| Age | Commit message (Collapse) | Author |
|---|
|
Use the correct struct member name in the kernel-doc notation
to prevent a kernel-doc build warning.
include/linux/jbd2.h:1303: warning: Function parameter or struct member 'j_transaction_overhead_buffers' not described in 'journal_s'
include/linux/jbd2.h:1303: warning: Excess struct member 'j_transaction_overhead' description in 'journal_s'
Fixes: e3a00a23781c ("jbd2: precompute number of transaction descriptor blocks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240710182252.4c281445@canb.auug.org.au/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240723051647.3053491-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
|
|
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247efb ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").
Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Currently, we copy the mtime and ctime to the in-core inode and then
mark the inode dirty. This is fine for certain types of filesystems, but
not all. Some require a real setattr to properly change these values
(e.g. ceph or reexported NFS).
Fix this code to call notify_change() instead, which is the proper way
to effect a setattr. There is one problem though:
In this case, the client is holding a write delegation and has sent us
attributes to update our cache. We don't want to break the delegation
for this since that would defeat the purpose. Add a new ATTR_DELEG flag
that makes notify_change bypass the try_break_deleg call.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
pstore_dump() is called when both preemption and local IRQ are disabled,
and a spinlock is obtained, which is problematic for the RT kernel because
in this configuration, spinlocks are sleep locks.
Replace the spinlock_t with raw_spinlock_t to avoid sleeping in atomic context.
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: linux-hardening@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20240819145945.61274-1-wen.yang@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Allowing iounmap() on memory that was not ioremap()'d in the first
place is obviously a bad idea. There is currently a feeble attempt to
avoid errant iounmap()s by checking to see if the address is below
"high_memory". But that's imprecise at best because there are plenty
of high addresses that are also invalid to call iounmap() on.
Thankfully, there is a more precise helper: is_ioremap_addr(). x86
just does not use it in iounmap().
Restrict iounmap() to addresses in the ioremap region, by using
is_ioremap_addr(). This aligns x86 closer to the generic iounmap()
implementation.
Additionally, add a warning in case there is an attempt to iounmap()
invalid memory. This replaces an existing silent return and will
help alert folks to any incorrect usage of iounmap().
Due to VMALLOC_START on i386 not being present in asm/pgtable.h,
include for asm/vmalloc.h had to be added to include/linux/ioremap.h.
[ dhansen: tweak subject and changelog ]
Signed-off-by: Max Ramanouski <max8rr8@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/all/20240824220111.84441-1-max8rr8%40gmail.com
|
|
Rename apptag and appmask to lbat and lbatm so that it matches the field
names used in NVMe spec.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Correct spelling in Networking headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in if_rmnet.h
As reported by codespell.
Cc: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-6-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).
Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending a RDMA_CM_REQUEST, the NVMe RDMA Transport Specification
allows you to populate the cntlid field in the RDMA_CM_REQUEST Private
Data.
The cntlid is returned by the target on completion of the first
RDMA_CM_REQUEST command (which creates the admin queue).
The cntlid field can then be populated by the host when the I/O queues
are created (using additional RDMA_CM_REQUEST commands), such that the
target can perform extra validation for additional RDMA_CM_REQUEST
commands.
This additional error code and error message is also added, such that
nvme_rdma_cm_msg() will display the proper error message if the target
fails the RDMA_CM_REQUEST command because of this extra validation.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Reorder include files to alphabetic order to simplify maintenance, and
separate local headers and global headers with a blank line.
No functional change intended.
Link: https://patch.msgid.link/r/7524b037cc05afe19db3c18f863253e1d1554fa2.1722644866.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Modules registering drivers with usb_serial_register_drivers() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
USB serial code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ johan: amend commit summary ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The last users of 'enum mmc_blk_status' and 'struct mmc_async_req'
were removed by commit 126b62700386 ("mmc: core: Remove code no longer
needed after the switch to blk-mq") in 2017, remove these two left-over
data structures.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240823225917.2826156-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 'mmc_context_info' structure is unused.
It has been introduced in:
- commit 2220eedfd7ae ("mmc: fix async request mechanism for sequential
read scenarios")
in 2013-02 and its usages have been removed in:
- commit 126b62700386 ("mmc: core: Remove code no longer needed after the
switch to blk-mq")
- commit 0fbfd1251830 ("mmc: block: Remove code no longer needed after
the switch to blk-mq")
in 2017-12.
