| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flit mode introduced in PCIe r6.0 alters how the TLP Header Log is
presented through AER and DPC Capability registers. The TLP Prefix Log
Register is not present with Flit mode, and the register becomes an
extension of the TLP Header Log (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13).
Adapt pcie_read_tlp_log() and struct pcie_tlp_log to read and store the
extended TLP Header Log when the Link is in Flit mode. As the Prefix Log
and Extended TLP Header are not present at the same time, a C union can be
used.
Determining whether the error occurred while the Link was in Flit mode is a
bit complicated. In case of AER, the Advanced Error Capabilities and
Control Register directly tells whether the error was logged in Flit mode
or not (PCIe r6.1 sec 7.8.4.7). The DPC Capability (PCIe r6.1 sec 7.9.14),
unfortunately, does not contain the same information.
Unlike AER, the DPC Capability does not provide a way to discern whether
the error was logged in Flit mode (this is confirmed by PCI WG to be an
oversight in the spec). DPC will bring the Link down immediately following
an error, which makes it impossible to acquire the Flit Mode Status
directly from the Link Status 2 register because Flit Mode Status is only
set in certain Link states (PCIe r6.1 sec 7.5.3.20). As a workaround, use
the flit_mode value stored into the struct pci_bus.
Link: https://lore.kernel.org/r/20250207161836.2755-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCIe r6.0 added Flit mode, which mainly alters HW behavior, but there are
some OS visible changes. The OS visible changes include differences in the
layout of some capabilities and interpretation of the TLP headers (in
diagnostics situations).
To be able to determine which mode the PCIe Link is using, store the Flit
Mode Status (PCIe r6.1 sec 7.5.3.20) information in addition to the Link
speed into struct pci_bus in pcie_update_link_speed().
Link: https://lore.kernel.org/r/20250207161836.2755-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: use unsigned int:1 instead of bool, update flit_mode setting]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
|
|
Panic callback handlers allows coresight device drivers to sync
relevant trace data and trace metadata to reserved memory
regions so that they can be retrieved later in the subsequent
boot or in the crashdump kernel.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250212114918.548431-4-lcherian@marvell.com
|
|
A "fault_data" was added exclusively for the iommufd_fault_iopf_handler()
used by IOPF/PRI use cases, along with the attach_handle. Now, the iommufd
version of the sw_msi function will reuse the attach_handle and fault_data
for a non-fault case.
Rename "fault_data" to "iommufd_hwpt" so as not to confine it to a "fault"
case. Move it into a union to be the iommufd private pointer. A following
patch will move the iova_cookie to the union for dma-iommu too after the
iommufd_sw_msi implementation is added.
Since we have two unions now, add some simple comments for readability.
Link: https://patch.msgid.link/r/ee5039503f28a16590916e9eef28b917e2d1607a.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
SW_MSI supports IOMMU to translate an MSI message before the MSI message
is delivered to the interrupt controller. On such systems, an iommu_domain
must have a translation for the MSI message for interrupts to work.
The IRQ subsystem will call into IOMMU to request that a physical page be
set up to receive MSI messages, and the IOMMU then sets an IOVA that maps
to that physical page. Ultimately the IOVA is programmed into the device
via the msi_msg.
Generalize this by allowing iommu_domain owners to provide implementations
of this mapping. Add a function pointer in struct iommu_domain to allow a
domain owner to provide its own implementation.
Have dma-iommu supply its implementation for IOMMU_DOMAIN_DMA types during
the iommu_get_dma_cookie() path. For IOMMU_DOMAIN_UNMANAGED types used by
VFIO (and iommufd for now), have the same iommu_dma_sw_msi set as well in
the iommu_get_msi_cookie() path.
Hold the group mutex while in iommu_dma_prepare_msi() to ensure the domain
doesn't change or become freed while running. Races with IRQ operations
from VFIO and domain changes from iommufd are possible here.
Replace the msi_prepare_lock with a lockdep assertion for the group mutex
as documentation. For the dmau_iommu.c each iommu_domain is unique to a
group.
Link: https://patch.msgid.link/r/4ca696150d2baee03af27c4ddefdb7b0b0280e7b.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The two-step process to translate the MSI address involves two functions,
iommu_dma_prepare_msi() and iommu_dma_compose_msi_msg().
