summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2019-08-26mtd: nand: fix typo, s/erasablocks/eraseblocksTudor Ambarus
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: sharpsl: add include guard to linux/mtd/sharpsl.hMasahiro Yamada
Add a header include guard just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping fix from Thomas Gleixner: "A single fix for a regression caused by the generic VDSO implementation where a math overflow causes CLOCK_BOOTTIME to become a random number generator" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Prevent math overflow in BOOTTIME update
2019-08-25PM / devfreq: events: extend events by type of counted dataLukasz Luba
This patch adds posibility to choose what type of data should be counted by the PPMU counter. Now the type comes from DT where the event has been defined. When there is no 'event-data-type' the default value is used, which is 'read+write data in bytes'. It is needed when you want to know not only read+write data bytes but i.e. only write data in byte, or number of read requests, etc. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [Updated property by MyungJoo. data_type --> event_type] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-08-24Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Two fixes for regressions in this merge window: - select the Kconfig symbols for the noncoherent dma arch helpers on arm if swiotlb is selected, not just for LPAE to not break then Xen build, that uses swiotlb indirectly through swiotlb-xen - fix the page allocator fallback in dma_alloc_contiguous if the CMA allocation fails" * tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix zone selection after an unaddressable CMA allocation arm: select the dma-noncoherent symbols for all swiotlb builds
2019-08-24Merge tag 'gpio-v5.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a (hopefully last) set of GPIO fixes for the v5.3 kernel cycle. Two are pretty core: - Fix not reporting open drain/source lines to userspace as "input" - Fix a minor build error found in randconfigs - Fix a chip select quirk on the Freescale SPI - Fix the irqchip initialization semantic order to reflect what it was using the old API" * tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix irqchip initialization order gpio: of: fix Freescale SPI CS quirk handling gpio: Fix build error of function redefinition gpiolib: never report open-drain/source lines as 'input' to user-space
2019-08-24net: use unlikely for dql_avail casexiaolinkui
This is an unlikely case, use unlikely() on it seems logical. Signed-off-by: xiaolinkui <xiaolinkui@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23Merge tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Three important fixes tagged for stable (an indefinite hang, a crash on an assert and a NULL pointer dereference) plus a small series from Luis fixing instances of vfree() under spinlock" * tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-client: libceph: fix PG split vs OSD (re)connect race ceph: don't try fill file_lock on unsuccessful GETFILELOCK reply ceph: clear page dirty before invalidate page ceph: fix buffer free while holding i_ceph_lock in fill_inode() ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob() ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr() libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer
2019-08-23Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2019-08-23fdt: add support for rng-seedHsin-Yi Wang
Introducing a chosen node, rng-seed, which is an entropy that can be passed to kernel called very early to increase initial device randomness. Bootloader should provide this entropy and the value is read from /chosen/rng-seed in DT. Obtain of_fdt_crc32 for CRC check after early_init_dt_scan_nodes(), since early_init_dt_scan_chosen() would modify fdt to erase rng-seed. Add a new interface add_bootloader_randomness() for rng-seed use case. Depends on whether the seed is trustworthy, rng seed would be passed to add_hwgenerator_randomness(). Otherwise it would be passed to add_device_randomness(). Decision is controlled by kernel config RANDOM_TRUST_BOOTLOADER. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> # drivers/char/random.c Signed-off-by: Will Deacon <will@kernel.org>
2019-08-23f2fs: include charset encoding information in the superblockDaniel Rosenberg
Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-23f2fs: fix panic of IO alignment featureChao Yu
