| Age | Commit message (Collapse) | Author |
|---|
|
For P2P delay measurement, the ingress time stamp of the PDelay_Req is
required for the correction field of the PDelay_Resp. The application
echoes back the correction field of the PDelay_Req when sending the
PDelay_Resp.
Some hardware (like the ZHAW InES PTP time stamping IP core) subtracts
the ingress timestamp autonomously from the correction field, so that
the hardware only needs to add the egress timestamp on tx. Other
hardware (like the Microchip KSZ9563) reports the ingress time stamp via
an interrupt and requires that the software provides this time stamp via
tail-tag on tx.
In order to avoid introducing a further application interface for this,
the driver can simply emulate the behavior of the InES device and
subtract the ingress time stamp in software from the correction field.
On egress, the correction field can either be kept as it is (and the
time stamp field in the tail-tag is set to zero) or move the value from
the correction field back to the tail-tag.
Changing the correction field requires updating the UDP checksum (if UDP
is used as transport).
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the
transmit frame needs additional 4 bytes before the tail tag. It is
needed for all the transmission packets irrespective of PTP packets or
not.
The 4-byte timestamp field is 0 for frames other than Pdelay_Resp. For
the one-step Pdelay_Resp, the switch needs the receive timestamp of the
Pdelay_Req message so that it can put the turnaround time in the
correction field.
Since PTP has to be enabled for both Transmission and reception
timestamping, driver needs to track of the tx and rx setting of the all
the user ports in the switch.
Two flags hw_tx_en and hw_rx_en are added in ksz_port to track the
timestampping setting of each port. When any one of ports has tx or rx
timestampping enabled, bit 6 of PTP_MSG_CONF1 is set and it is indicated
to tag_ksz.c through tagger bytes. This flag adds 4 additional bytes to
the tail tag. When tx and rx timestamping of all the ports are disabled,
then 4 bytes are not added.
Tested using hwstamp -i <interface>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no more users of the obsolete interface
u64_stats_fetch_begin_irq() and u64_stats_fetch_retry_irq().
Remove the obsolete API.
[bigeasy: Split out the bits from a larger patch].
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20230110160738.974085-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/usb/r8152.c
be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit")
ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lockdep reports a bogus possible deadlock on MT8192 Chromebooks due to
the following lock sequences:
1. lock(i2c_register_adapter) [1]; lock(&ec_dev->lock)
2. lock(&ec_dev->lock); lock(prepare_lock);
The actual dependency chains are much longer. The shortened version
looks somewhat like:
1. cros-ec-rpmsg on mtk-scp
ec_dev->lock -> prepare_lock
2. In rt5682_i2c_probe() on native I2C bus:
prepare_lock -> regmap->lock -> (possibly) i2c_adapter->bus_lock
3. In rt5682_i2c_probe() on native I2C bus:
regmap->lock -> i2c_adapter->bus_lock
4. In sbs_probe() on i2c-cros-ec-tunnel I2C bus attached on cros-ec:
i2c_adapter->bus_lock -> ec_dev->lock
While lockdep is correct that the shared lockdep classes have a circular
dependency, it is bogus because
a) 2+3 happen on a native I2C bus
b) 4 happens on the actual EC on ChromeOS devices
c) 1 happens on the SCP coprocessor on MediaTek Chromebooks that just
happens to expose a cros-ec interface, but does not have an
i2c-cros-ec-tunnel I2C bus
In short, the "dependencies" are actually on different devices.
Setup a per-device lockdep key for cros_ec devices so lockdep can tell
the two instances apart. This helps with getting rid of the bogus
lockdep warning. For ChromeOS devices that only have one cros-ec
instance this doesn't change anything.
Also add a missing mutex_destroy, just to make the teardown complete.
[1] This is likely the per I2C bus lock with shared lockdep class
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20230111074146.2624496-1-wenst@chromium.org
|
|
Fix the following kernel-doc warnings:
$ ./scripts/kernel-doc -none \
include/linux/platform_data/cros_ec_commands.h
include/linux/platform_data/cros_ec_commands.h:1092: warning: expecting
prototype for struct ec_response_get_cmd_version. Prototype was for
struct ec_response_get_cmd_versions instead
include/linux/platform_data/cros_ec_commands.h:5485: warning: This
comment starts with '/**', but isn't a kernel-doc comment.