Previously iommu_dma_compose_msi_msg() needed to be in the iommu layer as
it had to dereference the opaque cookie pointer. Now, the previous patch
changed the cookie pointer into an integer so there is no longer any need
for the iommu layer to be involved.
Further, the call sites of iommu_dma_compose_msi_msg() all follow the same
pattern of setting an MSI message address_hi/lo to non-translated and then
immediately calling iommu_dma_compose_msi_msg().
Refactor iommu_dma_compose_msi_msg() into msi_msg_set_addr() that directly
accepts the u64 version of the address and simplifies all the callers.
Move the new helper to linux/msi.h since it has nothing to do with iommu.
Aside from refactoring, this logically prepares for the next patch, which
allows multiple implementation options for iommu_dma_prepare_msi(). So, it
does not make sense to have the iommu_dma_compose_msi_msg() in dma-iommu.c
as it no longer provides the only iommu_dma_prepare_msi() implementation.
Link: https://patch.msgid.link/r/eda62a9bafa825e9cdabd7ddc61ad5a21c32af24.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IOMMU translation for MSI message addresses has been a 2-step process,
separated in time:
1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address
is stored in the MSI descriptor when an MSI interrupt is allocated.
2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a
translated message address.
This has an inherent lifetime problem for the pointer stored in the cookie
that must remain valid between the two steps. However, there is no locking
at the irq layer that helps protect the lifetime. Today, this works under
the assumption that the iommu domain is not changed while MSI interrupts
being programmed. This is true for normal DMA API users within the kernel,
as the iommu domain is attached before the driver is probed and cannot be
changed while a driver is attached.
Classic VFIO type1 also prevented changing the iommu domain while VFIO was
running as it does not support changing the "container" after starting up.
However, iommufd has improved this so that the iommu domain can be changed
during VFIO operation. This potentially allows userspace to directly race
VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and
VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()).
This potentially causes both the cookie pointer and the unlocked call to
iommu_get_domain_for_dev() on the MSI translation path to become UAFs.
Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA
address is already known during iommu_dma_prepare_msi() and cannot change.
Thus, it can simply be stored as an integer in the MSI descriptor.
The other UAF related to iommu_get_domain_for_dev() will be addressed in
patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by
using the IOMMU group mutex.
Link: https://patch.msgid.link/r/a4f2cd76b9dc1833ee6c1cf325cba57def22231c.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move ctl tables to two files:
- perf_event_{paranoid,mlock_kb,max_sample_rate} and
perf_cpu_time_max_percent into kernel/events/core.c
- perf_event_max_{stack,context_per_stack} into
kernel/events/callchain.c
Make static variables and functions that are fully contained in core.c
and callchain.cand remove them from include/linux/perf_event.h.
Additionally six_hundred_forty_kb is moved to callchain.c.
Two new sysctl tables are added ({callchain,events_core}_sysctl_table)
with their respective sysctl registration functions.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-5-cd3698ab8d29@kernel.org
|
|
new patches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
iocb->ki_pos has been updated with the number of written bytes since
generic_perform_write().
Besides __filemap_fdatawrite_range() accepts the inclusive end of the
data range.
Fixes: 1d4457576570 ("mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250218120209.88093-2-jefflexu@linux.alibaba.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some PPS generator drivers may need to retrieve a pointer to their
internal data while executing the PPS generator enable() method.
During the driver registration the pps_gen_device pointer is returned
from the framework, and for that reason, there is difficulty in
getting generator driver data back in the enable function. We won't be
able to use container_of macro as it results in static assert, and we
might end up in using static pointer.
To solve the issue and to get back the generator driver data back, we
should not copy the struct pps_gen_source_info within the struct
pps_gen_device during the registration stage, but simply save the
pointer of the driver one. In this manner, driver may get a pointer
to their internal data as shown below:
struct pps_gen_foo_data_s {
...
struct pps_gen_source_info gen_info;
struct pps_gen_device *pps_gen;
...
};
static int __init pps_gen_foo_init(void)
{
struct pps_gen_foo_data_s *foo;
...
foo->pps_gen = pps_gen_register_source(&foo->gen_info);
...
}
Then, in the enable() method, we can retrieve the pointer to the main
struct by using the code below:
static int pps_gen_foo_enable(struct pps_gen_device *pps_gen, bool enable)
{
struct pps_gen_foo_data_s *foo = container_of(pps_gen->info,
struct pps_gen_foo_data_s, gen_info);
...