Now remove this unused structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/232106a8a6a374dee25feea9b94498361568c10b.1724246389.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add tee_device_set_dev_groups() to TEE drivers to supply driver specific
attribute groups. The class specific attributes are from now on added
via the tee_class, which currently only consist of implementation_id.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20240814153558.708365-4-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A number of storage technologies support a specialised hardware
partition designed to be resistant to replay attacks. The underlying
HW protocols differ but the operations are common. The RPMB partition
cannot be accessed via standard block layer, but by a set of specific
RPMB commands. Such a partition provides authenticated and replay
protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver
interface which can be accessed by the optee driver to facilitate early
RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via
rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver
provides a callback to route RPMB frames to the RPMB device accessible
via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE
device driver itself.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Manuel Traut <manut@mecka.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240814153558.708365-2-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a new registration opcode IORING_REGISTER_CLOCK, which allows the
user to select which clock id it wants to use with CQ waiting timeouts.
It only allows a subset of all posix clocks and currently supports
CLOCK_MONOTONIC and CLOCK_BOOTTIME.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/98f2bc8a3c36cdf8f0e6a275245e81e903459703.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith
- Remove unused struct field (Nilay)
- Fix fabrics keep-alive teardown order (Ming)
- Write zeroes fixes (John)
* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
nvme: Remove unused field
nvme: move stopping keep-alive into nvme_uninit_ctrl()
block: Drop NULL check in bdev_write_zeroes_sectors()
block: Read max write zeroes once for __blkdev_issue_write_zeroes()
|
|
Remove redundant "e" in "assign(e)ments".
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240822123205.2186221-1-costa.shul@redhat.com
|
|
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-2-zhangtianyang@loongson.cn
|
|
Rename CPUHP_AP_IRQ_LOONGARCH_STARTING to CPUHP_AP_IRQ_EIOINTC_STARTING
because the upcoming AVECINTC irqchip driver will introduce a new state
and so both are clearly identifiable.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-3-zhangtianyang@loongson.cn
|
|
ARG_PTR_TO_KPTR is currently only used by the bpf_kptr_xchg helper.
Although it limits reg types for that helper's first arg to
PTR_TO_MAP_VALUE, any arbitrary mapval won't do: further custom
verification logic ensures that the mapval reg being xchgd-into is
pointing to a kptr field. If this is not the case, it's not safe to xchg
into that reg's pointee.
Let's rename the bpf_arg_type to more accurately describe the fairly
specific expectations that this arg type encodes.
This is a nonfunctional change.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-4-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a
const *"), the driver core can properly handle constant struct bus_type,
move the pci_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Link: https://lore.kernel.org/r/20240823074202.139265-1-kunwu.chan@linux.dev
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no longer any users of the platform data for davinci rawnand
in board files. We can remove the public pdata headers and move the
structures that are still used into the driver compilation unit while
removing the rest.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240814122120.13975-1-brgl@bgdev.pl
|
|
There are no more callers of thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), so drop them along with all of
the corresponding headers, code and documentation.
Moreover, because the .bind() and .unbind() thermal zone callbacks would
only be used when the above functions, respectively, were called, drop
them as well along with all of the code related to them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/4251116.1IzOArtZ34@rjwysocki.net
|
|
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
This call will always be made while holding the RTNL which ensures
that the SFP driver won't unbind from the device. The returned pointer
to the bus name will only be used while RTNL is held.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
filemap_create_folio() and do_read_cache_folio() were always allocating
folio of order 0. __filemap_get_folio was trying to allocate higher
order folios when fgp_flags had higher order hint set but it will default
to order 0 folio if higher order memory allocation fails.
Supporting mapping_min_order implies that we guarantee each folio in the
page cache has at least an order of mapping_min_order. When adding new
folios to the page cache we must also ensure the index used is aligned to
the mapping_min_order as the page cache requires the index to be aligned
to the order of the folio.
Co-developed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-3-kernel@pankajraghav.com
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need filesystems to be able to communicate acceptable folio sizes
to the pagecache for a variety of uses (e.g. large block sizes).
Support a range of folio sizes between order-0 and order-31.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Co-developed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-2-kernel@pankajraghav.com
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The iommu_report_device_fault function was updated to return void while
assuming that drivers only need to call iommu_report_device_fault() for
reporting an iopf. This implementation causes following problems:
1. The drivers rely on the core code to call it's page_reponse,
however, when a fault is received and no fault capable domain is
attached / iopf_param is NULL, the ops->page_response is NOT called
causing the device to stall in case the fault type was PAGE_REQ.
2. The arm_smmu_v3 driver relies on the returned value to log errors
returning void from iommu_report_device_fault causes these events to
be missed while logging.