include/linux/platform_data/cros_ec_commands.h:5496: warning: This
comment starts with '/**', but isn't a kernel-doc comment.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230111055728.708990-5-tzungbi@kernel.org
|
|
Fix the following kernel-doc warning:
$ ./scripts/kernel-doc -none include/linux/platform_data/cros_ec_proto.h
include/linux/platform_data/cros_ec_proto.h:187: warning: Function
parameter or member 'last_resume_result' not described in 'cros_ec_device'
Cc: Evan Green <evgreen@chromium.org>
Fixes: 8c3166e17cf1 ("mfd / platform: cros_ec_debugfs: Expose resume result via debugfs")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230111055728.708990-4-tzungbi@kernel.org
|
|
Fix the following kernel-doc warning:
$ ./scripts/kernel-doc -none include/linux/platform_data/cros_ec_proto.h
include/linux/platform_data/cros_ec_proto.h:187: warning: Function
parameter or member 'suspend_timeout_ms' not described in 'cros_ec_device'
Cc: Evan Green <evgreen@chromium.org>
Fixes: e8bf17d58a4d ("platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230111055728.708990-3-tzungbi@kernel.org
|
|
Fix the following kernel-doc warnings:
$ ./scripts/kernel-doc -none drivers/platform/chrome/*
drivers/platform/chrome/cros_ec_debugfs.c:54: warning: Function
parameter or member 'notifier_panic' not described in 'cros_ec_debugfs'
$ ./scripts/kernel-doc -none include/linux/platform_data/cros_ec_proto.h
include/linux/platform_data/cros_ec_proto.h:187: warning: Function
parameter or member 'panic_notifier' not described in 'cros_ec_device'
Cc: Rob Barnes <robbarnes@google.com>
Fixes: d90fa2c64d59 ("platform/chrome: cros_ec: Poll EC log on EC panic")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groweck@chromium.org>
Link: https://lore.kernel.org/r/20230111055728.708990-2-tzungbi@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
|
Add IPC PX-39A support.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-3-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
What we called IPC427G should be renamed to BX-39A to be more in line
with the actual product name.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
- cfi: Allow building spi-intel standalone to avoid build issues
- parsers: scpart: Fix __udivdi3 undefined on mips
- parsers: tplink_safeloader: Fix potential memory leak during parsing
- Update email of Tudor Ambarus
* tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
MAINTAINERS: Update email of Tudor Ambarus
mtd: cfi: allow building spi-intel standalone
mtd: parsers: scpart: fix __udivdi3 undefined on mips
mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
|
|
Two new auxiliary vector entries are introduced for rseq without
matching increment of the AT_VECTOR_SIZE_BASE, which causes failures
with CONFIG_HARDENED_USERCOPY=y.
Fixes: 317c8194e6ae ("rseq: Introduce feature size and alignment ELF auxiliary vector entries")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230104192054.34046-1-mathieu.desnoyers@efficios.com
|
|
Support for all the dm3xx/dm64xx SoCs is no longer
available, so drop all other references to those.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After the removal of the unused board files, I went through the
omap1 code to look for code that no longer has any callers
and remove that.
In particular, support for the omap7xx/omap8xx family is now
completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: linux-omap@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The rename from mm->mmap_sem to mm->mmap_lock was performed in commit
da1c55f1b272 ("mmap locking API: rename mmap_sem to mmap_lock") and commit
c1e8d7c6a7a6 ("map locking API: convert mmap_sem comments"), however some
incorrect comments remain.
This patch simply corrects those comments which are obviously incorrect
within mm itself.
Link: https://lkml.kernel.org/r/33fba04389ab63fc4980e7ba5442f521df6dc657.1673048927.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 449c796768c9 ("mm: teach release_pages() to take an array of
encoded page pointers too") added the kernel doc comment for
release_pages() on top of 'union release_pages_arg', so making 'make
htmldocs' complains as below:
./include/linux/mm.h:1268: warning: cannot understand function prototype: 'typedef union '
The kernel doc comment for the function is already on top of the
function's definition in mm/swap.c, and the new comment is actually not
for the function but indeed release_pages_arg. Fixing the comment to
reflect the intent would be one option. But, kernel doc cannot parse
the union as below due to the attribute.
./include/linux/mm.h:1272: error: Cannot parse struct or union!
Modify the comment to reflect the intent but do not mark it as a kernel
doc comment.
Link: https://lkml.kernel.org/r/20230106203331.127532-1-sj@kernel.org
Fixes: 449c796768c9 ("mm: teach release_pages() to take an array of encoded page pointers too")
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
free_anon_vma_name() is missing a check for anonymous shmem VMA which
leads to a memory leak due to refcount not being dropped. Fix this by
calling anon_vma_name_put() unconditionally. It will free vma->anon_name
whenever it's non-NULL.