}
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Tested-by: Subramanian Mohan <subramanian.mohan@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Subramanian Mohan <subramanian.mohan@intel.com>
Link: https://lore.kernel.org/r/20250219040618.70962-2-subramanian.mohan@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the 'eUSB2 Isochronous Endpoint Companion Descriptor'
introduced in the recent USB 2.0 specification 'USB 2.0 Double Isochronous
IN Bandwidth' ECN.
It allows embedded USB2 (eUSB2) devices to report and use higher bandwidths
for isochronous IN transfers in order to support higher camera resolutions
on the lid of laptops and tablets with minimal change to the USB2 protocol.
The motivation for expanding USB 2.0 is further clarified in an additional
Embedded USB2 version 2.0 (eUSB2v2) supplement to the USB 2.0
specification. It points out this is optimized for performance, power and
cost by using the USB 2.0 low-voltage, power efficient PHY and half-duplex
link for the asymmetric camera bandwidth needs, avoiding the costly and
complex full-duplex USB 3.x symmetric link and gigabit receivers.
eUSB2 devices that support the higher isochronous IN bandwidth and the new
descriptor can be identified by their device descriptor bcdUSB value of
0x0220
Co-developed-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250220141339.1939448-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 2002 (change "Replace BKL for chain locking with sysvfs-private
rwlock") the sysv filesystem was doing IO under a rwlock in its
get_block() function (yes, a non-sleepable lock hold over a function
used to read inode metadata for all reads and writes). Nobody noticed
until syzbot in 2023 [1]. This shows nobody is using the filesystem.
Just drop it.
[1] https://lore.kernel.org/all/0000000000000ccf9a05ee84f5b0@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250220163940.10155-2-jack@suse.cz
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The former is a no-op wrapper with the same argument.
I left it in place to not lose the information who needs it -- one day
"pseudo" inodes may start differing from what alloc_inode() returns.
In the meantime no point taking a detour.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250212180459.1022983-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It is merely a trivial wrapper around getname_flags which adds a zeroed
argument, no point paying for an extra call.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250206000105.432528-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of several functions from long to int to match its actu
al behavior. These functions only return int values. This change improves
type consistency across the filesystem code and aligns the function signatu
re with its existing implementation and usage.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com>
Link: https://lore.kernel.org/r/20250121070844.4413-3-yuichtsu@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of several functions from long to int to match its actu
al behavior. These functions only return int values. This change improves
type consistency across the filesystem code and aligns the function signatu
re with its existing implementation and usage.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com>
Link: https://lore.kernel.org/r/20250121070844.4413-2-yuichtsu@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Dumping processes with large allocated and mostly not-faulted areas is
very slow.
Borrowing a test case from Tavian Barnes:
int main(void) {
char *mem = mmap(NULL, 1ULL << 40, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_NORESERVE | MAP_PRIVATE, -1, 0);
printf("%p %m\n", mem);
if (mem != MAP_FAILED) {
mem[0] = 1;
}
abort();
}
That's 1TB of almost completely not-populated area.
On my test box it takes 13-14 seconds to dump.
The profile shows:
- 99.89% 0.00% a.out
entry_SYSCALL_64_after_hwframe
do_syscall_64
syscall_exit_to_user_mode
arch_do_signal_or_restart
- get_signal
- 99.89% do_coredump
- 99.88% elf_core_dump
- dump_user_range
- 98.12% get_dump_page
- 64.19% __get_user_pages
- 40.92% gup_vma_lookup
- find_vma
- mt_find
4.21% __rcu_read_lock
1.33% __rcu_read_unlock
- 3.14% check_vma_flags
0.68% vma_is_secretmem
0.61% __cond_resched
0.60% vma_pgtable_walk_end
0.59% vma_pgtable_walk_begin
0.58% no_page_table
- 15.13% down_read_killable
0.69% __cond_resched
13.84% up_read
0.58% __cond_resched
Almost 29% of the time is spent relocking the mmap semaphore between
calls to get_dump_page() which find nothing.
Whacking that results in times of 10 seconds (down from 13-14).
While here make the thing killable.