Modify the iommu_report_device_fault function to return -EINVAL for
cases where no fault capable domain is attached or iopf_param was NULL
and calls back to the driver (ops->page_response) in case the fault type
was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers
to log the fault/event as needed.
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Closes: https://lore.kernel.org/all/6147caf0-b9a0-30ca-795e-a1aa502a5c51@huawei.com/
Fixes: 3dfa64aecbaf ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240816104906.1010626-1-praan@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC already checks for arguments that are marked with the "nonstring"[1]
attribute when used on standard C String API functions (e.g. strcpy). Gain
this compile-time checking also for the kernel's primary string copying
function, strscpy().
Note that Clang has neither "nonstring" nor __builtin_has_attribute().
Link: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-nonstring-variable-attribute [1]
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240805214340.work.339-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
|
|
key_lookup() will always return a key, even if that key is revoked
or invalidated. So check for invalid keys before continuing.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The users of this driver were removed in 2013 in commit 28633c54bda6
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Cross-merge bpf fixes after downstream PR including
important fixes (from bpf-next point of view):
commit 41c24102af7b ("selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp")
commit fdad456cbcca ("bpf: Fix updating attached freplace prog in prog_array map")
No conflicts.
Adjacent changes in:
include/linux/bpf_verifier.h
kernel/bpf/verifier.c
tools/testing/selftests/bpf/Makefile
Link: https://lore.kernel.org/bpf/20240813234307.82773-1-alexei.starovoitov@gmail.com/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
LSM hooks are currently invoked from a linked list as indirect calls
which are invoked using retpolines as a mitigation for speculative
attacks (Branch History / Target injection) and add extra overhead which
is especially bad in kernel hot paths:
security_file_ioctl:
0xff...0320 <+0>: endbr64
0xff...0324 <+4>: push %rbp
0xff...0325 <+5>: push %r15
0xff...0327 <+7>: push %r14
0xff...0329 <+9>: push %rbx
0xff...032a <+10>: mov %rdx,%rbx
0xff...032d <+13>: mov %esi,%ebp
0xff...032f <+15>: mov %rdi,%r14
0xff...0332 <+18>: mov $0xff...7030,%r15
0xff...0339 <+25>: mov (%r15),%r15
0xff...033c <+28>: test %r15,%r15
0xff...033f <+31>: je 0xff...0358 <security_file_ioctl+56>
0xff...0341 <+33>: mov 0x18(%r15),%r11
0xff...0345 <+37>: mov %r14,%rdi
0xff...0348 <+40>: mov %ebp,%esi
0xff...034a <+42>: mov %rbx,%rdx
0xff...034d <+45>: call 0xff...2e0 <__x86_indirect_thunk_array+352>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Indirect calls that use retpolines leading to overhead, not just due
to extra instruction but also branch misses.
0xff...0352 <+50>: test %eax,%eax
0xff...0354 <+52>: je 0xff...0339 <security_file_ioctl+25>
0xff...0356 <+54>: jmp 0xff...035a <security_file_ioctl+58>
0xff...0358 <+56>: xor %eax,%eax
0xff...035a <+58>: pop %rbx
0xff...035b <+59>: pop %r14
0xff...035d <+61>: pop %r15
0xff...035f <+63>: pop %rbp
0xff...0360 <+64>: jmp 0xff...47c4 <__x86_return_thunk>
The indirect calls are not really needed as one knows the addresses of
enabled LSM callbacks at boot time and only the order can possibly
change at boot time with the lsm= kernel command line parameter.
An array of static calls is defined per LSM hook and the static calls
are updated at boot time once the order has been determined.
With the hook now exposed as a static call, one can see that the
retpolines are no longer there and the LSM callbacks are invoked
directly:
security_file_ioctl:
0xff...0ca0 <+0>: endbr64
0xff...0ca4 <+4>: nopl 0x0(%rax,%rax,1)
0xff...0ca9 <+9>: push %rbp
0xff...0caa <+10>: push %r14
0xff...0cac <+12>: push %rbx
0xff...0cad <+13>: mov %rdx,%rbx
0xff...0cb0 <+16>: mov %esi,%ebp
0xff...0cb2 <+18>: mov %rdi,%r14
0xff...0cb5 <+21>: jmp 0xff...0cc7 <security_file_ioctl+39>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Static key enabled for SELinux
0xffffffff818f0cb7 <+23>: jmp 0xff...0cde <security_file_ioctl+62>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Static key enabled for BPF LSM. This is something that is changed to
default to false to avoid the existing side effect issues of BPF LSM
[1] in a subsequent patch.