Since 07173c3ec276 ("block: enable multipage bvecs"), one bio vector can store multi pages, so that we can not calculate max IO size of bio as PAGE_SIZE * bio->bi_max_vecs. However IO alignment feature of f2fs always has that assumption, so finally, it may cause panic during IO submission as below stack. kernel BUG at fs/f2fs/data.c:317! RIP: 0010:__submit_merged_bio+0x8b0/0x8c0 Call Trace: f2fs_submit_page_write+0x3cd/0xdd0 do_write_page+0x15d/0x360 f2fs_outplace_write_data+0xd7/0x210 f2fs_do_write_data_page+0x43b/0xf30 __write_data_page+0xcf6/0x1140 f2fs_write_cache_pages+0x3ba/0xb40 f2fs_write_data_pages+0x3dd/0x8b0 do_writepages+0xbb/0x1e0 __writeback_single_inode+0xb6/0x800 writeback_sb_inodes+0x441/0x910 wb_writeback+0x261/0x650 wb_workfn+0x1f9/0x7a0 process_one_work+0x503/0x970 worker_thread+0x7d/0x820 kthread+0x1ad/0x210 ret_from_fork+0x35/0x40 This patch adds one extra condition to check left space in bio while trying merging page to bio, to avoid panic. This bug was reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204043 Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-23soc: mediatek: cmdq: change the type of input parameterBibby Hsieh
According to the cmdq hardware design, the subsys is u8, the offset is u16 and the event id is u16. This patch changes the type of subsys, offset and event id to the correct type. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23soc: mediatek: cmdq: reorder the parameterBibby Hsieh
The order of gce instructions is [subsys offset value] so reorder the parameter of cmdq_pkt_write_mask and cmdq_pkt_write function. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23gpio: Move gpiochip_lock/unlock_as_irq to gpio/driver.hYueHaibing
If CONFIG_GPIOLIB is not, gpiochip_lock/unlock_as_irq will conflict as this: In file included from sound/soc/codecs/wm5100.c:18:0: ./include/linux/gpio.h:224:19: error: static declaration of gpiochip_lock_as_irq follows non-static declaration static inline int gpiochip_lock_as_irq(struct gpio_chip *chip, ^~~~~~~~~~~~~~~~~~~~ In file included from sound/soc/codecs/wm5100.c:17:0: ./include/linux/gpio/driver.h:494:5: note: previous declaration of gpiochip_lock_as_irq was here int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset); ^~~~~~~~~~~~~~~~~~~~ In file included from sound/soc/codecs/wm5100.c:18:0: ./include/linux/gpio.h:231:20: error: static declaration of gpiochip_unlock_as_irq follows non-static declaration static inline void gpiochip_unlock_as_irq(struct gpio_chip *chip, ^~~~~~~~~~~~~~~~~~~~~~ In file included from sound/soc/codecs/wm5100.c:17:0: ./include/linux/gpio/driver.h:495:6: note: previous declaration of gpiochip_unlock_as_irq was here void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset); ^~~~~~~~~~~~~~~~~~~~~~ Move them to gpio/driver.h and use CONFIG_GPIOLIB guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d74be6dfea1b ("gpio: remove gpiod_lock/unlock_as_irq()") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190822031817.32888-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23pinctrl/gpio: Take MUX usage into accountStefan Wahren
The user space like gpioinfo only see the GPIO usage but not the MUX usage (e.g. I2C or SPI usage) of a pin. As a user we want to know which pin is free/safe to use. So take the MUX usage of strict pinmux controllers into account to get a more realistic view for ioctl GPIO_GET_LINEINFO_IOCTL. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Link: https://lore.kernel.org/r/20190814110035.13451-1-ramon.fried@linux.intel.com Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23fbdev: drop res_id parameter from remove_conflicting_pci_framebuffersGerd Hoffmann
Since commit b0e999c95581 ("fbdev: list all pci memory bars as conflicting apertures") the parameter was used for some sanity checks only, to make sure we detect any issues with the new approach to just list all memory bars as apertures. No issues turned up so far, so continue to cleanup: Drop the res_id parameter, drop the sanity checks. Also downgrade the logging from "info" level to "debug" level and update documentation. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-2-kraxel@redhat.com
2019-08-23iommu: Add helpers to set/get default domain typeJoerg Roedel
Add a couple of functions to allow changing the default domain type from architecture code and a function for iommu drivers to request whether the default domain is passthrough. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-23soundwire: intel: handle disabled linksPierre-Louis Bossart
On most hardware platforms, SoundWire interfaces are pin-muxed with other interfaces (typically DMIC or I2S) and the status of each link needs to be checked at boot time. For Intel platforms, the BIOS provides a menu to enable/disable the links separately, and the information is provided to the OS with an Intel-specific _DSD property. The same capability will be added to revisions of the MIPI DisCo specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: add debugfs supportPierre-Louis Bossart
Add base debugfs mechanism for SoundWire bus by creating soundwire root and master-N and slave-x hierarchy. Also add SDW Slave SCP, DP0 and DP-N register debug file. Registers not implemented will print as "XX" Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23timekeeping/vsyscall: Prevent math overflow in BOOTTIME updateThomas Gleixner