The real problem is the page-sized iteration and the real fix would
patch it up instead. It is left as an exercise for the mm-familiar
reader.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250119103205.2172432-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250209185523.745956-4-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Small collection of macros taken from mmdebug.h
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250209185523.745956-2-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users of the time releated parts of the vDSO are now using the generic
storage implementation. Remove the therefore unnecessary compatibility
accessor functions and symbols.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-18-13a4669dfc8c@linutronix.de
|
|
Historically each architecture defined their own way to store the vDSO
data page. Add a generic mechanism to provide storage for that page.
Furthermore this generic storage will be extended to also provide
uniform storage for *non*-time-related data, like the random state or
architecture-specific data. These will have their own pages and data
structures, so rename 'vdso_data' into 'vdso_time_data' to make that
split clear from the name.
Also introduce a new consistent naming scheme for the symbols related to
the vDSO, which makes it clear if the symbol is accessible from
userspace or kernel space and the type of data behind the symbol.
The generic fault handler contains an optimization to prefault the vvar
page when the timens page is accessed. This was lifted from s390 and x86.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-5-13a4669dfc8c@linutronix.de
|
|
The vDSO implementation can only include headers from the vdso/
namespace. To enable the usage of the ALIGN() macro from the vDSO, move
linux/align.h to vdso/align.h wholly.
As the only dependency linux/const.h is only a wrapper around
vdso/const.h anyways adapt that dependency.
Also provide a compatibility wrapper linux/align.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-3-13a4669dfc8c@linutronix.de
|
|
GPIOLIB supports the case when number of supported GPIOs can be read
from the device property. Enable this for drivers that are using
GPIO regmap layer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Group ngpio_per_reg, reg_stride, and reg_mask_xlate assignments together
with the respective conditional for better understanding what's going on
in the code.
While at it, mark ngpio_per_reg as (Optional) in the kernel-doc
in accordance with what code actually does.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
After 12d5151be010 ("net: phy: remove leftovers from switch to linkmode
bitmaps") the following declarations are unused and can be removed too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b2883c75-4108-48f2-ab73-e81647262bc2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge bpf fixes after downstream PR (bpf-6.14-rc4).
Minor conflict:
kernel/bpf/btf.c
Adjacent changes:
kernel/bpf/arena.c
kernel/bpf/btf.c
kernel/bpf/syscall.c
kernel/bpf/verifier.c
mm/memory.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Immutable branch between MFD and Power due for the v6.15 merge window
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
|
|
Support hw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This
callback will occur at the same timestamping point as the user
space's hardware SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP
with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers
from driver side using SKBTX_HW_TSTAMP. The new definition of
SKBTX_HW_TSTAMP means the combination tests of socket timestamping
and bpf timestamping. After this patch, drivers can work under the
bpf timestamping.
Considering some drivers don't assign the skb with hardware
timestamp, this patch does the assignment and then BPF program
can acquire the hwstamp from skb directly.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com
|
|
Support sw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_SW_CB. This
callback will occur at the same timestamping point as the user
space's software SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
Based on this patch, BPF program will get the software
timestamp when the driver is ready to send the skb. In the
sebsequent patch, the hardware timestamp will be supported.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-8-kerneljasonxing@gmail.com
|
|
Support SCM_TSTAMP_SCHED case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SCHED_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_SCHED. The BPF program can use it to get the
same SCM_TSTAMP_SCHED timestamp without modifying the user-space
application.
A new SKBTX_BPF flag is added to mark skb_shinfo(skb)->tx_flags,
ensuring that the new BPF timestamping and the current user
space's SO_TIMESTAMPING do not interfere with each other.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-7-kerneljasonxing@gmail.com
|
|
The subsequent patch will implement BPF TX timestamping. It will
call the sockops BPF program without holding the sock lock.
This breaks the current assumption that all sock ops programs will
hold the sock lock. The sock's fields of the uapi's bpf_sock_ops
requires this assumption.
To address this, a new "u8 is_locked_tcp_sock;" field is added. This
patch sets it in the current sock_ops callbacks. The "is_fullsock"
test is then replaced by the "is_locked_tcp_sock" test during
sock_ops_convert_ctx_access().
The new TX timestamping callbacks added in the subsequent patch will
not have this set. This will prevent unsafe access from the new
timestamping callbacks.
