| Age | Commit message (Collapse) | Author |
|---|
|
Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.
Fixes: 4e901018432e ("net: phy: phy_device: Call into the PHY driver to set LED blinking")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240626030638.512069-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Highlights this time are:
- cfg80211/nl80211:
* improvements for 6 GHz regulatory flexibility
- mac80211:
* use generic netdev stats
* multi-link improvements/fixes
- brcmfmac:
* MFP support (to enable WPA3)
- wilc1000:
* suspend/resume improvements
- iwlwifi:
* remove support for older FW for new devices
* fast resume (keeping the device configured)
- wl18xx:
* support newer firmware versions
* tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits)
wifi: brcmfmac: of: Support interrupts-extended
wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3
net: rfkill: Correct return value in invalid parameter case
wifi: mac80211: fix NULL dereference at band check in starting tx ba session
wifi: iwlwifi: mvm: fix rs.h kernel-doc
wifi: iwlwifi: fw: api: datapath: fix kernel-doc
wifi: iwlwifi: fix remaining mistagged kernel-doc comments
wifi: iwlwifi: fix prototype mismatch kernel-doc warnings
wifi: iwlwifi: fix kernel-doc in iwl-fh.h
wifi: iwlwifi: fix kernel-doc in iwl-trans.h
wifi: iwlwifi: pcie: fix kernel-doc
wifi: iwlwifi: dvm: fix kernel-doc warnings
wifi: iwlwifi: mvm: don't log error for failed UATS table read
wifi: iwlwifi: trans: make bad state warnings
wifi: iwlwifi: fw: api: fix some kernel-doc
wifi: iwlwifi: mvm: remove init_dbg module parameter
wifi: iwlwifi: update the BA notification API
wifi: iwlwifi: mvm: always unblock EMLSR on ROC end
wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API
...
====================
Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
"Removal of a struct member that's unused since the 6.10 merge window,
and a fix for a regression in SQPOLL wakeups, bringing it back to how
it worked before the SQPOLL local task_work"
* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
io_uring: remove dead struct io_submit_state member
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 70200574cc22 ("block: remove QUEUE_FLAG_DISCARD"),
blk_queue_flag_test_and_set() has not been used, so delete it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240627160735.842189-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these bugs
have gone unnoticed for many years, but I think we probably want to
backport them all to stable kernels, so it makes sense to have the
fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I
had mistakenly thought that this fix was already merged through the
module tree, but as Geert pointed out it was still missing"
* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
kallsyms: rework symbol lookup return codes
linux/syscalls.h: add missing __user annotations
syscalls: mmap(): use unsigned offset type consistently
s390: remove native mmap2() syscall
hexagon: fix fadvise64_64 calling conventions
csky, hexagon: fix broken sys_sync_file_range
sh: rework sync_file_range ABI
powerpc: restore some missing spu syscalls
parisc: use generic sys_fanotify_mark implementation
parisc: use correct compat recv/recvfrom syscalls
sparc: fix compat recv/recvfrom syscalls
sparc: fix old compat_sys_select()
syscalls: fix compat_sys_io_pgetevents_time64 usage
ftruncate: pass a signed offset
|
|
The routine is used by procfs through dir_emit_dots.
The combined RCU and lock fallback implementation is too big for an
inline. Given that the routine takes a dentry argument fs/dcache.c seems
like the place to put it in.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240627161152.802567-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make it possible to quickly check whether AT_EMPTY_PATH is valid.
Note, after some discussion we decided to also allow NULL to be passed
instead of requiring the empty string.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into usb-next
Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
subsystems due for the v6.11 merge window.
platform-drivers-x86-ib-lenovo-c630-v6.11-2:
platform-drivers-x86-ib-lenovo-c630-v6.11 +
platform-drivers-x86-lenovo-c630
for merging into the power/supply and USB subsystems for v6.11.
