| Age | Commit message (Collapse) | Author |
|---|
|
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since 'JBD2_CHECKPOINT_IO_ERROR' and j_atomic_flags' are not useful
anymore after fs dev's errseq is imported into jbd2, just remove them.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-4-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add errseq in journal, so that JBD2 can detect whether metadata is
successfully written to fs bdev. This patch adds detection in recovery
process to replace original solution(using local variable wb_err).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, it's not allowed to attach an fentry/fexit prog to another
one fentry/fexit. At the same time it's not uncommon to see a tracing
program with lots of logic in use, and the attachment limitation
prevents usage of fentry/fexit for performance analysis (e.g. with
"bpftool prog profile" command) in this case. An example could be
falcosecurity libs project that uses tp_btf tracing programs.
Following the corresponding discussion [1], the reason for that is to
avoid tracing progs call cycles without introducing more complex
solutions. But currently it seems impossible to load and attach tracing
programs in a way that will form such a cycle. The limitation is coming
from the fact that attach_prog_fd is specified at the prog load (thus
making it impossible to attach to a program loaded after it in this
way), as well as tracing progs not implementing link_detach.
Replace "no same type" requirement with verification that no more than
one level of attachment nesting is allowed. In this way only one
fentry/fexit program could be attached to another fentry/fexit to cover
profiling use case, and still no cycle could be formed. To implement,
add a new field into bpf_prog_aux to track nested attachment for tracing
programs.
[1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@kernel.org/
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-2-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
|
|
This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1.
This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8.
This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf.
This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6.
This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b.
This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5.
This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113.
This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e.
This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a.
This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34.
This reverts commit 02018c544ef113e980a2349eba89003d6f399d22.
Looks like we need more time for reviews, and incremental
changes will be hard to make sense of. So revert.
Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For backchannel requests that lookup the appropriate nfs_client, use the
state-management rpc_clnt's rpc_timeout parameters for the backchannel's
response. When the nfs_client cannot be found, fall back to using the
xprt's default timeout parameters.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
bpfilter was supposed to convert iptables filtering rules into
BPF programs on the fly, from the kernel, through a usermode
helper. The base code for the UMH was introduced in 2018, and
couple of attempts (2, 3) tried to introduce the BPF program
generate features but were abandoned.
bpfilter now sits in a kernel tree unused and unusable, occasionally
causing confusion amongst Linux users (4, 5).
As bpfilter is now developed in a dedicated repository on GitHub (6),
it was suggested a couple of times this year (LSFMM/BPF 2023,
LPC 2023) to remove the deprecated kernel part of the project. This
is the purpose of this patch.
[1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/
[2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t
[3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/
[4]: https://dxuuu.xyz/bpfilter.html
[5]: https://github.com/linuxkit/linuxkit/pull/3904
[6]: https://github.com/facebook/bpfilter
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
NFS already has writepages and migrate_folio, so it does not need to
implement writepage. The writepage operation is deprecated as it leads
to worse performance under high memory pressure due to folios being
written out in LRU order rather than sequentially within a file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
AMDSFH has information about the Ambient light via the Ambient
Light Sensor (ALS) which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
AMDSFH has information about the User presence information via the Human
Presence Detection (HPD) sensor which is part of the AMD sensor fusion hub.
Add a new interface to export this information, where other drivers like
PMF can use this information to enhance user experiences.
Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge ACPI thermal zone driver updates for 6.8-rc1:
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann).
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen).
* acpi-thermal:
ACPI: thermal_lib: include "internal.h" for function prototypes
ACPI: thermal: Add Thermal fast Sampling Period (_TFP) support
ACPI: thermal: Use library functions to obtain trip point temperature values
ACPI: thermal_lib: Add functions returning temperature in deci-Kelvin
thermal: ACPI: Move the ACPI thermal library to drivers/acpi/
|
|
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
|
|
Merge ACPI device enumeration updates and ACPI processor driver updates
for 6.8-rc1:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
* acpi-scan:
ACPI: scan: Fix an error message in DisCo for Imaging support
ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging
ACPI: property: Dig "rotation" property for devices with CSI2 _CRS
ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes
device property: Add SOFTWARE_NODE() macro for defining software nodes
ACPI: scan: Extract _CRS CSI-2 connection information into swnodes
ACPI: scan: Extract CSI-2 connection graph from _CRS
ACPI: property: Support using strings in reference properties
* acpi-processor:
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241
ACPI: processor: Provide empty stub of acpi_proc_quirk_mwait_check()
|
|
Move phylink_pcs_neg_mode() from the header file into the .c file since
nothing should be using it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 41a5db8d8161 ("Add support for non-fix-size percpu mem allocation")
added support for non-fix-size percpu memory allocation.
Such allocation will allocate percpu memory for all buckets on all
cpus and the memory consumption is in the order to quadratic.
For example, let us say, 4 cpus, unit size 16 bytes, so each
cpu has 16 * 4 = 64 bytes, with 4 cpus, total will be 64 * 4 = 256 bytes.