Potentially, we could allow read-only access. However, this would
require identifying which callback is read-safe-only and also requires
additional BPF instruction rewrites in the covert_ctx. Since the BPF
program can always read everything from a socket (e.g., by using
bpf_core_cast), this patch keeps it simple and disables all read
and write access to any socket fields through the bpf_sock_ops
UAPI from the new TX timestamping callback.
Moreover, note that some of the fields in bpf_sock_ops are specific
to tcp_sock, and sock_ops currently only supports tcp_sock. In
the future, UDP timestamping will be added, which will also break
this assumption. The same idea used in this patch will be reused.
Considering that the current sock_ops only supports tcp_sock, the
variable is named is_locked_"tcp"_sock.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-4-kerneljasonxing@gmail.com
|
|
The change is necessary to enable the use of the
`i2c_get_dma_safe_msg_buf()` API, which requires a non-const
`struct i2c_msg *` to operate. The `i2c_get_dma_safe_msg_buf()` function
ensures safe handling of I2C messages when using DMA, making it essential
for scenarios where DMA transfers are involved. By removing the `const`
qualifier, this patch allows drivers to prepare and manage DMA-safe
buffers directly.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250204091702.4014466-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
|
|
This adds basic support for LEDs for the max77705 PMIC.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-7-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the core MFD driver for max77705 PMIC. Drivers for sub-devices
will be added in subsequent patches.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-5-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add driver for Maxim 77705 switch-mode charger.
It providing power supply class information to userspace.
The driver is configured through DTS (battery and system related
settings).
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-3-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs into for-6.15/io_uring-epoll-wait
Merge epoll changes from the VFS tree, which the io_uring changes depend
on.
* 'vfs-6.15.eventpoll' of https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
|
|
* for-6.15/io_uring-rx-zc: (77 commits)
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
net: page_pool: add a mp hook to unregister_netdevice*
net: page_pool: add callback for mp info printing
netdev: add io_uring memory provider info
...
|
|
* for-6.15/io_uring: (30 commits)
io_uring: use lockless_cq flag in io_req_complete_post()
io_uring: pass struct io_tw_state by value
io_uring: introduce type alias for io_tw_state
io_uring/rsrc: avoid NULL check in io_put_rsrc_node()
io_uring: pass ctx instead of req to io_init_req_drain()
io_uring: use IO_REQ_LINK_FLAGS more
io_uring/net: improve recv bundles
io_uring/waitid: use generic io_cancel_remove() helper
io_uring/futex: use generic io_cancel_remove() helper
io_uring/cancel: add generic cancel helper
io_uring/waitid: convert to io_cancel_remove_all()
io_uring/futex: convert to io_cancel_remove_all()
io_uring/cancel: add generic remove_all helper
io_uring/kbuf: uninline __io_put_kbufs
io_uring/kbuf: introduce io_kbuf_drop_legacy()
io_uring/kbuf: open code __io_put_kbuf()
io_uring/kbuf: remove legacy kbuf caching
io_uring/kbuf: simplify __io_put_kbuf
io_uring/kbuf: move locking into io_kbuf_drop()
io_uring/kbuf: remove legacy kbuf kmem cache
...
|
|
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The following functions have been in the mei code for
a long time but have never been used.
mei_txe_setup_satt2() was added in 2014 by
commit 32e2b59fca2c ("mei: txe: add hw-txe.c")
mei_me_cl_rm_by_uuid_id() was added in 2015 by
commit 79563db9ddd3 ("mei: add reference counting for me clients")
mei_cldev_uuid() was added in 2015 by
commit baeacd037697 ("mei: bus: export uuid and protocol version to mei_cl
bus drivers")
mei_cldev_recv_nonblock() was added in 2016 by
commit 076802d00615 ("mei: bus: enable non-blocking RX")
it is the only user of mei_cldev_recv_nonblock_vtag().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250130012654.255119-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Interrupt controller drivers which enable CONFIG_GENERIC_PENDING_IRQ
require to know whether an interrupt can be moved in process context or not
to decide whether they need to invoke the work around for non-atomic MSI
updates or not.
This information can be retrieved via irq_can_move_pcntxt(). That helper
requires access to the top-most interrupt domain data, but the driver which
requires this is usually further down in the hierarchy.
Introduce irq_can_move_in_process_context() which retrieves that
information from the top-most interrupt domain data.
[ tglx: Massaged change log ]
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-6-apatel@ventanamicro.com
|
