: do not crash the kernel on decompression failureNhat Pham
Currently, we crash the kernel when a decompression failure occurs in zswap (either because of memory corruption, or a bug in the compression algorithm). This is overkill. We should only SIGBUS the unfortunate process asking for the zswap entry on zswap load, and skip the corrupted entry in zswap writeback. See [1] for a recent upstream discussion about this. The zswap writeback case is relatively straightforward to fix. For the zswap_load() case, we change the return behavior: * Return 0 on success. * Return -ENOENT (with the folio locked) if zswap does not own the swapped out content. * Return -EIO if zswap owns the swapped out content, but encounters a decompression failure for some reasons. The folio will be unlocked, but not be marked up-to-date, which will eventually cause the process requesting the page to SIGBUS (see the handling of not-up-to-date folio in do_swap_page() in mm/memory.c), without crashing the kernel. * Return -EINVAL if we encounter a large folio, as large folio should not be swapped in while zswap is being used. Similar to the -EIO case, we also unlock the folio but do not mark it as up-to-date to SIGBUS the faulting process. As a side effect, we require one extra zswap tree traversal in the load and writeback paths. Quick benchmarking on a kernel build test shows no performance difference: With the new scheme: real: mean: 125.1s, stdev: 0.12s user: mean: 3265.23s, stdev: 9.62s sys: mean: 2156.41s, stdev: 13.98s The old scheme: real: mean: 125.78s, stdev: 0.45s user: mean: 3287.18s, stdev: 5.95s sys: mean: 2177.08s, stdev: 26.52s [nphamcs@gmail.com: fix documentation of zswap_load()] Link: https://lkml.kernel.org/r/20250306222453.1269456-1-nphamcs@gmail.com Link: https://lore.kernel.org/all/ZsiLElTykamcYZ6J@casper.infradead.org/ [1] Link: https://lkml.kernel.org/r/20250306205011.784787-1-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Yosry Ahmed <yosry.ahmed@linux.dev> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/damon/core: expose damos_filter_for_ops() to DAMON kernel API callersSeongJae Park
damos_filter_for_ops() can be useful to avoid putting wrong type of filters in wrong place. Make it be exposed to DAMON kernel API callers. Link: https://lkml.kernel.org/r/20250305222733.59089-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: stop maintaining the per-page mapcount of large folios ↵David Hildenbrand
(CONFIG_NO_PAGE_MAPCOUNT) Everything is in place to stop using the per-page mapcounts in large folios: the mapcount of tail pages will always be logically 0 (-1 value), just like it currently is for hugetlb folios already, and the page mapcount of the head page is either 0 (-1 value) or contains a page type (e.g., hugetlb). Maintaining _nr_pages_mapped without per-page mapcounts is impossible, so that one also has to go with CONFIG_NO_PAGE_MAPCOUNT. There are two remaining implications: (1) Per-node, per-cgroup and per-lruvec stats of "NR_ANON_MAPPED" ("mapped anonymous memory") and "NR_FILE_MAPPED" ("mapped file memory"): As soon as any page of the folio is mapped -- folio_mapped() -- we now account the complete folio as mapped. Once the last page is unmapped -- !folio_mapped() -- we account the complete folio as unmapped. This implies that ... * "AnonPages" and "Mapped" in /proc/meminfo and /sys/devices/system/node/*/meminfo * cgroup v2: "anon" and "file_mapped" in "memory.stat" and "memory.numa_stat" * cgroup v1: "rss" and "mapped_file" in "memory.stat" and "memory.numa_stat ... can now appear higher than before. But note that these folios do consume that memory, simply not all pages are actually currently mapped. It's worth nothing that other accounting in the kernel (esp. cgroup charging on allocation) is not affected by this change. [why oh why is "anon" called "rss" in cgroup v1] (2) Detecting partial mappings Detecting whether anon THPs are partially mapped gets a bit more unreliable. As long as a single MM maps such a large folio ("exclusively mapped"), we can reliably detect it. Especially before fork() / after a short-lived child process quit, we will detect partial mappings reliably, which is the common case. In essence, if the average per-page mapcount in an anon THP is < 1, we know for sure that we have a partial mapping. However, as soon as multiple MMs are involved, we might miss detecting partial mappings: this might be relevant with long-lived child processes. If we have a fully-mapped anon folio before fork(), once our child processes and our parent all unmap (zap/COW) the same pages (but not the complete folio), we might not detect the partial mapping. However, once the child processes quit we would detect the partial mapping. How relevant this case is in practice remains to be seen. Swapout/migration will likely mitigate this. In the future, RMAP walkers could check for that for that case (e.g., when collecting access bits during reclaim) and simply flag them for deferred-splitting. Link: https://lkml.kernel.org/r/20250303163014.1128035-21-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: convert folio_likely_mapped_shared() to folio_maybe_mapped_shared()David Hildenbrand