The VDSO update for CLOCK_BOOTTIME has a overflow issue as it shifts the nanoseconds based boot time offset left by the clocksource shift. That overflows once the boot time offset becomes large enough. As a consequence CLOCK_BOOTTIME in the VDSO becomes a random number causing applications to misbehave. Fix it by storing a timespec64 representation of the offset when boot time is adjusted and add that to the MONOTONIC base time value in the vdso data page. Using the timespec64 representation avoids a 64bit division in the update code. Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908221257580.1983@nanos.tec.linutronix.de
2019-08-22Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU and LKMM changes from Paul E. McKenney: - A few more RCU flavor consolidation cleanups. - Miscellaneous fixes. - Updates to RCU's list-traversal macros improving lockdep usability. - Torture-test updates. - Forward-progress improvements for no-CBs CPUs: Avoid ignoring incoming callbacks during grace-period waits. - Forward-progress improvements for no-CBs CPUs: Use ->cblist structure to take advantage of others' grace periods. - Also added a small commit that avoids needlessly inflicting scheduler-clock ticks on callback-offloaded CPUs. - Forward-progress improvements for no-CBs CPUs: Reduce contention on ->nocb_lock guarding ->cblist. - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass list to further reduce contention on ->nocb_lock guarding ->cblist. - LKMM updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-22driver core: initialize a default DMA mask for platform deviceChristoph Hellwig
We still treat devices without a DMA mask as defaulting to 32-bits for both mask, but a few releases ago we've started warning about such cases, as they require special cases to work around this sloppyness. Add a dma_mask field to struct platform_device so that we can initialize the dma_mask pointer in struct device and initialize both masks to 32-bits by default, replacing similar functionality in m68k and powerpc. The arch_setup_pdev_archdata hooks is now unused and removed. Note that the code looks a little odd with the various conditionals because we have to support platform_device structures that are statically allocated. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20190816062435.881-7-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-22libceph: allow ceph_buffer_put() to receive a NULL ceph_bufferLuis Henriques
Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-22net/mlx5: Add HV VHCA infrastructureEran Ben Elisha
HV VHCA is a layer which provides PF to VF communication channel based on HyperV PCI config channel. It implements Mellanox's Inter VHCA control communication protocol. The protocol contains control block in order to pass messages between the PF and VF drivers, and data blocks in order to pass actual data. The infrastructure is agent based. Each agent will be responsible of contiguous buffer blocks in the VHCA config space. This infrastructure will bind agents to their blocks, and those agents can only access read/write the buffer blocks assigned to them. Each agent will provide three callbacks (control, invalidate, cleanup). Control will be invoked when block-0 is invalidated with a command that concerns this agent. Invalidate callback will be invoked if one of the blocks assigned to this agent was invalidated. Cleanup will be invoked before the agent is being freed in order to clean all of its open resources or deferred works. Block-0 serves as the control block. All execution commands from the PF will be written by the PF over this block. VF will ack on those by writing on block-0 as well. Its format is described by struct mlx5_hv_vhca_control_block layout. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22PCI: hv: Add a Hyper-V PCI interface driver for software backchannel interfaceHaiyang Zhang
This interface driver is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22PCI: hv: Add a paravirtual backchannel in softwareDexuan Cui
Windows SR-IOV provides a backchannel mechanism in software for communication between a VF driver and a PF driver. These "configuration blocks" are similar in concept to PCI configuration space, but instead of doing reads and writes in 32-bit chunks through a very slow path, packets of up to 128 bytes can be sent or received asynchronously. Nearly every SR-IOV device contains just such a communications channel in hardware, so using this one in software is usually optional. Using the software channel, however, allows driver implementers to leverage software tools that fuzz the communications channel looking for vulnerabilities. The usage model for these packets puts the responsibility for reading or writing on the VF driver. The VF driver sends a read or a write packet, indicating which "block" is being referred to by number. If the PF driver wishes to initiate communication, it can "invalidate" one or more of the first 64 blocks. This invalidation is delivered via a callback supplied by the VF driver by this driver. No protocol is implied, except that supplied by the PF and VF drivers. Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22crypto: sha256 - Move lib/sha256.c to lib/cryptoHans de Goede