Then let us say, 8 cpus with the same unit size, each cpu
has 16 * 8 = 128 bytes, with 8 cpus, total will be 128 * 8 = 1024 bytes.
So if the number of cpus doubles, the number of memory consumption
will be 4 times. So for a system with large number of cpus, the
memory consumption goes up quickly with quadratic order.
For example, for 4KB percpu allocation, 128 cpus. The total memory
consumption will 4KB * 128 * 128 = 64MB. Things will become
worse if the number of cpus is bigger (e.g., 512, 1024, etc.)
In Commit 41a5db8d8161, the non-fix-size percpu memory allocation is
done in boot time, so for system with large number of cpus, the initial
percpu memory consumption is very visible. For example, for 128 cpu
system, the total percpu memory allocation will be at least
(16 + 32 + 64 + 96 + 128 + 196 + 256 + 512 + 1024 + 2048 + 4096)
* 128 * 128 = ~138MB.
which is pretty big. It will be even bigger for larger number of cpus.
Note that the current prefill also allocates 4 entries if the unit size
is less than 256. So on top of 138MB memory consumption, this will
add more consumption with
3 * (16 + 32 + 64 + 96 + 128 + 196 + 256) * 128 * 128 = ~38MB.
Next patch will try to reduce this memory consumption.
Later on, Commit 1fda5bb66ad8 ("bpf: Do not allocate percpu memory
at init stage") moved the non-fix-size percpu memory allocation
to bpf verificaiton stage. Once a particular bpf_percpu_obj_new()
is called by bpf program, the memory allocator will try to fill in
the cache with all sizes, causing the same amount of percpu memory
consumption as in the boot stage.
To reduce the initial percpu memory consumption for non-fix-size
percpu memory allocation, instead of filling the cache with all
supported allocation sizes, this patch intends to fill the cache
only for the requested size. As typically users will not use large
percpu data structure, this can save memory significantly.
For example, the allocation size is 64 bytes with 128 cpus.
Then total percpu memory amount will be 64 * 128 * 128 = 1MB,
much less than previous 138MB.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231222031745.1289082-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The objcg is a bpf_mem_alloc level property since all bpf_mem_cache's
are with the same objcg. This patch made such a property explicit.
The next patch will use this property to save and restore objcg
for percpu unit allocator.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031739.1288590-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xdp_prog is used in receive path, both from XDP enabled drivers
and from netif_elide_gro().
This patch also removes two 4-bytes holes.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240102162220.750823-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a comment describing that the psock update proto callbback can be
called multiple times and this must be safe.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-3-john.fastabend@gmail.com
|
|
Now that the driver core can properly handle constant struct bus_type,
move the nubus_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
It's also never used outside of drivers/nubus/bus.c so make it static
and don't export it as no one is using it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/2023121940-enlarged-editor-c9a8@gregkh
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
It isn't used by any driver or API, privatize it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.
The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This reverts commit cff9c565e65f3622e8dc1dcc21c1520a083dff35.
Revert based on feedback from Russell.
Link: https://lore.kernel.org/all/ZZPtUIRerqTI2%2Fyh@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The eMMC card can be set into write-protected mode to prevent data from
being accidentally modified or deleted. Wp_grp_size (Write Protect Group
Size) refers to an attribute of the eMMC card, used to manage write
protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size
(Write Protect Group Size) indicates how many eMMC blocks are contained in
each write protection group on the eMMC card.
To allow userspace easy access of the CSD register bits, let's add sysfs
node "wp_grp_size".
Signed-off-by: Lin Gui <lin.gui@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal control material for 6.8-rc1 from Daniel Lezcano:
"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fixed DT bindings issue on Loongson (Binbin Zhou)
- Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)
- Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)
- Added a reboot on critical option feature (Fabio Estevam)
- Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)
- Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)
- Fixed example in the DT binding for QCom SPMI (Johan Hovold)
- Fixed compilation warning for the tmon utility (Florian Eckert)
- Added interrupt based configuration on Exynos along with a set of
related cleanups (Mateusz Majewski)"
* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
thermal/thermal_of: Allow rebooting after critical temp
reboot: Introduce thermal_zone_device_critical_reboot()
thermal/core: Prepare for introduction of thermal reboot
dt-bindings: thermal-zones: Document critical-action
...
|
|
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the "private:" comment to prevent the kernel-doc warning:
include/linux/wmi.h:27: warning: Excess struct member 'setable' description in 'wmi_device'
Either a struct member is documented (via kernel-doc) or it's private,
but not both.
Fixes: b4cc979588ee ("platform/x86: wmi: Add kernel doc comments")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231223194321.23084-1-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The struct bus_type pointer in hid_bpf_ops just passes the pointer to
the driver core, and the driver core can handle, and expects, a constant
pointer, so also make the pointer constant in hid_bpf_ops.