Let's reuse our new MM ownership tracking infrastructure for large folios to make folio_likely_mapped_shared() never return false negatives -- never indicating "not mapped shared" although the folio *is* mapped shared. With that, we can rename it to folio_maybe_mapped_shared() and get rid of the dependency on the mapcount of the first folio page. The semantics are now arguably clearer: no mixture of "false negatives" and "false positives", only the remaining possibility for "false positives". Thoroughly document the new semantics. We might now detect that a large folio is "maybe mapped shared" although it *no longer* is -- but once was. Now, if more than two MMs mapped a folio at the same time, and the MM mapping the folio exclusively at the end is not one tracked in the two folio MM slots, we will detect the folio as "maybe mapped shared". For anonymous folios, usually (except weird corner cases) all PTEs that target a "maybe mapped shared" folio are R/O. As soon as a child process would write to them (iow, actively use them), we would CoW and effectively replace these PTEs. Most cases (below) are not expected to really matter with large anonymous folios for this reason. Most importantly, there will be no change at all for: * small folios * hugetlb folios * PMD-mapped PMD-sized THPs (single mapping) This change has the potential to affect existing callers of folio_likely_mapped_shared() -> folio_maybe_mapped_shared(): (1) fs/proc/task_mmu.c: no change (hugetlb) (2) khugepaged counts PTEs that target shared folios towards max_ptes_shared (default: HPAGE_PMD_NR / 2), meaning we could skip a collapse where we would have previously collapsed. This only applies to anonymous folios and is not expected to matter in practice. Worth noting that this change sorts out case (A) documented in commit 1bafe96e89f0 ("mm/khugepaged: replace page_mapcount() check by folio_likely_mapped_shared()") by removing the possibility for "false negatives". (3) MADV_COLD / MADV_PAGEOUT / MADV_FREE will not try splitting PTE-mapped THPs that are considered shared but not fully covered by the requested range, consequently not processing them. PMD-mapped PMD-sized THP are not affected, or when all PTEs are covered. These functions are usually only called on anon/file folios that are exclusively mapped most of the time (no other file mappings or no fork()), so the "false negatives" are not expected to matter in practice. (4) mbind() / migrate_pages() / move_pages() will refuse to migrate shared folios unless MPOL_MF_MOVE_ALL is effective (requires CAP_SYS_NICE). We will now reject some folios that could be migrated. Similar to (3), especially with MPOL_MF_MOVE_ALL, so this is not expected to matter in practice. Note that cpuset_migrate_mm_workfn() calls do_migrate_pages() with MPOL_MF_MOVE_ALL. (5) NUMA hinting mm/migrate.c:migrate_misplaced_folio_prepare() will skip file folios that are probably shared libraries (-> "mapped shared" and executable). This check would have detected it as a shared library at some point (at least 3 MMs mapping it), so detecting it afterwards does not sound wrong (still a shared library). Not expected to matter. mm/memory.c:numa_migrate_check() will indicate TNF_SHARED in MAP_SHARED file mappings when encountering a shared folio. Similar reasoning, not expected to matter. mm/mprotect.c:change_pte_range() will skip folios detected as shared in CoW mappings. Similarly, this is not expected to matter in practice, but if it would ever be a problem we could relax that check a bit (e.g., basing it on the average page-mapcount in a folio), because it was only an optimization when many (e.g., 288) processes were mapping the same folios -- see commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages.") (6) mm/rmap.c:folio_referenced_one() will skip exclusive swapbacked folios in dying processes. Applies to anonymous folios only. Without "false negatives", we'll now skip all actually shared ones. Skipping ones that are actually exclusive won't really matter, it's a pure optimization, and is not expected to matter in practice. In theory, one can detect the problematic scenario: folio_mapcount() > 0 and no folio MM slot is occupied ("state unknown"). One could reset the MM slots while doing an rmap walk, which migration / folio split already do when setting everything up. Further, when batching PTEs we might naturally learn about a owner (e.g., folio_mapcount() == nr_ptes) and could update the owner. However, we'll defer that until the scenarios where it would really matter are clear. Link: https://lkml.kernel.org/r/20250303163014.1128035-15-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/rmap: basic MM owner tracking for large folios (!hugetlb)David Hildenbrand