Generic crypto implementations belong under lib/crypto not directly in lib, likewise the header should be in include/crypto, not include/linux. Note that the code in lib/crypto/sha256.c is not yet available for generic use after this commit, it is still only used by the s390 and x86 purgatory code. Making it suitable for generic use is done in further patches in this series. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-21mm/mmu_notifiers: remove unregister_no_releaseJason Gunthorpe
mmu_notifier_unregister_no_release() and mmu_notifier_call_srcu() no longer have any users, they have all been converted to use mmu_notifier_put(). So delete this difficult to use interface. Link: https://lore.kernel.org/r/20190806231548.25242-12-jgg@ziepe.ca Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21Merge branch 'odp_fixes' into hmm.gitJason Gunthorpe
From rdma.git Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies, and is being taken into hmm.git due to dependencies in the next patches. * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21posix-cpu-timers: Remove tsk argument from run_posix_cpu_timers()Thomas Gleixner
It's always current. Don't give people wrong ideas. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190819143801.945469967@linutronix.de
2019-08-21ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.cMasahiro Yamada
This is only used by arch/arm/mach-s3c64xx/setup-usb-phy.c $ git grep samsung_usb_phy_type include/linux/usb/samsung_usb_phy.h:enum samsung_usb_phy_type { $ git grep USB_PHY_TYPE_DEVICE arch/arm/mach-s3c64xx/setup-usb-phy.c: if (type == USB_PHY_TYPE_DEVICE) arch/arm/mach-s3c64xx/setup-usb-phy.c: if (type == USB_PHY_TYPE_DEVICE) include/linux/usb/samsung_usb_phy.h: USB_PHY_TYPE_DEVICE, $ git grep USB_PHY_TYPE_HOST include/linux/usb/samsung_usb_phy.h: USB_PHY_TYPE_HOST, Actually, 'enum samsung_usb_phy_type' is unused; the 'type' parameter has 'int' type. Anyway, there is no need to declare this enum in the globally visible header. Squash the header. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-21Merge branch 'odp_fixes' into rdma.git for-nextJason Gunthorpe
Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21dma-mapping: remove is_device_dma_capableChristoph Hellwig
No users left. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190816062435.881-6-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usb: add a HCD_DMA flag instead of guestimating DMA capabilitiesChristoph Hellwig
The usb core is the only major place in the kernel that checks for a non-NULL device dma_mask to see if a device is DMA capable. This is generally a bad idea, as all major busses always set up a DMA mask, even if the device is not DMA capable - in fact bus layers like PCI can't even know if a device is DMA capable at enumeration time. This leads to lots of workaround in HCD drivers, and also prevented us from setting up a DMA mask for platform devices by default last time we tried. Replace this guess with an explicit HCD_DMA that is set by drivers that appear to have DMA support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190816062435.881-4-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21net/mlx5: Create bypass and loopback flow steering namespaces for RDMA RXMark Zhang
Use different namespaces for bypass and switchdev loopback because they have different priorities and default table miss action requirement: 1. bypass: with multiple priorities support, and MLX5_FLOW_TABLE_MISS_ACTION_DEF as the default table miss action; 2. switchdev loopback: with single priority support, and MLX5_FLOW_TABLE_MISS_ACTION_SWITCH_DOMAIN as the default table miss action. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-21extable: Add function to search only kernel exception tableSantosh Sivaraj
Certain architecture specific operating modes (e.g., in powerpc machine check handler that is unable to access vmalloc memory), the search_exception_tables cannot be called because it also searches the module exception tables if entry is not found in the kernel exception table. Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820081352.8641-5-santosh@fossix.org
2019-08-21Merge tag 'v5.3-rc5' into develLinus Walleij
Linux 5.3-rc5
2019-08-21soundwire: add new mclk_freq field for propertiesPierre-Louis Bossart