Link: https://lkml.kernel.org/r/20230105000241.1450843-1-surenb@google.com
Fixes: d09e8ca6cb93 ("mm: anonymous shared memory naming")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+91edf9178386a07d06a7@syzkaller.appspotmail.com
Cc: Hugh Dickins <hughd@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No iommu driver implements this any more, get rid of it.
Link: https://lore.kernel.org/r/9-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
s390 doesn't use irq_domains, so it has no place to set
IRQ_DOMAIN_FLAG_ISOLATED_MSI. Instead of continuing to abuse the iommu
subsystem to convey this information add a simple define which s390 can
make statically true. The define will cause msi_device_has_isolated() to
return true.
Remove IOMMU_CAP_INTR_REMAP from the s390 iommu driver.
Link: https://lore.kernel.org/r/8-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
What x86 calls "interrupt remapping" is one way to achieve isolated MSI,
make it clear this is talking about isolated MSI, no matter how it is
achieved. This matches the new driver facing API name of
msi_device_has_isolated_msi()
No functional change.
Link: https://lore.kernel.org/r/6-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
After converting the users of irq_domain_check_msi_remap() it and the
helpers are no longer needed.
The new version does not require all the #ifdef helpers and inlines
because CONFIG_GENERIC_MSI_IRQ always requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/5-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Compute the isolated_msi over all the devices in the IOMMU group because
iommufd and vfio both need to know that the entire group is isolated
before granting access to it.
Link: https://lore.kernel.org/r/2-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This will replace irq_domain_check_msi_remap() in following patches.
The new API makes it more clear what "msi_remap" actually means from a
functional perspective instead of identifying an implementation specific
HW feature.
Isolated MSI means that HW modeled by an irq_domain on the path from the
initiating device to the CPU will validate that the MSI message specifies
an interrupt number that the device is authorized to trigger. This must
block devices from triggering interrupts they are not authorized to
trigger. Currently authorization means the MSI vector is one assigned to
the device.
This is interesting for securing VFIO use cases where a rouge MSI (eg
created by abusing a normal PCI MemWr DMA) must not allow the VFIO
userspace to impact outside its security domain, eg userspace triggering
interrupts on kernel drivers, a VM triggering interrupts on the
hypervisor, or a VM triggering interrupts on another VM.
As this is actually modeled as a per-irq_domain property, not a global
platform property, correct the interface to accept the device parameter
and scan through only the part of the irq_domains hierarchy originating
from the source device.
Locate the new code in msi.c as it naturally only works with
CONFIG_GENERIC_MSI_IRQ, which also requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/1-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It is not used outside of its compilation unit, so there's no need to
export this variable.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20221227232152.3094584-1-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add kerneldoc comments to struct console.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-4-john.ogness@linutronix.de
|
|
Rather than manually calculating powers of 2, use the BIT() macros.
Also take this opportunatity to cleanup and restructure the value
comments into proper kerneldoc comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-3-john.ogness@linutronix.de
|
|
The size limit macros are located further down in printk.c and
behind ifdef conditionals. This complicates their usage for
upcoming changes. Move the macros into internal.h so that they
are still invisible outside of printk, but easily accessible
for printk.
Also, the maximum size of formatted extended messages does not
need to be known by any code outside of printk, so move it to
internal.h as well. And like CONSOLE_LOG_MAX, for !CONFIG_PRINTK
set CONSOLE_EXT_LOG_MAX to 0 to reduce the static memory
footprint.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-2-john.ogness@linutronix.de
|
|
locks_inode was turned into a wrapper around file_inode in de2a4a501e71
(Partially revert "locks: fix file locking on overlayfs"). Finish
replacing locks_inode invocations everywhere with file_inode.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.
Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-01-10
1) From Gal: Add debugfs entries for netdev nic driver
- ktls, flow steering and hairpin info
- useful for debug and performance analysis
- e.g hairpin queue attributes, dump ktls tx pool size, etc
2) From Maher: Update shared buffer configuration on PFC commands
2.1) For every change of buffer's headroom, recalculate the size of shared
buffer to be equal to "total_buffer_size" - "new_headroom_size".
The new shared buffer size will be split in ratio of 3:1 between
lossy and lossless pools, respectively.
2.2) For each port buffer change, count the number of lossless buffers.
If there is only one lossless buffer, then set its lossless pool
usage threshold to be infinite. Otherwise, if there is more than
one lossless buffer, set a usage threshold for each lossless buffer.
While at it, add more verbosity to debug prints when handling user
commands, to assist in future debug.