For small folios, we traditionally use the mapcount to decide whether it was "certainly mapped exclusively" by a single MM (mapcount == 1) or whether it "maybe mapped shared" by multiple MMs (mapcount > 1). For PMD-sized folios that were PMD-mapped, we were able to use a similar mechanism (single PMD mapping), but for PTE-mapped folios and in the future folios that span multiple PMDs, this does not work. So we need a different mechanism to handle large folios. Let's add a new mechanism to detect whether a large folio is "certainly mapped exclusively", or whether it is "maybe mapped shared". We'll use this information next to optimize CoW reuse for PTE-mapped anonymous THP, and to convert folio_likely_mapped_shared() to folio_maybe_mapped_shared(), independent of per-page mapcounts. For each large folio, we'll have two slots, whereby a slot stores: (1) an MM id: unique id assigned to each MM (2) a per-MM mapcount If a slot is unoccupied, it can be taken by the next MM that maps folio page. In addition, we'll remember the current state -- "mapped exclusively" vs. "maybe mapped shared" -- and use a bit spinlock to sync on updates and to reduce the total number of atomic accesses on updates. In the future, it might be possible to squeeze a proper spinlock into "struct folio". For now, keep it simple, as we require the whole thing with THP only, that is incompatible with RT. As we have to squeeze this information into the "struct folio" of even folios of order-1 (2 pages), and we generally want to reduce the required metadata, we'll assign each MM a unique ID that can fit into an int. In total, we can squeeze everything into 4x int (2x long) on 64bit. 32bit support is a bit challenging, because we only have 2x long == 2x int in order-1 folios. But we can make it work for now, because we neither expect many MMs nor very large folios on 32bit. We will reliably detect folios as "mapped exclusively" vs. "mapped shared" as long as only two MMs map pages of a folio at one point in time -- for example with fork() and short-lived child processes, or with apps that hand over state from one instance to another. As soon as three MMs are involved at the same time, we might detect "maybe mapped shared" although the folio is "mapped exclusively". Example 1: (1) App1 faults in a (shmem/file-backed) folio page -> Tracked as MM0 (2) App2 faults in a folio page -> Tracked as MM1 (4) App1 unmaps all folio pages -> We will detect "mapped exclusively". Example 2: (1) App1 faults in a (shmem/file-backed) folio page -> Tracked as MM0 (2) App2 faults in a folio page -> Tracked as MM1 (3) App3 faults in a folio page -> No slot available, tracked as "unknown" (4) App1 and App2 unmap all folio pages -> We will detect "maybe mapped shared". Make use of __always_inline to keep possible performance degradation when (un)mapping large folios to a minimum. Note: by squeezing the two flags into the "unsigned long" that stores the MM ids, we can use non-atomic __bit_spin_unlock() and non-atomic setting/clearing of the "maybe mapped shared" bit, effectively not adding any new atomics on the hot path when updating the large mapcount + new metadata, which further helps reduce the runtime overhead in micro-benchmarks. Link: https://lkml.kernel.org/r/20250303163014.1128035-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17bit_spinlock: __always_inline (un)lock functionsDavid Hildenbrand
The compiler might decide that it is a smart idea to not inline bit_spin_lock(), primarily when a couple of functions in the same file end up calling it. Especially when used in RMAP map/unmap code next, the compiler sometimes decides to not inline, which is then observable in some micro-benchmarks. Let's simply flag all lock/unlock functions as __always_inline; arch_test_and_set_bit_lock() and friends are already tagged like that (but not test_and_set_bit_lock() for some reason). If ever a problem, we could split it into a fast and a slow path, and only force the fast path to be inlined. But there is nothing particularly "big" here. Link: https://lkml.kernel.org/r/20250303163014.1128035-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/rmap: abstract large mapcount operations for large folios (!hugetlb)David Hildenbrand
Let's abstract the operations so we can extend these operations easily. Link: https://lkml.kernel.org/r/20250303163014.1128035-10-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/rmap: pass dst_vma to folio_dup_file_rmap_pte() and friendsDavid Hildenbrand
We'll need access to the destination MM when modifying the large mapcount of a non-hugetlb large folios next. So pass in the destination VMA. Link: https://lkml.kernel.org/r/20250303163014.1128035-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: move _entire_mapcount in folio to page[2] on 32bitDavid Hildenbrand
Let's free up some space on 32bit in page[1] by moving the _pincount to page[2]. Ordinary folios only use the entire mapcount with PMD mappings, so order-1 folios don't apply. Similarly, hugetlb folios are always larger than order-1, turning the entire mapcount essentially unused for all order-1 folios. Moving it to order-1 folios will not change anything. On 32bit, simply check in folio_entire_mapcount() whether we have an order-1 folio, and return 0 in that case. Note that THPs on 32bit are not particularly common (and we don't care too much about performance), but we want to keep it working reliably, because likely we want to use large folios there as well in the future, independent of PMD leaf support. Once we dynamically allocate "struct folio", the 32bit specifics will go away again; even small folios could then have a pincount. Link: https://lkml.kernel.org/r/20250303163014.1128035-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: move _pincount in folio to page[2] on 32bitDavid Hildenbrand