To help pass platform-specific values, add a new field that can either be set by the Master driver or read from firmware (BIOS/DT). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: include mod_devicetable.h to avoid compiling warningsBard liao
When integrating SoundWire, kbuild throws this warning with randconfig: >> include/linux/soundwire/sdw.h:571:17: warning: 'struct sdw_device_id' declared inside parameter list will not be visible outside of this definition or declaration const struct sdw_device_id *id); ^~~~~~~~~~~~~ Fix by adding the relevant include Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: prevent possible dereference in hw_paramsPierre-Louis Bossart
This should not happen in production systems but we should test for all callback arguments before invoking the config_stream callback. Update the prototype to clarify that the first argument is mandatory. Also use local variable instead of multiple dereferences to improve readability. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21Merge tag 'drm-misc-next-2019-08-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: add reservation_object_fences helper, relax reservation_object_add_shared_fence, remove reservation_object seq number (and then restored) - dma-fence: Shrinkage of the dma_fence structure, Merge dma_fence_signal and dma_fence_signal_locked, Store the timestamp in struct dma_fence in a union with cb_list Driver Changes: - More dt-bindings YAML conversions - More removal of drmP.h includes - dw-hdmi: Support get_eld and various i2s improvements - gm12u320: Few fixes - meson: Global cleanup - panfrost: Few refactors, Support for GPU heap allocations - sun4i: Support for DDC enable GPIO - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: fixup dma_resv rename fallout] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
2019-08-21PM: QoS: Get rid of unused flagsAmit Kucheria
The network_latency and network_throughput flags for PM-QoS have not found much use in drivers or in userspace since they were introduced. Commit 4a733ef1bea7 ("mac80211: remove PM-QoS listener") removed the only user PM_QOS_NETWORK_LATENCY in the kernel a while ago and there don't seem to be any userspace tools using the character device files either. PM_QOS_MEMORY_BANDWIDTH was never even added to the trace events. Remove all the flags except cpu_dma_latency. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-21PM / wakeup: Show wakeup sources stats in sysfsTri Vo
Add an ID and a device pointer to 'struct wakeup_source'. Use them to to expose wakeup sources statistics in sysfs under /sys/class/wakeup/wakeup<ID>/*. Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tri Vo <trong@android.com> Tested-by: Kalesh Singh <kaleshsingh@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-21PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare()Tri Vo
wakeup_source_init() has no users. Remove it. As a result, wakeup_source_prepare() is only called from wakeup_source_create(). Merge wakeup_source_prepare() into wakeup_source_create() and remove it. Change wakeup_source_create() behavior so that assigning NULL to wakeup source's name throws an error. Signed-off-by: Tri Vo <trong@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-21dma-direct: fix zone selection after an unaddressable CMA allocationChristoph Hellwig
The new dma_alloc_contiguous hides if we allocate CMA or regular pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA allocation succeeds but isn't addressable. That means we either fail outright or dip into a small zone that might not succeed either. Thanks to Hillf Danton for debugging this issue. Fixes: b1d2dc009dec ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-20net/mlx5: Add lag_tx_port_affinity capability bitMaxim Mikityanskiy
Add the lag_tx_port_affinity HCA capability bit that indicates that setting port affinity of TISes is supported. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-20net/mlx5: Expose IP-in-IP capability bitAya Levin
Expose Fw indication that it supports Stateless Offloads for IP over IP tunneled packets. The following offloads are supported for the inner packets: RSS, RX & TX Checksum Offloads, LSO and Flow Steering. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-20net/mlx5: Add support for VNIC_ENV internal rq counterMoshe Shemesh
Add mlx5 interface support for reading internal rq out of buffer counter as part of QUERY_VNIC_ENV command. The command is used by the driver to query vnic diagnostic statistics from FW. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-20alarmtimers: Avoid rtc.h includeThomas Gleixner
rtc.h is not needed in alarmtimers when a forward declaration of struct rtc_device is provided. That allows to include posix-timers.h without adding more includes to alarmtimer.h or creating circular include dependencies. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190819143801.565389536@linutronix.de
generated by cgit (git 2.34.1) at 2025-09-19 12:08:53 +0000