3) From Tariq: Throttle high rate FW commands
4) From Shay: Properly initialize management PF
5) Various cleanup patches
|
|
This patch adds support in phylib to read/write PLCA configuration for
Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA
Management Registers" specifications. These can be found at
https://www.opensig.org/about/specifications/
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S
Ethernet PHY. According to the specifications, the 10BASE-T1S supports
Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or
Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This patch adds the appropriate netlink interface
to ethtool.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Certain connection-based device-offload protocols (like TLS) use
per-connection HW objects to track the state, maintain the context, and
perform the offload properly. Some of these objects are created,
modified, and destroyed via FW commands. Under high connection rate,
this type of FW commands might continuously populate all slots of the FW
command interface and throttle it, while starving other critical control
FW commands.
Limit these throttle commands to using only up to a portion (half) of
the FW command interface slots. FW commands maximal rate is not hit, and
the same high rate is still reached when applying this limitation.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Enable initialization of DPU Management PF, which is a new loopback PF
designed for communication with BMC.
For now Management PF doesn't support nor require most upper layer
protocols so avoid them.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add the shared receive buffer management and configuration registers:
1. SBPR - Shared Buffer Pools Register
2. SBCM - Shared Buffer Class Management Register
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
drivers-for-6.3
|
|
The SCM VMIDs represent predefined mappings that come from the
irreplaceable and non-omittable firmware that comes with every
Qualcomm SoC (unless you steal engineering samples from the factory)
and help clarify otherwise totally magic numbers which we are
required to pass to the secure world for some parts of the SoC to
work at all (with modem being the prime example).
On top of that, with changes to the rmtfs binding, secure VMIDs will
become useful to have in device trees for readability. Separate them
out and add to include/dt-bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109130523.298971-3-konrad.dybcio@linaro.org
|
|
Some SoCs require that RMTFS is also mapped to the NAV VM. Trying to
power on the modem without that results in the whole platform
crashing and forces a hard reboot within about 2 seconds. Add support
for mapping the region to additional VMs, such as NAV to open a path
towards enabling modem on such platforms.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[Konrad: reword, make conditional and flexible, add a define for NAV VMID]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109130523.298971-2-konrad.dybcio@linaro.org
|
|
Some DSA devices pass through PHY access to the MDIO bus the switch is
on. Add C45 versions of the current C22 helpers for nested accesses to
MDIO busses, so that C22 and C45 can be separated in these DSA
drivers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bitbbanging bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new driver API calls.
The SH Ethernet driver places wrappers around these functions. In
order to not break boards which might be using C45, add similar
wrappers for C45 operations.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that mdiobus_c45_addr() is only used within the MDIO code during
fallback, move the function next to its only users. This function
should not be used any more in drivers, the c45 helpers should be used
in its place, so hiding it away will prevent any new users from being
added.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently C22 and C45 transactions are mixed over a combined API calls
which make use of a special bit in the reg address to indicate if a
C45 transaction should be performed. This makes it impossible to know
if the bus driver actually supports C45. Additionally, many C22 only
drivers don't return -EOPNOTSUPP when asked to perform a C45
transaction, they mistaking perform a C22 transaction.
This is the first step to cleanly separate C22 from C45. To maintain
backwards compatibility until all drivers which are capable of
performing C45 are converted to this new API, the helper functions
will fall back to the older API if the new API is not
supported. Eventually this fallback will be removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zero-length arrays are deprecated [1]. Replace struct bpf_array's union
of 0-length arrays with flexible arrays. Detected with GCC 13, by using
-fstrict-flex-arrays=3:
arch/x86/net/bpf_jit_comp.c: In function 'bpf_tail_call_direct_fixup':
arch/x86/net/bpf_jit_comp.c:606:37: warning: array subscript <unknown> is outside array bounds of 'void *[0]' [-Warray-bounds=]
606 | target = array->ptrs[poke->tail_call.key];
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/filter.h:9,
from arch/x86/net/bpf_jit_comp.c:9:
include/linux/bpf.h:1527:23: note: while referencing 'ptrs'
1527 | void *ptrs[0] __aligned(8);
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230105192646.never.154-kees@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into arm/fixes
ARM: SoC fixes
These are three fixes for mistakes I discovered during the preparation
of the boardfile removal. Robert noticed the accidental removal
of PXA310 and PXA320 support because of a misplaced Kconfig statement,
and the two OMAP patches were build failures that got introduced
earlier but that I found while testing the removal.
* 'armsoc-build-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
ARM: pxa: enable PXA310/PXA320 for DT-only build
|
|
While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like
ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'
I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like
arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]
As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.
Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