Let's free up some space on 32bit in page[1] by moving the _pincount to page[2]. For order-1 folios (never anon folios!) on 32bit, we will now also use the GUP_PIN_COUNTING_BIAS approach. A fully-mapped order-1 folio requires 2 references. With GUP_PIN_COUNTING_BIAS being 1024, we'd detect such folios as "maybe pinned" with 512 full mappings, instead of 1024 for order-0. As anon folios are out of the picture (which are the most relevant users of checking for pinnings on *mapped* pages) and we are talking about 32bit, this is not expected to cause any trouble. In __dump_page(), copy one additional folio page if we detect a folio with an order > 1, so we can dump the pincount on order > 1 folios reliably. Note that THPs on 32bit are not particularly common (and we don't care too much about performance), but we want to keep it working reliably, because likely we want to use large folios there as well in the future, independent of PMD leaf support. Once we dynamically allocate "struct folio", fortunately the 32bit specifics will likely go away again; even small folios could then have a pincount and folio_has_pincount() would essentially always return "true". Link: https://lkml.kernel.org/r/20250303163014.1128035-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: move hugetlb specific things in folio to page[3]David Hildenbrand
Let's just move the hugetlb specific stuff to a separate page, and stop letting it overlay other fields for now. This frees up some space in page[2], which we will use on 32bit to free up some space in page[1]. While we could move these things to page[3] instead, it's cleaner to just move the hugetlb specific things out of the way and pack the core-folio stuff as tight as possible. ... and we can minimize the work required in dump_folio. We can now avoid re-initializing &folio->_deferred_list in hugetlb code. Hopefully dynamically allocating "strut folio" in the future will further clean this up. Link: https://lkml.kernel.org/r/20250303163014.1128035-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: let _folio_nr_pages overlay memcg_data in first tail pageDavid Hildenbrand
Let's free up some more of the "unconditionally available on 64BIT" space in order-1 folios by letting _folio_nr_pages overlay memcg_data in the first tail page (second folio page). Consequently, we have the optimization now whenever we have CONFIG_MEMCG, independent of 64BIT. We have to make sure that page->memcg on tail pages does not return "surprises". page_memcg_check() already properly refuses PageTail(). Let's do that earlier in print_page_owner_memcg() to avoid printing wrong "Slab cache page" information. No other code should touch that field on tail pages of compound pages. Reset the "_nr_pages" to 0 when splitting folios, or when freeing them back to the buddy (to avoid false page->memcg_data "bad page" reports). Note that in __split_huge_page(), folio_nr_pages() would stop working already as soon as we start messing with the subpages. Most kernel configs should have at least CONFIG_MEMCG enabled, even if disabled at runtime. 64byte "struct memmap" is what we usually have on 64BIT. While at it, rename "_folio_nr_pages" to "_nr_pages". Hopefully memdescs / dynamically allocating "strut folio" in the future will further clean this up, e.g., making _nr_pages available in all configs and maybe even in small folios. Doing that should be fairly easy on top of this change. [david@redhat.com: make "make htmldoc" happy] Link: https://lkml.kernel.org/r/a97f8a91-ec41-4796-81e3-7c9e0e491ba4@redhat.com Link: https://lkml.kernel.org/r/20250303163014.1128035-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: factor out large folio handling from folio_nr_pages() into ↵David Hildenbrand
folio_large_nr_pages() Let's factor it out into a simple helper function. This helper will also come in handy when working with code where we know that our folio is large. While at it, let's consistently return a "long" value from all these similar functions. Note that we cannot use "unsigned int" (even though _folio_nr_pages is of that type), because it would break some callers that do stuff like "-folio_nr_pages()". Both "int" or "unsigned long" would work as well. Maybe in the future we'll have the nr_pages readily available for all large folios, maybe even for small folios, or maybe for none. Link: https://lkml.kernel.org/r/20250303163014.1128035-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: factor out large folio handling from folio_order() into folio_large_order()David Hildenbrand
Patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT", v3. Let's add an "easy" way to decide -- without false positives, without page-mapcounts and without page table/rmap scanning -- whether a large folio is "certainly mapped exclusively" into a single MM, or whether it "maybe mapped shared" into multiple MMs. Use that information to implement Copy-on-Write reuse, to convert folio_likely_mapped_shared() to folio_maybe_mapped_share(), and to introduce a kernel config option that lets us not use+maintain per-page mapcounts in large folios anymore. The bigger picture was presented at LSF/MM [1]. This series is effectively a follow-up on my early work [2], which implemented a more precise, but also more complicated, way to identify whether a large folio is "mapped shared" into multiple MMs or "mapped exclusively" into a single MM. 1 Patch Organization ==================== Patch #1 -> #6: make more room in order-1 folios, so we have two "unsigned long" available for our purposes Patch #7 -> #11: preparations Patch #12: MM owner tracking for large folios Patch #13: COW reuse for PTE-mapped anon THP Patch #14: folio_maybe_mapped_shared() Patch #15 -> #20: introduce and implement CONFIG_NO_PAGE_MAPCOUNT 2 MM owner tracking =================== We assign each MM a unique ID ("MM ID"), to be able to squeeze more information in our folios. On 32bit we use 15-bit IDs, on 64bit we use 31-bit IDs. For each large folios, we now store two MM-ID+mapcount ("slot") combinations: * mm0_id + mm0_mapcount * mm1_id + mm1_mapcount On 32bit, we use a 16-bit per-MM mapcount, on 64bit an ordinary 32bit mapcount. This way, we require 2x "unsigned long" on 32bit and 64bit for both slots. Paired with the large mapcount, we can reliably identify whether one of these MMs is the current owner (-> owns all mappings) or even holds all folio references (-> owns all mappings, and all references are from mappings). As long as only two MMs map folio pages at a time, we can reliably and precisely identify whether a large folio is "mapped shared" or "mapped exclusively". Any additional MM that starts mapping the folio while there are no free slots becomes an "untracked MM". If one such "untracked MM" is the last one mapping a folio exclusively, we will not detect the folio as "mapped exclusively" but instead as "maybe mapped shared". (exception: only a single mapping remains) So that's where the approach gets imprecise. For now, we use a bit-spinlock to sync the large mapcount + slots, and make sure we do keep the machinery fast, to not degrade (un)map performance drastically: for example, we make sure to only use a single atomic (when grabbing the bit-spinlock), like we would already perform when updating the large mapcount. 3 CONFIG_NO_PAGE_MAPCOUNT ========================= patch #15 -> #20 spell out and document what exactly is affected when not maintaining the per-page mapcounts in large folios anymore. Most importantly, as we cannot maintain folio->_nr_pages_mapped anymore when (un)mapping pages, we'll account a complete folio as mapped if a single page is mapped. In addition, we'll not detect partially mapped anonymous folios as such in all cases yet. Likely less relevant changes include that we might now under-estimate the USS (Unique Set Size) of a process, but never over-estimate it. The goal is to make CONFIG_NO_PAGE_MAPCOUNT the default at some point, to then slowly make it the only option, as we learn about real-life impacts and possible ways to mitigate them. 4 Performance ============= Detailed performance numbers were included in v1 [3], and not that much changed between v1 and v2. I did plenty of measurements on different systems in the meantime, that all revealed slightly different results. The pte-mapped-folio micro-benchmarks [4] are fairly sensitive to code layout changes on some systems. Especially the fork() benchmark started being more-shaky-than-before on recent kernels for some reason. In summary, with my micro-benchmarks: * Small folios are not impacted. * CoW performance seems to be mostly unchanged across all folios sizes. * CoW reuse performance of large folios now matches CoW reuse performance of small folios, because we now actually implement the CoW reuse optimization. On an Intel Xeon Silver 4210R I measured a ~65% reduction in runtime, on an arm64 system I measured ~54% reduction. * munmap() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~30% on an Intel Xeon Silver 4210R and up to ~70% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * munmao() performance very slightly (couple percent) degrades without CONFIG_NO_PAGE_MAPCOUNT for smaller folios. For larger folios, there seems to be no change at all. * fork() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~20% on an Intel Xeon Silver 4210R and up to ~10% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * While fork() performance without CONFIG_NO_PAGE_MAPCOUNT seems to be almost unchanged on some systems, I saw some degradation for smaller folios on the AmpereOne A192-32X. I did not investigate the details yet, but I suspect code layout changes or suboptimal code placement / inlining. I'm not to worried about the fork() micro-benchmarks for smaller folios given how shaky the results are lately and by how much we improved fork() performance recently. I also ran case-anon-cow-rand and case-anon-cow-seq part of vm-scalability, to assess the scalability and the impact of the bit-spinlock. My measurements on a two 2-socket 10-core Intel Xeon Silver 4210R CPU revealed no significant changes. Similarly, running these benchmarks with 2 MiB THPs enabled on the AmpereOne A192-32X with 192 cores, I got < 1% difference with < 1% stdev, which is nice. So far, I did not get my hands on a