0xff...0cb9 <+25>: xor %eax,%eax
0xff...0cbb <+27>: xchg %ax,%ax
0xff...0cbd <+29>: pop %rbx
0xff...0cbe <+30>: pop %r14
0xff...0cc0 <+32>: pop %rbp
0xff...0cc1 <+33>: cs jmp 0xff...0000 <__x86_return_thunk>
0xff...0cc7 <+39>: endbr64
0xff...0ccb <+43>: mov %r14,%rdi
0xff...0cce <+46>: mov %ebp,%esi
0xff...0cd0 <+48>: mov %rbx,%rdx
0xff...0cd3 <+51>: call 0xff...3230 <selinux_file_ioctl>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Direct call to SELinux.
0xff...0cd8 <+56>: test %eax,%eax
0xff...0cda <+58>: jne 0xff...0cbd <security_file_ioctl+29>
0xff...0cdc <+60>: jmp 0xff...0cb7 <security_file_ioctl+23>
0xff...0cde <+62>: endbr64
0xff...0ce2 <+66>: mov %r14,%rdi
0xff...0ce5 <+69>: mov %ebp,%esi
0xff...0ce7 <+71>: mov %rbx,%rdx
0xff...0cea <+74>: call 0xff...e220 <bpf_lsm_file_ioctl>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Direct call to BPF LSM.
0xff...0cef <+79>: test %eax,%eax
0xff...0cf1 <+81>: jne 0xff...0cbd <security_file_ioctl+29>
0xff...0cf3 <+83>: jmp 0xff...0cb9 <security_file_ioctl+25>
0xff...0cf5 <+85>: endbr64
0xff...0cf9 <+89>: mov %r14,%rdi
0xff...0cfc <+92>: mov %ebp,%esi
0xff...0cfe <+94>: mov %rbx,%rdx
0xff...0d01 <+97>: pop %rbx
0xff...0d02 <+98>: pop %r14
0xff...0d04 <+100>: pop %rbp
0xff...0d05 <+101>: ret
0xff...0d06 <+102>: int3
0xff...0d07 <+103>: int3
0xff...0d08 <+104>: int3
0xff...0d09 <+105>: int3
While this patch uses static_branch_unlikely indicating that an LSM hook
is likely to be not present. In most cases this is still a better choice
as even when an LSM with one hook is added, empty slots are created for
all LSM hooks (especially when many LSMs that do not initialize most
hooks are present on the system).
There are some hooks that don't use the call_int_hook or
call_void_hook. These hooks are updated to use a new macro called
lsm_for_each_hook where the lsm_callback is directly invoked as an
indirect call.
Below are results of the relevant Unixbench system benchmarks with BPF LSM
and SELinux enabled with default policies enabled with and without these
patches.
Benchmark Delta(%): (+ is better)
==========================================================================
Execl Throughput +1.9356
File Write 1024 bufsize 2000 maxblocks +6.5953
Pipe Throughput +9.5499
Pipe-based Context Switching +3.0209
Process Creation +2.3246
Shell Scripts (1 concurrent) +1.4975
System Call Overhead +2.7815
System Benchmarks Index Score (Partial Only): +3.4859
In the best case, some syscalls like eventfd_create benefitted to about
~10%.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
These macros are a clever trick to determine a count of the number of
LSMs that are enabled in the config to ascertain the maximum number of
static calls that need to be configured per LSM hook.
Without this one would need to generate static calls for the total
number of LSMs in the kernel (even if they are not compiled) times the
number of LSM hooks which ends up being quite wasteful.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Kui-Feng Lee <sinquersw@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: KP Singh <kpsingh@kernel.org>
[PM: added IPE to the count during merge]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
thermal_unbind_cdev_from_trip()
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3512161.QJadu78ljV@rjwysocki.net
|
|
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/9334403.CDJkKcVGEf@rjwysocki.net
|
|
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and Kernel parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Directly call into dma-iommu just like we have been doing for dma-direct
for a while. This avoids the indirect call overhead for IOMMU ops and
removes the need to have DMA ops entirely for many common configurations.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The hardware DMA limit might not be power of 2. When RAM range starts
above 0, say 4GB, DMA limit of 30 bits should end at 5GB. A single high
bit can not encode this limit.
Use a plain address for the DMA zone limit instead.
Since the DMA zone can now potentially span beyond 4GB physical limit of
DMA32, make sure to use DMA zone for GFP_DMA32 allocations in that case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