* tag 'platform-drivers-x86-ib-lenovo-c630-v6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/arm64: build drivers even on non-ARM64 platforms
platform: arm64: add Lenovo Yoga C630 WOS EC driver
dt-bindings: platform: Add Lenovo Yoga C630 EC
|
|
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This is the same logic than hid_hw_raw_request or hid_hw_output_report:
we can allow hid_bpf_try_input_report to be called from a hook on
hid_input_report if we ensure that the call can not be made twice in a
row.
There is one extra subtlety in which there is a lock in hid_input_report.
But given that we can detect if we are already in the hook, we can notify
hid_input_report to not take the lock. This is done by checking if
ctx_kern data is valid or null, and if it is equal to the dedicated
incoming data buffer.
In order to have more control on whether the lock needs to be taken or not
we introduce a new kfunc for it: hid_bpf_try_input_report()
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-11-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
hid_bpf_input_report() is already marked to be used in sleepable context
only. So instead of hammering with timers the device to hopefully get
an available slot where the device is not sending events, we can make
that kfunc wait for the current event to be terminated before it goes in.
This allows to work with the following pseudo code:
in struct_ops/hid_device_event:
- schedule a bpf_wq, which calls hid_bpf_input_report()
- once this struct_ops function terminates, hid_bpf_input_report()
immediately starts before the next event
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-9-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Same story than hid_hw_raw_requests:
This allows to intercept and prevent or change the behavior of
hid_hw_output_report() from a bpf program.
The intent is to solve a couple of use case:
- firewalling a HID device: a firewall can monitor who opens the hidraw
nodes and then prevent or allow access to write operations on that
hidraw node.
- change the behavior of a device and emulate a new HID feature request
The hook is allowed to be run as sleepable so it can itself call
hid_hw_output_report(), which allows to "convert" one feature request into
another or even call the feature request on a different HID device on the
same physical device.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-7-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When we attach a sleepable hook to hid_hw_raw_requests, we can (and in
many cases should) call ourself hid_bpf_raw_request(), to actually fetch
data from the device itself.
However, this means that we might enter an infinite loop between
hid_hw_raw_requests hooks and hid_bpf_hw_request() call.
To prevent that, if a hid_bpf_hw_request() call is emitted, we prevent
any new call of this kfunc by storing the information in the context.
This way we can always trace/monitor/filter the incoming bpf requests,
while preventing those loops to happen.
I don't think exposing "from_bpf" is very interesting because while
writing such a bpf program, you need to match at least the report number
and/or the source of the call. So a blind "if there is a
hid_hw_raw_request() call, I'm emitting another one" makes no real
sense.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-5-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This allows to intercept and prevent or change the behavior of
hid_hw_raw_request() from a bpf program.
The intent is to solve a couple of use case:
- firewalling a HID device: a firewall can monitor who opens the hidraw
nodes and then prevent or allow access to write operations on that
hidraw node.
- change the behavior of a device and emulate a new HID feature request
The hook is allowed to be run as sleepable so it can itself call
hid_bpf_hw_request(), which allows to "convert" one feature request into
another or even call the feature request on a different HID device on the
same physical device.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-4-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We want to add sleepable callbacks for hid_hw_raw_request() and
hid_hw_output_report(), but we can not use a plain RCU for those.
Prepare for a SRCU so we can extend HID-BPF.
This changes a little bit how hid_bpf_device_init() behaves, as it may
now fail, so there is a tiny hid-core.c change to accommodate for this.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-3-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This allows to know who actually sent what when we process the request
to the device.
This will be useful for a BPF firewall program to allow or not requests
coming from a dedicated hidraw node client.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-2-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The ROHM BD96801 PMIC is highly customizable automotive grade PMIC
which integrates regulator and watchdog funtionalities.
Provide INTB IRQ and register accesses for regulator/watchdog drivers.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/c5260e2dd222e3c64cdf410802bba195637ccb93.1719473802.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
For !CONFIG_BLK_DEV_INTEGRITY, rq_integrity_vec() wasn't updated
properly. Fix it up.