similarly large system with multiple sockets. I found no other fitting scalability benchmarks that seem to really hammer on concurrent mapping/unmapping of large folio pages like case-anon-cow-seq does. 5 Concerns ========== 5.1 Bit spinlock ---------------- I'm not quite happy about the bit-spinlock, but so far it does not seem to affect scalability in my measurements. If it ever becomes a problem we could either investigate improving the locking, or simply stopping the MM tracking once there are "too many mappings" and simply assume that the folio is "mapped shared" until it was freed. This would be similar (but slightly different) to the "0,1,2,stopped" counting idea Willy had at some point. Adding that logic to "stop tracking" adds more code to the hot path, so I avoided that for now. 5.2 folio_maybe_mapped_shared() ------------------------------- I documented the change from folio_likely_mapped_shared() to folio_maybe_mapped_shared() quite extensively. If we run into surprises, I have some ideas on how to resolve them. For now, I think we should be fine. 5.3 Added code to map/unmap hot path ------------------------------------ So far, it looks like the added code on the rmap hot path does not really seem to matter much in the bigger picture. I'd like to further reduce it (and possibly improve fork() performance further), but I don't easily see how right now. Well, and I am out of puff 🙂 Having that said, alternatives I considered (e.g., per-MM per-folio mapcount) would add a lot more overhead to these hot paths. 6 Future Work ============= 6.1 Large mapcount ------------------ It would be very handy if the large mapcount would count how often folio pages are actually mapped into page tables: a PMD on x86-64 would count 512 times. Calculating the average per-page mapcount will be easy, and remapping (PMD->PTE) folios would get even faster. That would also remove the need for the entire mapcount (except for PMD-sized folios for memory statistics reasons ...), and allow for mapping folios larger than PMDs (e.g., 4 MiB) easily. We likely would also have to take the same number of folio references to make our folio_mapcount() == folio_ref_count() work, and we'd want to be able to avoid mapcount+refcount overflows: this could already become an issue with pte-mapped PUD-sized folios (fsdax). One approach we discussed in the THP cabal meeting is (1) extending the mapcount for large folios to 64bit (at least on 64bit systems) and (2) keeping the refcount at 32bit, but (3) having exactly one reference if the the mapcount != 0. It should be doable, but there are some corner cases to consider on the unmap path; it is something that I will be looking into next. 6.2 hugetlb ----------- I'd love to make use of the same tracking also for hugetlb. The real problem is PMD table sharing: getting a page mapped by MM X and unmapped by MM Y will not work. With mshare, that problem should not exist (all mapping/unmapping will be routed through the mshare MM). [1] https://lwn.net/Articles/974223/ [2] https://lore.kernel.org/linux-mm/a9922f58-8129-4f15-b160-e0ace581bcbe@redhat.com/T/ [3] https://lkml.kernel.org/r/20240829165627.2256514-1-david@redhat.com [4] https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/pte-mapped-folio-benchmarks.c This patch (of 20): Let's factor it out into a simple helper function. This helper will also come in handy when working with code where we know that our folio is large. Maybe in the future we'll have the order readily available for small and large folios; in that case, folio_large_order() would simply translate to folio_order(). Link: https://lkml.kernel.org/r/20250303163014.1128035-1-david@redhat.com Link: https://lkml.kernel.org/r/20250303163014.1128035-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lance Yang <ioworker0@gmail.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: properly refcount fs dax pagesAlistair Popple
Currently fs dax pages are considered free when the refcount drops to one and their refcounts are not increased when mapped via PTEs or decreased when unmapped. This requires special logic in mm paths to detect that these pages should not be properly refcounted, and to detect when the refcount drops to one instead of zero. On the other hand get_user_pages(), etc. will properly refcount fs dax pages by taking a reference and dropping it when the page is unpinned. Tracking this special behaviour requires extra PTE bits (eg. pte_devmap) and introduces rules that are potentially confusing and specific to FS DAX pages. To fix this, and to possibly allow removal of the special PTE bits in future, convert the fs dax page refcounts to be zero based and instead take a reference on the page each time it is mapped as is currently the case for normal pages. This may also allow a future clean-up to remove the pgmap refcounting that is currently done in mm/gup.c. Link: https://lkml.kernel.org/r/c7d886ad7468a20452ef6e0ddab6cfe220874e7c.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/gup: don't allow FOLL_LONGTERM pinning of FS DAX pagesAlistair Popple