Part of the process of moving all usages of struct bus_type to be
constant to move them all to read-only memory.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pick up these commits from Linus's tree:
b106bcf0f99a ("locking/osq_lock: Clarify osq_wait_next()")
563adbfc351b ("locking/osq_lock: Clarify osq_wait_next() calling convention")
7c2230982129 ("locking/osq_lock: Move the definition of optimistic_spin_node into osq_lock.c")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Introduce thermal_zone_device_critical_reboot() to trigger an
emergency reboot.
It is a counterpart of thermal_zone_device_critical() with the
difference that it will force a reboot instead of shutdown.
The motivation for doing this is to allow the thermal subystem
to trigger a reboot when the temperature reaches the critical
temperature.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-3-festevam@gmail.com
|
|
Add some helper functions to make it easier introducing the support
for thermal reboot.
No functional change.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-2-festevam@gmail.com
|
|
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During our experiment with zswap, we sometimes observe swap IOs due to
occasional zswap store failures and writebacks-to-swap. These swapping
IOs prevent many users who cannot tolerate swapping from adopting zswap to
save memory and improve performance where possible.
This patch adds the option to disable this behavior entirely: do not
writeback to backing swapping device when a zswap store attempt fail, and
do not write pages in the zswap pool back to the backing swap device (both
when the pool is full, and when the new zswap shrinker is called).
This new behavior can be opted-in/out on a per-cgroup basis via a new
cgroup file. By default, writebacks to swap device is enabled, which is
the previous behavior. Initially, writeback is enabled for the root
cgroup, and a newly created cgroup will inherit the current setting of its
parent.
Note that this is subtly different from setting memory.swap.max to 0, as
it still allows for pages to be stored in the zswap pool (which itself
consumes swap space in its current form).
This patch should be applied on top of the zswap shrinker series:
https://lore.kernel.org/linux-mm/20231130194023.4102148-1-nphamcs@gmail.com/
as it also disables the zswap shrinker, a major source of zswap
writebacks.
For the most part, this feature is motivated by internal parties who
have already established their opinions regarding swapping - the
workloads that are highly sensitive to IO, and especially those who are
using servers with really slow disk performance (for instance, massive
but slow HDDs). For these folks, it's impossible to convince them to
even entertain zswap if swapping also comes as a packaged deal.
Writeback disabling is quite a useful feature in these situations - on
a mixed workloads deployment, they can disable writeback for the more
IO-sensitive workloads, and enable writeback for other background
workloads.
For instance, on a server with HDD, I allocate memories and populate
them with random values (so that zswap store will always fail), and
specify memory.high low enough to trigger reclaim. The time it takes
to allocate the memories and just read through it a couple of times
(doing silly things like computing the values' average etc.):
zswap.writeback disabled:
real 0m30.537s
user 0m23.687s
sys 0m6.637s
0 pages swapped in
0 pages swapped out
zswap.writeback enabled:
real 0m45.061s
user 0m24.310s
sys 0m8.892s
712686 pages swapped in
461093 pages swapped out
(the last two lines are from vmstat -s).
[nphamcs@gmail.com: add a comment about recurring zswap store failures leading to reclaim inefficiency]
Link: https://lkml.kernel.org/r/20231221005725.3446672-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231207192406.3809579-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Heidelberg <david@ixit.cz>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-20
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove duplicate definitions, no functional changes.
Link: https://lkml.kernel.org/r/MW4PR84MB3145459ADC7EB38BBB36955B8198A@MW4PR84MB3145.NAMPRD84.PROD.OUTLOOK.COM
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
crc_ccitt_false() was introduced in commit 0d85adb5fbd33 ("lib/crc-ccitt:
Add CCITT-FALSE CRC16 variant"), but it is redundant with crc_itu_t().
Since the latter is more used, it is the one being kept.
Link: https://lkml.kernel.org/r/20231219131154.748577-1-Mathis.Marion@silabs.com
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's convert it like we converted all the other rmap functions. Don't
introduce folio_try_share_anon_rmap_ptes() for now, as we don't have a
user that wants rmap batching in sight. Pretty easy to add later.
All users are easy to convert -- only ksm.c doesn't use folios yet but
that is left for future work -- so let's just do it in a single shot.
While at it, turn the BUG_ON into a WARN_ON_ONCE.
Note that page_try_share_anon_rmap() so far didn't care about pte/pmd
mappings (no compound parameter). We're changing that so we can perform
better sanity checks and make the code actually more readable/consistent.
For example, __folio_rmap_sanity_checks() will make sure that a PMD range
actually falls completely into the folio.
Link: https://lkml.kernel.org/r/20231220224504.646757-39-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users are gone, remove page_try_dup_anon_rmap() and any remaining
traces.
Link: https://lkml.kernel.org/r/20231220224504.646757-38-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last user of page_needs_cow_for_dma() and __page_dup_rmap() are gone,
remove them.
Add folio_try_dup_anon_rmap_ptes() right away, we want to perform rmap
baching during fork() soon.
Link: https://lkml.kernel.org/r/20231220224504.646757-35-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