Fixes: cf546dd289e0 ("block: change rq_integrity_vec to respect the iterator")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 7 are cc:stable.
All are MM related apart from a MAINTAINERS update. There is no
identifiable theme here - just singleton patches in various places"
* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: don't require head page for do_set_pmd()
mm/page_alloc: Separate THP PCP into movable and non-movable categories
nfs: drop the incorrect assertion in nfs_swap_rw()
mm/migrate: make migrate_pages_batch() stats consistent
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
selftests/mm:fix test_prctl_fork_exec return failure
mm: convert page type macros to enum
ocfs2: fix DIO failure due to insufficient transaction credits
kasan: fix bad call to unpoison_slab_object
mm: handle profiling for fake memory allocations during compaction
mm/slab: fix 'variable obj_exts set but not used' warning
/proc/pid/smaps: add mseal info for vma
mm: fix incorrect vbq reference in purge_fragmented_block
|
|
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two patches to fix kworker name formatting"
* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Increase worker desc's length to 32
workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.
Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.
|
|
Add a helper function that allow regulator consumers to allow low-level
HW access, in order to enable/disable regulator in atomic context.
The use-case for RZ/G2L SoC is to enable VBUS selection register based
on vbus detection that happens in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The of_syscon_register_regmap() API allows an externally created regmap
to be registered with syscon. This regmap can then be returned to client
drivers using the syscon_regmap_lookup_by_phandle() APIs.
The API is used by platforms where mmio access to the syscon registers is
not possible, and a underlying soc driver like exynos-pmu provides a SoC
specific regmap that can issue a SMC or hypervisor call to write the
register.
This approach keeps the SoC complexities out of syscon, but allows common
drivers such as syscon-poweroff, syscon-reboot and friends that are used
by many SoCs already to be re-used.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621115544.1655458-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all updates go through blk_validate_limits the default of 511
is set at initialization time. Also remove the unused NULL check as
calling this helper on a NULL queue can't happen (and doesn't make
much sense to start with).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mark blk_apply_bdi_limits non-static and open code disk_update_readahead
in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
... and let sparse help us catch mismatches or abuses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a flag for ->flags and not a feature for ->features. And fix the
one place that actually incorrectly cleared it from ->features.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Device mapper sends flush bios to all the targets and the targets send it
to the underlying device. That may be inefficient, for example if a table
contains 10 linear targets pointing to the same physical device, then
device mapper would send 10 flush bios to that device - despite the fact
that only one bio would be sufficient.
This commit optimizes the flush behavior. It introduces a per-target
variable flush_bypasses_map - it is set when the target supports flush
optimization - currently, the dm-linear and dm-stripe targets support it.
When all the targets in a table have flush_bypasses_map,
flush_bypasses_map on the table is set. __send_empty_flush tests if the
table has flush_bypasses_map - and if it has, no flush bios are sent to
the targets via the "map" method and the list dm_table->devices is
iterated and the flush bios are sent to each member of the list.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Suggested-by: Yang Yang <yang.yang@vivo.com>
|
|
power_supply_maintenance_charge_table
'struct power_supply_maintenance_charge_table' is not modified in this
driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4087 4552 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6caafd0ac2556a40405273b1a4badc508ea8e9b0.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
'struct power_supply_vbat_ri_table' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
955 7664 0 8619 21ab drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d01818abd880bf435d1106a9a6cc11a7a8a3e661.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/49d1afaa-f934-6ed2-a678-e0d428c63a65@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This macro is misleading as
TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE
. The only user was updated to use TIM_DIER_CCxIE() instead which
doesn't suffer from this mismatch, so TIM_DIER_CC_IE can be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/6c8fcc4ed159992a1dbb0796087e6ceb10c39c96.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are some registers that belong together and are numbered from 1 to
4. Introduce a macro definition for these that takes the channel number
as parameter and define the previously available constants using the new
ones.