Longterm pinning of FS DAX pages should already be disallowed by various pXX_devmap checks. However a future change will cause these checks to be invalid for FS DAX pages so make folio_is_longterm_pinnable() return false for FS DAX pages. Link: https://lkml.kernel.org/r/250a31876704b79f7c65b159f3c835e547f052df.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/huge_memory: add vmf_insert_folio_pmd()Alistair Popple
Currently DAX folio/page reference counts are managed differently to normal pages. To allow these to be managed the same as normal pages introduce vmf_insert_folio_pmd. This will map the entire PMD-sized folio and take references as it would for a normally mapped page. This is distinct from the current mechanism, vmf_insert_pfn_pmd, which simply inserts a special devmap PMD entry into the page table without holding a reference to the page for the mapping. It is not currently useful to implement a more generic vmf_insert_folio() which selects the correct behaviour based on folio_order(). This is because PTE faults require only a subpage of the folio to be PTE mapped rather than the entire folio. It would be possible to add this context somewhere but callers already need to handle PTE faults and PMD faults separately so a more generic function is not useful. Link: https://lkml.kernel.org/r/7bf92a2e68225d13ea368d53bbfee327314d1c40.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Wiliams <dan.j.williams@intel.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/huge_memory: add vmf_insert_folio_pud()Alistair Popple
Currently DAX folio/page reference counts are managed differently to normal pages. To allow these to be managed the same as normal pages introduce vmf_insert_folio_pud. This will map the entire PUD-sized folio and take references as it would for a normally mapped page. This is distinct from the current mechanism, vmf_insert_pfn_pud, which simply inserts a special devmap PUD entry into the page table without holding a reference to the page for the mapping. Link: https://lkml.kernel.org/r/649a1ef91d556593948351e94f51ef73a14f6794.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/rmap: add support for PUD sized mappings to rmapAlistair Popple
The rmap doesn't currently support adding a PUD mapping of a folio. This patch adds support for entire PUD mappings of folios, primarily to allow for more standard refcounting of device DAX folios. Currently DAX is the only user of this and it doesn't require support for partially mapped PUD-sized folios so we don't support for that for now. Link: https://lkml.kernel.org/r/248582c07896e30627d1aeaeebc6949cfd91b851.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm/memory: add vmf_insert_page_mkwrite()Alistair Popple
Currently to map a DAX page the DAX driver calls vmf_insert_pfn. This creates a special devmap PTE entry for the pfn but does not take a reference on the underlying struct page for the mapping. This is because DAX page refcounts are treated specially, as indicated by the presence of a devmap entry. To allow DAX page refcounts to be managed the same as normal page refcounts introduce vmf_insert_page_mkwrite(). This will take a reference on the underlying page much the same as vmf_insert_page, except it also permits upgrading an existing mapping to be writable if requested/possible. Link: https://lkml.kernel.org/r/4ce3aa984c060f370105e0bfef1035869578be47.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Wiliams <dan.j.williams@intel.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17mm: allow compound zone device pagesAlistair Popple
Zone device pages are used to represent various type of device memory managed by device drivers. Currently compound zone device pages are not supported. This is because MEMORY_DEVICE_FS_DAX pages are the only user of higher order zone device pages and have their own page reference counting. A future change will unify FS DAX reference counting with normal page reference counting rules and remove the special FS DAX reference counting. Supporting that requires compound zone device pages. Supporting compound zone device pages requires compound_head() to distinguish between head and tail pages whilst still preserving the special struct page fields that are specific to zone device pages. A tail page is distinguished by having bit zero being set in page->compound_head, with the remaining bits pointing to the head page. For zone device pages page->compound_head is shared with page->pgmap. The page->pgmap field must be common to all pages within a folio, even if the folio spans memory sections. Therefore pgmap is the same for both head and tail pages and can be moved into the folio and we can use the standard scheme to find compound_head from a tail page. Link: https://lkml.kernel.org/r/67055d772e6102accf85161d0b57b0b3944292bf.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Balbir Singh <balbirs@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: remove PAGE_MAPPING_DAX_SHARED mapping flagAlistair Popple