This allows to simplify some users that up to now use constructs like
TIM_CCER_CC1NE << (ch * 4)
which is an ugly mix of using a predefined value and still knowing
internal details about it.
Note that there are several decrements by 1 involved. These are
necessary because software guys start counting at 0 while the hardware
designer started at 1 (and having TIM_CCER_CCxE(1) be TIM_CCER_CC2E
isn't a sane option). The compiler is expected to optimize these out
nicely.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/05df15f61dde81033407d3b4fcb67ee403ecc8db.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use tabs consistently for indention and properly align register names,
values and comments. This improves readability (at least for my eyes).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/da3b7f9af5794d7463aa62cbaa7251abf1af2018.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Scheduling reset_work after a nvme subsystem reset is expected to fail
on pcie, but this also prevents potential handling the platform's pcie
services may provide that might successfully recovering the link without
re-enumeration. Such examples include AER, DPC, and power's EEH.
Provide a pci specific operation that safely initiates a subsystem
reset, and instead of scheduling reset work, read back the status
register to trigger a pcie read error.
Since this only affects pci, the other fabrics drivers subscribe to a
generic nvmf subsystem reset that is exactly the same as before. The
loop fabric doesn't use it because nvmet doesn't support setting that
property anyway.
And since we're using the magic NSSR value in two places now, provide a
symbolic define for it.
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When creating a QP, one of the attributes is TS format (timestamp).
In some devices, we have a limitation that all QPs should have the same
ts_format. The ts_format is chosen based on the device's capability.
The qp_ts_format cap resides under the RoCE caps table, and the
cap will be 0 when RoCE is disabled. So when RoCE is disabled, the
value that should be queried is sq_ts_format under HCA caps.
Consider the case when the system supports REAL_TIME_TS format (0x2),
some QPs are created with REAL_TIME_TS as ts_format, and afterwards
RoCE gets disabled. When trying to construct a new QP, we can't use
the qp_ts_format, that is queried from the RoCE caps table, Since it
leads to passing 0x0 (FREE_RUNNING_TS) as the value of the qp_ts_format,
which is different than the ts_format of the previously allocated
QPs REAL_TIME_TS format (0x2).
Thus, to resolve this, read the sq_ts_format, which also reflect
the supported ts format for the QP when RoCE is disabled.
Fixes: 4806f1e2fee8 ("net/mlx5: Set QP timestamp mode to default")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/32801966eb767c7fd62b8dea3b63991d5fbfe213.1718554199.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
subsystems due for the v6.11 merge window, which is required for the
Lenovo C630 battery driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
As being shown from a subsequent change to genpd, it's useful to understand
if a device's OF node has an OPP-table described and whether it contains
OPP nodes that makes use of the required-opps DT property.
For this reason, let's introduce an OPP OF helper function called
dev_pm_opp_of_has_required_opp().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add the Edimax Vendor ID (0x1432) for an ethernet driver for Tehuti
Networks TN40xx chips. This ID can be used for Realtek 8180 and Ralink
rt28xx wireless drivers.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20240623235507.108147-2-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DIM-related mode and work have been collected in one same place,
so new interfaces are added to provide convenience.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-5-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Useful macros will be used effectively elsewhere.
These will be utilized in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'qcom/20240430-a750-raytracing-v3-2-7f57c5ac082d@gmail.com' into msm-next-robclark
Merge qcom drivers to pick up dependency for SMEM based speedbin.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Since all users were converted to the new cleanup based helper,
adis_dev_lock() and adis_dev_unlock() can now be removed from the lib.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-9-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add two new lock helpers that make use of the cleanup guard() and
scoped_guard() macros. Thus, users won't have to worry about unlocking
which is less prone to errors and allows for simpler error paths.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-3-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