The page ->mapping pointer can have magic values like PAGE_MAPPING_DAX_SHARED and PAGE_MAPPING_ANON for page owner specific usage. Currently PAGE_MAPPING_DAX_SHARED and PAGE_MAPPING_ANON alias to the same value. This isn't a problem because FS DAX pages are never seen by the anonymous mapping code and vice versa. However a future change will make FS DAX pages more like normal pages, so folio_test_anon() must not return true for a FS DAX page. We could explicitly test for a FS DAX page in folio_test_anon(), etc. however the PAGE_MAPPING_DAX_SHARED flag isn't actually needed. Instead we can use the page->mapping field to implicitly track the first mapping of a page. If page->mapping is non-NULL it implies the page is associated with a single mapping at page->index. If the page is associated with a second mapping clear page->mapping and set page->share to 1. This is possible because a shared mapping implies the file-system implements dax_holder_operations which makes the ->mapping and ->index, which is a union with ->share, unused. The page is considered shared when page->mapping == NULL and page->share > 0 or page->mapping != NULL, implying it is present in at least one address space. This also makes it easier for a future change to detect when a page is first mapped into an address space which requires special handling. Link: https://lkml.kernel.org/r/c22f699202db0acee2f7039eb026e68261ce42d6.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Wiliams <dan.j.williams@intel.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: ensure all pages are idle prior to filesystem unmountAlistair Popple
File systems call dax_break_mapping() prior to reallocating file system blocks to ensure the page is not undergoing any DMA or other accesses. Generally this is needed when a file is truncated to ensure that if a block is reallocated nothing is writing to it. However filesystems currently don't call this when an FS DAX inode is evicted. This can cause problems when the file system is unmounted as a page can continue to be under going DMA or other remote access after unmount. This means if the file system is remounted any truncate or other operation which requires the underlying file system block to be freed will not wait for the remote access to complete. Therefore a busy block may be reallocated to a new file leading to corruption. Link: https://lkml.kernel.org/r/2d3cf575bbd095084993154be2f0aa7442e5cd28.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Wiliams <dan.j.williams@intel.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: always remove DAX page-cache entries when breaking layoutsAlistair Popple
Prior to any truncation operations file systems call dax_break_mapping() to ensure pages in the range are not under going DMA. Later DAX page-cache entries will be removed by truncate_folio_batch_exceptionals() in the generic page-cache code. However this makes it possible for folios to be removed from the page-cache even though they are still DMA busy if the file-system hasn't called dax_break_mapping(). It also means they can never be waited on in future because FS DAX will lose track of them once the page-cache entry has been deleted. Instead it is better to delete the FS DAX entry when the file-system calls dax_break_mapping() as part of it's truncate operation. This ensures only idle pages can be removed from the FS DAX page-cache and makes it easy to detect if a file-system hasn't called dax_break_mapping() prior to a truncate operation. Link: https://lkml.kernel.org/r/3be6115eaaa8d28fee37fcba3287be4f226a7d24.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: create a common implementation to break DAX layoutsAlistair Popple
Prior to freeing a block file systems supporting FS DAX must check that the associated pages are both unmapped from user-space and not undergoing DMA or other access from eg. get_user_pages(). This is achieved by unmapping the file range and scanning the FS DAX page-cache to see if any pages within the mapping have an elevated refcount. This is done using two functions - dax_layout_busy_page_range() which returns a page to wait for the refcount to become idle on. Rather than open-code this introduce a common implementation to both unmap and wait for the page to become idle. Link: https://lkml.kernel.org/r/c4d381e41fc618296cee2820403c166d80599d5c.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-17fs/dax: refactor wait for dax idle pageAlistair Popple
A FS DAX page is considered idle when its refcount drops to one. This is currently open-coded in all file systems supporting FS DAX. Move the idle detection to a common function to make future changes easier. Link: https://lkml.kernel.org/r/c2c9d269110b90224eeb1dc661ffbc1d82aa20c9.1740713401.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-18jbd2: remove jbd2_journal_unfile_buffer()Baokun Li
Since the function jbd2_journal_unfile_buffer() is no longer called anywhere after commit e5a120aeb57f ("jbd2: remove journal_head from descriptor buffers"), so let's remove it. Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250306063240.157884-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2025-03-17NFS: Implement NFSv4.2's OFFLOAD_STATUS operationChuck Lever
Enable the Linux NFS client to observe the progress of an offloaded asynchronous COPY operation. This new operation will be put to use in a subsequent patch. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Link: https://lore.kernel.org/r/20250113153235.48706-14-cel@kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>